From the Sector

Cascale (formerly the Sustainable Apparel Coalition) will host Manufacturer Forum: Shanghai on June 28, part of an annual series of events designed to amplify the voices of manufacturers around the globe. Featuring targeted programming designed to address local challenges faced by manufacturers, the event will highlight solutions provided by Cascale’s Higg Index suite of tools and growing list of impact initiatives. The event takes place at the Shanghai New International Expo Center in collaboration with ISPO Shanghai, the multi-segment summer trade show.

Following successful runs in Bangalore, Dhaka, and Shenzhen, Manufacturer Forum: Shanghai will further facilitate pre-competitive collaboration in order to share best practices and collectively address critical challenges. Keynote speakers include Colin Browne, the organization’s newly-appointed CEO, and Scott Raskin, CEO of Worldly, Cascale’s technology partner and event sponsor.

Reflecting “Catalyst for Change,” the current theme of Cascale’s Manufacturer Forum series, the Shanghai event reinforces the organization’s commitment to support an open exchange between manufacturers and better understand their needs and ongoing challenges to jointly develop solutions.

Over 200 attendees are expected to attend the event, which brings together manufacturers with business leaders and critical stakeholders. Programming will cover a wide range of topics, including what manufacturers need to know about global policy, how strategic partnerships can drive industry change, the evolution of Higg FEM and verification processes, and the latest on decarbonization impacts. To aid goal and target-setting, there will also be dedicated training on setting Science-Based Targets for decarbonization, as part of an evolving and interactive program.

Chargeurs PCC Fashion Technologies has signed a binding agreement to acquire two strategic business units of the Swiss company Cilander, much renowned worldwide for its expertise in the supply of high-end textile fabrics and finishing services for complex textiles used in a wide range of applications.

The project includes the acquisition of the historic factory of the company, Geissbühler, located in Lützelflüh. The factory is a cornerstone of its finishing activities for high-tech textile solutions to address demanding markets such as the military, interior design, sports, and mobility. The site is the legacy of an industrial history that began in 1677, almost 350 years ago. With its Planofil® brand, Cilander markets high-performance textile fabrics for outdoor use, particularly in the nautical world. Cilander also offers a range of finishing options and can tailor-make products to customer specifications.

Under the agreement, CFT PCC also plans to acquire the shirt fabrics business, which mainly comprises the ALUMO brand, founded by Karl Albrecht, joined by Robert Morgen in 1941. For over a century, ALUMO has been at the forefront of offering fabrics made from the finest, highest-quality cotton for men's shirts. The company is the preferred supplier of tailors and specialized luxury brands worldwide, relying on its E-commerce platform.

In addition, Cilander's fabrics business includes the Eugster & Huber brand, aimed at women's fashion brands. The portfolio also comprises Brennet, known for its high-quality fabrics with a contemporary touch, and Swiss Ghutra, a brand specializing in high-end fabrics and headpieces for a clientele in the Middle East.

When completed, this acquisition will strengthen the development capabilities of Chargeurs PCC Fashion Technologies, a leader in interlinings for the garment industry. Thanks to Cilander’s high-tech products and solutions, the business line will open doors to new, particularly demanding niche markets, notably the military market and reinforce its market share in the apparel segment, especially shirt-making.

Stratasys Ltd. is announcing updates to several Industrial and Healthcare Business Unit products and Stratasys Direct. These include a new open platform for the F900™ 3D printer, more on-demand 3D printing capabilities and a new high-performance material for its Fused Deposition Modeling line.

OpenAM comes to the F900
Stratasys OpenAM™ is a software application that enables the user to modify machine controls to achieve results beyond standard print settings. Already available for the Fortus 450®mc printer, Stratasys is now making its OpenAM software available for the F900 printer. This will allow for expanded functionality and capabilities and will unlock new materials for F900 users.

New VICTREX AM 200 material for FDM
A new material offering that opens the application potential for demanding industries like aerospace and medical, where material properties are critical components of a 3D-printed solutions. This new high-performance, high-strength, validated material, VICTREX AM™ 200, will be available for the Fortus 450mc and the F900. VICTREX AM 200 is a PEEK-based polymer that is temperature, corrosion, and chemical resistant, with excellent mechanical properties which can be utilized with soluble and breakaway support material.

