From the Sector

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai, impress with customised solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Oerlikon Barmag pumps handle demanding processes in PUR applications, in the chemical, plastics or paint and lacquers industries. One of the greatest challenges lies in the accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications.

GM pump
Pumps in the GM series achieve precise dosing by feeding the flow with low pulsation. The multi-stage GM pump conveys low-viscosity media even under high pressure and the most difficult operating conditions (e.g. 250 bar, 100 mPas). The standard pump for many dosing tasks is the GM series in a square design. With the development of the multi-stage pump, the range of applications for the GM series has been significantly expanded. The round 2-stage GM pump has been specially developed for use in high-pressure technology. It fulfils the special challenge of pumping small flow rates with low viscosities. The pump serves flow rates from 0.05 to 20 ccm/rev and is therefore particularly suitable for the production of PUR moulded parts, block foam, refrigeration unit insulation or sandwich panels.  

GA series
Making products and processes more efficient is a constant challenge for manufacturing companies. This is why Oerlikon Barmag has added the GA series to the GM series especially for the demanding conveying of high-viscosity media. The GA series is available in delivery volumes of 1.25 - 30 cm³/rev (0.6-144 l/h). It is designed for pressures up to 200 bar, for viscosities up to 1,500 Pas and for temperatures up to a maximum of 225°C. With this pump series, Oerlikon Barmag offers customised solutions for process engineering processes where highly accurate and uniform metering is required.

The drum pump
The drum pump from Oerlikon Barmag is specially designed for conveying and dosing highly viscous materials such as adhesives, silicones and other highly viscous materials from drums and other large containers and for pressures of up to 250 bar. One of its special features is not only that it discharges highly viscous materials from the drum, but also that the medium can be dosed directly without an intermediate stop.

The gear pump and drum follower plate are synchronised so that the plate effortlessly reaches the bottom of the container, leaving behind only a very small residual quantity of < 1%. This reduces material costs and has a positive effect on the production process.

KM.ON launches its new Quality Monitoring System (QMS) for the retrofit market at ITM from June 4 to 8 in Istanbul, presenting a solution for quality management on warp knitting machines.
For its performance in defect detection, the QMS uses the advances of our time: a camera system that captures images of the production process, and a specialized artificial intelligence (AI) to analyze the images. Particularly in terms of handling, reliability and precision of defect detection, the QMS from KM.ON offers advantages over conventional systems that do not rely on AI analysis.

The QMS is designed for easy setup and can be operated without prior expertise. If a defect causes the machine to come to a standstill, the operator is informed immediately via a user-friendly interface. The immediate warning enables rapid intervention and therefore less downtime and more productivity.

Thanks to its conceptual design, the QMS only stops production when actual defects are detected. Unnecessary interruptions caused by external disruptive factors, such as changing light conditions, are avoided. This precision prevents productivity losses and helps to ensure continuous operation. Costs due to unnecessary machine downtime are avoided.

Unlike conventional camera systems, the QMS detects even the most complex defects and triggers an immediate machine stop. This minimizes material waste. During operation, the AI-controlled system learns from the data to enhance its detection accuracy, thereby reducing the reject rate and costs. The QMS also adapts to evolving production environments to ensure consistently high efficiency.

Manufacturer of activewear and swimwear, Active Apparel Group (AAG), has committed to a structured approach in reducing its environmental impact across its global operations through an Environmental Management System (EMS). The EMS, built using the ISO14001 Standard Framework, incorporates key environmental policy commitments and has set targets and strategies to reduce the carbon footprint of its operations across China, Australia and USA.

Through a third-party audit of its greenhouse gas emissions (GHGs), AAG has identified the following areas of focus to reduce impacts:

• Reduction in Scope 1 energy use
• Reduction in air freight
• Reduction in water usage across the business
• Ongoing collection and management of production waste
• Increased use of sustainable materials
• Continued collection of GHG data for ongoing improvement

AAG’s EMS is designed to be embedded within the operations of the business, with functional ownership of targets established and education of the team prioritized, to deliver results on reducing environmental impact. Quarterly reporting of its progress is communicated to stakeholders and reviewed by the company’s Board of Directors.

