From the Sector

Reset
12 results
Dibella's initiative to reduce carbon dioxide emissions (c) Heppner
16.07.2021

Dibella's initiative to reduce carbon dioxide emissions

Dibella's long-standing forwarding partner Hamacher was taken over by the sustainably committed logistics specialist Heppner at the end of 2018. The new constellation takes Dibella another step further in terms of climate-neutral transport: the logistics company, which originates from France, focuses on the environmentally friendly transport of goods and is investing heavily in a carbon dioxide-neutral vehicle fleet.

Dibella's long-standing forwarding partner Hamacher was taken over by the sustainably committed logistics specialist Heppner at the end of 2018. The new constellation takes Dibella another step further in terms of climate-neutral transport: the logistics company, which originates from France, focuses on the environmentally friendly transport of goods and is investing heavily in a carbon dioxide-neutral vehicle fleet.

"With our first sustainability report, we introduced the monitoring of our carbon dioxide emissions. It turned out that the transport of our textiles produces the most climate gases. We have therefore consistently switched to sea freight and almost without exception do not ship goods by air. However, we still see a need for optimisation from the port of Rotterdam to the customer or to our warehouse. After the takeover of our long-standing forwarding partner Hamacher by the logistics specialist Heppner, there is now a breath of fresh air in our climate-friendly delivery initiative. The company is committed to environmentally friendly transports and a low-emission vehicle fleet. Together we now want to look for solutions to make the "last miles" of our deliveries climate gas neutral," says Ralf Hellmann, Managing Director of Dibella.

Departure into a clean future
Spedition Heppner, with its origins in Alsace, is a family-owned company with worldwide operations and 3,320 employees handling more than 72 million freight items annually. More than a decade ago, the logistics specialist began recording the carbon dioxide emissions released by its fleet of vehicles and steadily reducing them by switching to environmentally friendly energy sources. With a mix of gas, bio-fuel and electric drive, the discharge of greenhouse gases caused by the company's trucks is to be reduced by twenty percent by the year 2025. By 2050, the entire fleet should be diesel-free. To achieve a carbon dioxide-neutral footprint, Heppner is also testing hybrid forms of transport (rail, inland waterways, truck) as well as alternative delivery options (cargo bike).

Source:

Dibella GmbH

AMAC kooperiert mit ITA (Institut für Textiltechnik der RWTH Aachen und deren ITA GmbH) für die weitere Geschäftsentwicklung im Bereich Composites  © AMAC
fltr: Markus Beckmann, Prof. Thomas Gries, Dr. Michael Effing, Dr. Christoph Greb
19.04.2021

AMAC cooperates with ITA

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates (c) MaruHachi
16.02.2021

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

Source:

AMAC GmbH

23.11.2020

AMAC cooperates with start-up FibreCoat

Cooperation and business development with AMAC
As of November 1st, 2020, AMAC is pleased to announce its cooperation with company FibreCoat for the market introduction of their products and global business development. FibreCoat is a young, award-winning start-up and spin-off of the RWTH Aachen University in Germany and develops multi-filament coated yarns, fabrics and composites based on glass or basalt fibres.

Dr. Michael Effing, CEO AMAC GmbH: „FibreCoat is a very promising newcomer in the electro-magnetic shielding and composites industry and their innovations are very cost-efficient for new technologies such as e-mobility or telecommunications. I am very pleased to introduce them to relevant key players in the industry and accompany them in their growth strategy.“

Product Launch
FibreCoat develops metal-coated fibres like bi-component multi-filament yarns with basalt core and aluminum coating which can be used for EMI-shielding and heat sinks in battery casings, electric diverters in filters, reinforcement of cast aluminum parts o ras conductive yarns in smart textiles.

Cooperation and business development with AMAC
As of November 1st, 2020, AMAC is pleased to announce its cooperation with company FibreCoat for the market introduction of their products and global business development. FibreCoat is a young, award-winning start-up and spin-off of the RWTH Aachen University in Germany and develops multi-filament coated yarns, fabrics and composites based on glass or basalt fibres.

Dr. Michael Effing, CEO AMAC GmbH: „FibreCoat is a very promising newcomer in the electro-magnetic shielding and composites industry and their innovations are very cost-efficient for new technologies such as e-mobility or telecommunications. I am very pleased to introduce them to relevant key players in the industry and accompany them in their growth strategy.“

Product Launch
FibreCoat develops metal-coated fibres like bi-component multi-filament yarns with basalt core and aluminum coating which can be used for EMI-shielding and heat sinks in battery casings, electric diverters in filters, reinforcement of cast aluminum parts o ras conductive yarns in smart textiles.

