From the Sector

Reset
18 results
Monforts denim mills move hemp into the mainstream © Cone Denim
Cone Denim Sweet Leaf jeans.
30.06.2020

Monforts denim mills move hemp into the mainstream

  • There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
  • While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

  • There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
  • While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

“Hemp has a unique colour and adds a different cast to our indigo, the drape and texture of the fabrics is different and it even adds  a bit of a unique hand, so combined with its sustainable credentials we are proud to be bringing the Sweet Leaf collection to the market.”

US supply chain

Cone is currently sourcing its hemp from France, but with much of its manufacturing now in Mexico – and with the introduction of the US Farm Bill in 2018 which has legalised the growing of legal hemp – is exploring the possibility of investing in the US supply chain.

“With US hemp we’re really at the R&D phase,” Little emphasises. “It’s a unique crop, so coming up with the right stalk to provide the right fibre is challenging. We’ve experimented with different types of seed and various methods of decortication.”

Decortication, he explains, is the mechanical removal of the outside layer of the hemp stalk to useable fibre on the inside. A second process, cottonization, is necessary to make the fibre suitable for spinning, because compared to cotton, hemp is longer, stiffer, and less flexible.

100% success

At the end of 2019, Naveena (NDM), headquartered in Karachi, introduced fabrics featuring up to 51% hemp content in blends with Tencel and recycled polyester and this year has developed the first 100% hemp denims.

“The response to the fabrics we showed last year was incredible and we were looking forward to the response to this latest development – which everyone was asking for – at the Kingpins show in Amsterdam, which unfortunately was unable to go ahead,” says NDM’s Director of Marketing Rashid Iqbal. “We produced initial samples in an undyed state because we were not sure how the wet spun yarn would react in the dyeing, but I’m happy to say we have had success in this respect and are now able to provide one hundred per cent indigo dyed hemp denim.”

Environmental benefits

“Differentiation is the key in the highly-competitive denim industry and we have assisted our customers with trials and optimised processing parameters for a range of different fibres, including hemp, both at our Advanced Technology Centre in Germany and at their own mills around the world,” says Hans Wroblowski, Monforts Head of Denim. “Given the environmental benefits of hemp, and the liberalisation of its cultivation in many parts of the world, the interest in it now comes as no surprise. We have the technologies and know-how to help our customers to fully maximise their hemp denims at all post-weaving stages of production.”

Monforts has a dominant position in the field of denim finishing with its well proven Montex stenters. It has been enjoying further recent success with its Eco Line concept based on two key technology advances – the Eco Applicator and the Thermo Stretch.

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing.

The CYD system also integrates new functions and processes into the weaving preparation processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre.

Logo monforts
Logo monforts
21.04.2020

Monforts: Industrial-scale testing for new PPE finishes

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

In the current fight against Covid-19, a number of formulators of textile finishing chemicals have rushed out new antiviral and antimicrobial treatments intended for PPE (personal protective equipment) such as face masks and medical gowns and drapes.

These finishing chemicals have naturally already been thoroughly tested in laboratories and their effectiveness verified at laboratory or pilot scale. However, they are new to many manufacturers of textiles and nonwovens now preparing to use them on an industrial level.

A lot of companies changed, due to the current situation their usual manufacturing programmes to the production of PPE items. “We have experts on hand at our operational Advanced Technology Centre (ATC) here in Germany, to help any of our customers to rapidly transition to new finishing techniques and treatments they may not be familiar with, and to run trials on their behalf, should they require this assistance.”, states the vice president of Monforts, Klaus Heinrichs.

The three lines at the ATC situated at the Monforts HQ in Mönchengladbach, are of a true industrial scale and trialling new products on them goes beyond lab or pilot plant testing to rapidly identify any problems that might occur once full production is underway.

 

More information:
Monforts corona virus
Source:

AWOL Media

Logo monforts
Logo monforts
09.03.2020

Monforts ATC adventures in aquaculture

Monforts has recently been involved in a number of R&D trials aimed at improving the performance of the fishing cage nets employed in fish farming operations at its Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

The cultivation of both freshwater and saltwater fish populations under controlled conditions is a global industry valued at around $200 billion annually and only made possible with the use of huge aquaculture nets.

