From the Sector

The consortium of Teijin Limited, Fukui Tateami Co., Ltd., and Osaka Medical and Pharmaceutical University announced that a novel surgical patch, under the brand name SYNFOLIUM®, will be released for manufacturing and distribution by Teijin Medical Technologies Co., Ltd. on June 12, 2024.

SYNFOLIUM® is a surgical patch with knitted fabric consisting of both bio-absorbable and non-absorbable yarns, which are coated with cross-linked gelatin. After the patch is surgically implanted in the body, the patient’s tissue grows and gradually surrounds the expandable, non-absorbable portion, while the bio-absorbable portion degrades. The regenerated tissue has the potential to reduce the risk of inflammatory reactions, foreign body reactions and cell death, which often cause deterioration of the implants.

This new product is designed to be used in surgical treatment of patients with congenital heart disease (CHD). The prevalence of CHD is 1 in 100 people globally, and in Japan, it is estimated that approximately 10,000 neonates are born with the disease each year. Newborns and infants with CHD generally undergo surgeries to correct hemodynamic problems due to septal defects or narrowed blood vessels (stenosis) by implanting a medical patch, usually made from synthetic or animal-derived materials. However, over a long period after surgery, a considerable number of patients eventually require re-interventions, such as repeat surgery or catheter therapy, due to the deterioration of the implanted patch. This deterioration can be caused by an immune-mediated foreign body reaction or the development of stenosis due to the inability of the patch to stretch in response to the growth of cardiac and vascular tissue.

To address this clinical problem, Shintaro Nemoto, M.D., Ph.D., of Osaka Medical and Pharmaceutical University, created an idea for a patch that could accommodate the growth of patients’ bodies through restoration by the patient’s own tissues. In 2012, he began research and exploration to make this idea a reality.

Fukui Tateami, a pioneer in warp-knitting technology based in Fukui Prefecture, turned Dr. Nemoto’s idea into the novel concept of an expandable cardiovascular patch. Based on advanced warp knitting technology it developed over the 80 years since its founding, the company created a special knitted fabric structure to accommodate tissue regeneration.

Teijin developed the technology to coat knitted fabric with gelatin, which can prevent blood leakage and can be replaced by the patient’s own tissue. The company has been proceeding with design and development, clinical trials, establishment of a commercial production system, and application for manufacturing and marketing approval in Japan.

The development of SYNFOLIUM® has been supported by the Ministry of Economy, Trade and Industry since 2014, as well as by a program launched in 2017 by the Japan Agency for Medical Research and Development (AMED) to facilitate collaboration between medical academia and industry. Japan’s Ministry of Health, Labor and Welfare designated SYNFOLIUM® as a “SAKIGAKE” device in April 2018, providing various incentives to speed up approval for clinical use. In addition, the Japanese Society of Pediatric Cardiology and Cardiac Surgery cooperated by assisting with clinical trials and providing advice on creating guidelines for appropriate use.

Clinical trials that began in 2019 were completed in 2022, and Teijin Medical Technologies applied for manufacturing and sales approval to the Ministry of Health, Labor and Welfare in January 2023. The company received approval in July of the same year.

Going forward, Teijin and Teijin Medical Technologies, Fukui Tateami, and Osaka Medical and Pharmaceutical University will provide clinical information about this product to medical institutions to facilitate its use in patients with CHD. Teijin and Teijin Medical Technologies will continue to collect and analyze cases using SYNFOLIUM® to establish its long-term safety and efficacy.

Furthermore, to help improve the quality of life of patients with CHD around the world, the consortium plans to market SYNFOLIUM® overseas by working to gain manufacturing and marketing approval in the United States, the European Union and other countries.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the ITM 2024 International Textile Machinery Exhibition in Istanbul, Türkiye from 4th to 8th June 2024 with a full product lineup.

WHOLEGARMENT® knitting has recently gained heavy interest from the apparel industry due to the shrinking workforce of skilled sewing and linking personnel, as well as for its sustainable benefits by requiring the minimum amount of material to produce one item at a time. SHIMA SEIKI intends to gain even more interest with its new SWG-XR® flagship machine. SWG-XR® features the company's original SlideNeedle™on 4 needle beds for high quality production of WHOLEGARMENT® products using all needles, in addition to a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit before, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at ITM will be shown in 15L. The MACH2®XS WHOLEGARMENT® knitting machine, also with original SlideNeedle™ on four needle beds, will be shown in 8L. Other WHOLEGARMENT® knitting machines include the MACH2®VS V-bed machine for producing WHOLEGARMENT® items using every other needle, shown in 8 and 18 gauges, as well as the compact SWG®091N2 for producing smaller WHOLEGARMENT® items and accessories, to be shown in 10 gauge. An economical proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 machine in 24 gauge.

