From the Sector

• zwissTEX adds zwissCLEAN MASK BASIC to the zwissCLEAN® antiviral and antibacterial range

zwissTEX is adding a BASIC mask to the zwissCLEAN® range which is particularly suitable when a mask is to be worn over a longer period of time - whether for school, concerts, trade fair visits or air travel. "The special feature of our zwissCLEAN MASK BASIC is that it can be worn for up to 12 hours without any problems due to the breathable material", says Maximilian Schönfließ - Business Development Manager of zwissTEX. "With it even sleeping is possible. And unlike disposable masks it can be washed up to 10 times at 30 degrees. Disposal by type is also possible".

With zwissCLEAN® masks, zwissTEX is a pioneer among manufacturers of antiviral and antibacterial oronasal masks. Unlike conventional models they actively and highly effectively eliminate viruses and bacteria thanks to the latest textile technologies. This is made possible by an environmentally friendly finishing that foregoes the use of silver and zinc. "The formula physically interrupts the cell membrane of the viruses and bacteria - so no development of resistance is possible. In this way 99.9 percent of viruses and bacteria are eliminated within a very short time," says Schönfließ.

The zwissCLEAN MASK COMFORT is recommended for daily protection at shopping, on public transport, at business appointments or similar events. It consists of a three-layer structure and combines efficient antiviral protection with long-term wearing comfort. The outer material and the integrated fleece promote protection against viruses and bacteria. The lower material made of organic cotton guarantees a lasting pleasant feeling on the skin. The mask can be washed up to 30 times, thus replacing up to 210 disposable masks and saving resources sustainably.

The zwissCLEAN® range is being continuously expanded. "In addition to mask production we plan to manufacture antiviral and antibacterial gloves," says Schönfließ. "The test phase is already underway and we will start production of the gloves in the coming weeks.

• Successful concept to be continued in 2022

For three years now, the Trevira CS joint fair booth, where Trevira, its customers and partners present their new ideas within the framework of an innovative creative concept, has been an established and popular feature of Heimtextil. In 2021, the international trade fair for home and contract textiles is planned to take place from 12-15 January in Frankfurt/Main. However, as a result of the numerous uncertainties brought about by the coronavirus crisis, Trevira has decided that it will not take part next year.

“Messe Frankfurt has shown us its comprehensive hygiene concept and plans and there is no question that their plans fully meet health and safety requirements,” explained Trevira CEO Klaus Holz. “But at Trevira, we are also very much aware of our responsibilities. Our joint booth concept is not only on an extensive scale, but it is also built around the idea of communication. This makes it even more important that we consider the potential risks involved and how they could impact our customers, co-exhibitors, visitors and staff.” Given the uncertainty as to how the situation might develop in the future, Trevira has decided it has no option but to withdraw from next year’s fair and postpone its participation in Heimtextil until 2022. This decision has been made in agreement with parent company Indorama Ventures PCL (Thailand), which has put stringent measures in place to keep its staff and customers safe. As a result, the concern and its subsidiaries are not currently participating in any trade fairs.

At the 2020 Heimtextil, Trevira exhibited together with around 30 of its major Trevira CS customers with a joint booth whose total floor area measured over 2,000 msq. The number of partners exhibiting alongside Trevira has increased steadily over the past three years, and the Trevira display, along with many of the newest flame retardant Trevira CS collections from its customers, has always been hugely popular at the fair, especially in Hall 4.2, where it has continually attracted a very high number of visitors. As a joint booth, it has benefited especially from the vibrant and positive discussions among visitors and exhibitors, together with the various events that accompany the display. Usually, these included a press conference and a party held at the new stand. Trevira’s Heimtextil presence in the past three years has strengthened and expanded the position of Trevira CS as the leading brand for flame retardant home textiles.