Monforts has recently been involved in a number of R&D trials aimed at improving the performance of the fishing cage nets employed in fish farming operations at its Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

The cultivation of both freshwater and saltwater fish populations under controlled conditions is a global industry valued at around $200 billion annually and only made possible with the use of huge aquaculture nets.

Biofouling
“These nets are very prone to biofouling and to avoid its negative impacts, high-pressure robotic jets are now used to clean them,” explains Monforts Head of Technical Textiles Jürgen Hanel. “Net cleaning is expensive and can also damage current antifouling coatings on the nets, causing contamination as well as fish health and welfare risks.
The development of more effective antifouling coatings for fishing cage nets has been one aspect of R&D work at the Monforts ATC, while the use of how alternative fibres could potentially be coated or finished to replace the polyamide which is currently most widely used has also been explored.
The issue of plastics and synthetic fibres in the oceans has generated global media attention recently, and the aquaculture industry is exploring all avenues that will lead to more sustainable practices.

Expansions
Since its opening in 2013, over €3 million has been invested in equipment at the Monforts ATC, which over an area of 1,200 square metres houses two full finishing lines, engineered to accommodate an extremely diverse range of processes, in addition to a Thermex range for the continuous dyeing of denim.

Source:

AWOL Media

The first Platinum Cradle to Cradle Certificate awarded to Rajby Textiles. (c) AWOL Media
The first Platinum Cradle to Cradle Certificate awarded to Rajby Textiles.
12.02.2020

World’s first C2C Platinum for Rajby Textiles

Monforts customer Rajby Textiles is the first company in the world to have finally achieved the Cradle to Cradle (C2C) Platinum Standard for a product. Its Beluga denim fabrics have gained the ultimate sustainability score in all five categories covered by the C2C standard, which is acknowledged as involving the toughest and most thorough testing and assessment it is possible to put a product through.

As such, Beluga denim fabric is based on 100% GOTS certified organic cotton and employs no hazardous chemicals in its production. At the same time, it is both recyclable and biodegradable, with 100% of the energy used in its production offset by green energy and involving a closed loop system with no waste water generated and no material wastage.

The new Beluga denim fabrics, however, represent a new zenith in circular denim production. To meet the active cycling requirement, Rajby has committed to using Beluga denim fabric exclusively in apparel products sold by retailers with take back programmes in place and estimated expected cycling rates for such products

Monforts customer Rajby Textiles is the first company in the world to have finally achieved the Cradle to Cradle (C2C) Platinum Standard for a product. Its Beluga denim fabrics have gained the ultimate sustainability score in all five categories covered by the C2C standard, which is acknowledged as involving the toughest and most thorough testing and assessment it is possible to put a product through.

As such, Beluga denim fabric is based on 100% GOTS certified organic cotton and employs no hazardous chemicals in its production. At the same time, it is both recyclable and biodegradable, with 100% of the energy used in its production offset by green energy and involving a closed loop system with no waste water generated and no material wastage.

The new Beluga denim fabrics, however, represent a new zenith in circular denim production. To meet the active cycling requirement, Rajby has committed to using Beluga denim fabric exclusively in apparel products sold by retailers with take back programmes in place and estimated expected cycling rates for such products

More information:
Rajby C2C
Source:

AWOL Media

(c) A. Monforts Textilmaschinen GmbH & Co. KG
24.01.2020

Talking sustainability with Monforts denim customers

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

While still being synthetic based, CiCLO polyester is able to biodegrade in marine environments, wastewater treatment plants and landfill conditions, at rates similar to natural fibres like wool. 

This more sustainable solution for stretch is also being introduced to China for the first time by another leading denim supplier, Advance Denim.

“Advance Denim is spending its resources on being the most technologically advanced company in China, and also the most sustainable,” says Mark Ix, the company’s Director of Marketing. “We are investing heavily in our manufacturing to save both water and chemicals to create cleaner products.”

Monforts denim customer Berto is a family-owned company with its main denim mill in Bovolenta, a small rural town near to Padua in the north east of Italy, where respect for the environment has always been a must.

