From the Sector

• 75% recycled content yarn with no performance compromise
• A circular, endlessly recyclable solution for contract, automotive and residential carpets
• Significant resource efficiency in EqoCycle production compared to virgin-based PA6 yarn: 58% reduction in fossil fuel use; 27% less energy consumption; 37% CO₂ emission reduction

B.I.G. Yarns announces its latest development, EqoCycle, a fully recyclable PA6 yarn with 75% recycled content, offering the same high-quality performance of virgin PA6 yarn. The new recycled yarn mainly based on post-industrial waste supports contract, automotive and residential carpet manufacturers with a drop-in circular solution to reduce the ecological footprint of their end products.

EqoCycle is made with recycled granulates derived from pre-consumer recycled and regenerated PA6, certified by Control Union for Global Recycled Standard (GRS) Certification. The use of less virgin materials implicates a decrease of fossil fuels by 58% and a 27% decrease in energy consumption. On top, EqoCycle yarns allow a reduction of 37% of CO₂ eq./kg compared to the fossil based yarns. The environmental impacts of EqoCycle with 75% recycled content were calculated through an LCA analysis, verified according to ISO 14025 and EN 15804+A1 and published in an Environmental Product Declaration (EPD registration number S-P-02415).

Customers have the assurance that for every 1.000 tons of EqoCycle yarn, 13,562 barrels of oil are saved and 2.700 tons of CO₂ emission are reduced, compared to PA6 traditionally made from virgin materials.

Emmanuel Colchen, General Manager Yarns Division, comments: “EqoCycle is a perfect example of how higher resource efficiency in our industry can promote greater circularity in our customers’ industries. Minimizing waste, re-using materials, and saving energy and carbon emissions in production, it provides our customers and carpet brands with a new sustainable alternative that won’t compromise their end-product performance but will support their increasing focus on CO₂ reduction and global warming potential. All part of our wider commitment to encourage decoupling from the need for only virgin feedstocks and moving towards a circular economy for yarns and soft flooring industries.”

EqoCycle is the latest circular solution in B.I.G. Yarns’ PA6 portfolio, joining EqoBalance PA6, based on biomass balance renewable resources, which offers up to 75% CO₂ reduction. Both exemplify the company’s on-going investment in developing new products that better serve customers’ needs in a sustainable way. B.I.G. Yarns fully pursues opportunities to support and solve the global environmental challenges through innovation, investment and collaboration, as part of its sincere belief in, and broader commitment to, Social Responsibility.

The innovation of EqoCycle and EqoBalance PA6 aligns with the company’s active integration of the UN Sustainable Development Goals (SDGs) into its business activities, creating value for customers and engaging employees and value chain partners.

Hexcel announces its latest HexPly® XF surface technology that reduces shell manufacturing time within the wind blade surface finishing process. HexPly XF increases overall blade manufacturing efficiency by reducing time in the mold by up to two hours and by banishing surface defects that require rework before painting.

Hexcel’s HexPly XF surface technology has been formulated to address the limitations of current blade shell surfacing techniques whereby pinholes and other surface defects have to be repaired by hand to achieve the perfectly smooth surface required for painting.

HexPly XF surface technology introduces a new material format as the surface finishing layer, eliminating the need for a traditional in-mold gel coating process. HexPly® XF for infused rotor blades, is a lightweight non-woven semi-preg construction, comprising an epoxy resin matrix, that co-cures with standard epoxy infusion systems. The product has a successful track record in prepreg blades and has now been adapted for infusion processes.

Easy to handle and supplied in a ready to use roll form, HexPly XF can be quickly applied by hand or with semi-automated layup equipment. It features one self-adhesive, surface finishing side - indicated by a removable protective foil. This side of the prepreg is placed against a release agent treated mold surface. Once the material has been positioned, the lay-up of the blade shell structure can start immediately, and the laminate can be infused. After curing, the blade is de-molded with the manufacturer benefitting from a pinhole-free surface that needs minimal preparation before painting.