CEO Klaus Holz said, “As a regular exhibitor at Heimtextil for many years, we found this decision extremely difficult. We greatly regret that we will not be able to bring our joint booth to Heimtextil next year. However, we plan to return in 2022 with a fair booth offering visitors and partners the high quality they have come to expect of us, with brand new ideas and measures in place to ensure its success”.

Messe Frankfurt India has announced new dates for the Mumbai edition of Screen Print India - the leading trade fair for screen, textile, sublimation and digital printing technologies The exhibition will be held in parallel with Gartex Texprocess India, from 19 – 21 March 2021 at the Bombay Exhibition Centre in Mumbai. With the gradual re-opening of commercial activities and businesses, the co-located fairs will enable the industry to channel their efforts back towards business development and cater to the needs of screen printing, textile and garment manufacturing industry players as it gears up to bring the production and manufacturing value chain under one roof.
 
While the focus segments under Gartex Texprocess India will draw attention to innovations in garmenting & apparel machinery, the product launches and live demos at Screen Print India will enable business visitors and traders to track technological advances in digital textile and screen-printing technologies. The secure, business-focused ambience will enable both printing and textile sector players to showcase, source and strengthen their supply chains and keep pace with the shifting demand for screen printing, textile printing, digital and sublimation technologies across other sectors.
 
Screen Print India will also host a series of sessions on processes and innovations related to the graphics industry. Another key highlight of this successful trade fair is the Screen Print Excellence Awards that upholds a strong tradition of honouring technology inventors and trailblazers within the screen-printing industry. With this in mind, the Mumbai edition will curate a special “SPI Gallery” to showcase award winning pieces of screen-printing excellence.

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the manufacture of hygiene nonwovens, Oerlikon Nonwoven offers its new QSR (Quality Sized Right) systems. Here, the benefits of the Chinese machine construction partner’s nonwoven formation are integrated into the complete solution. The advantage for nonwovens producers: highly competitive solutions at attractive prices with comparably low investment.

Cost-efficiently manufacturing meltblown nonwovens
New, unique and highly sophisticated filter media can be easily and efficiently manufactured thanks to Oerlikon Nonwoven’s optimized meltblown technology. Whether as a stand-alone system with one or several positions, as ‘plug & produce’ installations for already existing systems or in conjunction with other technologies: the Oerlikon Nonwoven meltblown process already enables the cost-efficient manufacture of meltblown nonwovens with the quality requirements of tomorrow. Ever more producers are choosing the meanwhile extensively tried-and-tested and consistently further-developed Oerlikon Nonwoven meltblown solutions.

Airlaid technology for the nonwovens of tomorrow
Pulp or cellulose fibers as raw material for manufacturing nonwovens are currently virtually unrivaled with regards to sustainability and environmental compatibility. The Oerlikon Nonwoven airlaid process is the ideal solution for processing this raw material into high-end products for a wide range of applications. Today, there is huge demand for manufacturing solutions for high-quality, lightweight airlaid nonwovens with economically attractive production speeds and system throughputs. In this area, the patented Oerlikon Nonwoven formation process – which also permits the homogeneous mixing of the most diverse raw materials, while simultaneously guaranteeing superb evenness and homogeneous fiber laying – is setting standards even for nonwovens with low running meter weights. And the benefits of this technology are also increasingly gaining significance in sustainable recycling applications.

P&G patented PHANTOM technology from Teknoweb Materials
Also being showcased at the trade fair stand is the P&G patented PHANTOM technology from Teknoweb Materials, Oerlikon Nonwoven’s strategic partner for hygiene products and wipes. The PHANTOM technology is released to Teknoweb Materials by P&G in worldwide exclusive license. The PHANTOM technology is the superior dry laid alternative technology for manufacturing wet wipes from pulp and polymer fibers, for example. Compared to conventional, known processes, this technology offers superior performances with cost advantage in much more eco-friendly products. Dispensing with hydroentanglement renders subsequent drying of the material redundant. Targeted process management allows the optimal setting of the relevant product parameters such as softness, tenacity, dirt absorption and liquid absorption.

