From the Sector

A broad coalition of industry organizations and labor unions, representing a broad spectrum of manufacturers and workers who stepped up to make essential personal protective equipment (PPE) throughout the COVID-19 pandemic, sent a letter to Senate Majority Leader Chuck Schumer (D-NY) and Senate Minority Leader Mitch McConnell (R-KY) expressing strong support for the inclusion of robust domestic procurement policies for PPE in the U.S. Innovation and Competition Act (USICA) currently being considered by the Senate.

See the coalition’s full letter here.

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

NOVARA also enables unique lifestyle product innovations at lower production cost for fashion, sportswear, technical clothing, and upholstery such as combining sustainable odour control, skin care additives, and fragrance finishing, without impacting breathability, hand feel or wicking. It is suitable for finishing all fabric types, from 50 - 1000 gsm, including polyester, cotton, nylon and polycotton.

Archroma announces a successful first year on the U.S. home care market with its whiteness solutions for laundry and detergents.

Archroma acquired in December 2019 the BASF's stilbene-based optical brightening agents (OBA) business for liquid and powder laundry detergent applications. The acquisition included the OBA technology, portfolio and manufacturing unit at Ankleshwar, India.

Since then, Archroma has mobilized its global experts, technologies and know-how, to design a holistic solutions portfolio for household, industrial & institutional cleaning (HI&I) aimed to support detergent manufacturers.

The portfolio now includes solutions for whiteness, coloration, stain removal, fabric softening, as well as sequestering agents and surfactants, which can be used in applications such as multipurpose cleaning powders, detergent powders, dish wash tablets and liquids, laundry liquids and fabric softeners, and hard surface cleaners.

Archroma used its experience working with manufacturers and brands in the textile industry to enter the US detergent markets for the very first time, and has been able to gain a significant position with most key laundry detergent manufacturers with its solutions for whiteness.

In particular, the company reports special interest from U.S. detergent brands and manufacturers for its Leucophor® 5BMGX, as this optical brightener allows them to achieve high levels of whiteness with a blueish undertone. The product is also highly soluble in water and stable in oxidative environment.

Paper Converting Machine Company (PCMC) —a division of Barry-Wehmiller and a global supplier of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries — presents its new Paragon rewinder during an online launch event.

Held June 8 at 9 a.m. (CT), the virtual reveal will include a machine overview, a demonstration of its patent-pending winding technology and a live Q&A session. In addition, attendees will learn how the Paragon’s design allows for robust caliper, bulk and diameter flexibility, and how its new HMI gives operators unparalleled machine control with intuitive navigation and fewer, simpler adjustments.

For more information click here.

RINCO ULTRASONICS is strengthening its market presence in Central America – a significant market for the automotive supply industry – by opening its own subsidiary in Mexico.

Romanshorn, May 2021 – With the establishment of its eleventh global subsidiary and its first in Central America, RINCO ULTRASONICS is highlighting the importance of the Central American market. “The automotive supply industry is one of the strongest sectors of industry in Mexico and one of the most important markets for RINCO. Our subsidiary in Querétaro, which is located 200 km away from Mexico City, will bring us closer to customers and partners alike,” explains Serge Patamia, CEO of RINCO ULTRASONICS. “We already enjoy high levels of confidence from both customers and partners in the region, and local presence will only serve to improve this. Investing in a dedicated subsidiary underlines our commitment to the market in Central America.”

José Armando Vázquez, the newly appointed country manager for Mexico, brings both passion and specialist expertise to his role. Having grown up in the automotive industry, Vazquez knows the needs and requirements of the supplying industry and the plastics sector inside out.

In José Armando Vázquez, customers and interested parties in Mexico have a local point of contact who is bringing Swiss perfection to Querétaro in the form of RINCO ULTRASONICS MEXICO. In addition to sales, RINCO in Mexico also offers technical services such as an application-based test laboratory and various service facilities to promote the building of partnerships and the delivery of new projects.
“Our aim is to captivate users with our ultrasonic technology and offer them tangible added value so that by using solutions like our AGM Pro ultrasonic generator, for example, they can save time and user fewer materials,”, says Serge Patamia, summarising what customers in Central America can expect.

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

For almost 10 years, unidirectional tapes (TPUD) have been manufactured from carbon fibers and thermoplastics in Heinsberg, Germany. The semi-finished products have so far been offered with PEEK or PAEK – and PPS is now added to the list of available matrixes. PPS allows a lower process temperature compared to PEEK or PAEK. For the industrial market in particular, increasing the production rate to make processes more cost-efficient is an opportunity.

International technology Group ANDRITZ has received an order from Pratrivero s.p.a. to supply a new eXcelle batt forming line for their production facilities in Valdilana, Italy. The line will be dedicated to the production of Maliwatt products, used in furnishing, automotive, naval, medical, geotextiles, advertising, clothing, and packaging applications. Installation and start-up are scheduled for the third quarter of 2021.

The ANDRITZ batt forming line includes an eXcelle card and eXcelle crosslapper, a ProDyn™ web profiling correction system as well as a scanning gauge with a closed loop. The ProDyn system combines actions from the card doffers with dynamic speed variation at the crosslapper. This will result in substantial fiber savings and reduction in CV%, providing improved weight evenness in the final product. The ProDyn closed loop will ensure the best possible self-regulation for the equipment and thus enable Pratrivero to produce one of the best product qualities on the market. Pratrivero will be the world’s first company to use the ProDyn technology in the Maliwatt stitchbonding process.

Stitchbond is a nonwoven process made by mechanically interlocking fiber webs with continuous filaments, thus imitating textiles. Stitchbonded products are used in many applications due to their lower production costs compared to woven textiles. Among all the different nonwoven processes in which it operates, ANDRITZ is also a market-leading supplier of batt forming equipment for the stitchbonding processes producing Maliwatt, Malivlies and quilting.

Pratrivero is an important player in the production of nonwoven fabrics using stitchbonding technology.

• Order intake of around CHF 300 million received in the month of April 2021
• Order intake in the first half of 2021 expected to be around CHF 800 million
• Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

U.S. Senators Rob Portman (R-OH) and Gary Peters (D-MI), Ranking Member and Chairman of the Senate Homeland Security and Governmental Affairs Committee, applauded the Senate Homeland Security and Governmental Affairs Committee for passing their bipartisan legislation that will strengthen efforts to onshore production of personal protective equipment (PPE) in the United States by requiring federal agencies to issue long-term contracts for American-made PPE. Reshoring production will ensure American workers, health care professionals, and more have the PPE they need as the economy continues to reopen. Domestic production of PPE supplies also will create American manufacturing jobs and ensure that America is better prepared for the next pandemic.

Innovation is an essential part of this industry – it's how we invest in our future. The top priorities for players in the composites value chain include product solidity, safety, and durability. The JEC Composites Innovation Awards are meant to inspire all participants, the whole industry and shed light on the excellent work carried out by the prize winners.

After pre-selecting the finalists, a selection process and a jury will select one winner in each category (Aerospace; Automotive & road transportation – exterior; Automotive & road transportation – structural; Building; Construction & Infrastructure, Design; Equipment & Machinery and Sustainability)

The awards ceremony will take place during JEC Composites Connect on Wednesday, June 2nd at 2:30 pm CEST.

More information here.