FibreCoat launches ALUCOAT™, an aluminum-coated glass or basalt fibre which is suitable as electro-magnetic shielding material in automotive applications such as radar, antennas or for autonomous driving as well as for mobile phones and applications in buildings. Due to its extraordinary thermal conductivity and better heat transfer compared to traditional composite material, it can be used for the manufacturing of automotive battery trays or industrial applications such as fine particulate air filters.

ALUCOAT™ is available as of January 1st 2021 as a yarn, fabric or non-woven with a wide range of possible titers and areal weight. The material will offer an electrical conductivity of 100 Ωm and a working temperature of at least 400 °C. Furthermore, it can be used for the shielding of low to high frequencies with an effectiveness of 80 to 120 dB.

Source:

AMAC GmbH

Kooperation AMAC und FINNESTER (c) Finnester
Finnester’s innovative fire protection coatings in action
21.09.2020

Cooperation AMAC and FINNESTER

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Ari Hokkanen, CEO of Finnester: “Finnester has developed unique high-quality coatings. The cooperation with AMAC will accelerate our growth ambitions and supports us in finding new business opportunities. We are happy to benefit from AMAC and Dr. Effing’s long-term experience as a pioneer in the composites industry and his high-quality network along the entire value chain.” Dr. Effing, CEO of AMAC GmbH confirms: “Fire-retardant coatings are very important to the composites industry in order to be successful especially in rail, fast ferry and building & infrastructure applications with their tough fire standards. The DACH region represents more than 30 % of the European market and is the key target for Finnester. I am looking forward to supporting Finnester with their unique offerings and connecting them with key players in the D-A-CH region.”

More information:
Finnester Coatings Oy AMAC
Source:

AMAC GmbH

Reach Group: Composites China Trade Show (c) REACH Group
10.09.2020

AMAC/Germany and REACH Group/China: first life business activity since Covid-19 at the Composites China Trade Show in Shanghai

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

Daniel He describes the situation: „The Chinese market is picking up again; a price increase of 7% for glass fibers was announced right before the China Composites Show, on August 25th 2020, which was even leading to a temporary material shortage. Today, the most booming industries in China are wind energy, building and infrastructure and innovation for electric cars. Unlike the rest of the world, where the aircraft industry undergoes a deep decline, in China it takes up by 50 %, which is very promising. Furthermore, we expect half a year for a full recovery of the industry, while the China growth of 2020 is still expected to be between 2 and 4 %.“

Michael Effing replied: “Enabling the composites business between China and Europe is the aim of our cooperation with Reach and with our customers, which are active in digital automatization, testing equipment or cost optimization software. We are very happy to have been present in China through our representant Reach and are looking forward to bridge and overcome the Covid-19-crisis with our upcoming event in Germany, the Composites for Europe in Stuttgart in November and hope to be back to full global business speed at the JEC in Paris in 2021.“

Source:

AMAC GmbH

Reach Group: Composites-Messe (c) REACH Group
10.09.2020

AMAC/Deutschland und REACH-Gruppe/China: erste geschäftliche Aktivität auf der Composites China Trade Show in Shanghai seit der Covid-19-Krise

Als erste Composites-Messe weltweit seit Beginn der Corona-Krise hat die China Composites in Shanghai (2. bis 4. September 2020) ihre Tätigkeit wieder aufgenommen. Die Messe verzeichnete ca. 600 Aussteller und über 20 000, größtenteils chinesische Besucher.

Unter der Leitung ihres Präsidenten Daniel He stellte die chinesische Reach Group vor Ort einige europäische Unternehmen und deren jüngste Entwicklungen aus der Kooperation mit Dr. Michael Effing´s AMAC vor, darunter Airborne (NL), Textechno (D) und Conbility (D).

Als erste Composites-Messe weltweit seit Beginn der Corona-Krise hat die China Composites in Shanghai (2. bis 4. September 2020) ihre Tätigkeit wieder aufgenommen. Die Messe verzeichnete ca. 600 Aussteller und über 20 000, größtenteils chinesische Besucher.

Unter der Leitung ihres Präsidenten Daniel He stellte die chinesische Reach Group vor Ort einige europäische Unternehmen und deren jüngste Entwicklungen aus der Kooperation mit Dr. Michael Effing´s AMAC vor, darunter Airborne (NL), Textechno (D) und Conbility (D).

