From the Sector

Reset
13 results
Photo: Pincroft
23.09.2022

Pincroft: Innovative non-skin contact vector protection for military fabrics

Pincroft announced the adoption of an innovative precision spray technology that allows the application of many finishes for textiles, including permethrin for vector protection, to the face of the fabric to avoid contact with the skin.

The system is a more versatile and environmentally friendly alternative to the traditional application method of padding and offers the possibility of applying the chemistry on either face side or both sides of the fabric across the full width.

The benefits of this new equipment are countless not only for the end user but also for the environment. The system allows for a reduction of energy, water and wet pick up of up to 50%, while 100% of the chemistry is recycled. Thanks to the equipment’s precision application technology, less water and chemistry are needed, and its no immersion system means the fabric would require less saturation and a shorter drying time.

Pincroft announced the adoption of an innovative precision spray technology that allows the application of many finishes for textiles, including permethrin for vector protection, to the face of the fabric to avoid contact with the skin.

The system is a more versatile and environmentally friendly alternative to the traditional application method of padding and offers the possibility of applying the chemistry on either face side or both sides of the fabric across the full width.

The benefits of this new equipment are countless not only for the end user but also for the environment. The system allows for a reduction of energy, water and wet pick up of up to 50%, while 100% of the chemistry is recycled. Thanks to the equipment’s precision application technology, less water and chemistry are needed, and its no immersion system means the fabric would require less saturation and a shorter drying time.

Mike Collins, Pincroft’s Managing Director: “This innovative equipment can be used in two ways. The single sided spray finishing can be used where the full effectiveness of the finish is only required on the face side of the end item, for example, vector, fluorocarbon and antimicrobial protection. The dual spray finish may be used to simulate the traditional padding method where full effectiveness of the finish is required dependant on end use, for instance, crease recovery, fabric softening, soil release and moisture management.”

This vector protection solution provided by Pincroft is ACTIGARD®, a branded technology developed by Sanitized AG, with long lasting active ingredients that have proved highly effective against mosquitoes and ticks. This product endures a high number of washes, is suitable for military uniforms and conforms to Standard 100 by Oeko-Tex®.

Source:

Pincroft

Photo: Pincroft
23.09.2022

Pincroft: New camouflage pattern for Dutch soldiers

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

The fabric was created by global workwear textile manufacturer, Carrington Textiles, specifically following the Dutch MoD’s requirements on comfort and protection. The result is a lightweight yet durable textile of 210gsm with a composition of 50% cotton, 50% high tenacity nylon and Ripstop for added strength.

The high cotton content of the fabric creates a uniform that’s comfortable to wear due to its softness to the touch, and breathability, as well as providing moisture wicking properties, key elements for the tough conditions soldiers work in. The addition of high tenacity nylon to the fabric, provides added strength and durability, with the Ripstop properties of the fabric offering tear resistance.

Around 480,000 trousers and jackets will be delivered to officers from the Royal Netherlands Navy, Army, Air Force and Marechaussee, during a uniform roll out part of the Dutch MoD’s ‘STRONG’ programme that aims to equip the armed forces in the next 18 months with versatile uniforms and equipment that are adjustable according to the assignment. The pack also includes a raincoat, combat shirt and baseball cap.

13.06.2022

AkzoNobel launches mosquito-repellent coating

People in Brazil have a new ally in the fight against an invasive carrier of dengue fever – a mosquito-repellent coating developed by AkzoNobel’s Coral brand.
 
Known as Well-being Protection Anti-Mosquito, the colorless matt varnish contains an active ingredient called permethrin. Its repellent action is specifically designed to combat the Aedes aegypti mosquito, which was largely responsible for dengue cases in Brazil surging 165% during the first few months of 2022 – according to figures from the Brazilian Ministry of Health. As well as spreading dengue, Aedes aegypti can also transmit the zika and chikungunya virus.
 
When a mosquito lands on the new transparent topcoat, the permethrin is absorbed through its feet and over-excites the insect’s nervous system, causing it to disengage or fall off. Permethrin is a well-known repellent and is commonly used in fabrics for mosquito nets and protective clothing.

People in Brazil have a new ally in the fight against an invasive carrier of dengue fever – a mosquito-repellent coating developed by AkzoNobel’s Coral brand.
 
