From the Sector

Solvay held its Ordinary General Shareholders’ Meeting in Brussels, and shareholders voted in favor of all the proposed resolutions.

Solvay shareholders showed support to all resolutions and more specifically:

• The payment of a gross dividend of €2.43 per share for the year 2023. After deducting the interim dividend of €1.62 gross per share, paid on 17 January 2024, the balance amounts to €0.81 gross per share, payable from 5 June 2024.
• The re-election of Ms. Aude Thibaut de Maisières as a board member for a four-year term.
• The remuneration report.
• The appointment of EY for the assurance of sustainability information related to the Corporate Sustainability Reporting Directive (CSRD)

The consortium of Teijin Limited, Fukui Tateami Co., Ltd., and Osaka Medical and Pharmaceutical University announced that a novel surgical patch, under the brand name SYNFOLIUM®, will be released for manufacturing and distribution by Teijin Medical Technologies Co., Ltd. on June 12, 2024.

SYNFOLIUM® is a surgical patch with knitted fabric consisting of both bio-absorbable and non-absorbable yarns, which are coated with cross-linked gelatin. After the patch is surgically implanted in the body, the patient’s tissue grows and gradually surrounds the expandable, non-absorbable portion, while the bio-absorbable portion degrades. The regenerated tissue has the potential to reduce the risk of inflammatory reactions, foreign body reactions and cell death, which often cause deterioration of the implants.

This new product is designed to be used in surgical treatment of patients with congenital heart disease (CHD). The prevalence of CHD is 1 in 100 people globally, and in Japan, it is estimated that approximately 10,000 neonates are born with the disease each year. Newborns and infants with CHD generally undergo surgeries to correct hemodynamic problems due to septal defects or narrowed blood vessels (stenosis) by implanting a medical patch, usually made from synthetic or animal-derived materials. However, over a long period after surgery, a considerable number of patients eventually require re-interventions, such as repeat surgery or catheter therapy, due to the deterioration of the implanted patch. This deterioration can be caused by an immune-mediated foreign body reaction or the development of stenosis due to the inability of the patch to stretch in response to the growth of cardiac and vascular tissue.

To address this clinical problem, Shintaro Nemoto, M.D., Ph.D., of Osaka Medical and Pharmaceutical University, created an idea for a patch that could accommodate the growth of patients’ bodies through restoration by the patient’s own tissues. In 2012, he began research and exploration to make this idea a reality.

Fukui Tateami, a pioneer in warp-knitting technology based in Fukui Prefecture, turned Dr. Nemoto’s idea into the novel concept of an expandable cardiovascular patch. Based on advanced warp knitting technology it developed over the 80 years since its founding, the company created a special knitted fabric structure to accommodate tissue regeneration.

Teijin developed the technology to coat knitted fabric with gelatin, which can prevent blood leakage and can be replaced by the patient’s own tissue. The company has been proceeding with design and development, clinical trials, establishment of a commercial production system, and application for manufacturing and marketing approval in Japan.

The development of SYNFOLIUM® has been supported by the Ministry of Economy, Trade and Industry since 2014, as well as by a program launched in 2017 by the Japan Agency for Medical Research and Development (AMED) to facilitate collaboration between medical academia and industry. Japan’s Ministry of Health, Labor and Welfare designated SYNFOLIUM® as a “SAKIGAKE” device in April 2018, providing various incentives to speed up approval for clinical use. In addition, the Japanese Society of Pediatric Cardiology and Cardiac Surgery cooperated by assisting with clinical trials and providing advice on creating guidelines for appropriate use.

Clinical trials that began in 2019 were completed in 2022, and Teijin Medical Technologies applied for manufacturing and sales approval to the Ministry of Health, Labor and Welfare in January 2023. The company received approval in July of the same year.

Going forward, Teijin and Teijin Medical Technologies, Fukui Tateami, and Osaka Medical and Pharmaceutical University will provide clinical information about this product to medical institutions to facilitate its use in patients with CHD. Teijin and Teijin Medical Technologies will continue to collect and analyze cases using SYNFOLIUM® to establish its long-term safety and efficacy.