HexPly XF material is less than half the weight of a typical gel coat per square meter, reducing the overall weight of the blade. Additionally, the consistent areal weight and thickness of the prepreg film provide a completely uniform surface coating, ensuring blade weight distribution and balance are maintained, which is critical as rotor diameters continue to increase. With no need to handle or mix liquid chemicals as in the gel coat process, HexPly® XF also improves the health and safety working conditions on the shop floor.

The material has a shelf life of six weeks at ambient temperature, which also minimizes cold storage requirements and helps to reduce scrap.

Intelligently designed clothes made with the latest manufacturing technology are the results of the partnership between on of the leading denim innovators ISKO and the Italian brand HIGH. A project, part of the SS2021 HIGH collection, is the start of collaboration in the pursuit of sustainable fashion.

Aimed at bringing a positive change both for the planet and its people, the project presents two pieces – jacket and pants – which embody HIGH’s approach to creativity and production: a wellbalanced mix of specialists’ expertise and a tireless investigation on the latest and most responsible fabric technologies. HIGH identified the R-TWO™ program as the right fabric ingredient, ideal to level up sustainability in its looks.

Relying on a blend of reused and recycled materials, this revolutionary platform works by embedding material circularity into the production process, designing waste out of the system and minimizing impact at scale. With fully traced reused cotton coming from ISKO’s production loss, which is prevented from becoming waste by adding it back into the spinning process, and an efficient use of polyester materials which are spun into newly recycled fibers, the program can provide certified to Textile Exchange environmental credentials. According to the percentage of material contained, these can be either the Content Claim Standard, Global Recycled Standard, Organic Content Standard or Recycled Claim Standard, ensuring better use of raw materials and resource efficiency while providing advanced concepts that don’t compromise on their look and performance.

Additionally, to meet HIGH’s performance needs, ISKO has brought to the table one of its most popular technologies, of course in its R-TWO™ version: Jeggings™, super-stretch denim technology. Soft and lightweight as leggings, it provides comfort with the look of authentic denim and provides the perfect, responsible solution to usher the partnership.

From 25 – 27 August, 2021, Intertextile Shanghai Home Textiles – Autumn Edition will join forces with Intertextile Shanghai Apparel Fabrics – Autumn Edition, Yarn Expo Autumn, PH Value and CHIC to showcase the latest products and services within the entire textile sector. Collectively, the fairs are set to offer valuable synergistic effects for the home décor, apparel, yarn and fibre industries.

Despite the disruption caused by the pandemic, the Autumn Edition of Intertextile Shanghai Home Textiles 2020 was able to go ahead as scheduled to support the industry’s recovery. The three-day show welcomed a total of 26,673 trade buyers from 43 countries & regions, as well as 643 exhibitors from 11 countries & regions. What’s more, the show’s virtual events drew 558,179 attendees from across the world.

“We are delighted that Intertextile 2020 was able to run as planned and received positive feedback from participants. It is a confirmation of our leading position in the Asian industry, and our unwavering commitment to providing the best trade platform for our exhibitors and visitors that reflects market demands,” said Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd. “As we continue to navigate through these challenging times, we look forward to developing more creative and flexible solutions to adapt to the ever-changing business environment. The 2021 edition will continue with the hybrid format that combines both physical and virtual events, in order to facilitate contacts between suppliers and buyers worldwide, and open up new opportunities in the post-pandemic era.”
 
“Additionally, we decided to hold Intertextile Shanghai Home Textiles concurrently with Intertextile Shanghai Apparel Fabrics and Yarn Expo next year. Holding these three events at the same time and place will generate exciting synergistic effects, as well as provide a comprehensive sourcing platform for participants. And, of course, the show will present a series of high-quality fringe events for fairgoers to gain the latest market trends and insights,” Ms Wen added.

