From the Sector

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

NOVARA also enables unique lifestyle product innovations at lower production cost for fashion, sportswear, technical clothing, and upholstery such as combining sustainable odour control, skin care additives, and fragrance finishing, without impacting breathability, hand feel or wicking. It is suitable for finishing all fabric types, from 50 - 1000 gsm, including polyester, cotton, nylon and polycotton.

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

• The FlexoCleanerBrush™, a solution to enhance print quality and improve worker safety in corrugated printing.
• The FlexoCleanPick™, a system designed to automatically remove hickeys—typically caused by paper fibers, dust and ink contamination, and other causes of printing defects—from the plate during the print run without stopping the press or requiring operator skin contact with wash agents.
• The FlexoDry2™, a fully integrated IR drying system, specifically developed for corrugated flexo printing presses, that reduces energy consumption by up to 30 percent over standard IR dryers via the use of patented Diamond IR™ lamps.
• A new generation of LED-UV technology—designed by AMS Spectral UV, a Baldwin Technology company, for wide-format flexo corrugated box printing—represents the latest in solid-state LED curing innovations and offers more than a 50 percent reduction in power consumption, compared to traditional UV systems, in an ultra-compact lamphead that fits at the end of the press or between printing units.

You can register here.

The textile industry is constantly searching for new, sustainable, and circular materials. Following thorough research and testing, Spinnova and KT Trading have developed a natural leather fabric made from leather waste without harmful chemicals.

"Leather is an amazing high-quality material with unique properties. With this new textile, we have taken yet another step towards completing the circular economy for leather," says Kristian Geert Jensen, CEO of KT Trading, who now has a joint venture with Spinnova.

Spinnova CEO: Sustainable innovation
Together with KT Trading, ECCO’s key leather provider, Spinnova has established the Respin company - a new joint venture. The partners are already constructing a leather fibre production pilot plant in Finland.

ECCO’s Applied Research division and Spinnova have been in a R&D collaboration since 2018 and have made successful trials with spinning the protein biomass into fibre. Processing leather raw material does not require further technology development from Spinnova. The company already has proof of concept from using the method on wood-based raw material.

RINCO ULTRASONICS is strengthening its market presence in Central America – a significant market for the automotive supply industry – by opening its own subsidiary in Mexico.

Romanshorn, May 2021 – With the establishment of its eleventh global subsidiary and its first in Central America, RINCO ULTRASONICS is highlighting the importance of the Central American market. “The automotive supply industry is one of the strongest sectors of industry in Mexico and one of the most important markets for RINCO. Our subsidiary in Querétaro, which is located 200 km away from Mexico City, will bring us closer to customers and partners alike,” explains Serge Patamia, CEO of RINCO ULTRASONICS. “We already enjoy high levels of confidence from both customers and partners in the region, and local presence will only serve to improve this. Investing in a dedicated subsidiary underlines our commitment to the market in Central America.”

José Armando Vázquez, the newly appointed country manager for Mexico, brings both passion and specialist expertise to his role. Having grown up in the automotive industry, Vazquez knows the needs and requirements of the supplying industry and the plastics sector inside out.

In José Armando Vázquez, customers and interested parties in Mexico have a local point of contact who is bringing Swiss perfection to Querétaro in the form of RINCO ULTRASONICS MEXICO. In addition to sales, RINCO in Mexico also offers technical services such as an application-based test laboratory and various service facilities to promote the building of partnerships and the delivery of new projects.
“Our aim is to captivate users with our ultrasonic technology and offer them tangible added value so that by using solutions like our AGM Pro ultrasonic generator, for example, they can save time and user fewer materials,”, says Serge Patamia, summarising what customers in Central America can expect.

Archroma, a global leader in specialty chemicals towards sustainable solutions, announced the release of its Sustainability Report for its fiscal year 2020.

Prepared again in accordance with the Global Reporting Initiative (GRI) standards, and building on a strong track record, the report outlines the company’s progress on its priority sustainability topics, such as human health and environmental safety, resource efficiency, sustainable sourcing and product stewardship, as well as diversity & inclusion, and talent management.

For the first time Archroma conducted a survey with its stakeholders to confirm the relevance of the sustainability topics covered in the report. These include biodiversity, occupational and product safety, and fair labor practices, as well as maybe less expected topics such as compliance, economic performance, and culture.

The report can be downloaded at: www.archroma.com/sustainability.

• ANDRITZ receives an additional order for a high-speed spunlace line from Zhejiang Kingsafe, China

International technology Group ANDRITZ has received an order from Zhejiang Kingsafe Hygiene Materials Technology Co., Ltd. in Hezhou, China, to supply a complete new neXline spunlace line. The line is scheduled for installation and start-up during the second quarter of 2022.

This high-capacity spunlace eXcelle line will process either 100% biodegradable fibers or blends of polyester and viscose. It is dedicated to the production of hygiene and medical fabrics. The final products will have fabric weights ranging from 30 to 100 gsm, and the annual production capacity will be up to 18,000 tons.

