From the Sector

Reset
42 results
30.12.2022

Composites United declares membership in Composites Germany

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

VDMA and Leichtbau BW will continue to support the work of Composites Germany as associate members and contribute the know-how of their members. Together, the organisations will promote sustainable lightweight construction as a key technology for Germany, focusing on composites materials, says Prof. Klaus Drechsler of Composites United, one of the two board members of Composites Germany. As a network and mouthpiece of the composites industry, Composites Germany bundles the interests of its members. The aim is to continuously expand activities, promote innovations and technologies, develop new markets and new value chains, and anchor training and further education, adds his board colleague Dr Michael Effing of AVK. The agreement was concluded on 29 November 2022 during the JEC Forum DACH in Augsburg, where both associations were cooperation partners of the event.

Source:

Composites Germany

Photo: AkzoNobel
Ben Noteboom
20.12.2022

Ben Noteboom to be nominated as AkzoNobel Supervisory Board member

AkzoNobel has announced that Ben Noteboom will be nominated as a member of the Supervisory Board at the Annual General Meeting being held in April 2023. The Supervisory Board intends to subsequently elect him as Chair, succeeding Nils Andersen, who will retire as Chair and member of the Supervisory Board at the same time.

Noteboom is Chairman of Vopak’s Supervisory Board and a member of the Supervisory Board of Aegon. He also chairs the Board of Trustees of the Cancer Center Amsterdam. His former roles include CEO and Chairman of the Board of Management at Randstad, while he held different management positions at Dow Chemicals for nearly nine years.

Commenting on the announcement, Byron Grote, says: “The Supervisory Board is very pleased to announce the nomination of Ben Noteboom. His strong track record in executive and non-executive roles, and his broad experience in different industries – including the chemical industry – will be valuable additions to AkzoNobel.”

AkzoNobel has announced that Ben Noteboom will be nominated as a member of the Supervisory Board at the Annual General Meeting being held in April 2023. The Supervisory Board intends to subsequently elect him as Chair, succeeding Nils Andersen, who will retire as Chair and member of the Supervisory Board at the same time.

Noteboom is Chairman of Vopak’s Supervisory Board and a member of the Supervisory Board of Aegon. He also chairs the Board of Trustees of the Cancer Center Amsterdam. His former roles include CEO and Chairman of the Board of Management at Randstad, while he held different management positions at Dow Chemicals for nearly nine years.

Commenting on the announcement, Byron Grote, says: “The Supervisory Board is very pleased to announce the nomination of Ben Noteboom. His strong track record in executive and non-executive roles, and his broad experience in different industries – including the chemical industry – will be valuable additions to AkzoNobel.”

Adds Ben Noteboom: “I’m excited about the opportunity to join AkzoNobel’s Supervisory Board and look forward to contributing to the next phase of the company’s transformation as it makes further progress to becoming a frontrunner in the industry.”

Source:

AkzoNobel

Copyright: MK-Fotografie & JECDachforum
from left to right: Dirk Punke, Gerhard Lettl, Dr. Michael Effing, AVK-GF Dr. Elmar Witten, Prof. Jens Ridzewski, Michael Polotzki
08.12.2022

AVK Federation of Reinforced Plastics board unanimously re-elected

The German Federation of Reinforced Plastics (AVK) re-elected its previous Board on 29 November 2022 in Augsburg during the regular Board elections at the JEC Forum DACH.

At the constituent board meeting on 6 December 2022, the board positions were also confirmed. Dr. Michael Effing, Managing Director of AMAC GmbH, remains Chairman of the Board, and Dirk Punke, Managing Director of BÜFA Thermoplastics Composites GmbH, is Deputy Chairman. Treasurer is Prof. Jens Ridzewski, IMA Materialforschung und Anwendungstechnik GmbH, the other board members: Gerhard Lettl, Managing Director C.F. Maier Europlast GmbH & Co. KG and Michael Polotzki, Managing Director Menzolit S.r.L. The board is officially in office for three years from 1.1.2023.

"It's nice to see the Board's work so well evaluated that there is no doubt that this will continue for the next legislative period. We are very much looking forward to that," explains Managing Director Dr Elmar Witten, the members' vote. The general meeting took place during the JEC Forum DACH.

The German Federation of Reinforced Plastics (AVK) re-elected its previous Board on 29 November 2022 in Augsburg during the regular Board elections at the JEC Forum DACH.

At the constituent board meeting on 6 December 2022, the board positions were also confirmed. Dr. Michael Effing, Managing Director of AMAC GmbH, remains Chairman of the Board, and Dirk Punke, Managing Director of BÜFA Thermoplastics Composites GmbH, is Deputy Chairman. Treasurer is Prof. Jens Ridzewski, IMA Materialforschung und Anwendungstechnik GmbH, the other board members: Gerhard Lettl, Managing Director C.F. Maier Europlast GmbH & Co. KG and Michael Polotzki, Managing Director Menzolit S.r.L. The board is officially in office for three years from 1.1.2023.