“The family has always been focused on respect for the environment,” says Berto’s Marketing Manager Francesca Palento. “In particular, we have a river next to the company from which we take our water for production and we then return it cleaner than it was before. We are also now producing GOTS and Global Recycling Standard jean produced with yarns made from our own internal waste production.”

Pakistan’s Soorty has recently received Cradle to Cradle Gold certification – the most stringent and exacting sustainable standard currently in existence – for its Pure D range of denims. These are produced using the company’s proprietary Zero Waste Water dyeing technology, in combination with the most advanced Monforts finishing machines. 

“Our very latest collection is called Climate Jeans, because every single product we now produce draws attention to the climate emergency we are living through right now,” says Eda Dikman, Soorty’s Marketing Communications Manager. “Sustainability is very important to us because we produce at scale and all of the actions we take reflect on the planet.”

Monforts: Half a century of excellence (c) A. Monforts Textilmaschinen GmbH & Co. KG
Monforts: Half a century of excellence
20.01.2020

Monforts: Half a century of excellence

The origins of both Industry 4.0 and an awareness of the need for more sustainable manufacturing methods can arguably be traced back to the year 1971.

It was in 1971 that the first microprocessor was introduced by Intel, and also that the first and perhaps now most well-known environmental campaigner, Greenpeace, was founded.

As such, a direct line can be charted from that year to today’s automated textile manufacturing machinery concepts, as well as the drive to develop more increasingly resource-efficient processes.

All of the recent innovations which have been introduced to the market by A. Monforts Textilmaschinen GmbH & Co. KG, for example, are being powered by the possibilities of Industry 4.0 and developed in response to the market demand for more sustainable production.

The origins of both Industry 4.0 and an awareness of the need for more sustainable manufacturing methods can arguably be traced back to the year 1971.

It was in 1971 that the first microprocessor was introduced by Intel, and also that the first and perhaps now most well-known environmental campaigner, Greenpeace, was founded.

As such, a direct line can be charted from that year to today’s automated textile manufacturing machinery concepts, as well as the drive to develop more increasingly resource-efficient processes.

All of the recent innovations which have been introduced to the market by A. Monforts Textilmaschinen GmbH & Co. KG, for example, are being powered by the possibilities of Industry 4.0 and developed in response to the market demand for more sustainable production.

They include the new ‘digital twinning’ capability introduced in 2019 for all Monforts machines, with advanced sensor technologies which make it possible to access comprehensive technical machine data from any location using the company’s Smart Support and Smart Check apps. In addition, the digital twin system provides information on individual wear parts, such as, for example, converters or gears.

These latest developments have been very favourably received by Monforts customers, especially in Europe.

50th anniversary
The very first Heimtextil – the leading trade fair for the home textiles market – was also held in Frankfurt in January 1971 and Monforts customers Bierbaum Group and Konrad Hornschuch AG are amongst the German companies who were there from the very start and have attended every annual show since.

Bierbaum Group, based in Borken, is the company behind the well-known Irisette bedding brand and is celebrating its own 125th anniversary in 2020. It has also introduced products bearing the German government’s new Grüner Knopf textile seal of approval for sustainable production.

As a specialist in synthetic leathers for home surfaces, as well as vehicle interiors, Konrad Hornschuch AG, of Weissbach, has been a member of the €44 billion automotive giant Continental AG since 2016.

Representatives from both companies received memorial trophies at a special presentation held on January 7th during the 50th anniversary Heimtextil show.

The home textiles market remains very strong in Germany, with sales amounting to some €9.6 billion in 2019, according to analyst IFH Cologne.

Global growth
The first Heimtextil in 1971 was a significant success, attracting 679 exhibitors from 26 countries.

This year’s show, however, attracted a total of 2,952 exhibitors from 66 countries, reflecting not only the growth of the home textiles industry, but also the globalisation which has taken place over the last half century.

Monforts now has customers for its advanced finishing technologies around the world, with home textile customers from India and Pakistan being particularly well represented at Heimtextil 2020.