Retailers invest in emotionalisation and digitalisation +++ Top theme: linking online with offline shopping +++ Focus on sustainability +++ Accompanying Stages and Specials received very well

The World’s No.1 Retail Trade Fair, EuroShop 2020, drew to a close on Thursday (20 February 2020) after five successful days in Düsseldorf: 2,300 exhibitors from 57 nations reported of very good leads and concluded business deals. Furthermore, lively follow-up business is expected. 94,000 visitors travelled to the Rhine to gather information on the line-up of products, trends and concepts for retailers and their partners featured in 16 exhibition halls.  

“We are delighted that EuroShop once again successfully proved to be the most relevant platform for the global retail community when it comes to trends, inspirations and networking. Our exhibitors deserve the highest praise for their loyalty. With their innovative power they again proved the major attraction for an entire industry,” said Erhard Wienkamp, Managing Director at Messe Düsseldorf, voicing his great satisfaction with EuroShop 2020 results.

Exhibitors especially applauded the high international attendance at EuroShop. 70% of the EuroShop audience travelled to Düsseldorf from abroad. Large delegations came for example from Brazil, Australia and New Zealand. Trade visitors from a total of 142 countries attended EuroShop 2020.

“This high level of international interest clearly documents the dynamism of the global retail world and the exceptional position EuroShop enjoys as its economic engine,” said Michael Gerling, Chairman of the EuroShop Advisory Board and CEO of the EHI Retail Institute Cologne.

“The success of eCommerce is a real encouragement for retailers: they have understood they have to give their shoppers good reasons beyond the ranges to enter their stores. This competition has taken retail as a whole to the next quality level. Investment is being made in shop fitting so as to create customer journeys,” explains Gerling who adds: “Beyond this, retail digitalisation is booming. It enables retailers to offer their shoppers even more services and link online and offline channels, on the one hand, while simplifying process flows, logistics and lots more, on the other.” At EuroShop 2020 digital transformation was therefore a key focus, also in terms of achieving the highest energy efficiency and sustainability possible.

Exhibitors underlined the high level of expertise among visitors at the event, especially their pronounced decision-making powers, because 70% of the trade fair guests were in international top management. Many of them also used their visit to EuroShop to learn about best practice cases and forward-looking trends in retail at the in total eight Stages. The varied programme of lectures held on the individual Stages on such topics as Retail Technology, Architecture and Store Design or Expo & Event was well attended across the board. Meeting with the same high level of approval were the numerous Specials at EuroShop, including the Start-up Hub, the Designer Village and Premium City.

Numbers speak for themselves here: 96% of trade fair visitors were satisfied with their visit to the trade fair. Just as many confirmed the outstanding position of EuroShop as a trend barometer, networking platform and largest event for the retail sectors.

Due to the current situation associated with the Coronavirus 19.000 visitors less attended this time than at the record event 2017.

The next EuroShop will be held in Düsseldorf from 26 February to 2 March 2023.  

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

•    Composite battery enclosures for e-mobility
•    Flexible new leaf spring generation for rear axles
•    Innovative component designs for passenger airplanes, helicopters and air taxis
•    Extremely lightweight and stable transfer beam for mechanical engineering

Selective applications with focus on serial production
In the field of automotive applications, SGL Carbon will present at the JEC World composite battery enclosures as a promising new application driven by increasing demand for electric vehicles and the resulting new flexible chassis platforms. The company demonstrates a prototype of a battery enclosure based on carbon fibers. However, hybrid composites with a mixture of glass and carbon fibers are also possible.

In the aerospace sector, SGL Carbon is also expanding its portfolio of realized projects and expertise relying on the trend to use more efficient materials and processes in this industry too.
In the area of primary structure components, the company will present a demo exhibit for the door frame of a passenger airplane realized in collaboration with external partners and based on 50k carbon fiber from the SGL Carbon, which is suitable for serial production.

