From the Sector

Reset
15 results
(c) Zünd Systemtechnik AG
09.02.2024

Zünd auf der Fespa

Zünd ist vom 19. bis 22. März auf Europas führender Messe für den digitalen Grossformatdruck, der Fespa Global Print Expo in Amsterdam vertreten.

Zünd zeigt, wie leistungsstarke Schneidtechnologie in Verbindung mit intelligenter Software und diversen optionalen Lösungen für das automatisierte Materialhandling den digitalen Zuschnitt effizient und rentabel gestalten. Unabhängig von ihrer Unternehmensgröße verlängern Werbemittelhersteller mit den Schneidlösungen die Betriebszeiten und senken gleichzeitig die Betriebskosten. Damit kann die Gesamtwirtschaftlichkeit des Zuschnitts nachhaltig erhöht werden.

Das Produktsortiment ist sehr modular aufgebaut und erlaubt es, einen Cutter mit wachsenden Anforderungen einfach und schnell mit Werkzeugen und Materialhandlingoptionen nachzurüsten und auf individuelle Anforderungen massgeschneidert zu konfigurieren.

Zünd ist vom 19. bis 22. März auf Europas führender Messe für den digitalen Grossformatdruck, der Fespa Global Print Expo in Amsterdam vertreten.

Zünd zeigt, wie leistungsstarke Schneidtechnologie in Verbindung mit intelligenter Software und diversen optionalen Lösungen für das automatisierte Materialhandling den digitalen Zuschnitt effizient und rentabel gestalten. Unabhängig von ihrer Unternehmensgröße verlängern Werbemittelhersteller mit den Schneidlösungen die Betriebszeiten und senken gleichzeitig die Betriebskosten. Damit kann die Gesamtwirtschaftlichkeit des Zuschnitts nachhaltig erhöht werden.

Das Produktsortiment ist sehr modular aufgebaut und erlaubt es, einen Cutter mit wachsenden Anforderungen einfach und schnell mit Werkzeugen und Materialhandlingoptionen nachzurüsten und auf individuelle Anforderungen massgeschneidert zu konfigurieren.

More information:
Fespa Zünd Systemtechnik AG
Source:

Zünd Systemtechnik AG

Foto Zünd Systemtechnik AG
30.01.2024

Zünd: Niederlassung in Brasilien

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Source:

Zünd Systemtechnik AG

ZCC Zünd Cut Center (c) Zünd Systemtechnik AG
ZCC Zünd Cut Center
01.09.2023

ZCC Zünd Cut Center: Neuer automatisierter Zuschnitt

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Dank ihrer Client-Server-Architektur ist Zünd Cut Center flexibel skalierbar. Diese Modularität ermöglicht auf spezifische Produktionsanforderungen zugeschnittene Konfigurationen. Der Anwender erwirbt nur jene Softwarekomponenten, die er benötigt und kann jederzeit weitere Optionen hinzufügen.

ZCC Zünd Cut Center
Zünd bietet das ZCC in zwei verschiedenen Editionen an. Zünd Cut Center Basic ist geeignet für alle, die aufgrund ihrer Produktionsumgebung Funktionen wie einen automatischen Datenimport, eine Auftragsliste oder einen Datenaustausch mit anderen Systemen nicht benötigen. Mit ZCC Zünd Cut Center Basic kann der Bediener Quelldateien manuell über den Cut Editor in .zcc-Dateien umwandeln und als Produktionsdatei im Cut Center öffnen.

ZCC Zünd Cut Center Advanced ist die passende Edition für alle Anwender mit einem höheren Auftragsvolumen und dem Wunsch, durch automatisierte Abläufe die Produktivität zu steigern. Sie haben mehrere Zünd Cutter parallel im Einsatz und wollen zwecks Datenaustausch auch andere Produktionssysteme in den Workflow integrieren. In der Advanced-Edition stehen der Anwenderin Funktionen wie die Auftragsliste, Angaben zur geschätzten Produktionszeit, der Import über Hotfolder oder E-Mail-Benachrichtigungen zur Verfügung.

Für beide Editionen können Softwareoptionen wie Camera Option, Pick & Place Option, Visualizing Option und Routing Option individuell erworben werden.

Source:

Zünd Systemtechnik AG

(c) Kornit Digital
09.06.2023

Kornit Digital presents Enhanced Presto MAX at ITMA

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

At ITMA 2023, Kornit will also be displaying an end-to-end partner ecosystem – underscoring how integrated solutions ensure a smooth transition towards a digital infrastructure and enable long-term business growth. Highlighting the power of partnership alongside Kornit is Greentex.co, a supplier of textiles and apparel leveraging digitally enabled, eco-friendly waterless printing. The company will be showing Presto MAX with fabrics highlighting the depth of black inks. Working alongside Kornit, Zünd will demonstrate how its modular cutting systems is the foundation for an end-to-end “eco factory,” completing fashion decorated by Presto MAX with their digital cutting solutions. Pentek Textile Machinery joins to display the possibilities for inline, sustainable softening of fabrics for unique and demanding applications.