ANDRITZ will deliver a complete line, from web forming to drying, also integrating two high-speed TT cards, the well-known JetlaceEssentiel hydroentanglement unit and the neXdry through-air dryer equipped with a neXecodry S1 system for energy saving. This combination is becoming the market benchmark for the production of lightweight spunlace fabrics dedicated to the hygiene market.

“We are proud to operate ANDRITZ nonwoven lines, which are very reliable and efficient. It helps us a lot in producing top-of-the-range, nonwoven roll goods, thus enabling us to be recognized as a key player among nonwovens producers worldwide,” says Kingsafe’s president, Mr. Huarong Yan.

Zhejiang Kingsafe Hygiene Materials Technology Co., Ltd., founded in 1987, is one of the largest companies in China producing spunlace and spunbond nonwoven roll goods, with several spunlace lines already in operation. The final products are exported all over the world and used in many fields, such as the medical sector, health care, high-tech agriculture, and high-quality consumer and household products.

The new line is now the ninth spunlace line supplied by ANDRITZ and the third with high-speed TT cards, thus confirming the successful, long-term partnership between ANDRITZ and Zhejiang Kingsafe. The order also proves that the solution provided by ANDRITZ is recognized as the benchmark for production of premium spunlace roll goods and contains the perfect combination for wipes converting machines.

International technology Group ANDRITZ has received an order from Pratrivero s.p.a. to supply a new eXcelle batt forming line for their production facilities in Valdilana, Italy. The line will be dedicated to the production of Maliwatt products, used in furnishing, automotive, naval, medical, geotextiles, advertising, clothing, and packaging applications. Installation and start-up are scheduled for the third quarter of 2021.

The ANDRITZ batt forming line includes an eXcelle card and eXcelle crosslapper, a ProDyn™ web profiling correction system as well as a scanning gauge with a closed loop. The ProDyn system combines actions from the card doffers with dynamic speed variation at the crosslapper. This will result in substantial fiber savings and reduction in CV%, providing improved weight evenness in the final product. The ProDyn closed loop will ensure the best possible self-regulation for the equipment and thus enable Pratrivero to produce one of the best product qualities on the market. Pratrivero will be the world’s first company to use the ProDyn technology in the Maliwatt stitchbonding process.

Stitchbond is a nonwoven process made by mechanically interlocking fiber webs with continuous filaments, thus imitating textiles. Stitchbonded products are used in many applications due to their lower production costs compared to woven textiles. Among all the different nonwoven processes in which it operates, ANDRITZ is also a market-leading supplier of batt forming equipment for the stitchbonding processes producing Maliwatt, Malivlies and quilting.

Pratrivero is an important player in the production of nonwoven fabrics using stitchbonding technology.

• Order intake of around CHF 300 million received in the month of April 2021
• Order intake in the first half of 2021 expected to be around CHF 800 million
• Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

• Group sales in the first quarter 2021 of €241.5 million, down 2% below prior year (currency adjusted on prior year level)
• Expected positive impact from a contract termination with a customer of reporting segment Graphite Solutions contributes around €9 million to sales and earnings
• Transformation program proceeds according to plan in all areas
• EBITDA pre of €33.0 million significantly higher year-on-year (Q1/2020 €29.0 million), EBIT increases to €17.0 million (Q1/2020 €6.4 million)
• Positive net result at €6.1 million (Q1/2020 minus €4.3 million)
• Liquidity at €168.6 million also developed positively (year-end 2020 €141.8 million)
• Net financial debt decreases by 5% to €271.5 million (year-end 2020 €286.5 million)
• Equity ratio increases to 20.4% (Year-end 2020 17.5%)
• Outlook for fiscal year 2021 fully confirmed

See attached document for more information.

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan launched its first bio-based technology in 2019 and is fully committed to making bio-based versions of their existing textile finishes. ‘We have put ourselves on a mission to be able to extend our Bio-Based range further”, says Sven Ghyselinck, CEO of Devan. “We wanted to make an even bigger impact on circularity than before, therefore we looked into what fabric producers use a lot: softeners and moisture management systems. Only by focusing more on the large volume products, can we support the industry to have a bigger impact on sustainability. After the growing success of our natural antimicrobial BI-OME NTL, we are proud to now introduce our new natural Passerelle line”.

Passerelle Soft NTL is a durable softness technology based on vegetable ingredients. The technology is wash durable and can be used with natural fibres like hemp, cotton, but is also fit for synthetic fibres like rPES, PA. The bio content of the technology is above 85% (ASTM D6866-20).

Passerelle Quick-Dry NTL is a moisture management technology also based on vegetable ingredients. This bio-based finish enables high wicking and evaporation capability which helps to evaporate water/sweat easier and faster. The technology is also > 60% (28 days) biodegradable according to OECD 301B.