From the Sector

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

ROICA™ discloses five key and influencing brands with unique outfits already available in the market, that demonstrate how ROICA™ is able to deliver and transform basic performant stretch in eco hi-tech valuable innovations interpreted in five, completely different, contemporary lifestyles!

Inspired by the need for style-conscious, sustainable garments that are versatile for every life situation, AEANCE was created as a brand that merges ready-to-wear with technical apparel. The brand`s values are timeless minimalism, substance and understated luxury. Less, but better. AEANCE is committed to creating garments with the least possible impact on the environment and has set up a supply chain focusing on eco-sustainability and ethical responsibility. The Women`s Light Padded Jacket of the look selected for ISPO is the result of a collaboration with the acclaimed industrial designer Konstantin Grcic.

Knowing the transformative power of fitness, DAQUÏNI® was founded in 2012 to help women bridge the gap between how they feel and how they think they look when they are working out. Each DAQUÏNI® item is made in the E.U. from highest quality Oeko-Tex® certified materials. The brand’s first choice in fabrics is SOFILETA (founded in 1911) with its luxurious technical fabrics with ROICA™ V550 premium stretch awarded with Cradle-to-Cradle Innovation Institute’s GOLD LEVEL material health certificate.

The New York based brand Erin Snow creates chemically safe, circularly designed, socially fair luxury performance apparel. The Teri pant is Erin Snow's most innovative and highly anticipated pant to date. Teri is made from the finest bluesign® approved Schoeller 4-way stretch fabric containing ROICA™ V550 premium stretch sustainable fiber. The pant is insulated with PrimaLoft® Gold Luxe and repels water and dirt without PFCs, thanks to Schoeller's ecorepel® Bio finishing while giving maximum freedom of movement.

The SCOTT Racing Team, the Italian Mtb Pro Rider Team born in 1988, selected the high performance for active clothing identifying Rosti, SITIP and ROICA™ as strategic partners to ensure unique and performant biking outfit composed by tights and jacket. Made with the special BEHOT fabric by SITIP, constructed with active performance materials belonging to the ROICA Feel Good™ family, it not only insulates, but generates up to 2 degrees of heat as you workout as certified by CeRism, Outdoor Sport Research Centre at Verona University. Long life stretch, superior shape retention and best breathability thanks to the Blizzard by SITIP fabric that ensures thermal comfort and easy care to the users. A valuable choice that perfectly matches the performances of an experienced team of specialists.

SITA hits the European panorama for the first time at ISPO with ROICA™ few days after the official launch in US and Saudi Arabia on January 31st. Its high-tech debut collection for Spring 2019 provides women with an all-new luxury concept of timeless foundational apparel made in New York balancing concealed performance features and style to meet womens’everyday dynamic lifestyle. The newly-created made in Italy SITATECH™ fabric includes permanent agents that neutralize odor, withstand machine wash, and exhibit superior quality. The intricately designed fabric takes on instant appeal with nanotechnology fibers and ROICA™ CF, a yarn with an active smart odor neutralizer property, then knitted in Italy by Maglificio Ripa.

After the success of the two first editions, JEC World organizes the third edition of Startup Booster, the leading startup competition in Composites, where ten startups will present their innovation in front of a jury of experts.

EC Group launched Startup Booster programme in 2017 to get closer to the startup world, to attract the new generation of composites entrepreneurs and put them at the forefront of the industry.

The program gives the floor to 10 startups, each of them having five minutes to present their innovation, on March 12, 2019, from 10.30 AM in Agora Stage (Hall 5) in front of a jury of experts from the composites industry.

These 10 startups will be also showcasing within the Startup Booster Village, during the three days, and will benefit from a dedicated program, including workshops with Startup Booster Main Innovation partners’ Airbus & Daimler, and Innovation partner’s Altair.

“Daimler being one of the main Innovation Partner of the Startup Booster, we are looking for innovations, in particular sustainable technologies and processes”, said Dr. Karl-Heinz FUELLER, Responsible for material innovations and BIW concept development, Daimler AG.

“As a main Innovation Partner of the Startup Booster competition we get fantastic direct engagement with the innovators who are defining solutions for the future”, said Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite at Airbus.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

During production, some of the aniline stays locked into the indigo pigment and is difficult to wash off the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. As a result of its toxicity (more hazardous than alkylphenols) it is now starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers.

The new Denisol® Pure Indigo 30 liq was therefore developed as an aniline-free* indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Archroma tested Denisol® Pure Indigo at Absolute Denim mill in Thailand. Archroma wanted to be sure that the new indigo dye would perform exactly the same as conventional indigo.