Daniel He zur aktuellen Lage: "Der chinesische Markt zieht wieder an; am 25. August 2020, unmittelbar vor der China Composites Show, wurde eine Preiserhöhung von 7% für Glasfasern angekündigt, die eine vorübergehende Materialknappheit ausgelöst hat. Derzeit wachsen in China vor allem die Märkte Windenergie, Bauwesen und Infrastruktur sowie Innovationen für Elektroautos. Im Gegensatz zum Rest der Welt, wo die Flugzeugindustrie besonders unter der Krise leidet und einen starken Rückgang erfährt, wächst sie in China aktuell um etwa 50 % mit der Einführung der neuen chinesischen Flugzeugtypen C919 und CR 929, was wirklich sehr vielversprechend ist. Das Wirtschaftswachstum in China dürfte für 2020 trotz allem etwa zwischen 2 und 4 % liegen. Darüber hinaus erwarten wir im Laufe des nächsten halben Jahres eine vollständige Erholung der Composites Branche.“

Michael Effing erklärt: "Das Composites-Geschäft zwischen China und Europa weiter auszubauen ist das Ziel unserer Zusammenarbeit mit Reach und mit unseren Kunden, die in den Bereichen digitale Automatisierung, Spezialmaschinen sowie Prüfgeräte oder Software zur Kostenoptimierung tätig sind. Wir sind sehr froh, durch unseren Vertreter Reach in China präsent gewesen sein zu können. Wir freuen uns darauf, die Corona-Krise mit unserer bevorstehenden Veranstaltung Composites for Europe in Stuttgart am vom 10. bis 12. November zu überbrücken und hoffen, 2021 auf der JEC in Paris wieder in vollem globalen Geschäft zurück zu sein“.

More information:
Corona Messe Composites AMAC REACH
Source:

AMAC GmbH

18.05.2020

AMAC cooperates with Alpha Executive Advisory

In these difficult times of the worldwide COVID-19 crisis, flexible reactions and fast decisions can be of imminent importance, particularly in the fragmented composite industry with its back-bone of small and medium-sized enterprises (SMEs).

In response, the Industrial and Business Consulting company AMAC under the lead of Dr. Michael Effing has signed today a cooperation agreement with Alpha Executive Advisory to jointly offer advisory services in Business Coaching, Acquisitions & Divestitures as well as Business Transformation and Crisis Management, also ad interim.

In detail, this cooperation is to identify the right fit in terms of capabilities and financial strength for companies looking for expansion or divestiture, to deliver support to innovative young start-up firms in order to faster penetrate the market and to smoothen the transition to the next owner in interim management or to make the next appropriate strategic step.

In these difficult times of the worldwide COVID-19 crisis, flexible reactions and fast decisions can be of imminent importance, particularly in the fragmented composite industry with its back-bone of small and medium-sized enterprises (SMEs).

In response, the Industrial and Business Consulting company AMAC under the lead of Dr. Michael Effing has signed today a cooperation agreement with Alpha Executive Advisory to jointly offer advisory services in Business Coaching, Acquisitions & Divestitures as well as Business Transformation and Crisis Management, also ad interim.

In detail, this cooperation is to identify the right fit in terms of capabilities and financial strength for companies looking for expansion or divestiture, to deliver support to innovative young start-up firms in order to faster penetrate the market and to smoothen the transition to the next owner in interim management or to make the next appropriate strategic step.

More information:
AMAC
Source:

AMAC GmbH

Start of 3-years Interreg cross-border project AACOMA  is kicked-off (c) AMAC GmbH
AMAC-Standortkarte
13.05.2020

Start of 3-years Interreg cross-border project AACOMA is kicked-off

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

The Euregio Meuse-Rhine is a potential hot-spot for the further development of advanced material and process technologies. Technical Centers and Institutes around Aachen/Germany, Liège/Belgium and Eindhoven/The Netherlands were awarded with this new project AACOMA.

Innovative material design and advanced manufacturing provide large opportunities for SMEs. The AACOMA project kick-off took place in Aachen at the Campus of the RWTH University of technology in 1 Q 2020. The aim of the project, which is running for 3 years until 2023 with a budget of €3 Mio, is to connect SMEs with innovation hot-spots like institutes and technical centers.
Seven partners from all three regions will carry the project out: Centexbel is the project leader and gets support by University of Liège, Sirris and Flanders Make from Belgium, as well as Fontys University of Applied Science and AMIBM of Maastricht University in the Netherlands and AMAC in Germany.