Carbon Fiber Visual Print Option for the F-Series
Carbon Fiber Visual Print Option is a new 5-slice (0.005”) layer height across the F-123 Series™ line of printers that is coming later this month for FDM®ABS-CF10. It produces a smoother surface finish, to provide the perfect finish when a part’s visual appearance is important to the application. It is built for applications that demand the durability of a carbon-filled polymer, but also requires a visually appealing result without additional post-processing.

F770 adds New Colors
The F770® printer can now print in multiple colors, in addition to its original single ivory color. Six new ASA colors, including red, white, light gray, black, blue, and yellow, will allow for more application versatility with FDM® ASA and ABS-M30 tried-and-true engineering plastics. The new colors enable printing without painting or other post-production marking, allowing parts to be available much faster, increasing productivity.

Somos NeXt Validated for SLA
Somos® NeXt™ is now a validated material for Stratasys NEO® stereolithography 3D printers. Somos NeXt is a resin with superior strength and can be used in automotive and consumer products, along with other applications, including prototyping, to produce durable, accurate and detailed parts.

New GrabCAD Software Print Integration Enhances On-Demand 3D Printing Capabilities
Stratasys has introduced Parts on Demand by GrabCAD, a new integration that synchronizes the company's software platform with Stratasys Direct. This addition allows GrabCAD Print™ customers to access Stratasys Direct’s fleet of 3D printers, allowing for larger and more intricate designs, a selection of more than 50 engineered materials, and the assurance of stringent quality inspections.

The Schneider Group officially launches Authentico® by Schneider Group, a brand that stands for a transparent, verified, traceable, ethical and high-quality wool supply chain. It aims to be recognised as a global brand that enables the fashion industry, together with end-consumers, to choose new levels of premium quality comprising fully traceable and responsible wool, in compliance with a carefully structured approach that verifies, traces and brands the sourcing and manufacturing processes throughout the whole supply chain. Authentico® is based on the Schneider Group global certified network.

To achieve these goals, the Schneider Group has created the Authentico® Verification System, a simple and reliable way to provide criteria and guidelines for all Authentico® supply chain partners including:

• Authentico® Integrity Scheme, best practices for growers’ implementation at farm level. Animal welfare is at the heart of the Authentico® Integrity scheme, together with being mulesing-free, in accordance with The Five Domains. But the scheme goes further and encompasses also land and pasture management and social responsibility. The wool is sourced from carefully selected and highly committed growers, who apply best practices and choose to subscribe to the dedicated Authentico® platform. The selected fibres are processed into tops in the Schneider Group’s own mills located on several continents, which are directly operated and fully certified.
• Authentico® Brand Guidelines, for all other supply chain players (from spinners, weavers and knitters to garment makers, brands and retailers), that include precise criteria set by the Schneider Group to ensure alignment with Authentico® brand values.

In addition, the Schneider Group incorporates the traceability platform TextileGenesis™ within its Authentico® Verification System, to digitally track all incoming and outgoing wool.

The group has developed a marketing & communication plan to support its Authentico® brand. Upcoming events where Authentico® will be featured are: Pitti Filati in June, Milano Unica in July, the Natural Fibre Connect (NFC) in Biella in mid-September and the Textile Exchange Conference at the end of October in Pasadena.

The Fashion for Good Museum publishes its legacy document. The report was prompted by the museum’s closure on June 5th, 2024. It represents the museum’s mission, summarising invaluable insights gathered over six years and key results such as reaching 115.000 visitors and creating a dedicated community of more than 250.000 followers online. Committed to transparency and collaboration, Fashion for Good shares its reflections, tools, and transferable learnings, as well as the future of its collections and next steps, continuing to inspire positive change within the fashion ecosystem. All information can be accessed on the Fashion for Good website for continued use and benefit of educators, the cultural sector, and the wider public.