The EMS is part of AAG’s ongoing Responsible Business Strategy - a company-wide commitment to driving continuous improvement across the areas of Governance, Social and Environmental impact. Other initiatives include Living Wage Audit by Bureau Veritas (AAG pays 100% Living Wage); Materiality Assessment; Supply Chain Traceability Project; Circularity and Waste Management along with annual third-party audits - SMETA, Gold WRAP, Supplier Qualification Program and its Modern Slavery Statement.

Polartec, a Milliken & Company brand and the premium creator of innovative and more sustainable textile solutions, unveils the first of three short films which comprise the company’s multifaceted Beyond Begins Today campaign. Featuring Eva Karlsson (CEO, Houdini), Chris Parkes (Natural World Photographer), and Karen Beattie (Director of Product Management, Polartec), the first chapter explores our Planet and the intrinsic value of our natural world.

As a global initiative through which Polartec aims to raise awareness and unity around important universal themes including sustainability, diversity and positive change, Beyond Begins Today leverages static and multimedia content published on multiple touchpoints and channels throughout the year. Chapter 1: the Planet, is the first of three chapters with the second and third chapters dedicated to Product and People respectively.

AkzoNobel has announced the intention to close the manufacturing sites of Groot-Ammers (The Netherlands), Cork (Ireland) and Lusaka (Zambia) and transfer the production to other locations in the region. This intention is the first part of a multi-year industrial efficiency plan to be fully finalized by the end of 2026.
 
The intended site closures align with AkzoNobel's strategic priorities and its commitment to industrial excellence. By focusing on units with scale and higher cost efficiencies, AkzoNobel aims to rationalize, upgrade and optimize its industrial network to improve competitiveness and drive sustainable growth.
 
The related social partners have been informed about the intended closures and next steps.  Finalization will follow after the usual consultation process with employees and local social partners.

Monforts, which is celebrating its 140th anniversary this year, will exhibit a Montex stenter chamber with an integrated overhead heat recovery unit at the forthcoming ITM textile machinery exhibition in Istanbul from June 4-8.

The heat recovery unit on display at the stand of Monforts partner Neotek is just one of a range of energy saving options the company is now providing for both new and existing line installations.

Monforts Montex stenters and Thermex dyeing ranges are industry standard for the fabric finishing industry, providing many advantages in terms of production throughput and especially in energy efficiency and savings.

coaTTex
At ITM, Monforts will also introduce its latest coaTTex coating unit, dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines, especially Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and coating, including black-out coating.

Central location
“In Turkey we are very strongly supported by our representative Neotek, our solution partner on the ground for service, installation and commissioning, providing specialised and rapid help to all of our customers,” says Monforts Area Sales Manager Thomas Paeffgen. “ITM is always one of the most important exhibitions for Monforts, for meeting customers not just from Turkey, but across the Middle East and Central Asia, as well as Bangladesh, India and Pakistan.

“Istanbul’s centralised position makes it accessible to the majority of the major textile manufacturing hubs and as we mark our 140th anniversary in 2024, having been founded back in 1884, the ITM show will provide us with the ideal opportunity to celebrate with colleagues and customers all together in one location.”

Juki America and Coloreel revealed a partnership that will extend Coloreel’s thread dyeing technology to the sewing industry. With Coloreel, Juki sewing machines can now access millions of precise colors in real time.

Juki’s distributors will get exclusive rights to market and sell Coloreel for sewing machines within North and South America. The first official installation of Coloreel paired with a Juki sewing machine will be at FABRIC Incubator in Arizona, USA, a fashion incubator and garment manufacturer that supports up-and-coming designers.