Among stand outs from Indian companies at this year’s show was the 2020 collection of Welspun India’s famous Christy England brand, inspired by botanical studies of the gardens of British stately homes. Welspun towels meanwhile benefit from the company’s HygroCotton hollow core yarn technology, produced by a proprietary spinning method which ensures they become softer, fluffier and more absorbent after every wash.

An equally ground-breaking new technology is being introduced by Trident Group, which is one of India’s largest vertically-integrated home textiles manufacturers and two years ago installed five complete Monforts finishing ranges for its new linen department.

Trident’s patented Air Rich yarns feature pores throughout their cross sections for high breathability and absorbency, as well as rapid drying.

Monforts home textile customers from Pakistan stressed the resource efficiency of their processes and products as a result of investments in advanced technology, and during the show the ‘Sustainable Pakistan’ initiative was announced.

Supported by GIZ, the German Society for International Cooperation, the initiative aims to reshape global perceptions of Pakistan’s manufacturers and their innovations. So far, twenty producers have been carefully chosen to be presented on this global platform and will help rebrand Pakistan’s textile industry at the Heimtextil exhibitions going forward.

Heimtextil’s organiser Messe Frankfurt also announced its own new alliance with the United Nations Office for Partnerships, in order to support the UN’s Sustainable Development Goals.

Constancy
Many things have changed since 1971 and home interiors are certainly no longer predominantly orange and brown – and perhaps unlikely to ever become so again.

It’s clear, however, that there has been a constancy in the push to consistently improve textile technologies, processes and products that may have originated in Europe, but have subsequently spread around the world.

And the significance of both microprocessors and sustainability in 2020 could only have been guessed at back in 1971.

 

Monforts ‘Denimized’ customers take the lead in London (c) Monforts Textilmaschinen GmbH & Co. KG
Monforts ‘Denimized’ customers take the lead in London
13.12.2019

Monforts ‘Denimized’ customers take the lead in London

Of the twelve participating denim mills who took part in Habitat 21 – a special Smart Creation showcase at the recent Denim Première Vision exhibition in London – no less than eleven were valued Monforts ‘Denimized’ finishing technology users.

The aim of Habitat 21 was to highlight those companies taking an eco-responsible approach to denim manufacturing via the use of recycled, organic and bio-based fibres, in combination with resource-saving dyeing and finishing technologies. Monforts customers involved in the project were Advance Denim, Berto, Bossa, Calik, Evlox/Tavex, Kilim, Naveena, Orta Anadalou, Rajby Industries, Raymond Uco and Soorty. Their innovations were detailed in a major presentation on trends for the Spring/Summer 2021 season by Manon Mangin of the Première Vision Fashion Team, based on three key themes – Sensation, Hybridisation and Expansion.

Of the twelve participating denim mills who took part in Habitat 21 – a special Smart Creation showcase at the recent Denim Première Vision exhibition in London – no less than eleven were valued Monforts ‘Denimized’ finishing technology users.

The aim of Habitat 21 was to highlight those companies taking an eco-responsible approach to denim manufacturing via the use of recycled, organic and bio-based fibres, in combination with resource-saving dyeing and finishing technologies. Monforts customers involved in the project were Advance Denim, Berto, Bossa, Calik, Evlox/Tavex, Kilim, Naveena, Orta Anadalou, Rajby Industries, Raymond Uco and Soorty. Their innovations were detailed in a major presentation on trends for the Spring/Summer 2021 season by Manon Mangin of the Première Vision Fashion Team, based on three key themes – Sensation, Hybridisation and Expansion.

Monforts at Techtextil India (c) Monforts
A recent Monforts texCoat installation.
20.11.2019

Monforts at Techtextil India

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

As a result, India’s Ministry of Textiles is forecasting that the growth of technical textiles in the country will be over 18% annually in the next few years, from a value of US$16.6 billion in 2018 to US$28.7 billion in 2021.

Value addition

High value-added technical products such as wide-width digital printing substrates, carbon fabrics for high-performance composites, filter media, flame retardant barrier fabrics and heavy-duty membranes are now being coated on Monforts texCoat ranges and finished with the company’s industry-leading Montex stenters.