Furthermore, to help improve the quality of life of patients with CHD around the world, the consortium plans to market SYNFOLIUM® overseas by working to gain manufacturing and marketing approval in the United States, the European Union and other countries.

KM.ON launches its new Quality Monitoring System (QMS) for the retrofit market at ITM from June 4 to 8 in Istanbul, presenting a solution for quality management on warp knitting machines.
For its performance in defect detection, the QMS uses the advances of our time: a camera system that captures images of the production process, and a specialized artificial intelligence (AI) to analyze the images. Particularly in terms of handling, reliability and precision of defect detection, the QMS from KM.ON offers advantages over conventional systems that do not rely on AI analysis.

The QMS is designed for easy setup and can be operated without prior expertise. If a defect causes the machine to come to a standstill, the operator is informed immediately via a user-friendly interface. The immediate warning enables rapid intervention and therefore less downtime and more productivity.

Thanks to its conceptual design, the QMS only stops production when actual defects are detected. Unnecessary interruptions caused by external disruptive factors, such as changing light conditions, are avoided. This precision prevents productivity losses and helps to ensure continuous operation. Costs due to unnecessary machine downtime are avoided.

Unlike conventional camera systems, the QMS detects even the most complex defects and triggers an immediate machine stop. This minimizes material waste. During operation, the AI-controlled system learns from the data to enhance its detection accuracy, thereby reducing the reject rate and costs. The QMS also adapts to evolving production environments to ensure consistently high efficiency.

Manufacturer of activewear and swimwear, Active Apparel Group (AAG), has committed to a structured approach in reducing its environmental impact across its global operations through an Environmental Management System (EMS). The EMS, built using the ISO14001 Standard Framework, incorporates key environmental policy commitments and has set targets and strategies to reduce the carbon footprint of its operations across China, Australia and USA.

Through a third-party audit of its greenhouse gas emissions (GHGs), AAG has identified the following areas of focus to reduce impacts:

• Reduction in Scope 1 energy use
• Reduction in air freight
• Reduction in water usage across the business
• Ongoing collection and management of production waste
• Increased use of sustainable materials
• Continued collection of GHG data for ongoing improvement

AAG’s EMS is designed to be embedded within the operations of the business, with functional ownership of targets established and education of the team prioritized, to deliver results on reducing environmental impact. Quarterly reporting of its progress is communicated to stakeholders and reviewed by the company’s Board of Directors.

The EMS is part of AAG’s ongoing Responsible Business Strategy - a company-wide commitment to driving continuous improvement across the areas of Governance, Social and Environmental impact. Other initiatives include Living Wage Audit by Bureau Veritas (AAG pays 100% Living Wage); Materiality Assessment; Supply Chain Traceability Project; Circularity and Waste Management along with annual third-party audits - SMETA, Gold WRAP, Supplier Qualification Program and its Modern Slavery Statement.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the ITM 2024 International Textile Machinery Exhibition in Istanbul, Türkiye from 4th to 8th June 2024 with a full product lineup.

WHOLEGARMENT® knitting has recently gained heavy interest from the apparel industry due to the shrinking workforce of skilled sewing and linking personnel, as well as for its sustainable benefits by requiring the minimum amount of material to produce one item at a time. SHIMA SEIKI intends to gain even more interest with its new SWG-XR® flagship machine. SWG-XR® features the company's original SlideNeedle™on 4 needle beds for high quality production of WHOLEGARMENT® products using all needles, in addition to a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit before, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at ITM will be shown in 15L. The MACH2®XS WHOLEGARMENT® knitting machine, also with original SlideNeedle™ on four needle beds, will be shown in 8L. Other WHOLEGARMENT® knitting machines include the MACH2®VS V-bed machine for producing WHOLEGARMENT® items using every other needle, shown in 8 and 18 gauges, as well as the compact SWG®091N2 for producing smaller WHOLEGARMENT® items and accessories, to be shown in 10 gauge. An economical proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 machine in 24 gauge.