Discover a new season of inspiration at Intertextile
At the upcoming fair, exhibitors will fill four halls at the National Exhibition and Convention Center (Shanghai), occupying an area of 100,000 sqm. To offer a more efficient and convenient sourcing experience for buyers, the fair will once again feature an array of product zones and country & region pavilions including:

• Country & region pavilions: presented by Belgium, India, Pakistan, Taiwan and Turkey.
• Carpet zone: featuring renowned domestic and international providers of carpets and floor coverings.
• Editor zone: offering high-quality upholstery fabrics from prominent European manufacturers.
• Finished product zone: international suppliers will showcase their latest finished goods for a variety of applications.
• Textile design zone: leading design studios will exhibit their creative ideas and products for all areas of the interior markets.
• Textile technology zone: presenting cutting-edge textile technologies which can achieve flexibility, efficiency and sustainability.
• Contract business: leading suppliers will offer a vast portfolio of functional fabrics catering to different interior settings such as hotels, restaurants and public spaces.

• The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

During the audit preceding the certification, the independent environmental auditor thoroughly investigated all departments of the company, from the production itself to the company canteen. He found no non-conformances and was impressed by the competence and the high sense of responsibility among Kelheim’s employees. In contrast to the EU Ecolabel and similar certifications, EMAS does not apply to individual products or services, but certifies the complete environmental performance of the company. This benefits not only the protection of the environment and climate, but also the improvement of a company’s ecoefficiency.

Craig Barker: “An efficient environmental management system ensures that economy and ecology go hand in hand – that gives us a decisive competitive edge.”

• Elleti Group partners with Wiser Wash for Europe and the Mediterranean area, with Portugal being the only exception, for a more sustainable fashion.
• The enterprise based in Verona joins Wiser Wash’s international network and adopts the innovative patented process for the treatment of denim that has the market’s lowest environmental impact.

Tradition and innovation: this combination has always characterized Elleti Group, a historic company based in San Bonifacio and an important point of reference for the denim industry and beyond. Now it is also the exclusive partner of Wiser Wash for Europe and the Mediterranean area, with Portugal being the only exception. Specializing in laundry, dyeing and garment making services, the company is led by the steady hand and ambitious vision of Luigi Lovato, who was recently recognized by Rivet50 as one of 2020's fifty most influential people in the denim ecosystem. The partnership with Wiser Wash is a fitting continuation of Elleti Group's tireless pursuit of excellence, development of cutting-edge solutions and commitment to environmental sustainability, which has always projected the proud Made in Italy tradition towards the future.

With the introduction of Wiser Wash's technology, Elleti Group has significantly reduced the amount of resources used in traditional garment treatment. This patented washing method eliminates the use of pumice stone and all harmful chemicals, while drastically reducing water consumption throughout the process. In addition, the efficiency of the process lowers chemical and mechanical stress on fabric fibers as compared to traditional treatment, guaranteeing greater garment robustness and longevity.

This important milestone is the latest and more relevant result of a commitment that has been integral to Elleti Group's approach since its foundation. This was already present in the Earthkeepers collection – a line of low environmental impact treatments which marked the culmination of research and experimentation journey, aimed at developing an authentic look whilst looking out for the safeguard of the environment, its resources and its people. Record of the company's evolution is kept in the "Stadium", an impressive archive of Elleti Group collections. There displayed are some 15,000 garments, direct evidence of the stylistic and technological developments that have made Elleti Group an international benchmark for creativity and high quality.

"Nothing is more important to us than satisfying our clients' needs. We put all our expertise and experience at the service of their creative ideas," said Luigi Lovato, Founder and CEO of Elleti Group. "The partnership with Wiser Wash is definitely another reason to be proud, and it will set our bar even higher in guaranteeing quality, authenticity and an ever-increasing respect for the environment and our employees."

• Miles Johnson and ISKO’s Creative Room present the new responsible collection.