“Since we acquired the technology that our coating units are based on in 2015, we have made a lot of refinements,” says Hans. “All of these developments are reflected in higher coating accuracy and the resulting quality of the treated fabrics. At the same time, our latest multi-functional coating heads offer an unprecedented range of options, with a wide range of modules available.”

The texCoat user interface is now equipped with the unique Monforts visualisation system and the magnetic doctor blade has greater power reserves. Options include a carbon fibre-reinforced composite coating drum with a more scratch-resistant surface and maximum rigidity and remote control which simplifies exact adjustment for the operator.

Montex stenters in special executions are meanwhile ideal for the drying and finishing of both technical woven fabrics and nonwovens and characterised by high stretching devices in both length and width.

“The European-built Montex range of stenters has earned its leading position in the technical textiles market due to the overall robustness, reliability and economy of these machines,” Hans concludes. “Whatever the intended end-product – and we continue to discover potentially new areas in which technical textiles can be utilised all the time – we have the machine specification and know-how to turn ideas into reality. In India we also benefit from the strong sales and service support of A.T.E. Enterprises.”

Texchtextil India takes place alongside World of Composites at the Bombay Exhibition Centre in Mumbai from November 20-22.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG by AWOL Media.

(c) Monforts Textilmaschinen GmbH & Co. KG
30.09.2019

Monforts in two-centre VDMA delegation to Pakistan

Monforts will be part of the VDMA Textile Machinery Association’s forthcoming delegation to Pakistan which will take place from November 11th to 14th.

In total, 14 companies covering the entire textile chain are participating in the visit, which will showcase the benefits and technological innovations of German textile machinery at seminars held in both Karachi and Lahore.

A technical seminar in Karachi will be held at the Hotel Karachi Avari Towers on November 12th and a second in Lahore will be held on November 14th at the Hotel Avari Lahore Towers.

Monforts will be part of the VDMA Textile Machinery Association’s forthcoming delegation to Pakistan which will take place from November 11th to 14th.

In total, 14 companies covering the entire textile chain are participating in the visit, which will showcase the benefits and technological innovations of German textile machinery at seminars held in both Karachi and Lahore.

A technical seminar in Karachi will be held at the Hotel Karachi Avari Towers on November 12th and a second in Lahore will be held on November 14th at the Hotel Avari Lahore Towers.

“The regions surrounding both of these cities have become major hubs for textile manufacturing, especially in areas such as home textiles and denim, where Monforts enjoys market-leading positions with its finishing systems,” says area sales manager Manfred Havenlith, who in addition to presenting at the seminars, will be holding meetings and networking with existing Monforts customers and potential new ones during the trip. “The Punjab region around Karachi, as Pakistan’s largest city, for example, is now dense with denim manufacturers, many of whom have already expressed keen interest in the new Monforts CYD continuous yarn dyeing system we introduced at ITMA 2019 in Barcelona in June.”

Monforts (c) A. Monforts Textilmaschinen GmbH & Co. KG
02.09.2019

Monforts: Responding to China’s requirements in 2019

It’s well-known that the astonishing success of China’s economy over the past decade has sent wages soaring and made it difficult for the country’s textile manufacturers to find and retain trained machine operators, while operating in a highly competitive market where optimised production and full resource efficiency are of paramount importance.

In direct response to this situation, A. Monforts Textilmaschinen GmbH & Co. KG has introduced a range of new Industry 4.0 technologies aimed at simplifying machine operation while providing easy access to all data and instant or remote assistance.

At the forthcoming Shanghaitex 2019 textile machinery exhibition, which takes place from November 25-28 in Shanghai, Monforts specialists will be at stand A10 in Hall W and look forward to discussing the company’s latest developments in this area with valued Chinese customers.

They include the latest Qualitex full touch panel control system, with its digital twinning capability and Smart Check and Smart Support apps, reinforced by the comprehensive Monforts Smart Sensor machine monitoring programme.

It’s well-known that the astonishing success of China’s economy over the past decade has sent wages soaring and made it difficult for the country’s textile manufacturers to find and retain trained machine operators, while operating in a highly competitive market where optimised production and full resource efficiency are of paramount importance.

In direct response to this situation, A. Monforts Textilmaschinen GmbH & Co. KG has introduced a range of new Industry 4.0 technologies aimed at simplifying machine operation while providing easy access to all data and instant or remote assistance.