"It's nice to see the Board's work so well evaluated that there is no doubt that this will continue for the next legislative period. We are very much looking forward to that," explains Managing Director Dr Elmar Witten, the members' vote. The general meeting took place during the JEC Forum DACH.

Source:

AVK Industrievereinigung Verstärkte Kunststoffe

© Freudenberg Performance Materials
19.09.2022

Freudenberg hosts German National Hydrogen Council meeting

Freudenberg Performance Materials – the Freudenberg Group’s nonwovens specialist – was hosting a meeting of the German National Hydrogen Council at the Freudenberg headquarters in Weinheim, Germany, on September 16. As a leading global supplier of technical textiles, Freudenberg Performance Materials provides fuel cell components for mobility applications and for electrolyzers used to produce CO2-free hydrogen.

Freudenberg Performance Materials – the Freudenberg Group’s nonwovens specialist – was hosting a meeting of the German National Hydrogen Council at the Freudenberg headquarters in Weinheim, Germany, on September 16. As a leading global supplier of technical textiles, Freudenberg Performance Materials provides fuel cell components for mobility applications and for electrolyzers used to produce CO2-free hydrogen.

The German National Hydrogen Council was appointed by the German government and acts as an independent, non-partisan advisory board. The council board currently consists of 25 high-ranking experts in the fields of economy, science and civil society. The objective is to assist and advise the State Secretaries’ Committee on Hydrogen in the further development and implementation of Germany’s National Hydrogen Strategy. Council meetings are hosted by one of the board members to enable the council to deepen its knowledge of the relevant technologies, value chain roles and challenges. Dr. Silke Wagener is a member of the council board, and represents the Freudenberg technology group, giving input on suppliers’ know-how as well as contributing her decades-long expertise in technological solutions for the hydrogen industry.

During a tour of the factory organized for the council board members, Freudenberg Performance Materials explained the development and production of performance-critical gas diffusion layers manufactured from carbon fiber-based nonwovens for fuel cells and porous transport layers for electrolyzers. The tour highlighted the potential for improvements from a supplier’s perspective, such as the need for very timely exchange and collaboration along the value chain. Functioning, unbroken and scalable value chains, in parallel with the development and scaling of hydrogen infrastructure, are key prerequisites for the hydrogen industry to fulfill its vital role in the transformation to climate neutrality.

Gas diffusion layers are one of the main components at the heart of the fuel cell. Their function is to transport gases and liquids in the cells. They have a significant impact on system performance and costs, and are indispensable for the functioning of fuel cells. The same applies for porous transport layers that are the key component of electrolyzers for the CO2-free production of what is called green hydrogen.

Fuel cells in combination with green hydrogen are an important technology for CO2-free mobility, in particular with reference to buses, heavy-duty trucks and trains. Other uses include stationary applications such as stationary power generation or heat generation in buildings or industry.
Apart from mobility, green hydrogen also plays a key role in climate-neutral energy supplies in the industrial sector, particularly in the chemical and steel industries.

Source:

Freudenberg Performance Materials

Photo: Reifenhäuser GmbH & Co. KG Maschinenfabrik
08.09.2022

Ulrich Reifenhäuser receives the Georg Menges Award

Ulrich Reifenhäuser, CSO of the Reifenhäuser Group, was awarded the prestigious Georg Menges Prize 2022 at the 31st International Colloquium on Plastics Technology in Aachen from September 7-8, 2022. The prize recognizes individuals or groups who have rendered outstanding services to the transfer of research results into industrial practice. The sponsors of the award are the Plastics and Rubber section of Germany's Mechanical Engineering Industry Association (VDMA), together with PlasticsEurope Deutschland and the Association of Sponsors of the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH University. The award is traditionally presented every two years during the colloquium organized by the IKV. Ulrich Reifenhäuser is the first businessman to receive the Georg Menges Award.

Ulrich Reifenhäuser, CSO of the Reifenhäuser Group, was awarded the prestigious Georg Menges Prize 2022 at the 31st International Colloquium on Plastics Technology in Aachen from September 7-8, 2022. The prize recognizes individuals or groups who have rendered outstanding services to the transfer of research results into industrial practice. The sponsors of the award are the Plastics and Rubber section of Germany's Mechanical Engineering Industry Association (VDMA), together with PlasticsEurope Deutschland and the Association of Sponsors of the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH University. The award is traditionally presented every two years during the colloquium organized by the IKV. Ulrich Reifenhäuser is the first businessman to receive the Georg Menges Award.

The award was presented by Professor Dr.-Ing. Christian Hopmann, Director of the IKV and Dr.-Ing. Herbert Müller, Chairman of the Board of the IKV Sponsors' Association. In his laudatory speech, Professor Hopmann highlighted Ulrich Reifenhäuser's great and successful commitment to the industry and his tireless search for optimal solutions that are sustainable in the best sense of the word, and praised him as a personality of integrity and integration. "The Georg Menges Prize is awarded for the consistent implementation of research and innovation in industry. The previously described achievements of our prizewinner would certainly have been enough to receive the award but, for the sponsors of the Prize, what was especially important and the key argument for their decision was Ulrich Reifenhäuser’s honorary dedication to the K tradefair," explained Professor Hopmann.