Known as Well-being Protection Anti-Mosquito, the colorless matt varnish contains an active ingredient called permethrin. Its repellent action is specifically designed to combat the Aedes aegypti mosquito, which was largely responsible for dengue cases in Brazil surging 165% during the first few months of 2022 – according to figures from the Brazilian Ministry of Health. As well as spreading dengue, Aedes aegypti can also transmit the zika and chikungunya virus.
 
When a mosquito lands on the new transparent topcoat, the permethrin is absorbed through its feet and over-excites the insect’s nervous system, causing it to disengage or fall off. Permethrin is a well-known repellent and is commonly used in fabrics for mosquito nets and protective clothing.

The effectiveness of Well-being Protection Anti-Mosquito was tested in an independent external laboratory, certified by the Brazilian Network of Analytical Laboratories in Health. All the tests took place on painted walls and ceilings in a life-size house environment and successfully proved that mosquitoes were repelled from the room after contact, with the active ingredient being retained in the varnish matrix.

Source:

AkzoNobel

07.06.2022

ITMC presents date and speakers for its 8th edition

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

  • Omar Cherkaoui, ESITH : how ESITH was able to support the operators of the Moroccan textile sector during the covid-19 crisis
  • Tracy Toulouse, TT : the impact and legacy of our clothing is to identify us as a nation
  • Prof. Raul Fangueiro, University of Minho: fiber-based materials: from nano to macro scale
  • Pierre-Alexandre Fournier, Exoskin: the role of smart textiles in the future of health
  • KyoungOk Kim, Shinshu University: Patternmaking for attractive clothing for mass customization
  • Marie O’Mahony, Consultant, Royal College of Art (RCA): smart materials & systems: has embracing uncertainty become vital to commercialization?
  • Xianyi Zeng, Ensait: intelligent garments for online monitoring of human health and well-being
  • Corinne Farace, Techtera: The collaborative approach: a major stake in meeting the challenges of tomorrow
(c) DiloGroup
13.05.2022

DiloGroup at Techtextil with nonwovens technology

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

  1. Intense Needling
    Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
    Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

Mobile robot system for automated loading of a bobbin creel (c) STFI
12.05.2022

STFI with sustainable and digital innovations at Techtextil 2022

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.

12.10.2021

DSM to showcase armor solutions made with Dyneema® at Milipol Paris 2021

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

DSM, the inventor and manufacturer of Dyneema®, will be exhibiting at one of the leading events for homeland security and safety, Milipol Paris 2021, from October 19-22.

The performance characteristics of Dyneema® make it ideal for a variety of applications, including soft and hard armor ballistics to protect against today’s advanced and emerging threats. In addition, Dyneema® combines next-generation fiber technology and unidirectional engineering to deliver armor solutions with unmatched ballistic stopping power in a lightweight and flexible composite.

By implementing Dyneema®, body armor manufacturers are able to use less material in the development of their ballistic vests, plates and helmets. This leads to weight savings upwards of 30 percent when compared to competitive materials, without impacting ballistic performance. The lightweight construction of armor made with Dyneema® also mitigates injuries associated with the cumulative effects of daily armor use – while improving situational awareness, as well as cognitive and tactical performance.

While decreasing the load on the wearer, Dyneema® is simultaneously able to reduce the impact of material manufacturing on our planet. In line with DSM’s commitment to protect people and the environment they live in, we have developed the first-ever bio-based ultra-high molecular weight polyethylene fiber and unidirectional (UD) material. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE.

Source:

DSM Protective Materials / EMG

Freudenberg: Protection and Flexibility for Workwear (c) Freudenberg Performance Materials Holding SE & Co. KG
03.08.2021

Freudenberg: Protection and Flexibility for Workwear

Freudenberg Performance Materials (Freudenberg) offers a range of efficient interlinings, tapes and thermal insulation materials for workwear and protective clothing. The materials not only withstand diverse kinds of strain they are exposed to in everyday work and washing procedures but also offer great comfort.

Innovative materials and manufacturing technology
The nonwoven and woven interlinings and tapes stand out due to a number of features, such as increased stability, elasticity, abrasion resistance and wind-blocking properties. Thanks to the sophisticated adhesive technology used by the manufacturer of technical textiles, some products are especially resistant and durable.