At the forthcoming Shanghaitex 2019 textile machinery exhibition, which takes place from November 25-28 in Shanghai, Monforts specialists will be at stand A10 in Hall W and look forward to discussing the company’s latest developments in this area with valued Chinese customers.

They include the latest Qualitex full touch panel control system, with its digital twinning capability and Smart Check and Smart Support apps, reinforced by the comprehensive Monforts Smart Sensor machine monitoring programme.

Monforts (c) A. Monforts Textilmaschinen GmbH & Co. KG
30.07.2019

New Monforts publications chart success in Europe and the denim industry

In addition to launching its new and expanded website, A. Monforts Textilmaschinen GmbH & Co. KG has issued two new publications celebrating the achievements of its major customers.

The first edition of Monforts World of European Textiles profiles a range of companies at the forefront of manufacturing in Europe serving a wide range of end-use markets – from high-end silk and polyamide fabrics for the luxury brands to nonwovens and technical textiles for digital printing, protective clothing, wallcoverings and more.

The seventh edition of Monforts World of Denim meanwhile charts the latest developments from the global market leaders in denim production. Monforts enjoys a global lead in the supply of finishing technology for the denim industry and is currently extremely busy responding to the interest shown at ITMA 2019 in its new CYD yarn dyeing system for this market.

Both publications are now available to download from the new website at: https://www.monforts.de/en/latest-news-media/downloads/

In addition to launching its new and expanded website, A. Monforts Textilmaschinen GmbH & Co. KG has issued two new publications celebrating the achievements of its major customers.

The first edition of Monforts World of European Textiles profiles a range of companies at the forefront of manufacturing in Europe serving a wide range of end-use markets – from high-end silk and polyamide fabrics for the luxury brands to nonwovens and technical textiles for digital printing, protective clothing, wallcoverings and more.

The seventh edition of Monforts World of Denim meanwhile charts the latest developments from the global market leaders in denim production. Monforts enjoys a global lead in the supply of finishing technology for the denim industry and is currently extremely busy responding to the interest shown at ITMA 2019 in its new CYD yarn dyeing system for this market.

Both publications are now available to download from the new website at: https://www.monforts.de/en/latest-news-media/downloads/

 A. Monforts Textilmaschinen GmbH (c) A. Monforts Textilmaschinen GmbH & Co. KG
17.07.2019

CYD is a big hit with ‘Denim Triangle’ visitors at ITMA 2019

The new Monforts yarn dyeing technology is being made commercially available at exactly the right time for fabric differentiation and cost efficiencies, if the initial market reaction at ITMA 2019 is anything to go by.

The new Monforts yarn dyeing technology is being made commercially available at exactly the right time for fabric differentiation and cost efficiencies, if the initial market reaction at ITMA 2019 is anything to go by.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
12.07.2019

Further benefits and savings with the new Monforts MonforClean

A. Monforts Textilmaschinen GmbH & Co. KG presented an energy-optimised new version of its industry-leading Montex stenter for the first time at ITMA 2019 in Barcelona from June 20-26th.

With the introduction of the new MonforClean exhaust air treatment system and other unique process innovations, Monforts has been able to further reduce the energy consumption of Montex stenters by a further 13%.

Exhaust air treatment on stenter frames has posed particular challenges over the years, since the air can contain significant amounts of oil, fibre and even wax particles that may see emissions limits being reached in the processing of certain fabrics, depending on the legal specifications.

In addressing this issue, Monforts is now incorporating the MonforClean module into the stenter frame, so there is no additional space requirement. At the same time, the costs for laborious secondary installations and the piping of the exhaust air treatment components, as well as supporting structures are eliminated due to the machine configuration.

A. Monforts Textilmaschinen GmbH & Co. KG presented an energy-optimised new version of its industry-leading Montex stenter for the first time at ITMA 2019 in Barcelona from June 20-26th.

With the introduction of the new MonforClean exhaust air treatment system and other unique process innovations, Monforts has been able to further reduce the energy consumption of Montex stenters by a further 13%.