Ulrich Reifenhäuser has been a member of the Reifenhäuser Group management since 1992 and is responsible for international line sales. Together with his brother Bernd Reifenhäuser, he manages the company in the third generation. Ulrich Reifenhäuser has been a board member of the VDMA Plastics and Rubber Machinery Association for more than 25 years and has been its chairman since 2010. In 2020, he was inducted into the Plastics Hall of Fame, as was the award's namesake, and in 2022 he will be co-chairing the world's leading plastics trade fair in Düsseldorf for the seventh time in a row as "President of K show."

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Alberto Paccanelli Photo: Euratex
Alberto Paccanelli
17.06.2022

Alberto Paccanelli re-elected as President of EURATEX

Italian textile entrepreneur, Alberto Paccanelli, has been re-elected as President of EURATEX during its General Assembly on 17 June; he will thus extend his mandate with 2 more years, until June 2024. Paccanelli is CEO of the Martinelli Ginetto Group, active in the high-end home textiles. He is also a Board member of Sistema Moda Italia and Confindustria Bergamo.

Italian textile entrepreneur, Alberto Paccanelli, has been re-elected as President of EURATEX during its General Assembly on 17 June; he will thus extend his mandate with 2 more years, until June 2024. Paccanelli is CEO of the Martinelli Ginetto Group, active in the high-end home textiles. He is also a Board member of Sistema Moda Italia and Confindustria Bergamo.

On the occasion of his re-election, Paccanelli presented his vision on the future of the European textiles industry: “With the adoption of the EU Textile Strategy on 30 March, the European Commission  has launched a very ambitious journey that will change the nature of our industry: more focus on sustainability and durability, more transparency within the supply chain, more communication with the consumer, but also a better level playing field for our European companies, and more investment in innovation, digitalisation and skills development. That is a very ambitious agenda, which needs to result in a more resilient European textile industry. The coming 2 years will be critical to translate that vision into specific legislation and concrete programmes. This requires a strong EURATEX, to actively contribute to that process. I am honoured to continue leading the organisation and fulfil this challenging task.”

EURATEX GA also elected 4 other members of the Presidency Team: Bodo Bölzle (Amann, Germany), Jean François Gribomont (Utexbel, Belgium), Grégory Marchant (UTT, France) and Ismail Kolunsag (Cross Tekstil, Turkey). During the Assembly, EURATEX also welcomed new memberships from Ukrlegprom (Ukraine) and Astrico (Romania), and a partnership with Inditex (Spain).

Source:

Eurtaex

adidas announces the appointment of Alasdhair Willis to Chief Creative Officer. (a) adidas
Alasdhair Willis
23.03.2022

Alasdhair Willis to Shape Future of adidas as Chief Creative Officer

The Chief Creative Officer is the lead within the adidas design community and is responsible for shaping, defining, and shepherding the creative direction for the global brand and its three major labels – Performance , Originals, and Sportswear – to deliver a unified adidas brand experience. Willis will begin his contract beginning of April, reporting to Executive Board Member of Global Brands, Brian Grevy.

Willis is a creative visionary with a long-standing connection to adidas that dates back to 2005, most notably through his role in the concept and development of adidas by Stella McCartney in partnership with Stella McCartney He has remained integral to the growth and development of the partnership since its launch.

Beyond adidas by Stella McCartney, Willis has built a strong understanding of the company’s consumers, brand, labels, and categories through his work on a number of breakthrough projects, including a lead role in developing some of adidas’ most iconic material innovations.

The Chief Creative Officer is the lead within the adidas design community and is responsible for shaping, defining, and shepherding the creative direction for the global brand and its three major labels – Performance , Originals, and Sportswear – to deliver a unified adidas brand experience. Willis will begin his contract beginning of April, reporting to Executive Board Member of Global Brands, Brian Grevy.

Willis is a creative visionary with a long-standing connection to adidas that dates back to 2005, most notably through his role in the concept and development of adidas by Stella McCartney in partnership with Stella McCartney He has remained integral to the growth and development of the partnership since its launch.

Beyond adidas by Stella McCartney, Willis has built a strong understanding of the company’s consumers, brand, labels, and categories through his work on a number of breakthrough projects, including a lead role in developing some of adidas’ most iconic material innovations.

Outside of his work with adidas he is revered for his tenure as Creative Director of British fashion heritage brand, Hunter, transforming what was a small single product business into a multi-category global fashion brand, and as co-founder of the trailblazing Wallpaper* Magazine. It is through this diverse experience that Willis brings not just creative expertise, but the ability to deliver across commercial, strategic, and leadership functions.

As Chief Creative Officer at adidas, Willis will provide global creative leadership, develop and nurture the brand’s creative culture, and empower teams across all design functions.

“Stepping into a permanent role at adidas and evolving our partnership is a great privilege and feels like an incredibly exciting and natural next step,” said Willis. “The power and influence of the brand on sport , sports culture, and beyond is immeasurable. I welcome the opportunity to help establish a new era of design and brand leadership at adidas and, together with the team, take adidas to even higher levels.”