The second edition of this partnership tells the story of a unique combination of creativity and expertise brought to the table by ISKO’s style and design center, Creative Room Italy, and the innovative designer Miles Johnson, resulting in a collection featuring responsible R-TWO™ fabrics and a selection of sustainable accessories and details.

An act of care for the planet and its people, Light on the Land 2.0 is the new capsule designed by Miles Johnson and ISKO. Former Design Director at Levi Strauss & Co. and Senior Creative Director of Product Design and Development at Patagonia, Inc., Miles joined forces with Creative Room and Iskoteca, ISKO’s Italian style and washing research hubs, to develop a collection that brings responsibility in the fashion industry to the next level.

The project includes 32 unique pieces, each of them realized with seasonless designs and sustainably-minded details. All the fabrics used in the collection were carefully selected from ISKO’s R-TWO™ platform. Using a mixture of reused cotton and recycled fibers, the technique embeds material circularity into the production processes, designing waste out of the system and minimizing impact at scale. Certified to Textile Exchange environmental credentials according to the percentage of materials contained, R-TWO™ ensures better use of raw materials and resource efficiency. ISKO’s Environmental Product Declarations (EPD®s), available for all its +25,000 products, offer a unique opportunity to measure the impact of R-TWO™’s savings in the Lifecycle Assessments (LCAs) framework, where resource savings can be seen in carbon impact, water-use reductions and many other impact KPIs.

Light on the Land 2.0 incorporates responsible design principles such as Cadica’s new and innovative trims, made of vegan apple “leather”, and has been developed using ecoconscious finishing techniques. The collection also features many additional sustainable facets such as efficient low-waste pattern cutting and design, efficient sewing methods, removeable rivets for end-of-life and biodegradable thread which can be removed at high heats.

“When we first started working on this project, we knew it was going to be amazing,” explained Massimo Munari, Manager and Art director Creative Room, ISKO. “To design a collection like this, you need to begin with the right mindset and of course, the right materials. R-TWO was the perfect ingredient, thanks to the re-used and re-cycled content. We then aimed to minimize impact at all stages: incorporating sustainable design ideas, washing processes and trims. We are proud to have created such an inspiring, and sustainable collection, and to bring our collective vision to light.”

Due to the unprecedented challenges of this time, the collection was entirely developed through remote working and creative solutions to ensure the safety and health of all parties involved. To this end, everyone was kept safe thanks to ISKO Vital™+ reusable and eco-friendly face covers, created with organic cotton to cater for comfort and sustainability.

The company, founded in 1993, has established a reputation for leadership in new printing techniques and technologies with customers across Europe, as well as with many of the leading Turkish brands.

Mission
On its mission to achieving continuous progress in error-free and resource-efficient manufacturing, İlay has just taken delivery of a new Monforts Montex stenter range, with a working width of two metres and eight TwinAir chambers.

“This installation provides us with much improved control options for all process parameters and compared to the old stenter it is replacing, we are particularly impressed with the energy savings we are making,” Mr Savaş says.

Achieving energy savings on Montex stenters has been a key focus for Monforts designers and engineers in Germany for many years.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying.

The resulting constant evaporation rate within the stenter ensures optimum energy utilisation. In addition, TwinAir chambers feature special panelling for low heat radiation, careful sealing of all connecting positions and chamber access points, and air locks at both the entry and the exit.

“Monforts stenters set the benchmark in terms of energy efficiency and help conserve resources,” says Ahmet Kılıç, founder of Neotek, the representative for Monforts in Turkey. “Automatically setting the initial moisture content requirement for a specific process before drying to a minimum value helps reduce heat evaporation and consequently, energy consumption. The hermetic sealing of the stenter frame further prevents the loss of heated air as well as the ingress of excessive cold air – which has to be heated back up if it is not kept out in the first place.”

The new Montex line was completed at İlay Textile in August 2020, with no problems during either installation or commissioning.