SHIMA SEIKI’s technology in computerized shaped knitting is represented by its N.SVR®122 computerized flat knitting machine in 14 gauge, and features such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Also on display will be the SCG®122SN coarse gauge machine in 3 gauge. Automatic seamless glove knitting machines will also be present, including the SFG®20 21-gauge machine, and SFG®-I in 10 gauge.

On the software side, demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system and APEXFiz® subscription-based design software. Each provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way the design evaluation process is improved with ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz® help to digitally transform the fashion supply chain for realizing sustainable manufacturing. SHIMA KnitManager™ knit production management software will also be shown to demonstrate solutions for maximizing productivity through monitoring of machine status and production progress.

ITM, to be held in Istanbul at the beginning of June, will once again see a strong participation of VDMA member companies. Almost 90 exhibitors from Germany will exhibit at the trade fair, most of whom are members of the VDMA. In addition to the VDMA member companies exhibiting with their own booth, numerous VDMA members will be represented in Istanbul via agents. They cover nearly all different machinery chapters with a focus on spinning, nonwovens, weaving, knitting, warp knitting and finishing.

In Istanbul, the VDMA members will show their latest innovations. In technological terms, significant trends are digitalisation and automation. These themes have been present for some time but will continue to play a central role in meeting the challenges for many years to come. Another trend that has also been around for a while is sustainability. Today it is much more than a buzzword: Efficiency in energy, raw materials or water as well as recycling are not feel-good issues but have a real economic and social background.

For the textile machinery manufacturers organised in the VDMA, Turkey is a major trading partner. In 2023, textile machinery and accessories worth approximately 350 million euros were exported from Germany to Turkey, which made Turkey the second biggest sales market for German companies. After three years in which China was the most important supplier of textile machinery to Turkey, Germany has now regained this top position.

Turkey is at the doorstep of Europe, which gives Turkish textile producers a powerful geographic advantage over Asian sourcing destinations. The textile companies in the region have a deep experience and know-how in making the highest quality textile and apparel for leading markets of Europe and employs a young, dynamic, and well-educated workforce.

But ITM is not just a place for visitors from Turkey, as Dr. Harald Weber, Managing Director of the VDMA Textile Machinery Association explains: “It should not be forgotten that ITM not only attracts visitors from Turkey, but also from the Middle East, Central Asia and North Africa. Turkey's proximity to the European Union and its fully integrated textile value chain also make it interesting in terms of the EU's strategy for sustainable and circular textiles and the increasing importance of recycling in the future.”

The Trevira CS brand is celebrating its debut at Clerkenwell Design Week (CDW), which takes place in London from May 21-23 2024. The brand is particularly targeting interior architects, interior designers, and contract furnishers to present its innovations on sustainability. Trevira CS stands for flame retardant fabrics that have been tested for fire safety. They also offer numerous sustainable properties.

The London borough of Clerkenwell is home to more creative businesses and architects per square mile than anywhere else in the world, making it one of the most important design hubs in the world. To celebrate this rich and diverse community, Clerkenwell Design Week has created a unique opportunity to showcase the world's leading interior design brands. With more than 600 events in over 160 showrooms, more than 11 curated exhibitions, stunning installations, talks and a supporting program, CDW has established itself as the UK's leading design festival. The Trevira CS stand is part of the "German Collection - home to German Contemporary Design", which brings together a leading selection of renowned German brands.
 
The product range of flame-retardant Trevira® filament yarns now also includes 30 spun-dyed, UV-stable yarns, which are particularly suitable for outdoor use in fabrics in the hospitality sector and on cruise ships due to their high light fastness and UV resistance. They also score points for their sustainable properties, as the fabrics made from them can be produced in a more environmentally friendly way than textiles made from conventional yarns.

Trevira CS fabrics are also available in recycled versions. They consist of fiber and filament yarns that are obtained in various recycling processes. Fabrics made from these yarns can obtain the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%.

The demand for water in Germany is increasing and used water is not being utilized sufficiently. Graywater in particular, i.e. wastewater from showers, bathtubs and washbasins, offers great potential for further use. It can be brought to service water quality on site and reused for flushing toilets or watering gardens, for example. Thanks to flexible 3D textiles, it can even be used in almost any building to save space.