Looking back on its journey, the Fashion for Good Museum celebrates achievements such as hosting 115.000 visitors, including 8.000 students from 200 schools, curating 13 exhibitions, offering over 75 events, launching 4 educational programmes, reaching both current and future generations, and inspiring many to drive change in the fashion industry. With an earned media value of over 46 million Euros through press coverage since 2017, Fashion for Good's influence has been significant, evident in its 250.000 social media followers and 15.000 newsletter subscribers.

The report fulfils the promise Fashion for Good made in 2017 – to share their journey, learnings, and most impactful activities with the world. Within these pages, readers will discover reflections on their messaging, insights about creative partnerships with entities such as Lowlands Festival, Dutch Design Week, and Museumnacht to case studies of pioneering exhibitions. Their programming was created around themes and topics, such as the untold stories around cotton, circularity, and the future of biomaterials to educate and inspire visitors, ultimately empowering them to take action themselves.

Reflecting on the output of the museum during its short existence, as well as its footprint and wide reach, while acknowledging the challenges encountered during its establishment and development, Fashion for Good distilled six key lessons from Fashion for Good's sustainable museum practices:

• Recognition of Broader Shift: There is a wider movement towards sustainability in the museum sector, exemplified by Fashion for Good and the new ICOM definition.
• Storytelling for Societal Change: Cultural institutions are crucial in driving societal change in fashion consumption through storytelling.
• Innovation through Limitations: Embracing organisational limitations can stimulate innovation in museum collection management and education.
• Audience Engagement: Understanding and expanding the core audience is essential for effective engagement in sustainability initiatives.
• Measuring Impact: It's challenging to measure impact for organisations with social missions, requiring clear success criteria.
• Establishing a Sustainability Framework: Defining sustainability within context is fundamental for organisational sustainability efforts.

• Pitti Uomo and CHIC cooperate at the upcoming event in Florence from 11 to 14 June 2024 and present high fashion design from China under the roof of CHINA WAVE

From 11 to 14 June 2024, eight contemporary high class designer brands from China will present themselves for the first time at the leading menswear and lifestyle event Pitti Immagine Uomo at the Fortezza da Basso in Florence, on 264 square metres under the umbrella of CHIC, China International Fashion Fair.

CHINA WAVE, born from the partnership between Pitti Uomo and China National Garment Association, is a collection of China's designer labels showcasing their design expertise in Florence.The line-up includes VALLEYOUTH, KB HONG BY K-BOXING, RAXXY, JDV, FENGGY, BLACKHEAD, KEYONE BY HATTERSHUB, TYPETAIL.

Around 500 exhibitors with international participation from Europe and Asia are expected at the next CHIC from 27 to 29 August in Shanghai. CHIC - China International Fashion Fair is organised by the China National Garment Association in cooperation with the China World Exhibition.

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai, impress with customised solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Oerlikon Barmag pumps handle demanding processes in PUR applications, in the chemical, plastics or paint and lacquers industries. One of the greatest challenges lies in the accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications.

GM pump
Pumps in the GM series achieve precise dosing by feeding the flow with low pulsation. The multi-stage GM pump conveys low-viscosity media even under high pressure and the most difficult operating conditions (e.g. 250 bar, 100 mPas). The standard pump for many dosing tasks is the GM series in a square design. With the development of the multi-stage pump, the range of applications for the GM series has been significantly expanded. The round 2-stage GM pump has been specially developed for use in high-pressure technology. It fulfils the special challenge of pumping small flow rates with low viscosities. The pump serves flow rates from 0.05 to 20 ccm/rev and is therefore particularly suitable for the production of PUR moulded parts, block foam, refrigeration unit insulation or sandwich panels.  

GA series
Making products and processes more efficient is a constant challenge for manufacturing companies. This is why Oerlikon Barmag has added the GA series to the GM series especially for the demanding conveying of high-viscosity media. The GA series is available in delivery volumes of 1.25 - 30 cm³/rev (0.6-144 l/h). It is designed for pressures up to 200 bar, for viscosities up to 1,500 Pas and for temperatures up to a maximum of 225°C. With this pump series, Oerlikon Barmag offers customised solutions for process engineering processes where highly accurate and uniform metering is required.