(c) Zünd Systemtechnik AG
14.04.2023

Zünd auf der Interzum 2023

Zünd, ein Spezialist für Zuschnittlösungen für die Polstermöbelindustrie, stellt unter dem Motto «Efficiency to rely on» auf der Interzum 2023 (09.–12.05.2023) die Produktivität und Zuschnitteffizienz in den Fokus.

Am Stand erfährt das Fachpublikum die Vorteile des integrierten Lederzuschnitts am Beispiel eines Zünd D3 Cutters mit Doppelbalkentechnologie. Zünd widmet seinen Messeauftritt sämtlichen Prozessen zwischen Hauterfassung, Zuschnitt und Absortierung. Das Fachpublikum kann sich über modulare Lösungen für die Digitalisierung und das Nesting, den Textil- und Lederzuschnitt und softwareunterstützte Teileentnahme informieren.

Darüber hinaus rückt Zünd seinen integrierten Beratungsansatz in den Vordergrund: «Wir bieten Workflowlösungen für unterschiedlichste Anforderungen und erarbeiten individuell mit unseren Kunden, welche Lösungen am besten zu ihren Herstellungsprozessen und verwendeten Materialien passen. Das bedingt einen einheitlichen Beratungsansatz, der Hardware, Software und Servicedienstleistungen einbezieht», erklärt Manuel Enriquez, Segment Manager Leder.

Zünd, ein Spezialist für Zuschnittlösungen für die Polstermöbelindustrie, stellt unter dem Motto «Efficiency to rely on» auf der Interzum 2023 (09.–12.05.2023) die Produktivität und Zuschnitteffizienz in den Fokus.

Am Stand erfährt das Fachpublikum die Vorteile des integrierten Lederzuschnitts am Beispiel eines Zünd D3 Cutters mit Doppelbalkentechnologie. Zünd widmet seinen Messeauftritt sämtlichen Prozessen zwischen Hauterfassung, Zuschnitt und Absortierung. Das Fachpublikum kann sich über modulare Lösungen für die Digitalisierung und das Nesting, den Textil- und Lederzuschnitt und softwareunterstützte Teileentnahme informieren.

Darüber hinaus rückt Zünd seinen integrierten Beratungsansatz in den Vordergrund: «Wir bieten Workflowlösungen für unterschiedlichste Anforderungen und erarbeiten individuell mit unseren Kunden, welche Lösungen am besten zu ihren Herstellungsprozessen und verwendeten Materialien passen. Das bedingt einen einheitlichen Beratungsansatz, der Hardware, Software und Servicedienstleistungen einbezieht», erklärt Manuel Enriquez, Segment Manager Leder.

Source:

Zünd Systemtechnik AG

(c) Zünd Systemtechnik AG
06.04.2023

ITMA 2023: Zünd presents digital single- ply cutting

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

Zünd's single-ply cutters are the cutting tools in digitized production, offering manufacturers flexibility and profitability. Intelligent automation functions, optical solutions and software tools facilitate resource optimization, keep an eye on material consumption and support employees who can turn their attention to value-adding activities. With digital single-layer cutting, manufacturers speed up their cutting and expand their production capacities at the same time. They can accept orders at very short notice and easily meet delivery times thanks to highly economical and efficiently scalable on-demand production. Peaks in demand can be easily managed.

Zünd cutters give users new flexibility in their production workflow. He can work with complex motifs, demanding textiles and different shapes. The cutting technology enables the apparel industry to produce highly individualized customized garments in small batches and on demand just as economically and efficiently as in high volumes. It can process and handle more orders in less time. At the same time, both material and time are saved. In combination with the MindCut production software and precise single-layer cutting, there is almost no waste. The cut parts can be nested very close to each other and close to the material edges. This not only offers considerable savings potential, but also helps to reduce the ecological footprint.

Source:

Zünd Systemtechnik AG

Photo Pixabay
13.01.2023

Zünd: New subsidiary in Spain

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

Zund Ibérica currently employs 15 people. With more than 1,000 cutters installed, Zund Ibérica is one of the most experienced distributors of both digital cutting systems and software and workflow solutions on the Iberian market. It has its own showroom, which allows customers and interested parties to experience the many possibilities of Zünd’s digital cutting technology in person. Its staff consists of proven experts in consulting, training, installation, and service.

Source:

Zünd Systemtechnik AG

(c) Zünd Systemtechnik AG
25.10.2022

Zünd: Heat Sealing Module – HSM receives composites industry award

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

Source:

Zünd Systemtechnik AG

(c) Zünd Systemtechnik AG
22.04.2022

Zünd@Texprocess 2022 – #LetsTalkWorkflow

Zünd präsentiert auf der Texprocess in Frankfurt Softwaretools für jeden Teilprozess des Textilzuschnitts im Zusammenspiel mit leistungsstarken, auf Effizienz ausgerichteten digitalen Schneidsystemen.