Exhaust air treatment on stenter frames has posed particular challenges over the years, since the air can contain significant amounts of oil, fibre and even wax particles that may see emissions limits being reached in the processing of certain fabrics, depending on the legal specifications.

In addressing this issue, Monforts is now incorporating the MonforClean module into the stenter frame, so there is no additional space requirement. At the same time, the costs for laborious secondary installations and the piping of the exhaust air treatment components, as well as supporting structures are eliminated due to the machine configuration.

(c) Monforts Textilmaschinen GmbH & Co. KG
12.07.2019

Monforts: Introduction of CYD multi-colour yarn dyeing system at ITMA 2019

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

Monforts adds to its technological team in Germany (c) Monforts
Jonas Beisel
10.06.2019

Monforts adds to its technological team in Germany

  • Monforts Textilmaschinen GmbH & Co. KG is expanding the team at its Advanced Technology Center (ATC) in Mönchengladbach, Germany, with the appointment of Jonas Beisel as a new textile technologist.

Having studied textile engineering in both Germany and China and taken an internship with Adidas before deciding he wanted to work in a more technical environment, 30-year-old Jonas will be transferring his theoretical knowledge into practice for customers at the ATC and at the plants of Monforts customers around the world.

“I’m really looking forward to meeting everyone at the forthcoming ITMA show in Barcelona as I familiarise myself with the fast-moving environment of the industry,” he said. “It’s good timing for me that ITMA,  which only takes place every four years, is happening now, so soon after my appointment.”

“The Monforts ATC has been extremely busy conducting customer trials and developing new processes recently, so it’s great to welcome Jonas to the technologists’ team,” added Monforts Vice President Klaus Heinrichs.

  • Monforts Textilmaschinen GmbH & Co. KG is expanding the team at its Advanced Technology Center (ATC) in Mönchengladbach, Germany, with the appointment of Jonas Beisel as a new textile technologist.

Having studied textile engineering in both Germany and China and taken an internship with Adidas before deciding he wanted to work in a more technical environment, 30-year-old Jonas will be transferring his theoretical knowledge into practice for customers at the ATC and at the plants of Monforts customers around the world.

“I’m really looking forward to meeting everyone at the forthcoming ITMA show in Barcelona as I familiarise myself with the fast-moving environment of the industry,” he said. “It’s good timing for me that ITMA,  which only takes place every four years, is happening now, so soon after my appointment.”

“The Monforts ATC has been extremely busy conducting customer trials and developing new processes recently, so it’s great to welcome Jonas to the technologists’ team,” added Monforts Vice President Klaus Heinrichs.

More information:
Monforts
Source:

AWOL Media

(c) A. Monforts Textilmaschinen GmbH & Co. KG
21.05.2019

Monforts at ITMA 2019

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

Parts prediction
In addition, the digital twin system provides information on the individual wear parts of a system, such as, for example, converters or gears. “Operators and mill managers are informed by Smart Check sensors when maintenance or the replacement of key components will be required, well ahead of time,” explains Monforts Vice President Klaus A. Heinrichs. “Direct access to the integrated Monforts webshop allows users to instantly order such parts when they are needed, virtually preventing machine downtime.” On request, Monforts can also virtually monitor machine performance and pro-actively alert customers to the need for preventative action. In such cases, however, data is only ever called from the cloud by Monforts when customers have given their full consent, in the interests of data security. Data from Smart Check, for example, can even be used to analyse a system’s energy requirements, allowing machine operation to be optimised by tailoring production runs to the peaks and troughs of electricity costs.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

Jürgen Hanel, Head of Technical Textiles at Monforts. (c) A. Monforts Textilmaschinen GmbH & Co. KG
04.04.2019

Peak performance, whatever the technical fabric…

At next month’s Techtextil 2019 in Frankfurt, Germany, A. Monforts Textilmaschinen GmbH & Co. KG will be highlighting all of the innovative features that have made the Montex stenter the undisputed leader in the field of technical fabric finishing.

“Techtextil is a very important show for us, because technical textiles are a key pillar of our production programme and many of our existing customers will be exhibiting or attending, as well as those we have yet to meet,” says Jürgen Hanel, Head of Technical Textiles at Monforts. “The show provides us with an opportunity to explain the diverse end-products that can be successfully finished on our stenters, as well as with our coating units.”