“Alasdhair is a true icon of the industry and together we have produced some of adidas’ most innovative work, so to now have him lead our design community and set the future of our brand expression is a wonderful thing,” said Executive Board Member of Global Brands, Brian Grevy. “We are looking forward to seeing the influence of his unique creative vision, experience and expertise from developing and establishing some of the world’s most recognised brands.”

 

More information:
adidas Alasdhair Willis
Source:

adidas

INDA Announces Six New Board Members and Officers (c) INDA
INDA New BOD Members 2022
08.03.2022

INDA Announces Six New Board Members and Officers

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

  • Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

  • Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

  • Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

  • Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

  • Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

  • Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

Source:

INDA, Association of the Nonwoven Fabrics Industry

(c) adidas AG
Roland Auschel, Executive Board member, responsible for Global Sales
22.02.2022

adidas Supervisory Board extends appointments of Roland Auschel and Brian Grevy

The Supervisory Board of adidas AG extended the appointment of Executive Board member Roland Auschel, responsible for Global Sales, by two years beyond 2022 until the end of 2024. Roland Auschel has been member of the Executive Board of adidas AG since 2013. At the same time, the Supervisory Board of adidas AG extended the appointment of Executive Board member Brian Grevy, responsible for Global Brands, by five years beyond 2022 until early 2028. Brian Grevy has been member of the Executive Board of adidas AG since 2020.

“On behalf of the Supervisory Board, I am very pleased to announce that we have extended the appointments of both Roland and Brian. Our long-term strategy ‘Own the Game’ has the consumer at its heart. Both Roland and Brian play key roles in bringing this consumer focus to life with their respective functions. We are convinced that they will continue the successful execution of our strategy together with the entire Executive Board”, stated Thomas Rabe, Chairman of the Supervisory Board of adidas AG.

The Supervisory Board of adidas AG extended the appointment of Executive Board member Roland Auschel, responsible for Global Sales, by two years beyond 2022 until the end of 2024. Roland Auschel has been member of the Executive Board of adidas AG since 2013. At the same time, the Supervisory Board of adidas AG extended the appointment of Executive Board member Brian Grevy, responsible for Global Brands, by five years beyond 2022 until early 2028. Brian Grevy has been member of the Executive Board of adidas AG since 2020.

“On behalf of the Supervisory Board, I am very pleased to announce that we have extended the appointments of both Roland and Brian. Our long-term strategy ‘Own the Game’ has the consumer at its heart. Both Roland and Brian play key roles in bringing this consumer focus to life with their respective functions. We are convinced that they will continue the successful execution of our strategy together with the entire Executive Board”, stated Thomas Rabe, Chairman of the Supervisory Board of adidas AG.

10.06.2021

Avgol names Tommi Bjornman as new CEO

Avgol, a subsidiary of global petrochemical producer Indorama Ventures Public Company Limited (IVL),  appointed Mr. Tommi Bjornman as its new CEO, replacing Mr. Shachar Rachim who takes up a broader role as CEO leading the Hygiene vertical of IVL’s Fibers business.

Mr. Bjornman’s new position with Avgol took effect on 1 June, 2021. The Hygiene business is one of 16 integrated verticals under Indorama Ventures, and comprises brands including Avgol, Auriga, FiberVisions, ES FiberVisions, Trevira and Wellman. The Hygiene vertical provides fibers and filaments used in hygiene, medical, personal protective equipment (PPE) and industrial disposable applications as well as durable textile applications used for automotive interiors, furnishings, wall and window coverings and related goods. Mr. Bjornman continues to report to Mr. Rachim who retains his role as an Avgol Board member.

Avgol, a subsidiary of global petrochemical producer Indorama Ventures Public Company Limited (IVL),  appointed Mr. Tommi Bjornman as its new CEO, replacing Mr. Shachar Rachim who takes up a broader role as CEO leading the Hygiene vertical of IVL’s Fibers business.

Mr. Bjornman’s new position with Avgol took effect on 1 June, 2021. The Hygiene business is one of 16 integrated verticals under Indorama Ventures, and comprises brands including Avgol, Auriga, FiberVisions, ES FiberVisions, Trevira and Wellman. The Hygiene vertical provides fibers and filaments used in hygiene, medical, personal protective equipment (PPE) and industrial disposable applications as well as durable textile applications used for automotive interiors, furnishings, wall and window coverings and related goods. Mr. Bjornman continues to report to Mr. Rachim who retains his role as an Avgol Board member.

Source:

Indorama Ventures Public Company Limited / phd marketing

04.06.2021

Election of a new EPTA Board

During its members meeting of June 2nd, 2021, the European Pultrusion Technology Association (EPTA) elected a new board. All EPTA board members who stood for re-election have been confirmed again. Dr. Elmar Witten, Secretary of the EPTA, is happy about the continuity in the line-up of the EPTA board. "We will continue the current marketing activities to promote the pultrusion process," said Witten.