• Revenue up 5.7 percent year-on-year to EUR 658.4 million
• EBITDA more than doubles year-on-year to EUR 71.4 million
• Free cash flow of EUR 87.3 million (compared with minus EUR 132.3 million in the first quarter of 2023) and thereby positive for the third consecutive quarter
• Performance program shows positive effect on revenue, EDITDA, and free cash flow
• Lenzing confirms EBITDA guidance for 2024

The Lenzing Group, a leading supplier of regenerated cellulose for the textile and nonwovens industries, recorded a further improvement in fiber sales volumes in the first quarter of 2024. An expected recovery in markets relevant for Lenzing has to date failed to materialize. Fiber prices remained at a low level. Although the costs of raw materials and energy continued to decrease, they remained higher than in the pre-crisis 2019 year.

Outlook
Even though the IMF has upgraded its growth forecast for 2024 from 3.1 percent to 3.2 percent, a number of risks remain for the global economy: potential geopolitical shocks, persistently higher inflation and key interest rates, as well as market risks emanating from the Chinese real estate market are currently considered to be the most relevant.

General inflation and falling incomes in real terms are continuing to exert a negative impact on consumer sentiment. A recovery in the consumer clothing market, which is important for Lenzing, will also depend on a further normalization of stock levels.

The currency environment is expected to remain volatile in regions relevant to Lenzing.

In the trend-setting market for cotton, a stable price trend is expected for the 2023/2024 harvest season.

Earnings visibility remains limited overall.

Revenue and earnings in the first quarter exceeded Lenzing’s expectations, despite the persistently difficult market. Lenzing is ahead of schedule with the implementation of its performance program. By appointing a separate Managing Board member, the projects identified to date are to be implemented even more rapidly, and new potentials are to be leveraged. Lenzing expects that these measures will increasingly contribute to further earnings improvement over the coming quarters compared to the first quarter of 2024.

Taking the aforementioned factors into consideration, the Lenzing Group confirms its guidance for the 2024 financial year of year-on-year higher EBITDA.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the transformation from a linear to a circular economy model.

Meisheng Group has started up a new ANDRITZ needlepunch line at its facility in Shaoxing City, Zhejiang Province, China. It is the third line supplied by ANDRITZ to the manufacturer of high-end nonwoven synthetic leather. This expansion will enable Meisheng to address the growing demand for synthetic suede in the automotive industry, particularly for New Energy Vehicles (NEVs).

The advanced line is equipped with a ProWid™ system that allows Meisheng to ensure an optimum web weight regularity across the full product width. As a result, the web distribution is improved, which reduces material consumption (fibers) and improves web weight evenness (CV%) – factors that are particularly important in synthetic leather manufacturing for automotive applications.

adidas introduces its 15-piece SS24 Paris Collection ahead of the 2024 clay season. Built to help players adapt to clay court conditions, the collection includes a core 8-piece range of apparel and footwear to help raise awareness of adidas’ annual Move For The Planet activation.

Designed to be played in seasonably warm Parisian temperatures, the collection features HEAT.RDY technology – breathable and lightweight fabrics that maximize airflow, to help keep players feel comfortable on court. Meanwhile increased mobility is unlocked thanks to adidas’ FreeLift Construction – a paneled fabric structure under the armpits – that enables greater freedom of arm movement during play while preventing the hems from riding up.

The pieces have been intentionally paired back, using zero prints to allow other bolder design features to make maximum impact, through striking color blocking, engineered paneling and textured fabrics. White and black panels on the garments emulate classic tennis court lines, highlighted by black bonding seams, meanwhile a stimulating Orange ‘Spark’ is used throughout to foster a sense of joyful energy for players during high-pressure games.

The collection will be worn by athletes including Caroline Wozniacki , Elina Svitolina, Xinyu Wang, Dana Mathewson, Jessica Pegula, Maria Sakkari, Stefanos Tsitsipas , Felix Auger Aliassime, Jason Wu and Martin de la Puente.