Statements

Bernard Paquet, Project Coordinator from Centexbel/ Belgium stated:
“Centexbel, with a strong experience in textile and composites, will identify with its Interreg partners and an advisory board of international experts several demonstrators which will enable an accelerated advanced manufacturing of composite parts. This could include new materials and intermediates, high performance additives, bio-based products and new composites by additive manufacturing”.

Michael Effing, Managing Director of AMAC/ Germany said:
“The major goal of the project is to connect around 200 innovative SMEs with each other and establish the links to the world-class institutes in the EMR region. We will facilitate 6 roadshow events, addressing key topics like automated manufacturing, additive manufacturing or bio-based material systems combined with match making and training events. The first roadshow will be held on September 24, 2020 at the Aachen Campus of the RWTH University of Technology.”

Prof. Gunnar Seide from the AMIBM/The Netherlands continued:  
“Our AMIBM offers already an international master program on bio-based materials. The AACOMA project will be an important element for transborder research and will identify new players in the value chain coming from the EMR region. Innovative companies find markets for their new bio-based building blocks, chemicals and polymers. Their success stories and upcoming technological breakthroughs are needed for a sustainable future.”

 

Logo AMAC
AMAC und REACH agree on cooperation
20.04.2020

Strategic Cooperation between REACH and AMAC

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Source:

AMAC

Airborne / AMAC GmbH (c) AMAC GmbH
28.10.2019

Airborne strengthens its activities in the D-A-CH region with AMAC

As of October 1st, 2019, the Netherlands-based global market leading manufacturer of advanced automation equipment and solutions for composites, Airborne, strengthens its activities particularly in German speaking countries, the so-called D-A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC. The Dutch company is looking for specialised partnerships to develop and deepen its international business opportunities in the aerospace and automotive markets.

As of October 1st, 2019, the Netherlands-based global market leading manufacturer of advanced automation equipment and solutions for composites, Airborne, strengthens its activities particularly in German speaking countries, the so-called D-A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC. The Dutch company is looking for specialised partnerships to develop and deepen its international business opportunities in the aerospace and automotive markets.

Airborne’s focus is on high-end composite components, at high production rates at radically low conversion costs. Airborne is building up a suite of automated solutions for the manufacturing of composites with the aim to radically reduce costs and touch labour, minimize the footprint and use of material, and improve the time to market for their clients. The company offers i.a. solutions in automated honeycomb potting, automated kitting and automated lamination of thermosets and thermoplastics. In order to develop new business opportunities in the D-A-CH region for the end-markets aerospace and automotive, Airborne is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Dr. Effing, CEO of AMAC GmbH confirms: "As a first step for the establishment of Airborne on the German market, we just signed their membership at AZL in Aachen which will help to connect with over 80 companies and latest research developments. In the framework of theirstrategy to strengthen the supply to the aircraft sector, Airborne will also exhibit at the Aircraft Interiors Expo in Hamburg from March 31st to April 2nd 2020.”

 

Michael Effing (c) Textechno
Michael Effing
18.02.2019

Michelman counts on Textechno´s FIMATEST

Michelman, a global developer and manufacturer of environmentally friendly advanced materials, including sizing for glass and carbon fiber, has invested in the FIMATEST adhesion measurement system to ensure their sizing solutions continue to contribute to enhanced performance of composite parts.

Michelman, a global developer and manufacturer of environmentally friendly advanced materials, including sizing for glass and carbon fiber, has invested in the FIMATEST adhesion measurement system to ensure their sizing solutions continue to contribute to enhanced performance of composite parts.

“As we continue our vision to be the interface expert, it is critical to have analytical equipment that can efficiently fine-tune our sizing to optimize adhesion properties. This is one of the key performance attributes we provide our customers, and the fact that the Textechno FIMATEST system works according to the fiber pull-out principle makes it extremely valuable”, explains Steve Bassetti, Michelman’s Global Marketing Director for Industrial Manufacturing. “We have utilized this equipment in our development lab for almost two years, and it is suited for any fiber-matrix combination we have developed. It has been helpful that Textechno developed these instruments because they are, and will continue to be, a great benefit to the entire Composites industry. We look forward to supporting Textechno in establishing more standardization for the Industry regarding fiber-matrix-adhesion and processing properties.“

Dr. Ulrich Mörschel, CEO of Textechno, added: “We are proud that Michelman, the industry’s leading interface expert, invested in our testing system.” Bassetti further elaborated on the system’s benefits: “For Michelman’s customers, this equipment has allowed for great collaboration, increased screening of sizing concepts, and a more robust and efficient product development process.”

 

 

More information:
Michelman
Source:

AMAC Communications