SHIMA SEIKI’s technology in computerized shaped knitting is represented by its N.SVR®122 computerized flat knitting machine in 14 gauge, and features such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Also on display will be the SCG®122SN coarse gauge machine in 3 gauge. Automatic seamless glove knitting machines will also be present, including the SFG®20 21-gauge machine, and SFG®-I in 10 gauge.

On the software side, demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system and APEXFiz® subscription-based design software. Each provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way the design evaluation process is improved with ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz® help to digitally transform the fashion supply chain for realizing sustainable manufacturing. SHIMA KnitManager™ knit production management software will also be shown to demonstrate solutions for maximizing productivity through monitoring of machine status and production progress.

adidas Originals and gaming lifestyle brand 100 Thieves present their inaugural collaborative collection.

Founded in 2017 by gaming icon Matthew "Nadeshot” Haag, 100 Thieves has established itself as the premium lifestyle brand for the gaming generation, with a mission to be the epicenter of gaming-culture and to give every gamer something to be proud of. 100 Thieves, fronted by digital creators Nadeshot, Valkyrae, and CouRageJD, is built on three pillars: championship esports, entertainment, and apparel.

The first ever collaborative collection between the Trefoil and 100 Thieves consists of apparel, footwear, and accessories. The apparel selection features the previously announced competition jersey – with sponsor logos removed – in men’s and women’s sizing, as well as 100 Thieves’ take on the classic adidas track-suit presented as a matching half-zip track top and track pants in brushed cotton-terry. Rounding out the selection of apparel and accessories are a classic white tee with embroidered logo, a 3-pack of socks in 100 Thieves colors, and a co-branded towel.

In-store Asia, a trade fair for retail resources and investments in store design, visual merchandising and in-store marketing on the Indian subcontinent will again be held in Mumbai from 13 to 15 June 2024. Over the course of the 15 years of its existence it has become established as the biggest get-together of retail decision-makers in India. Here, over 4,500 players from retail, consulting and services, manufacturers as well as retail solution providers come together.

Visitors to In-store Asia have the opportunity to discover a wide variety of exhibitors showcasing their products and solutions for the retail sectors including:

• Point-of-Purchase (POP) displays and interactive flatscreens
• Visual Merchandising (VM) and store fittings
• Signage and graphic design solutions
• Retail technologies for improving customer retention
• Tailor-made store design services
• Start-up initiatives for the retail sector

The 2-day conference at In-store Asia provides a platform for discussions about current retail trends in India and the world over. More than 40 key speakers from India and abroad will share their forecasts, latest trends and use cases on the topics of retail markets, retail experience design, sustainability, visual merchandising, retail technology and store fitting under the inspiring motto “Connected, Collaborative, Conscious”.

Highlights at the trade fair amongst others include the VM&RD Retail Design Awards and the VM Challenge, two events that honour special achievements and innovations in visual merchandising and store fitting. The VM&RD Retail Design Awards acknowledge outstanding store fitting projects in a total of 24 categories. The VM Challenge is a unique live window display contest for the visual merchandising community where six teams compete to dress a window on a given theme.

Polartec, a Milliken & Company brand and the premium creator of innovative and more sustainable textile solutions, unveils the first of three short films which comprise the company’s multifaceted Beyond Begins Today campaign. Featuring Eva Karlsson (CEO, Houdini), Chris Parkes (Natural World Photographer), and Karen Beattie (Director of Product Management, Polartec), the first chapter explores our Planet and the intrinsic value of our natural world.

As a global initiative through which Polartec aims to raise awareness and unity around important universal themes including sustainability, diversity and positive change, Beyond Begins Today leverages static and multimedia content published on multiple touchpoints and channels throughout the year. Chapter 1: the Planet, is the first of three chapters with the second and third chapters dedicated to Product and People respectively.