Around 50 to 80 percent of all domestic wastewater is graywater. Until now, large containers and tanks have been needed to reprocess it and return it to the cycle, taking up a lot of space in the building. The German Institutes of Textile and Fiber Research Denkendorf (DITF) and their project partner ARIS have developed a biological, textile-based system.

It is based on a 3D spacer fabric made of highly durable polypropylene. Its advantage is that it can be installed flat and is therefore extremely space-saving. Thanks to its special system geometry, it can be installed in places that would otherwise remain unused - for example in a new building under the floor of an underground garage, on a flat roof or in the garden. It can be modularly adapted to the water requirements and structural conditions in the respective buildings. "Even vertical solutions on facades are conceivable," explains DITF scientist Jamal Sarsour. This means that the graywater treatment system could be used in densely built-up cities in particular.

The system developed by the project partners requires little maintenance and is therefore particularly cost-effective. Compared to previous solutions, it is characterized by a long lifespan. It therefore contributes to sustainable water use and makes a valuable contribution to the circular economy.

ARIS plans to launch the new textile-based graywater treatment system on the market in 2024.

The project will be presented on June 13, 2024 at the SME Innovation Day of the Federal Ministry for Economic Affairs and Climate Protection in Berlin.

The research project with the number 16KN080829 of AiF Projekt GmbH, Berlin, was funded by the Federal Ministry of Economics and Climate Protection as part of the Central Innovation Program for SMEs (ZIM) on the basis of a resolution of the German Bundestag.

Texworld Apparel Sourcing Paris opens its doors from 1 to 3 July at Paris Expo Porte de Versailles. More than a thousand exhibitors from the world's major sourcing countries will be offering inspirational sources for building collections for 2025-2026. This season's show will focus on suppliers of innovative products and solutions for high-performance and sustainable fashion.

Yarn in the spotlight
Taking us further upstream in the industry and for the first time at the Parisian trade shows, a pavilion featuring yarn producers will be found at the exhibition. Co-organised with Yarn Expo, a Shanghai show in the Messe Frankfurt galaxy, this dedicated pavilion will feature companies from China, India, Pakistan and Taiwan.

A Leather trends area at Leatherworld, partnerships at Avantex
As in previous summers, this season’s show will bring together all the different aspects of Texworld Apparel Sourcing Paris. Leatherworld, the platform dedicated to leather sourcing, is announcing the return of a South African pavilion. This area will also host a Leather Trends area created and run by Italian publisher Edizioni AF, a specialist in the leather industry. Particular attention will be paid to the design processes and choice of materials used by Italian accessories and footwear manufacturers.

A number of new features are also expected in the Avantex innovations area: Partnerships with the IFA Paris fashion design school, the TCBL association and the TUV Rheinland certification body, which will showcase  solutions in sustainable fashion and textiles, and provide an opportunity to discuss these issues at expert round tables.

Furthermore, the fair will be showcasing Texpertise Econogy, the sustainable economy approach developed by the international Messe Frankfurt group to guide visitors in their sourcing choices. Following its launch in February, the upcoming event will continue to promote sustainability with a number of features and provide a platform for green pioneers.

TradeBeyond has announced an advancement in its traceability solution through the integration of artificial intelligence. This upgrade allows global brands and retailers to improve visibility and reduce risks in their supply chains.

TradeBeyond's latest platform enhancements incorporate artificial intelligence to automate documentary verification and document chain of custody. These improvements bolster efficiency, security, and reliability. Advanced AI verifies the authenticity and integrity of products, tracing their journey from raw materials to production and delivery in compliance with increasing ESG regulations and standards.

TradeBeyond’s enhanced traceability solution leverages AI to automatically scan all documents, including orders, invoices, bills of lading, and shipping advices. It compiles the chain of custody documentation and checks critical product and shipment documents against multiple databases of blacklisted entities for potential compliance risks. The AI also identifies gaps or missing documentation, alerting businesses and suppliers for resolution before shipping.

Recent global supply chain due diligence laws, including the Uyghur Forced Labor Prevention Act and others, have placed stringent requirements on brands and retailers to provide their goods' chain of custody. TradeBeyond’s AI simplifies compliance with these laws, while increasing the data accuracy, visibility, and transparency necessary for sustainable sourcing.

The next AACHEN-DRESDEN-DENKENDORF INTERNATIONAL TEXTILE CONFERENCE will take place on November 21/22 2024 in Stuttgart on site.  