Highly flexible and resilient interlinings as well as Freudenberg comfortemp® thermal insulation materials are used for protective clothing, and they do not only protect the wearer from danger but also ensure the wearer’s comfort in any kind of weather. Furthermore, hem and edge stabilisation tapes ensure optimal fit and reflective tapes provide additional safety.  

Freudenberg Performance Materials (Freudenberg) offers a range of efficient interlinings, tapes and thermal insulation materials for workwear and protective clothing. The materials not only withstand diverse kinds of strain they are exposed to in everyday work and washing procedures but also offer great comfort.

Innovative materials and manufacturing technology
The nonwoven and woven interlinings and tapes stand out due to a number of features, such as increased stability, elasticity, abrasion resistance and wind-blocking properties. Thanks to the sophisticated adhesive technology used by the manufacturer of technical textiles, some products are especially resistant and durable.

Highly flexible and resilient interlinings as well as Freudenberg comfortemp® thermal insulation materials are used for protective clothing, and they do not only protect the wearer from danger but also ensure the wearer’s comfort in any kind of weather. Furthermore, hem and edge stabilisation tapes ensure optimal fit and reflective tapes provide additional safety.  

Active contribution to sustainability
Many products of the Freudenberg Workwear Range consist of a high percentage of recycled polyester coming from post-consumer PET bottles.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

DSM/MKU Ltd: High-performance, lightweight ballistic protection in Brazil (c) DSM Protective Materials: DSMPMPR007
26.04.2021

DSM/MKU Ltd: High-performance, lightweight ballistic protection in Brazil

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, announced that, together with armor manufacturing partner, MKU Ltd, has provided next generation armor technology with Dyneema® unidirectional (UD) material to support the Sao Paulo police.

The Sao Paulo police, which is comprised of more than 100,000 officers, is the first law enforcement agency in Brazil to initiate a tender for personal protective equipment based on the latest National Institute of Justice (NIJ) .06 standards for body armor, which provide comprehensive and rigorous compliance for the performance and testing of ballistic materials. In addition to NIJ .06 certification, the tender set extremely lightweight requirements for level IIIA soft armor vests.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, announced that, together with armor manufacturing partner, MKU Ltd, has provided next generation armor technology with Dyneema® unidirectional (UD) material to support the Sao Paulo police.

The Sao Paulo police, which is comprised of more than 100,000 officers, is the first law enforcement agency in Brazil to initiate a tender for personal protective equipment based on the latest National Institute of Justice (NIJ) .06 standards for body armor, which provide comprehensive and rigorous compliance for the performance and testing of ballistic materials. In addition to NIJ .06 certification, the tender set extremely lightweight requirements for level IIIA soft armor vests.

The hybrid vest solution developed MKU, a global leader in defense and homeland security solutions, for the Sao Paulo police utilizes predominantly Dyneema® UD material to reach new levels of performance and protection while simultaneously enhancing user comfort and mobility. Dyneema®, a strong and light fiber, is the one of leading global brands for ultra-high molecular weight polyethylene (UHMwPE) fiber, UD and fabrics, offering ballistic solutions for personal and vehicle armor that combine maximum strength with minimum weight.

In soft armor applications, Dyneema® offers up to 35 percent weight reduction when compared to competitive materials, while still protecting against both legacy and emerging threats.

In addition to the lightweight armor requirement, the vests were also thoroughly tested to ensure performance with NIJ ballistic reports, NIJ certification and in-house ballistic testing both during the tender process and after the vests were received.

In line with DSM’s commitment to protect people and the environment they live in, one of the world’s first ever bio-based HMPE fibers was introduced in 2020.

ndré Rehn, Head of Sales for Trade Fairs & Congresses at C³ GmbH (c) C³ GmbH
ndré Rehn, Head of Sales for Trade Fairs & Congresses at C³ GmbH
30.04.2020

2020 “mtex+” cancelled because of the corona crisis

  • The “Newcomer Award” will still be presented at the 8th Convention & Fair for Hightech Textiles
  • Chemnitz organisers considering forward-looking forums using the “mtex+” brand

The 8th mtex+ Convention & Fair for Hightech Textiles, which was scheduled to be held on 9-10 June 2020, will not take place because of the corona crisis. “We’ve made this decision following in-depth consultations with the members of the advisory board who are working in the textile sector; they were also opposed to moving the date to the autumn because of the unforeseeable consequences arising from the crisis,” says  André Rehn, Head of Sales for Trade Fairs & Congresses at the organiser, C³ GmbH, Chemnitz.