James Carnahan, Head of Sustainability at Archroma, comments: “At Archroma we continuously challenge the status quo in the deep belief that we can make our industry sustainable - but we cannot do it alone. Without forward-thinking manufacturers such as Absolute Denim to consciously adopt these eco-advanced innovations in their daily production, like our aniline-free* Denisol® Pure Indigo, we will not be able to move this industry forward on our resource-constrained world we live in. As consumers are increasingly aware of, and concerned about, climate change and ecological threats, this is not only the right thing to do - it is also good for business.”

“Deep down inside most of us want the world to be a better place for our loved ones and for future generations,” insists Vichai Phromvanich, Board Member, Absolute Denim, “starting with how we live, what we eat, what we wear, still trying to be cool, fashionable, still trying to be environmentally conscious. Archroma’s aniline free indigo project is therefore something we as a new generation manufacturer have supported from the beginning, by opening our doors for tests in the project phase, and now by sending out our articles to many of our customers. For us, after all, a nice pair of jeans looks even nicer without aniline!”

* Below limits of detection

Decline in revenue due to lower prices for standard viscose, less favorable currencies and lower production volume

• Pressure on prices for key raw materials remains high
• Positive impact due to focus on specialty fibers and further optimization of the product mix
• Expansion project in Mobile temporarily mothballed
• Acquisition of the remaining 30 percent of Lenzing (Nanjing) Fibers Co. Ltd.

The Lenzing Group recorded a solid business development in the first three quarters of 2018. The decline in revenue and earnings compared with the same period of the previous year was essentially based on a mix of lower prices for standard viscose, more unfavorable exchange rates and price increases for key raw materials. The Lenzing Group’s strategic orientation with a focus on specialty fibers had a positive impact in this environment.

Revenue decreased by 5.2 percent to EUR 1,636.2 mn over the comparative period of the previous year. Apart from the high starting base, this was primarily attributable to the expected challenging market environment for standard viscose, less favorable exchange rates and lower production volume. EBITDA (earnings before interest, tax, depreciation and amortization) recorded a decline by 26.8 percent to EUR 290.6 mn due to price increases for key raw materials and higher energy and dissolving wood pulp prices. The EBITDA margin dropped from 23 percent in the first three quarters of the previous year to 17.8 percent. EBIT (earnings before interest and tax) fell by 36.2 percent to EUR 190.3 mn, leading to a lower EBIT margin of 11.6 percent (01-09/2017: 17.3 percent). Net profit for the period dropped by 39 percent from EUR 219.3 mn in the previous year to EUR 133.8 mn. Earnings per share equaled EUR 5.06 (01-09/2017: EUR 8.12).

“The Lenzing Group is currently operating in a challenging environment. Against this background, we are satisfied with the solid business development and the corporate strategy sCore TEN has a positive impact. The new production line in Heiligenkreuz started up successfully and customers’ feedback has been positive,” says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “While many viscose producers are faced with a very tense profit situation, we are well positioned due to our specialty strategy and still expect a satisfactory full year”, Doboczky adds.

Key strategic measures were implemented during the first three quarters of 2018 in line with the sCore TEN strategy. The start-up of new capacities for lyocell fibers in Heiligenkreuz, the production start of LENZING™ ECOVERO™ fibers at the Nanjing site and the investment in another pilot line for TENCEL™ Luxe filaments are important steps to accomplish the goal of increasing the share of specialty fibers in total revenue.

Project in Mobile temporarily mothballed
Due to the decision to temporarily mothball the lyocell expansion project in Mobile, Alabama (USA), in view of the buoyant US labor market and trade tensions between the major trading blocks, the implementation of the expansion plan for specialty staple fibers will be slowed down. The Lenzing Group will put all its effort to readjust the execution of its growth plan to meet strong market demand for its lyocell fibers. This includes an increased focus on the lyocell expansion project in Prachinburi (Thailand).

Advancing forward solutions
Regarding the capacity expansion for specialty products such as TENCEL™ Luxe filaments and LENZING™ ECOVERO™ viscose fibers, Lenzing is still on track. After the introduction of TENCEL™ Luxe branded lyocell filament yarns in the previous year, Lenzing continues to drive innovations in the area of the value chain. In September, the company also announced the successful development of the LENZING™ Web Technology, a new technology platform focusing on sustainable nonwoven products, which will lead to new market opportunities for the industry. Following several years of research and development work and investments totaling EUR 26 mn, the pilot plant at the headquarters in Lenzing has been successfully put into operation.