Live simulations and intense exchange at the booth
Visitors can experience live how their ideas can be implemented both sustainably and cost-effectively in composites thanks to simulations. Experts from the company’s own Lightweight and Application Center demonstrate the path from the concept to virtual prototypes using simulation software, with the result visible either to the entire audience or just individual visitors. To prepare, interested parties can contact the team now at the following link: https://www.sglcarbon.com/anmeldung-jec.

On March 4, 2020, the SGL Carbon stand will host its traditional get-together for customers and friends starting at 4 p.m. – no registration necessary.
 

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

Intertextile Shanghai Home Textiles – Autumn Edition will return from 24 – 26 August 2020 at the National Exhibition and Convention Center (Shanghai), organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). Stepping into its 26th edition, the trade fair will provide exhibitors the perfect opportunity to introduce new products and expand their distribution networks, as well as serving as a source of information and inspiration for professionals in every aspect of the industry.
 
Celebrating its 25th anniversary last August, the Autumn Edition of Intertextile attracted 1,147 exhibitors from 27 countries & regions, as well as 35,390 trade buyers from 117 countries & regions (2018: 104), reflecting the increasing internationalism of Messe Frankfurt’s textile fairs in China, and the growing opportunities for international suppliers to meet a wide range of buyers in Shanghai. The trade fair’s capacity to attract large and diverse crowds has reinforced its status as the leading business platform for the home textile industry in the Asia Pacific region.
 
In the next edition, a large collection of quality Chinese companies, as well as premier overseas brands will once again present the entire spectrum of home and contract textile products including:

• Textile editors
• Whole Home Products
• Windows & Upholstery
• Bedding, Bath, Kitchen & Table
• Carpets & Rugs
• Sun-Protection
• Wallcovering
• Digital Print & Technics
• Fibers, Yarns & Chemicals
• Textile Designs

Opportunities abound in China’s home textiles market
 
“The upcoming Autumn Edition of Intertextile is set to offer suppliers and buyers the best platform to capture new business opportunities, especially as we continue to focus on bringing together more key players from the textiles, interiors, architecture and hospitality sectors in China and internationally,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.
 
“Over the years, Intertextile has been evolving from a traditional trade fair to an immersive and interactive experience that inspires and engages attendees. Today, the fair is more than a business platform; it also delivers state-of-the-art home trends, valuable networking opportunities, as well as innovative and strategic solutions for brand development through a series of fringe programme events,” Ms Wen further explained.
 
As one of the selected exhibitors featured in the Talks & Tours series at the 2019 fair, Mr Thomas Luys, Sales Manager of LIBECO-LAGAE: “We had quite a diverse range of visitors, including an increase in e-commerce buyers, but also more traditional upholstery fabrics buyers. Our booth was also part of the Talks & Tours, so it was important to tell our story to a diverse range of visitors on this tour.”
 
 
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Color Pop Compacting also for PA6 yarns
Until now, it was difficult to produce highly color-separated or accentuated BCF yarns from polyamide 6, but in the future, this will be possible thanks to the CPC-T. Thanks to the new design, the CPC-T is now also suitable for processes with low thread tensions.

Services Galore for a Successful Trade Fair Visit

Interactive hall map +++ My Organizer +++ New Matchmaking Tool +++ EuroShop-App +++ Stage agendas online from January +++ Online Ticketshop open now +++ EuroShop.mag

Less than three months to go before EuroShop 2020, The World’s No.1 Retail Trade Fair, opens its doors. From 16 to 20 February to the tune of 2,300 exhibitors from 60 nations will occupy 16 halls of Düsseldorf Exhibition Centre. Trade visitors should also start planning their visit to the trade fair now to leverage the ranges. EuroShop boasts a plethora of services that help trade fair guests from throughout the world make their visit a resounding success.