Thus, the board members for the next 4 years are:
Dr. Luigi Giamundo, ATP srl., Italy (Chairman)
Alfonso Branca, TOP GLASS, Italy
Dietmar Kühne, Ernst Kühne Kunststoffwerk, Germany
Sebastian Mehrtens, Fibrolux, Germany
Eric Moussiaux, Exel Composites, Belgium
Martin Zelinka, Owens Corning, France

Pultrusion is an important and continuously growing segment in the composites industry. It is a continuous manufacturing process of linear composite profiles made of polymeric resins such as polyesters and fiber reinforcement such as glass fibers. Automated Pultrusion Production Technology facilitates today's High Quality and Low-Cost demands by the market.

During its members meeting of June 2nd, 2021, the European Pultrusion Technology Association (EPTA) elected a new board. All EPTA board members who stood for re-election have been confirmed again. Dr. Elmar Witten, Secretary of the EPTA, is happy about the continuity in the line-up of the EPTA board. "We will continue the current marketing activities to promote the pultrusion process," said Witten.

Thus, the board members for the next 4 years are:
Dr. Luigi Giamundo, ATP srl., Italy (Chairman)
Alfonso Branca, TOP GLASS, Italy
Dietmar Kühne, Ernst Kühne Kunststoffwerk, Germany
Sebastian Mehrtens, Fibrolux, Germany
Eric Moussiaux, Exel Composites, Belgium
Martin Zelinka, Owens Corning, France

Pultrusion is an important and continuously growing segment in the composites industry. It is a continuous manufacturing process of linear composite profiles made of polymeric resins such as polyesters and fiber reinforcement such as glass fibers. Automated Pultrusion Production Technology facilitates today's High Quality and Low-Cost demands by the market.

14.04.2021

Resolutions adopted by the virtual Annual General Meeting of Lenzing AG

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

Fully on track strategically
The Managing Board of Lenzing AG presented the business development of the year 2020, a strategic outlook and sustainability strategy including the relevant roadmap to achieve climate targets to the participating shareholders. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by the year 2030. The goal is to operate in a climate-neutral manner by 2050.

The substantial investments made in Thailand and Brazil not only support Lenzing in its transformation to a supplier of environmentally compatible specialty fibers but also comprise an important milestone on this journey which sustainably increases the company’s enterprise value.

The implementation of these two key projects is proceeding ahead as planned in spite of the direct impacts of the coronavirus crisis. The pulp plant in Brazil is scheduled to be put into operation in the first half of 2022 and will significantly increase Lenzing’s own in-house supply of dissolving pulp. Production in Thailand is expected to commence towards the end of 2021, further raising the share of eco-friendly specialty fibers in the Lenzing product portfolio.

New appointments to the Supervisory Board
Dr. Veit Sorger retired from the Supervisory Board of Lenzing AG on his request effective at the end of the Annual General Meeting. Veit Sorger had been a Member of the Supervisory Board since 2004 (also serving as Deputy Chairman since 2011) and served on various Supervisory Board committees.

The Annual General Meeting elected Dr. Markus Fürst, Managing Director of B&C Industrieholding GmbH, and Thomas Cord Prinzhorn, MBA, CEO of Prinzhorn Holding GmbH, to serve on the Supervisory Board until the end of the Annual General Meeting resolving upon the discharge of the Supervisory Board members for the business year 2024.

Source:

Lenzing AG

24.03.2021

NCTO elects Chairman, Council Chairs and Board Members

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2021 today.

NCTO has re-elected David Roberts, CEO of Cap Yarns, as Chairman and David Poston, President of Palmetto Synthetics, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its four councils. NCTO is comprised of four councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.*

“This is a critical juncture for our industry, which answered the call of the nation to produce lifesaving personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic,” said NCTO President and CEO Kim. “We will continue to engage with all stakeholders to press for policies that support the industry overall, help onshore PPE production and create a permanent domestic supply chain.”

 

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2021 today.

NCTO has re-elected David Roberts, CEO of Cap Yarns, as Chairman and David Poston, President of Palmetto Synthetics, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its four councils. NCTO is comprised of four councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.*

“This is a critical juncture for our industry, which answered the call of the nation to produce lifesaving personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic,” said NCTO President and CEO Kim. “We will continue to engage with all stakeholders to press for policies that support the industry overall, help onshore PPE production and create a permanent domestic supply chain.”

 

*See attached document for more information.

DIGEL AG: Neuer Head of Sportswear (c) DIGEL AG
Thomas Beller
07.01.2021

DIGEL AG: New Head of Sportswear

Since 1 January 2021, Thomas Beller has been responsible for the sportswear division of the Digel brand in the newly created position of HEAD OF SPORTSWEAR.

Thomas Beller was responsible for the sportswear of the Strellson brand for many years.
Most recently, he was responsible for the product and design of the Navy Boot brand.

"We are pleased that we have been able to win Thomas Beller, an experienced leader in the field of product and design, for the Digel brand. With his expertise, Mr Beller will help us to successfully implement the growth strategy for the Digel brand," says Marc Svojanovsky, Board Member for Product, Marketing and Sales.

