From the Sector

• New air purification and sulfur recovery plant up and running at the Lenzing facility
• Another step closer to meeting sustainability and climate targets
• Self-sufficiency in raw materials further enhanced

Lenzing Group is continuing to make great strides toward achieving carbon neutrality across the Group. The successful completion and commissioning of an air purification and sulfur recovery plant at the Lenzing facility marks another milestone in the Group’s ambitious strategy. Lenzing has invested some EUR 40 mn in this project since construction began in 2019.

Using state-of-the-art technology, the plant will enable carbon emissions to be reduced by 15,000 metric tons at the Lenzing facility. This will also make the group more self-sufficient in securing vital raw materials for processing, which will bolster the site’s competitive standing in terms of sustainability.

“As a result of this investment, Lenzing has made further progress towards implementing its climate targets, while achieving much greater autonomy with regard to one of its core raw materials”, says Christian Skilich, Member of the Managing Board at Lenzing Group.

In 2019, Lenzing set the strategic target of halving its group-wide greenhouse gas emissions per ton of product by 2030. Its goal for 2050 is to achieve climate neutrality.

Combining expertise for more sustainable fashion
Ever wonder how much water was used to make your favorite cotton T-shirt? About 2,700 liters, or roughly three years of drinking water. What first comes to mind is probably the water that was essential to growing the cotton crop. Surprisingly, cotton is a drought-tolerant plant, and often less recognized is the strain that can be put on water resources to dye cotton textiles.

Progress is being made across the industry to lessen the strain on our precious water resources. Over the past several years, Dow collaborated with Cotton Incorporated to research and validate their product, ECOFAST™ Pure Sustainable Textile Treatment, that can help drastically reduce water and chemical use during the dyeing process. Major fashion brands are integrating it into their supply chain to dye more sustainably, without sacrificing color or quality.

Problem
Cotton dyeing is very resource-intensive and puts strain on local waterways. A large amount of water is used in the dyeing process – up to 5 trillion liters a year, or nearly enough to supply all of humanity with drinking water. Significant amounts of chemicals and dye are needed to get the desired colors consumers expect too. This is part of the reason textile mills account for 20% of industrial water pollution globally. Wastewater from the dyeing process can be polluting and require costly treatment and these challenges are found in regions that already face water scarcity.

Solution
Reforming processes in an industry as established as textiles is no easy feat. Collaboration across the sector is needed to bring about sustainable change. With that in mind, Cotton Incorporated approached Dow. They wanted help scaling a cotton technology to support more sustainable textile dyeing.Leveraging Cotton Incorporated’s industry expertise and Dow’s material science knowledge, they worked together to understand and validate the benefits of our patented ECOFAST™ Pure Sustainable Textile Treatment.

How can colors be more responsible?  
ECOFAST™ Pure is a pretreatment applied before the dyeing process to produce cationic cotton. This means the charge of cotton is permanently changed from negative to positive, so it acts like a magnet to attract negatively charged dye to the material. How does that benefit the textile mill? It significantly decreases the amount of water, chemicals, dye and energy needed to color cotton. A third party reviewed and validated life cycle assessment, available by request, helped further prove the benefits.

"ROICA™ new identity is the ultimate upgrade and milestone of the brand’s evolution path which brings together and merges performance, innovation and responsible imprint. ROICA™ strategic commitment is built on two main pillars that meet value driven consumer’s expectations: first, continuous R&D and innovation activities focusing on new contemporary stretch functionalities with the highest integration of sustainability. Second, developing synergies and partnerships with leading responsible innovators throughout the whole value chain from throwsters down to consumers, people and companies sharing the same goals", declares Shinichiro Haga, Senior Executive Manager of ROICA Division.

ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

Balanced geometries, calibrating color and different anatomical details: the visual identity is then declined in 5 different designs, each for one of the 5 applications that can be enhanced by ROICA™ yarns: ACTIVATION for performative sportswear garments, AQUA for smooth swimwear, STYLE#FIT for casual wear and athleisure, ESSENTIALS for next to skin lingerie and underwear and LEGWEAR for stylish hosiery. A complete wardrobe.

The company also created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family for complete transparency and transparent authentic communication.

Constant investments in R&D, people and technology allowed the company to engineer agile, multi-facetted and sustainable stretch yarns which redefine the new circularity, delivering the style, support and finish, trusted to match the performance demands and ambitions of the new generation contemporary consumer.

Todd Zimmerman, a long-time graphic arts executive with a strong track record of growing advanced technology initiatives in print, has joined Electronics For Imaging, Inc. as its new vice president and general manager, Display Graphics.

He comes to EFI™ from Fujifilm® USA, where he spent a decade and a half in a variety of executive roles, most recently as division president and corporate VP of Fujifilm Global Graphic Systems. Prior to joining Fujifilm, Zimmerman worked in sales with Kodak Polychrome Graphics.