Fashion for Good launches the Sorting for Circularity USA report unveiling significant findings from the project. A first of its kind in the US, the report delves into consumer disposal behaviour, textile waste composition, and the potential for fibre-to-fibre recycling within the country. It provides insights for making informed decisions for further investments, infrastructure development and the next steps towards circularity.

The U.S. Textile Waste Landscape
The United States is a global leader in textile consumption and waste generation, positioning itself as one of the largest sources of secondary raw materials for post-consumer textile feedstock. Despite this, only 15% of the textile waste generated in the US is currently recovered, with 85% ending up in landfills or incinerators.

With the impending policies in the European Union and certain American states, alongside commitments from both public and private sectors to promote fibre-to-fibre recycling, there is a growing demand for infrastructure related to post-consumer textile collection, sorting, and recycling.

Addressing Data GPS
In the pursuit of establishing a functional reverse supply chain and the necessary infrastructure, two critical areas lack data  – consumer disposal behaviour, and material characteristics of post-consumer textiles. The Sorting for Circularity USA project addressed these gaps through a comprehensive national consumer survey and waste composition analysis.

The survey revealed that 60% of respondents divert textiles, while 4% discard them, driven primarily by factors such as condition and fit. On the other hand, the waste composition analysis unveiled that over 56% of post-consumer textiles are suitable for fibre-to-fibre recycling, with cotton and polyester being the most prevalent fibre types, indicating a substantial potential for these textiles to be used as feedstock for mechanical and chemical recycling processes.

The project revealed a $1.5 billion opportunity for fibre-to-fibre recycling by redirecting non-rewearable textiles from landfills and incinerators to recycling streams. The report outlines growth strategies for the US textile recycling industry, emphasising enhanced financial value through efficiency improvements, increased commodity valuation, and policy mechanisms like extended producer responsibility schemes. Collaboration among stakeholders is crucial, including brands, government, retailers, consumers, collectors, sorters, recyclers, and financial institutions, to promote circularity, invest in research and development, and advocate for supportive policies and incentives to drive technological innovation. This redirection of textiles towards recycling underscores the substantial economic potential of embracing circularity in the textile industry.
 
There is an opportunity to build on these insights and assess the feasibility of different sorting business models and (semi) automated sorting technologies to create a demo facility suitable for closed-loop textile recycling. Ultimately, evaluating the commercial and technical feasibility of a semi-automated sorting process and identifying investment opportunities to scale solutions nationwide.

TrusTrace, a global SaaS company with a market-leading platform for supply chain traceability and compliance in fashion and retail, announced the launch of its third playbook entitled, “Unlocking DPP: The Why, What and How of Digital Product Passports.”

Unveiled at the Global Fashion Summit in Copenhagen, the playbook offers a guide for fashion industry professionals grappling with the data collection and implementation of the widely anticipated Digital Product Passport, which will come into force in the European Union between 2026-2030. The book busts some common myths and misconceptions about the DPP, and offers a data protocol for brands to follow to start collecting DPP data and setting up their digital systems for DPP implementation.

The guide, which has been authored by journalist Brooke Roberts-Islam, opens with ‘The Why’ of the DPP, breaking down the complex set of incoming EU legislation, and explaining why DPP is an essential tool for achieving the EU’s legally-binding commitment to reach net-zero greenhouse gas emissions by 2050. The guide highlights the significant data gaps and how the DPP will address these by collecting and sharing circularity data.

‘The What’ section explains the three core components of the DPP: product data, unique identifiers and the required interoperable IT system (for decentralized data sharing). This section also offers a breakdown of who and what is in scope, along with the required data systems. ‘The When’ offers all brands an essential overview of the DPP timeline and requirements for textile products under the ESPR.

‘The How’ provides brands with the essential steps to successfully collect data and implement a DPP scheme. The insights in this chapter are derived from the Trace4Value project, a live DPP pilot led by TrusTrace to test an end-to-end DPP data and system infrastructure for textile products entering the EU market. The pilot cohort embedded DPP carriers with live data into selected Kappahl and Marimekko products, which launched on the market in early 2024.