  • The “Newcomer Award” will still be presented at the 8th Convention & Fair for Hightech Textiles
  • Chemnitz organisers considering forward-looking forums using the “mtex+” brand

The 8th mtex+ Convention & Fair for Hightech Textiles, which was scheduled to be held on 9-10 June 2020, will not take place because of the corona crisis. “We’ve made this decision following in-depth consultations with the members of the advisory board who are working in the textile sector; they were also opposed to moving the date to the autumn because of the unforeseeable consequences arising from the crisis,” says  André Rehn, Head of Sales for Trade Fairs & Congresses at the organiser, C³ GmbH, Chemnitz.

“Cancelling the event is a particularly severe blow for us, as the “mtex+” was supposed to be held with a modernised concept and a very attractive programme at our new Carlowitz Congresscenter at the heart of Chemnitz for the first time. The considerable economic loss associated with this is naturally painful for us too. However, we will be presenting our “mtex+” “Newcomer Award” to the prize-winners at the next possible, suitable opportunity. 15 students and graduates from all over Germany have taken part in the young people’s competition with creative ideas for recycling, upcycling and downcycling textiles. We’re also now considering special events, which could operate using our well-known “mtex+” brand in future. Sustainability in the textile value-added chain as well as health and protective textiles made by the domestic market are obvious, forward-looking topics in this field.”

More information:
mtex+
Source:

C³ GmbH

“mtex+” textile fair & convention raises profile and increases international appeal (c) mtex+ / Kristin Schmidt
These Czech exhibitors presented technical textiles and lightweight textile components at the 2018 “mtex+” at Chemnitz Trade Fair Centre. The 8th “mtex+” is being held as the “Fair & Convention for Hightech Textiles” in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 – 10 June 2020.
20.02.2019

“mtex+” textile fair & convention raises profile and increases international appeal

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

More information:
mtex
Source:

vti-pressedienst      mtex+ press service

Cinte Techtextil (c) Messe Frankfurt / Cinte Techtextil China edition
01.03.2018

New date for Cinte Techtextil China 2018 as exhibitor registration opens

Exhibitor registration is open for Cinte Techtextil China, which will take place with an earlier date of 4 – 6 September this year. Asia’s largest biennial event for the entire technical textiles and nonwovens sector, the fair is held in a region that not only continues to grow strongly but is expected to do so for the foreseeable future, not least due to major government initiatives in China that are injecting billions of dollars of investment into the industry.

Exhibitor registration is open for Cinte Techtextil China, which will take place with an earlier date of 4 – 6 September this year. Asia’s largest biennial event for the entire technical textiles and nonwovens sector, the fair is held in a region that not only continues to grow strongly but is expected to do so for the foreseeable future, not least due to major government initiatives in China that are injecting billions of dollars of investment into the industry.

“It is due to the increasing opportunities in the Asian market that we are expecting more European exhibitors to feature at Cinte Techtextil China this year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd outlined. “As the fair attracts a diverse range of trade buyers, including from 12 different application areas such as Buildtech, Clothtech, Geotech, Medtech, Mobiltech and Protech, it is a unique opportunity within Asia for suppliers to meet with the entire industry and maximise the potential of their products across various end-uses and sectors.” While many new European companies are expected this year, some of the returning big brands already confirmed include Trützschler, Dilo and Barnet from Germany, Andritz from France, Stahl from the Netherlands, Itema from Italy and Picanol from Belgium.

Chinese and Asian technical textiles and nonwovens markets continue their upward trajectory
When it comes to technical textiles and nonwovens, the Asian region, and China in particular, is displaying impressive growth, which will remain the case in the coming years.