• Carbon fibers combined with injection molding replace conventional steel construction
• SGL Carbon supplies innovative carbon fiber profiles
• Serial use in a future high-volume model of BMW Group
• Construction method offers great potential for use in other automotive projects

Already in August, SGL Carbon received a multi-year order from Koller Kunststofftechnik GmbH for the production of novel carbon fiber profiles for serial use in windshields for a future high-volume model of BMW Group.

The profiles are particularly flexible fiber tows, pre-impregnated with thermoplastic resin in various dimensions. They will be compiled by SGL Carbon on the basis of its own 50k carbon fiber at its site in Innkreis, Austria, and subsequently processed by the injection molding experts at Koller to form a skeletal plastic component. The composite component will replace the previous steel-based windshield. Production of the carbon fiber profiles will start in the remainder of 2020 and will then be ramped up gradually over the next few years for the BMW Group model launch.

In the vehicle, the windshield is a connecting element between the roof frames and thus has an important stabilizing function. The carbon fiber profiles add the required stiffness and crash safety to the component. At the same time, they help to significantly reduce the weight of the roof and thus also support the driving dynamics. The injection molding process also enables particularly complex and material-efficient structures. In the BMW Group model, this innovative component concept will cut weight by 40 percent compared to conventional steel designs of the component while creating important space for cable ducts and sensors.

The production of the carbon fiber profiles themselves is also particularly geared to material and process efficiency in large-scale production. The profiles consist of several smaller fiber strands, the so-called rods, and are manufactured using the modern continuous pultrusion process. During product and process development it was one key objective to ensure that material loss during production is almost completely avoided.

"At SGL Carbon, we have been working on the development of thermoplastic carbon fiber profiles for use in injection molding for some time already. This development work is now beginning to pay off. Due to the many advantages and competitive costs, we see a great potential for the technology to be used in other automotive projects too," explains Sebastian Grasser, Head of the Automotive Segment in the Business Unit Composites - Fibers & Materials at SGL Carbon.

"Innovative lightweight construction with hybrid designs has developed into a strategically conclusive concept for Koller Group's OEM customers," confirms Max Koller, CEO of Koller Group. "SGL Carbon's high level of material expertise, combined with the process know-how of KOLLER Kunststofftechnik and KOLLER Formenbau, create the basis for a promising future in innovative lightweight construction technologies. With this order, the BMW Group has confirmed its confidence in the successful cooperation between SGL and Koller; we are particularly pleased about this", said Max Koller.
 
The Koller Group is a globally operating technology company with plants in Europe and China, as well as NAFTA. The Koller Group develops and manufactures lightweight construction, tools and serial components, primarily for the automotive industry.

Kornit Digital announced Vizela, Portugal-based Calvi has implemented the Kornit Avalanche HD6 system for efficient, retail-quality digital decoration on demand.

Founded in 1977, Calvi is a textile manufacturing company that works with national and international partners to deliver sportswear and casual apparel for men, women, and children. Now occupying a 6,600-square-meter facility and employing a team of more than 120 qualified professionals, they are committed to the evolution of textiles with regard to three fundamental values: quality, availability, and efficiency. In addition to their own e-commerce operation, Calvi produces about 100,000 t-shirts per week for brands like Pull & Bear, Zara, and Bershka.

“When we first contacted Kornit, it was very easy to create the partnership we have now,” says Anselmo Pereira, Head of Design at Calvi. “Kornit Avalanche really helped us to move faster, to be more ecological—we basically don’t have minimum quantities to produce.

“This company started with my grandfather, and then my father started running the business by himself,” says Catarina Lopes, Founder and CEO of the brand’s eco-conscious NÜWA division. “I started NÜWA, which has two pillars: Everything is sustainable, and we are inspired by people. We are sustainable; we don’t have to create more water waste or use more resources. Our products are made from recycled cotton, recycled polyester, and organic cotton. We only use digital printing because it’s water inks; we don’t have to use chemicals in our products.”