Largest dissolving wood pulp line worldwide
At the end of June, the Lenzing Group and Duratex, the largest producer of industrialized wood panels of the southern hemisphere, announced that they had agreed on the terms and conditions to form a joint venture to investigate building the largest single line dissolving wood pulp plant in the state of Minas Gerais (Brazil). This decision supports the self-supply with dissolving wood pulp and the growth in specialty fibers. The joint venture is investigating the construction of a 450,000 t dissolving wood pulp plant, which is expected to become the largest and most competitive single line dissolving wood pulp plant in the world. The final investment decisionto build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Acquisition of Chinese operation
At the beginning of November the takeover by the Lenzing Group of the remaining 30 percent of its Chinese subsidiary Lenzing (Nanjing) Fibers Co. Ltd. (LNF) from its state-owned joint venture partner NCFC was completed. After closing of the transaction, the Lenzing Group will hold 100 percent of LNF. The acquisition will have a negative impact on net profit of approx. EUR 21 mn for the fiscal year 2018. The purchase of the shares supports Lenzing’s strategic growth as a producer of specialty fibers from the renewable raw material wood in China and worldwide. It paves the way to setting up further production lines for specialty fibers. Lenzing wants to convert LNF into a specialty fibers hub over time.

Expansion of capacities
CAPEX (investments in intangible assets and property, plant and equipment) rose by 35.5 percent year-on-year to EUR 174.1 mn in the first three quarters of 2018. This is primarily attributable to capacity expansions in Heiligenkreuz and the expansion of the existing dissolving wood pulp plant in Lenzing as well as the investments made so far in Mobile.

Outlook
Demand development on the global fiber market remains positive. Lenzing expects wood-based cellulosic fibers to continue to grow at a higher rate than the overall fiber market. In a challenging market environment the Lenzing Group expects solid results for 2018, albeit lower than in the outstanding last two years.

For 2019, Lenzing expects standard viscose markets to remain under pressure because of an ongoing oversupply and very high raw material prices. Lenzing’s specialty fiber business is expected to continue the very positive development.

The above-mentioned development reassures the Lenzing Group in its chosen corporate strategy sCore TEN. Lenzing is very well positioned in this market environment and will continue its consistent focus on growth with specialty fibers.

• Textile Exchange’s Sustainability Conference - Milan, October 22-24, 2018
• The theme of the 2018 conference is United by Action: Accelerating Sustainability in Textiles and Fashion.

The conference offers an opportunity to connect with industry pioneers and learn about cutting edge solutions and innovations in textile and apparel sustainability. As a result, C.L.A.S.S., headquartered in Milan, the global resource for smart material innovation, education, marketing and communication, will be on hand to support this year’s theme.

Many of the materials the C.L.A.S.S. team will showcase speak to circular economy such as Re.VerSo™, Bemberg™ and ROICA™ by Asahi Kasei, Iluna Group and TINTEX Textiles and many others that use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

During Textile Exchange’s Sustainability Conference, Giusy Bettoni, C.L.A.S.S. CEO and Founder and her team will have a dedicated space to engage attendees in an open discussion regarding the importance of fashion business strategies. The experience in the space, that will reflect an New York event created for C.L.A.S.S. by Ginger Design, will start with the vision of a film by Cristina Picchi that represents harmony between the various phases of the textile process and the cycles of natural elements. Visitors will walk through a three-dimensional installation designed by Cécile Feilchenfeldt to inspire creativity and explore the limitless possibilities using innovative smart materials.

“We are always proud to have a presence at international events including this year’s Textile Exchange’s Sustainability Conference. It is a great way for us to share our expertise regarding responsible innovation and new business model strategies. As C.L.A.S.S. is headquartered in Milan, we are proud that they selected our city for this year’s conference. Being held in Milan provides a chance for us to support Textile Exchange regarding smart material innovation, many of them produced in Italy.” said Bettoni.

Just off their return from Première Vision in Paris, Bettoni who is also the Sustainability Consultant for Smart Creation, recognizes the importance for her company to have a strong international presence to spread C.L.A.S.S.’ message to a global audience regarding responsible creation. 

As C.L.A.S.S. enters their second decade of business, they have expanded their business activities to include e-commerce that provides an opportunity for fashion start-up to purchase up to a maximum of 50, an initiative launched to support fashion start-ups. And a new division, C.L.A.S.S. Education, an initiative Bettoni co-founded with James Mendolia, also a Professor, Fashion Institute of Technology. Mendolia has been visiting universities to speak to fashion design, business, textiles and production students in Europe, Asia and North America to encourage attendees to infuse a new way of design thinking and move from a linear to a circular business model.   