China overall

  •  The total output of technical textiles and nonwoven products is estimated to reach over 22 million tons in 2020, accounting for 30% of global production, and double that of 2013.
  •  In 2016, China’s technical textile exports were worth USD 23.61 billion. Nine major products surpassed USD 1.5 billion worth of exports each: medical & hygiene textiles, coated textiles, nonwovens, canvas & tarp textiles, ropes, synthetic leather substrates and package textiles.
  • Growth will be seen especially in the following sectors in the coming five years               

                  Filtration & separation textiles
                  Medical & hygiene textiles
                  Geotechnical textil
                  Structural reinforcement textiles
                  Transportation textiles
                  Protective textiles

Nonwovens

  • China accounted for 10.5% of global nonwovens imports in 2015.
  • China alone will account for around 57% of the Asian consumption of nonwovens from 2016 to 2020.
  • According to the China Nonwovens & Industrial Textiles Association (CNITA), the following nonwoven sectors will experience the highest growth in this period:

                 Environmental protection
                 Medical, healthcare and elderly care
                 Emergency services and public security
                 New-energy automotive
                ‘Belt and Road’ supporting industries

Man-made fibres

  • China currently accounts for 65% of world market share of man-made fibres, with demand in the wider Asian region expected to remain strong in coming years thanks to growing populations and rising living standards in China and emerging Asian countries.
  • The driving force is not only clothing, but also new applications such as the filtration, construction, protection and transportation industries.
Protective Textiles Market Analysis to 2025 ©Research and Markets
Protective Textiles Market Analysis to 2025
28.08.2017

Protective Textiles Market Analysis to 2025

The global protective textiles market is expected to reach USD 7.78 billion by 2025, according to this new report. The market is expected to witness growth at 3.4% CAGR owing to increasing industrial fatalities in developing economies owing to the lack of protective gear coupled with growing awareness of worker's health and safety are expected to drive the market growth.

The increasing importance of raw materials that offer features such as lightweight, comfort, higher heat resistance, and wear & tear resistance for workwear has been a significant incentive for companies to conduct R&D activities extensively. The initiatives are mainly intended at attaining multi-functionality of workwear fabrics and rise its application scope. Improving product designs and specifications are expected to provide market participants with immense opportunities over the forecast period.

The global protective textiles market is expected to reach USD 7.78 billion by 2025, according to this new report. The market is expected to witness growth at 3.4% CAGR owing to increasing industrial fatalities in developing economies owing to the lack of protective gear coupled with growing awareness of worker's health and safety are expected to drive the market growth.

The increasing importance of raw materials that offer features such as lightweight, comfort, higher heat resistance, and wear & tear resistance for workwear has been a significant incentive for companies to conduct R&D activities extensively. The initiatives are mainly intended at attaining multi-functionality of workwear fabrics and rise its application scope. Improving product designs and specifications are expected to provide market participants with immense opportunities over the forecast period.

Ballistic protective apparel is estimated to witness the highest penetration and growth over the projected period, owing to the increasing use of high performance protective textiles in the military sector. Defense sector holds the largest market segment in the global ballistic fabrics industry and is anticipated to have remarkable growth over the next few years driven by rising concerns over national security and escalating geopolitical unrests.

Further key findings from the report suggest:

  • The heat and flame-resistant garments application segment was worth USD 1.21 billion in 2016 and is estimated to grow at a CAGR of around 3%, owing to rising demand in end-use industries such as oil & gas, refineries, iron & steel plants, and aluminum plants
  • Mechanical protective clothing in the U.S. accounted for over 17% of the total revenue in 2016
  • Chemical defending garments segment is anticipated to grow at a CAGR of 3.5% from 2017 to 2025
  • Electrical protection apparel is estimated to reach USD 637.1 million by 2025 and is projected to witness moderate growth over the next few years
  • In the application of surgical garments, the protective textiles play a significant role in the absorption of excessive heat during surgical procedures from the body, which is estimated to raise the product demand for health care sector
  • The market in North America is expected to grow at a CAGR of over 3.5% over the next decade to reach a net worth exceeding USD 2.30 million by 2025
  • Asia Pacific is projected to witness the maximum growth over the next nine years. The region accounted for 19.1% of the total revenue in 2016
  • Key players such as DuPont, W.L. Gore & Associates Inc., Royal Ten Cate NV, and Schoeller Textil AG dominated the global protective textile market over the past few years

Companies Mentioned:

- W. L. Gore & Associates, Inc.
- DuPont
- Royal Ten Cate NV
- DyStar Group
- Kusumgar Corporates
- Madhuram Fabrics Pvt. Ltd.
- Schoeller Textil AG
- PBI Performance Products, Inc.
- Teijin Limited
- Marina Textil S.L.
- ARGAR S.r.l

For more information please click on: https://www.researchandmarkets.com/publication/mqpxufx/4375403

Source:

Research and Markets, Guinness Centre, Taylors Lane, Dublin