A number of successful recent Monforts Montex stenter installations in Europe, for example, are dedicated to the production of wide-width digital printing substrates, to high volume automotive fabrics and to heavy duty filter media, to name just three advanced technical materials.

At next month’s Techtextil 2019 in Frankfurt, Germany, A. Monforts Textilmaschinen GmbH & Co. KG will be highlighting all of the innovative features that have made the Montex stenter the undisputed leader in the field of technical fabric finishing.

“Techtextil is a very important show for us, because technical textiles are a key pillar of our production programme and many of our existing customers will be exhibiting or attending, as well as those we have yet to meet,” says Jürgen Hanel, Head of Technical Textiles at Monforts. “The show provides us with an opportunity to explain the diverse end-products that can be successfully finished on our stenters, as well as with our coating units.”

A number of successful recent Monforts Montex stenter installations in Europe, for example, are dedicated to the production of wide-width digital printing substrates, to high volume automotive fabrics and to heavy duty filter media, to name just three advanced technical materials.

Digital print
Three Montex stenters have just been installed at the plant of a leading finisher of substrates for digital printing substrates in Germany – two of them in extra-wide widths of 5.4 metres – for drying after both washing and coating processes.

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded in recent years by the rapid growth in digitally-printed banners and hoardings – often referred to as ‘soft signage’.

“The substrates of choice for digital printing are 100% polyester warp knits which have extremely smooth surfaces,” says Hanel. “This is becoming increasingly critical due to the general move away from PVC coatings which were the standard in the past. Quality inspection and control systems analyse every square metre of fabric to ensure completely uniform and blemish-free production.”

The fabrics produced are resilient and allow excellent take-up of inks for vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for soft signage installers.
These fabrics are being supplied fully finished, in weights of between 50-350gsm and in rolls of up to 600kg or 1,800 metres.

 

VDMA: Regina Brückner New Chairperson of Textile Machinery Association © VDMA
(v.l.n.r.): Chairperson and Vice Chairpersons of the Textile Machinery Association: Regina Brückner, Fritz P. Mayer, Verena Thies.
02.11.2017

VDMA: Regina Brückner New Chairperson of Textile Machinery Association

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

Berlin / Frankfurt am Main, 2 November 2017 – Ms. Regina Brückner, Managing Associate of Brückner Trockentechnik, is the new chairperson of the VDMA Textile Machinery Association. The businesswoman from Leonberg was elected at the members’ meeting of the Association in Berlin. The new executive board is completed with Ms. Verena Thies, Thies Textilmaschinen, and Mr. Fritz P. Mayer, Karl Mayer Textilmaschinenfabrik, who were elected as vice chairpersons.

After her election, Regina Brückner stated: „I am pleased to have Ms. Thies and Mr. Mayer by my side, the two chairpersons who complement each other very well. Mr. Mayer is an entrepreneurial personality with decades of experience which he is meanwhile bringing in as the president of CEMATEX, the European Committee of Textile Machinery Manufacturers.  Ms. Thies assumed responsibility in the family company early on and has been working for the traditional company Thies in international textile machinery business since 2009.”

The new executive board for the legislative period until 2021 is composed of:
Regina Brückner (Chairperson), Brückner Trockentechnik
Verena Thies (Vice Chairperson), Thies
Fritz P. Mayer (Vice Chairman), Karl Mayer Textilmaschinenfabrik
Johann Phillip Dilo, Oskar Dilo Maschinenfabrik
Peter D. Dornier, Lindauer Dornier
Arno Gärtner, Karl Mayer Textilmaschinenfabrik
Roland Hampel, A. Monforts Textilmaschinen
Dr. Janpeter Horn, Herzog
Markus Kleindorp, Memminger-Iro
Martin Küppers, Saurer Schlafhorst
Georg Stausberg, Oerlikon Textile
Andreas Lukas, Andritz Küsters
Benjamin Mayer, Mayer & Cie.     
Eric Schöller, Groz-Beckert
Heinrich Trützschler, Trützschler

Source:

VDMA