• @ Premiere Vision, Paris, 19-21st September, Booth 6G62 - 6H63

The story of a Bemberg™ heritage that has shaped a new future for smart innovation through research, knowledge and expertise to deliver the new face of Bemberg™, the one true original material for modern living. The presentation of the Bemberg™ new campaign represents a high benchmark in value for smart textile fiber innovations, and one that is built on a long heritage of innovations since 1931. Bemberg™ is the ONE new material definition for responsible luxury. The ONE for cool exquisite comfort, and the ONE whose smart heritage is born in a circular economy.

Made by Asahi Kasei, the company is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel. The new campaign will amplify this uniqueness and innate smartness, redefining the brand voice as Bemberg™ at an international level with an openness and positive approach that facilitates a stronger, more focused role in the market while supporting our partner’s strengths too.

It is not just another brand name, but about enhancing core values through a now even better, more refined product and process that supports our partner’s mission to materially benefit the whole supply chain with beautiful products and open, honest communication. This is the key reason to launch the Bemberg™ global brand, taking the next steps on a journey that redefines a new future of contemporary luxury this unique fiber represents.

And for this, European manufacture is playing its key role in the global role out of the latest Bemberg™ innovations. Pioneering partner mills featured at the booth include: Euromaglia, Fiveol Textil, Infinity, Ipeker, Jackytex, Lanificio Europa, O’Jersey, SMI Tessuti, Tessitura Uboldi Luigi, TINTEX Textiles, Brunello, G.I. Tessil Foderami, Gianni Crespi Foderami, Manifattura Pezzetti, Marco Pastorelli and more. The new Bemberg™ booth at Premiere Vision is a contemporary and clean vision of the brand with a glowing, whitened atmosphere of modern architecture and luminous lighting that perfectly frames the new and dynamic identity image to reveal the ‘preciousness’ essence of the brand, its amazing textiles and leading fashion innovations.

Come and review the 3 fabric galleries, each showing the latest and unique fabric designs for Fashion Forward looks, refined Jersey Dressing and Luxury Athleisure Loungewear. Fashions by Maison Margiela confirm the new status of Bemberg™ as the ONE fiber that moves the luxury of Touch to a new contemporary fashion Feel: the ONE for a cool, liquid drape and movement: the ONE for fresh, exquisite comfort, and the ONE smart material born in the circular economy.

The Bemberg™ new campaign

We show a vision from the past in a true classic vintage sheath dress from the 1991 Martin Margiela winter collection using a peach skin finish on a refined, parachute-light fabric in a signature gunmetal grey colour courtesy of Zohra Alami. And also a contemporary representation of fashion from the MM6 MAISON MARGIELA SS2018 collection with a lingerie inspired dressy style in Bemberg™ popeline. This is a multifunctional style to be used as a top or as a dress

A new technical advance in finishing from Asahi Kasei is presented at the booth. Called Velutine Evo, the finish is comparable to premium peach skin finishes today, but now with a better environmental profile by using less water and energy to produce a durable and refined finish that sets a new benchmark for everyday luxury, demonstrating the company’s ongoing commitment to R&D in smarter, market relevant innovations. The results are supported by a preliminary study carried out by ICEA according to the methodology of Life Cycle Assessment (LCA) 3rd party testing from ICEA, on datas provided by TIFAS and focusing on environmental benefits that will accrue to partners efforts to offer value with values.

Moreover, you will be able to enjoy the circularity of the Bemberg™ story: its source, manufacture and end-of-life credentials, as well as checking the LCA study, also signed by ICEA and validated by Paolo Masoni, a step that confirms a new quality profile and standard for Bemberg™ with a more responsible and unique position today. Full GRS certification, Oeko-Tex 100, ISO 14001, & Eco-Mark.
Also Bemberg™ can add to its premium position on responsible issues, starting from its raw material choice that clearly demonstrates its circular economy approach. Bemberg™ is made from a cotton linter bio-utility waste, a natural derived and abundant source, and a truly unique one in the smart fiber arena that doesn’t deplete food or forestry resources.

Bemberg™ has new Compostability Certification. Innovhub-SSI report confirms Bemberg™ filaments disintegrate at 100% value within the limits specified by the UNI EN 13432, point A.3.1 for disintegration in the composting process. Also related is a new Ecotoxicity metric to EN 13432:2000 Annex E, the compost obtained from the Bemberg™ filaments according to ISO 16929:2013 revealed the absence of any ecotoxicity effect respect higher plants. The Bemberg™ filaments tested for the presence of heavy metals and other toxic hazardous substances comply with the requirements specified by the UNI EN 13432, for the substances listed in table A.1.