Zimmerman assumes his new role at a time when many EFI customers are growing their businesses to meet recovery-fuelled, post-pandemic business needs, especially in key application areas, such as point-of-purchase graphics, tradeshow and event signage, and environmental graphics and décor. As print businesses regain their momentum, Zimmerman will lead EFI’s largest inkjet business segment, a Display Graphics business that is among the world’s largest developers of superwide-format UV LED and dye-sublimation inkjet printers and inks.

A broad coalition of industry organizations and labor unions, representing a broad spectrum of manufacturers and workers who stepped up to make essential personal protective equipment (PPE) throughout the COVID-19 pandemic, sent a letter to Senate Majority Leader Chuck Schumer (D-NY) and Senate Minority Leader Mitch McConnell (R-KY) expressing strong support for the inclusion of robust domestic procurement policies for PPE in the U.S. Innovation and Competition Act (USICA) currently being considered by the Senate.

See the coalition’s full letter here.

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

NOVARA also enables unique lifestyle product innovations at lower production cost for fashion, sportswear, technical clothing, and upholstery such as combining sustainable odour control, skin care additives, and fragrance finishing, without impacting breathability, hand feel or wicking. It is suitable for finishing all fabric types, from 50 - 1000 gsm, including polyester, cotton, nylon and polycotton.

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

• The FlexoCleanerBrush™, a solution to enhance print quality and improve worker safety in corrugated printing.
• The FlexoCleanPick™, a system designed to automatically remove hickeys—typically caused by paper fibers, dust and ink contamination, and other causes of printing defects—from the plate during the print run without stopping the press or requiring operator skin contact with wash agents.
• The FlexoDry2™, a fully integrated IR drying system, specifically developed for corrugated flexo printing presses, that reduces energy consumption by up to 30 percent over standard IR dryers via the use of patented Diamond IR™ lamps.
• A new generation of LED-UV technology—designed by AMS Spectral UV, a Baldwin Technology company, for wide-format flexo corrugated box printing—represents the latest in solid-state LED curing innovations and offers more than a 50 percent reduction in power consumption, compared to traditional UV systems, in an ultra-compact lamphead that fits at the end of the press or between printing units.

You can register here.

The textile industry is constantly searching for new, sustainable, and circular materials. Following thorough research and testing, Spinnova and KT Trading have developed a natural leather fabric made from leather waste without harmful chemicals.

"Leather is an amazing high-quality material with unique properties. With this new textile, we have taken yet another step towards completing the circular economy for leather," says Kristian Geert Jensen, CEO of KT Trading, who now has a joint venture with Spinnova.

Spinnova CEO: Sustainable innovation
Together with KT Trading, ECCO’s key leather provider, Spinnova has established the Respin company - a new joint venture. The partners are already constructing a leather fibre production pilot plant in Finland.

ECCO’s Applied Research division and Spinnova have been in a R&D collaboration since 2018 and have made successful trials with spinning the protein biomass into fibre. Processing leather raw material does not require further technology development from Spinnova. The company already has proof of concept from using the method on wood-based raw material.

RINCO ULTRASONICS is strengthening its market presence in Central America – a significant market for the automotive supply industry – by opening its own subsidiary in Mexico.

Romanshorn, May 2021 – With the establishment of its eleventh global subsidiary and its first in Central America, RINCO ULTRASONICS is highlighting the importance of the Central American market. “The automotive supply industry is one of the strongest sectors of industry in Mexico and one of the most important markets for RINCO. Our subsidiary in Querétaro, which is located 200 km away from Mexico City, will bring us closer to customers and partners alike,” explains Serge Patamia, CEO of RINCO ULTRASONICS. “We already enjoy high levels of confidence from both customers and partners in the region, and local presence will only serve to improve this. Investing in a dedicated subsidiary underlines our commitment to the market in Central America.”

José Armando Vázquez, the newly appointed country manager for Mexico, brings both passion and specialist expertise to his role. Having grown up in the automotive industry, Vazquez knows the needs and requirements of the supplying industry and the plastics sector inside out.

In José Armando Vázquez, customers and interested parties in Mexico have a local point of contact who is bringing Swiss perfection to Querétaro in the form of RINCO ULTRASONICS MEXICO. In addition to sales, RINCO in Mexico also offers technical services such as an application-based test laboratory and various service facilities to promote the building of partnerships and the delivery of new projects.
“Our aim is to captivate users with our ultrasonic technology and offer them tangible added value so that by using solutions like our AGM Pro ultrasonic generator, for example, they can save time and user fewer materials,”, says Serge Patamia, summarising what customers in Central America can expect.

Archroma, a global leader in specialty chemicals towards sustainable solutions, announced the release of its Sustainability Report for its fiscal year 2020.

Prepared again in accordance with the Global Reporting Initiative (GRI) standards, and building on a strong track record, the report outlines the company’s progress on its priority sustainability topics, such as human health and environmental safety, resource efficiency, sustainable sourcing and product stewardship, as well as diversity & inclusion, and talent management.

For the first time Archroma conducted a survey with its stakeholders to confirm the relevance of the sustainability topics covered in the report. These include biodiversity, occupational and product safety, and fair labor practices, as well as maybe less expected topics such as compliance, economic performance, and culture.

The report can be downloaded at: www.archroma.com/sustainability.