You are invited to submit abstracts for oral or poster presentations related to the following topics:

• Textile Mechanical Engineering
• Biobased Fibers
• High Performance Fibers
• Fiber Composites and Lightweight Construction
• Circular Economy and Recycling
• Medicine and Health
• Functionalization and Finishing
• Transfer Session “From Idea to Practice”

 
Deadline abstract submission for oral presentations: April 30, 2024
Deadline abstract submission for poster presentations: September 30, 2024

Partner countries for 2024 are Belgium, Netherlands and Luxembourg.

Stahl has published its 2023 Environmental, Social and Governance (ESG) Report. The report outlines Stahl's recent progress on its ESG Roadmap to 2030 and the steps the company is taking to live its purpose of Touching lives, for a better world.

Stahl’s ESG Roadmap to 2030 includes interim targets for 2023, making this a year in which Stahl reached several important milestones. For example, the company reduced its scope 1 and 2 greenhouse gas (GHG) emissions by 22% versus 2022. Furthermore, in 2023 the Science Based Targets initiative (SBTi) validated Stahl's scope 1, 2 and 3 targets, making it one of the first coatings companies on the SBTi-approved list.

To reduce its GHG emissions, Stahl is actively increasing its use of clean energy. At the end of 2023, renewable energy generation, such as solar panels, had been installed at four Stahl sites, compared to its target of three.

Measuring – and reducing – the impact of products is an important step in the company’s scope 3 emissions. As such, 353 Stahl products now have either life cycle assessment (LCA) or product carbon footprint (PCF) data, far exceeding the 2023 target of 50.
 
New ratings and certifications
In 2023, 2,161 of Stahl's products were certified by Zero Discharge of Hazardous Chemicals (ZDHC), in line with ZDHC MRSL V3.1. These products represented 70% of the company’s sales revenue, demonstrating increased demand for coatings with a lower risk to health and the environment.

Stahl was also proud to achieve a Platinum rating from EcoVadis for the second year in a row, which places it in the top 1% of companies evaluated. Stahl also exceeded its 2023 target of an average EcoVadis rating of at least 60/100 for their top ten suppliers, with an average rating of 68/100 reported in December 2023.
Fostering a safe and welcoming work environment

A core pillar of Stahl’s ESG approach is how it supports its employees’ physical and mental well-being. The 2023 ESG Report outlines several examples of this commitment, such as improvement in its key safety KPIs for the third year in a row.

Besides keeping people safe, Stahl continues to make progress in fostering an open and inclusive workplace. For example, in support of diversity, equity and inclusion (DEI), Stahl appointed its first female leadership team member, trained 98% of its staff in DEI and established DEI committees at all Stahl sites. In addition, to strengthen communication, engagement and collaboration across the workforce, Stahl also established an internal workplace hub, MyStahl.

Quickly becoming the benchmark for sustainability, circularity presents a simple solution for many of the world’s complex waste issues. However, in a quickly changing textile marketplace with increasing regulatory pressures, designing circular products can be anything but simple.

To help demystify this accelerating paradigm shift, the Designing for Circularity panel is coming to Portland’s Functional Fabric Fair, where expert panelists will inform and inspire the next generation of product designers and developers.

Scheduled for Wednesday, April 17th at 2:00pm and hosted by textile industry communications agency Formidable Media, the Designing for Circularity panel will bring together experts in materials sourcing, textile finishes, trims, sustainability, recycling, natural materials, and more, to help designers, product developers, and brand representatives make the choices needed to become leaders in the future of sustainable products.

“Fashion is regularly listed among the top five largest polluting industries in the world and our panel of experts hope to  help shape future design and sustainability decisions to mitigate fashion’s outsized impact on the environment,” said Scott Kaier, Founder and President of Formidable Media. “Informed and innovative design is the first step in creating circular products, so today’s designers will be instrumental in creating a cleaner, more sustainable future.”

Hand-picked from across the outdoor, fashion, lifestyle, and footwear industries, the Designing for Circularity panelists include:

• Daniel Uretsky, President, ALLIED Feather + Down
• Martin Flora, VP of Business Development, Green Theme Technologies
• Sarah Schlinger, R&D Commercialization Manager, Woolmark
• Sharon Perez, Senior Business Development Manager, Lenzing Group
• Brian La Plante, Senior Manager of Sustainability, YKK
• Theresa McKenney Director of Sustainability, NEMO Equipment