Asahi Kasei is proud to present the Bemberg™ heritage that delivers a true precious uniqueness through responsible smart innovation and transparency. To make contemporary luxury materials that provoke emotive responses through its rarity, sensuality, research and creativity. The ingrained knowledge and know-how behind the brand adds value to the supply chain, working only with the best, amplifying our partner’s knowledge and dynamic commitment too.

Built on an island right off the Finnish capital Helsinki, the Nolla cabin represents an ecological alternative to cabin life.

This summer, living with minimal emissions will be put to the test. Neste is building a prototype of a cabin that has a minimal environmental impact in terms of both carbon dioxide emissions and concrete impact on nature. The Nolla (= zero) cabin, designed by Finnish designer Robin Falck, is located just outside Helsinki city center, on the Vallisaari island. The cabin has been built from sustainable materials and is designed for a simple lifestyle with minimal to no emissions, taking into account the surrounding nature in every respect.

Located on the idyllic island of Vallisaari in the Helsinki archipelago, the Nolla cabin encourages people to consider how modern solutions and innovations could enable sustainable cabin living. Vallisaari has been in a natural state for decades and is thus the perfect location for an urban cabin experience, located at a 20-minute boat ride away from the Helsinki market square. The ecological and mobile Nolla cabin will be in Vallisaari until the end of September, demonstrating a lifestyle that generates minimal to no emissions.

Placing the compact and mobile cabin on its private lot does not require a construction permit
and it has been designed to use building materials as effectively as possible. The cabin is the size of a small bedroom and can be assembled and transported without heavy machinery, leaving its environment nearly untouched. The Nolla cabin has been designed by Finnish designer Robin Falck, whose earlier design, Nido cabin, has been globally acknowledged.

The Nolla cabin introduces solutions, which enable minimizing cabin life emissions remarkably. The energy supply of the cabin is entirely renewable; electricity is generated by solar panels, whilst the Wallas stove, reserved for cooking and heating, runs entirely on Neste MY Renewable Diesel, made 100% from waste and residue. The Aava Lines raft operating between Helsinki city centre and Vallisaari will also run on Neste MY Renewable diesel that can reduce greenhouse gas emissions by up to 90%.

“With the Nolla cabin, we want to offer visitors the possibility to experience modern cabin life in the realm of nature, with minimal emissions. An ecological lifestyle does not only require giving up unsustainable commodities, but also discovering modern, sustainable solutions that can be used instead. This has been an essential part of the design process”, says Falck.

“Finns are known for spending time at their beloved summer houses. We wanted to explore sustainable solutions that could enable cabin life with minimal emissions. Shared and circular economy, as well as new technologies and innovations have made it possible to enjoy our cabins without harming or burdening the environment. Some of the solutions that have been used at the Nolla cabin are perfectly adaptable at any cabin”, says Sirpa Tuomi, Marketing Director at Neste.

The Nolla cabin is executed in collaboration with Fortum, Wallas and Stockmann and is part of the Journey to Zero project by Neste, which explores new ideas and aims to steer the world towards a cleaner future with fewer emissions.

EUROBIKE, the world’s leading trade fair for the cycling industry, included ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers discovered ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ joined this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? was held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel led the way, as they shared their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
 Witness ROICA™ partners as leaders in high-tech performance fabrics for the world of sports for riders that want to stand out. The unbeatable collection of well-constructed fabrics that revolutionize the premium stretch market at the following EUROBIKE Exhibitors:

• M.I.T.I. SpA (IT)
• Maglificio Ripa (IT)
• Piave Maitex (IT)
• SITIP SpA (IT)
• SOFILETA (FR)
• Sportwear Argentona S.A. (ES)

Hexcel is exhibiting at the Toulouse Space Show on June 26-28 to promote its latest technologies and innovations in composites for space applications. More than 3,000 visitors are expected at this major international forum that is dedicated to novel solutions for space.

Hexcel’s promotions will feature a number of 3D-printed flight-ready carbon fiber parts manufactured from HexAM™ additive manufacturing technology, combining high performance PEKK thermoplastics with aerospace grade carbon fiber. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

Other Hexcel solutions for space applications include carbon fiber, prepregs and honeycomb materials with proven performance for satellite structures and launchers.

Hexcel Corporation is a leading advanced composites company. It develops, manufactures and markets lightweight, high-performance structural materials including carbon fibers, specialty reinforcements, prepregs and other fiber-reinforced matrix materials, honeycomb, adhesives, engineered core and composite structures for use in commercial aerospace, space and defense and industrial applications.