Ralf Kammerer will continue to be responsible for formal wear at Digel as HEAD OF FORMALWEAR. Both report directly to the board member Marc Svojanovsky.

Since 1 January 2021, Thomas Beller has been responsible for the sportswear division of the Digel brand in the newly created position of HEAD OF SPORTSWEAR.

Thomas Beller was responsible for the sportswear of the Strellson brand for many years.
Most recently, he was responsible for the product and design of the Navy Boot brand.

"We are pleased that we have been able to win Thomas Beller, an experienced leader in the field of product and design, for the Digel brand. With his expertise, Mr Beller will help us to successfully implement the growth strategy for the Digel brand," says Marc Svojanovsky, Board Member for Product, Marketing and Sales.

Ralf Kammerer will continue to be responsible for formal wear at Digel as HEAD OF FORMALWEAR. Both report directly to the board member Marc Svojanovsky.

More information:
Digel AG Sportswear
Source:

DIGEL AG

First direct complete train with Austrian TENCEL™ fibers arrives in China after 16 days (c) Lenzing AG / Foto: Scheiblecker
Von Links nach Rechts: Stefan Doboczky, Vorstandsvorsitzender der Lenzing Gruppe; Erich Hampel, Vorstandsvorsitzender der B&C Privatstiftung; Leonore Gewessler, Bundesministerin für Klimaschutz, Umwelt, Energie, Mobilität, Innovation und Technologie; Erwin Cootjans, CEO Nunner Logistics; seine Exzellenz Xiaosi Li, Botschafter der Volksrepublik China in Österreich; Thomas Kargl, Vertriebsvorstand ÖBB Rail Cargo Group
09.09.2020

First direct complete train with Austrian TENCEL™ fibers arrives in China after 16 days

  • The Lenzing Group was the first Austrian company to send goods 100 percent “Made in Austria” by train directly to China.
  • The train loaded with TENCEL™ fibers reached Xinzhu station in Xi'an on September 05.

Xi’an, China – The Lenzing Group is breaking new ground due to the short-term increase in demand for sustainably produced fibers from Chinese customers. For the first time, the company delivered wood-based cellulosic fibers, which are produced at the Austrian sites in Lenzing and Heiligenkreuz, directly to China by train. Thanks to this new transport route, Lenzing is able to meet the urgent demand of its Chinese customers twice as quickly as by the usual sea freight.

  • The Lenzing Group was the first Austrian company to send goods 100 percent “Made in Austria” by train directly to China.
  • The train loaded with TENCEL™ fibers reached Xinzhu station in Xi'an on September 05.

Xi’an, China – The Lenzing Group is breaking new ground due to the short-term increase in demand for sustainably produced fibers from Chinese customers. For the first time, the company delivered wood-based cellulosic fibers, which are produced at the Austrian sites in Lenzing and Heiligenkreuz, directly to China by train. Thanks to this new transport route, Lenzing is able to meet the urgent demand of its Chinese customers twice as quickly as by the usual sea freight.

The first complete train with goods 100 percent “Made in Austria” started on August 20 in the presence of Leonore Gewessler, Federal Minister for Climate Action, Environment, Energy, Mobility, Innovation and Technology, His Excellency Xiaosi Li, Ambassador of the People's Republic of China in Austria, Stefan Doboczky, Chief Executive Officer of the Lenzing Group, Thomas Kargl, Board Member of the ÖBB Rail Cargo Group, Erwin Cootjans, Chief Executive Officer of Nunner Logistics, and Erich Hampel, Chairman of the Board of the B&C Private Foundation, at the Vienna South Terminal and reached his destination on September 05 at the Xinzhu train station in Xi'an, China. The train loaded with 41 containers with TENCEL™ branded lyocell and modal fibers and a total value of EUR 1.8 mn, passed a total of 10,460 km in seven countries: Austria, the Czech Republic, Poland, Belarus, Russia, Kazakhstan and China.

The first Lenzing fiber train was received in a grand ceremony on Tuesday, September 08 at the container terminal in Xi'an. Numerous guests, including the Austrian ambassador to China, Friedrich Stift, representatives of the Xi'an Municipal Government, the China Railway Xi'an Group, the Xi'an International Trade & Logistics Park as well as representatives of the Lenzing Group, the China National Textile and Apparel Council, Lenzing customers and the media attended the ceremony.

In his speech, Friedrich Stift, Austrian ambassador to China, emphasizes the importance of international trade and sustainable development: “The delivery of Austrian-made products through the CHINA RAILWAY Express adheres to the sustainable concept of Lenzing. Since China and Austria signed the bilateral railway cooperation agreement in 1994, the two countries have maintained good cooperation in the railway field and will continue to do so in the future. China is Austria's largest partner in Asia, and it is believed that after the outbreak of the corona crisis bilateral trade will normalize in 2021.”

“This is the first time for the Lenzing Group to deliver Austrian-made TENCEL™ branded fibers directly to Chinese customers. The Silk Road has been a main transport route between Europe and Asia since ancient times. Chinese consumers affectionately call TENCEL™ fibers ‘Silk from Heaven’. The China-Europe Express can reduce the transport time between Europe and China by half, thus meeting Chinese customer’s demand for environmentally friendly fibers more quickly”, states Hu Jian, Senior Vice President of the Lenzing Group for North Asia.