The drum pump
The drum pump from Oerlikon Barmag is specially designed for conveying and dosing highly viscous materials such as adhesives, silicones and other highly viscous materials from drums and other large containers and for pressures of up to 250 bar. One of its special features is not only that it discharges highly viscous materials from the drum, but also that the medium can be dosed directly without an intermediate stop.

The gear pump and drum follower plate are synchronised so that the plate effortlessly reaches the bottom of the container, leaving behind only a very small residual quantity of < 1%. This reduces material costs and has a positive effect on the production process.

Messe Düsseldorf Group and PRINTING United Alliance, two important printing technology event organizers, announce a closer working relationship.

Starting in 2024, the partnership of the trade fairs drupa and PRINTING United Expo located in Europe and North America, respectively, will bolster the reach of each brand throughout the industry. Both organizations, with their customer-centric focus, will look to make all their events even more relevant and beneficial to both attendees and exhibitors in the ever-changing printing technology landscape.

PRINTING United Expo 2024 will be held in Las Vegas from September 10-12 at the Las Vegas Convention Center.

Archroma is bringing its new SUPER SYSTEMS+ concept and key denim innovations to Denim Première Vision Milan on June 5 and 6 and Denimsandjeans Vietnam on June 26 and 27.

From classic blue jeans to fashion-forward designs with fresh cuts, colors and finishes, denim remains one of the most popular fabrics worldwide. At the same time, the industry is beginning to question traditional production methods that use considerable water and energy and also have limitations in terms of the selection of chemicals and dyes that are clean and safe.

Archroma will demonstrate its solutions at Denim Première Vision Milan and Denimsandjeans Vietnam, including SUPER SYSTEMS+ for Denim. SUPER SYSTEMS+ are end-to-end systems developed by Archroma to allow brands and mills to make an impact by saving resources, delivering more durable apparel or adopting cleaner chemistries, or by choosing enhanced outcomes in all three areas at once. The suite encompasses wet processing solutions from sizing to finishing; durable colors and functional effects that add value; and cleaner chemistries that go beyond compliance to anticipate future restrictions.

Trade show visitors will also be able to explore Archroma’s new DENIM HALO, a laser-friendly and easy washable denim, as well as a range of other product innovations, such as DIRESUL® EVOLUTION BLACK, DENISOL® PURE INDIGO 30 and EarthColors®.

DIRESUL® EVOLUTION BLACK is Archroma’s cleanest sulfur black dyestuff. Manufactured using fewer resources, it has an overall impact reduction to 57% during dye synthesis compared to standard Sulfur Black 1 liquid.* Importantly, it also offers mills the opportunity to deliver unique shade and wash-down effects that stand out in the market.

DENISOL® PURE INDIGO 30 LIQ is an aniline-free** pre-reduced indigo that creates authentic denim look with the same performance and efficiency as conventional indigo dye, but in a way that can reduce the risk of pollution. Furthermore, it is produced in an aniline-free** process to help enable cleaner denim production.

EarthColors® is a patented Archroma technology that creates high-performance biowaste-based dyes from non-edible food and agricultural waste, leaving the edible part available for consumption. EarthColors® dyes are fully traceable and help reduce the industry’s overall impact on the water footprint. Since they upcycle waste from other industries, they also help contribute to a circular economy.

* Ecotarrae lifecycle analysis
** Below limits of detection according to industry standard test methods

Solvay held its Ordinary General Shareholders’ Meeting in Brussels, and shareholders voted in favor of all the proposed resolutions.

Solvay shareholders showed support to all resolutions and more specifically:

• The payment of a gross dividend of €2.43 per share for the year 2023. After deducting the interim dividend of €1.62 gross per share, paid on 17 January 2024, the balance amounts to €0.81 gross per share, payable from 5 June 2024.
• The re-election of Ms. Aude Thibaut de Maisières as a board member for a four-year term.
• The remuneration report.
• The appointment of EY for the assurance of sustainability information related to the Corporate Sustainability Reporting Directive (CSRD)