10,460 kilometers: First direct complete train with Austrian TENCEL™ branded fibers from Vienna to China (c) Lenzing Aktiengesellschaft
Departure ceremony with Federal Minister Leonore Gewessler
20.08.2020

10,460 kilometers: First direct complete train with Austrian TENCEL™ branded fibers from Vienna to China

  • Due to the short-term increase in demand from Chinese customers, Lenzing AG is breaking new ground. For the first time in the history of Austria, a local company is sending goods that are 100 percent produced in Austria directly to China by train.

Vienna – The Lenzing Group stands for the ecologically responsible production of specialty fibers made from the renewable raw material wood. Due to the high demand from Chinese brands and retailers for sustainably produced fibers, Lenzing delivers fibers from the two Austrian production sites Lenzing and Heiligenkreuz directly to customers in China by train for the first time.

  • Due to the short-term increase in demand from Chinese customers, Lenzing AG is breaking new ground. For the first time in the history of Austria, a local company is sending goods that are 100 percent produced in Austria directly to China by train.

Vienna – The Lenzing Group stands for the ecologically responsible production of specialty fibers made from the renewable raw material wood. Due to the high demand from Chinese brands and retailers for sustainably produced fibers, Lenzing delivers fibers from the two Austrian production sites Lenzing and Heiligenkreuz directly to customers in China by train for the first time.

Austria's first complete train with goods exclusively “Made in Austria” will leave the Vienna South Terminal towards China on August 20, 2020 at 11 am. The train is loaded with Lenzing fibers and provided by NUNNER Logistics. In strict compliance with the COVID-19 protective measures, Leonore Gewessler, Federal Minister for Climate Action, Environment, Energy, Mobility, Innovation and Technology, His Excellency Xiaosi Li, Ambassador of the People's Republic of China in Austria, Stefan Doboczky, CEO of the Lenzing Group, Thomas Kargl, Board Member of the ÖBB Rail Cargo Group, Erwin Cootjans, CEO Nunner Logistics and Erich Hampel, Chairman of the Board of the B&C Private Foundation, took part in the departure ceremony.

The train, which started at Vienna, brings 41 containers with TENCEL™ branded Lyocell and Modal fibers with a total value of EUR 1.8 million directly to customers in China. On its 16-day trip to Shanghai, the train covers a total of 10,460 kilometers and passes seven countries: Austria, the Czech Republic, Poland, Belarus, Russia, Kazakhstan and China. “With this new transport route, we can meet the high demand from our customers for sustainably produced fibers more quickly. Thanks to train transport, the urgently needed fibers arrive at our customers in China twice as quickly as by sea freight,” says Stefan Doboczky, CEO of the Lenzing Group. Lenzing has had very good experiences with rail transport for a long time when it comes to delivering the renewable raw material wood to its plants. Almost 70 percent of the wood processed at the Lenzing site is already delivered by rail. “Our declared goal is to shift more freight traffic to rail. Rail is the only way to combine climate goals and economic interests and thus transport growth. That is why we are happy to be part of this unique project for our long-standing customer,” says Thomas Kargl, Board Member of the ÖBB Rail Cargo Group. “Transporting goods by rail to China is possible. And this train from Vienna to China is an integral part of climate protection. Because we want to support the shift from road to rail, especially in freight transport. Today's train is the first step – I am convinced this train will set an example”, says Leonore Gewessler, Federal Minister for Climate Action, Environment, Energy, Mobility, Innovation and Technology.

Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group
Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group
21.02.2020

Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Stephan Sielaff is a chemical engineer who gained experience in the chemical industry in the years 1993 to 2014, holding various management positions for Unilever and Symrise. Since 2014, he has worked for the Swiss specialty chemicals company Archroma, an important supplier of the textile and paper industry, as a Member of the Board of Directors and Chief Operating Officer (COO).He has been responsible for forming the integrated operational structure and the strategic development of the company.

Christian Skilich, who will assume management responsibility for the new Pulp and Wood Raw Materials Division in the Lenzing Group, boasts outstanding expertise in the field of paper and pulp technology. With a Master of Science in Paper Technology and Engineering & Economics, he first held various positions in the paper, packaging and glass industries. Since 2004, he has worked in a broad range of management areas on behalf of the internationally operating Mondi Group. Christian Skilich most recently served as Chief Operating Officer on Mondi’s Board of Directors, overseeing projects in the USA and Europe.

More information:
Lenzing AG
Source:

Lenzing AG

DOMO Chemicals appoints Yves Bonte as CEO (c) DOMO Chemicals
DOMO Chemicals appoints Yves Bonte as CEO
21.01.2020

DOMO Chemicals appoints Yves Bonte as CEO

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

Gregory De Clerck, Managing Director of Domo Investment Group and Member of the Board of DOMO Chemicals commented, “I would personally like to thank Alex for his leadership in the successful growth and transformation of DOMO from an upstream nylon 6 specialist into a full integrated engineering materials company developing innovative and sustainable solutions in the Polyamide Industry. We are excited to welcome Yves Bonte to DOMO as the new CEO and Chairman of DOMO Chemicals. We believe he is the ideal person to lead the next chapter of the Company’s growth and transformation process. Alex will continue to significantly contribute to the success of new DOMO.”

Yves Bonte joins DOMO from Yara, the leading fertilizer company and a provider of environmental solutions where he held the role of Executive Vice President Industrial recently named New Business since January 2010, and was responsible for a business generating appr. 20% of Yara’s total revenue of 12.9 billion USD. Prior to Yara, he held a variety of business leadership, commercial and operations roles at Lyondell Basel and Exxon Chemicals. Since 2018 Yves is as Board Member of DOMO.

“I have a true passion for innovation and sustainability, and I am thrilled to join DOMO as its next CEO,” Yves Bonte commented. “The Company has established itself as a leader in sustainable polyamide based on its strong technology-driven product portfolio with a solid foundation to further build upon. I believe DOMO is uniquely positioned to support its customers’ manufacturing processes in a cost effective and sustainable manner. The recently announced long-term strategy and planned investment will position DOMO to reach new levels of growth and success.”

More information:
DOMO Chemicals
Source:

Marketing Solutions NV

02.08.2019

NCTO Board Member Kathie Leonard Named to Ex-Im Bank Advisory Committeeisory Committee

NCTO Board member and President and CEO of Auburn Manufacturing Inc. Kathie Leonard was appointed to serve as the U.S. textile industry representative on the Export-Import Bank (Ex-Im) 2019 Advisory Committee.

Auburn Manufacturing Inc. is a woman-owned manufacturer based in Mechanic Falls, Maine, producing heat-and fire-resistant textiles used worldwide by industries like ship building/repair, foundries, mining, aerospace, power generation and many other heat-intensive industries.

Leonard started the company in 1979 and over the past 40 years has worked tirelessly to build Auburn Manufacturing into a leader in its field, turning 1.5 million pounds of fiber per year into over 2 million yards of fabric.

NCTO Board member and President and CEO of Auburn Manufacturing Inc. Kathie Leonard was appointed to serve as the U.S. textile industry representative on the Export-Import Bank (Ex-Im) 2019 Advisory Committee.

Auburn Manufacturing Inc. is a woman-owned manufacturer based in Mechanic Falls, Maine, producing heat-and fire-resistant textiles used worldwide by industries like ship building/repair, foundries, mining, aerospace, power generation and many other heat-intensive industries.

Leonard started the company in 1979 and over the past 40 years has worked tirelessly to build Auburn Manufacturing into a leader in its field, turning 1.5 million pounds of fiber per year into over 2 million yards of fabric.

More information:
NCTO
Source:

National Council of Textile Organizations

17.04.2019

Lenzing’s Annual General Meeting resolves an unchanged dividend and special dividend

This year’s Annual General Meeting of Lenzing AG resolved today, Thursday, April 17, 2019, to distribute a dividend of EUR 3.00 per share as well as a special dividend totaling EUR 2.00 per share. On balance, the dividend will amount to EUR 5.00 per no-par value share for the 2018 financial year (compared to EUR 5.00 per share in the previous year). The dividend payment is scheduled to take place on April 25, 2019, whereas ex-dividend day is on April 23, 2019.

The Annual General Meeting also adopted a resolution discharging the members of the Management Board and the Supervisory Board for the 2018 financial year, and also resolved upon the remuneration to be paid to the Supervisory Board members for the 2018 and 2019 financial years. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual and consolidated financial statements for the 2019 financial year.

This year’s Annual General Meeting of Lenzing AG resolved today, Thursday, April 17, 2019, to distribute a dividend of EUR 3.00 per share as well as a special dividend totaling EUR 2.00 per share. On balance, the dividend will amount to EUR 5.00 per no-par value share for the 2018 financial year (compared to EUR 5.00 per share in the previous year). The dividend payment is scheduled to take place on April 25, 2019, whereas ex-dividend day is on April 23, 2019.

The Annual General Meeting also adopted a resolution discharging the members of the Management Board and the Supervisory Board for the 2018 financial year, and also resolved upon the remuneration to be paid to the Supervisory Board members for the 2018 and 2019 financial years. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual and consolidated financial statements for the 2019 financial year.

Effective at the end of this Annual General Meeting, Hanno Bästlein, the previous Chairman of the Supervisory Board, as well as Christoph Kollatz have retired from the Supervisory Board at their own request. “We would like to thank Hanno Bästlein and Christoph Kollatz for their dedicated work on the Supervisory Board of Lenzing AG. Thanks to their expertise, they made a major contribution to important strategic decisions in the company. During his four years as Chairman of the Supervisory Board, Hanno Bästlein decisively supported the strategy of the Lenzing Group and thus contributed to the enhanced resilience of the company based on the expansion with specialty fibers”, says Stefan Doboczky, Chief Executive Officer of Lenzing AG.

Source:

Lenzing AG