Ein digitalisierter und automatisierter Produktionsworkflow ist entscheidend für die wirtschaftliche und standardisierte Textil- und Bekleidungsfertigung. Dies unterstützt Zünd durch vielseitige Automatisierungslösungen, die der Schweizer Gesamtlösungsanbieter für den Textilzuschnitt auf seinem Messestand in Frankfurt vorstellen wird. Sie helfen, die Aufbereitung von Druck- und Schneiddaten zu automatisieren und zu standardisieren, unterstützen bei der Produktionsüberwachung und -analyse, steuern den Zuschnitt und vereinfachen die Entnahme von Schnittteilen und die Logistik.

Zünd präsentiert auf der Texprocess in Frankfurt Softwaretools für jeden Teilprozess des Textilzuschnitts im Zusammenspiel mit leistungsstarken, auf Effizienz ausgerichteten digitalen Schneidsystemen.

Ein digitalisierter und automatisierter Produktionsworkflow ist entscheidend für die wirtschaftliche und standardisierte Textil- und Bekleidungsfertigung. Dies unterstützt Zünd durch vielseitige Automatisierungslösungen, die der Schweizer Gesamtlösungsanbieter für den Textilzuschnitt auf seinem Messestand in Frankfurt vorstellen wird. Sie helfen, die Aufbereitung von Druck- und Schneiddaten zu automatisieren und zu standardisieren, unterstützen bei der Produktionsüberwachung und -analyse, steuern den Zuschnitt und vereinfachen die Entnahme von Schnittteilen und die Logistik.

Die modular aufgebaute Software MindCut Studio enthält alle essenziellen Funktionen für jede Prozessphase der Textil- und Bekleidungsfertigung. Die Software erkennt zuverlässig die Stoffmusterung und Materialverzug, kompensiert diesen und verschachtelt die Schnittteile platz- und materialsparend auf dem Textil. Angesichts steigender Materialkosten ist die maximale Materialausnutzung von zentraler Bedeutung. Die Software bietet flexibel die passsende Variante für den Musterabgleich, unabhängig davon, ob das Textil gestreift, kariert oder digital bedruckt ist.

Für eine effiziente Teileentnahme müssen fertig geschnittene Teile schnell und eindeutig identifizierbar sein. Projizierte Farbcodes und Teileinformationen unterstützen den Bediener beim Absortieren. Und schliesslich wird auch die Teileentnahme mittels Projektion und Monitoranzeige visuell unterstützt.  

Zünd Cutter sind fixer Bestandteil in integrierten Produktionsprozessen. Damit können Bekleidungs- und Möbelhersteller Prozesse automatisieren und gleichzeitig den Datenfluss optimieren. Das Resultat sind deutlich höhere Durchsätze, niedrigere Fehlerquoten und Arbeitskosten, was zu einer deutlich gesteigerten Wettbewerbsfähigkeit beiträgt. Dem Messepublikum stellt Zünd seinen D3 Cutter mit zwei Produktionsbalken vor. Die Balken können jeweils mit bis zu drei verschiedenen Modulen ausgerüstet werden, wodurch sich der Materialdurchsatz massiv erhöht. Die intelligente Cutter-Steuerung verteilt die Aufträge optimal und sorgt so für maximale Produktivität.

Source:

Zünd Systemtechnik AG

(c) Zünd Systemtechnik AG
16.02.2022

Zünd: Award-winning software tools for automated cutting

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd is known worldwide for its advanced, high-performance digital cutting systems «made in Switzerland». For some time now, the Swiss manufacturer has also been making a name for itself with user-friendly automation software such as PrimeCenter for prepress, as well as the Visualizing Option and the Pick&Place Interface Option for digital production. The latter are two highly effective solutions for removing/unloading cut parts, offering visual support and robot integration, respectively. On account of its exceptional know-how and consulting expertise,

  • PrimeCenter automation software serves as control center for creating print & cut files and enables a highly efficient and productive prepress workflow. In a few clicks, users create fully nested print & cut jobs.
     
  • The Pick&Place Interface Option lets Zünd Cut Center – ZCC control a robotic device, enabling fully automated parts removal—picking, sorting, and placing at pre-defined locations.
     
  •  The Visualizing Option provides visual support for parts removal. Cut parts are labeled via projection or monitor. The user is able to see at a glance which parts belong to which job and can apply labels for continuous Track&Trace.

For more than ten years, EDP has been evaluating products and developments in the graphics industry for excellence and for commendation through an evaluation process involving the EDP technical committee, a jury of experts, and finally, a general award assembly of EDP members.

Source:

Zünd Systemtechnik AG

Zünd and Airborne Sign Distribution Agreement (c) Zünd Systemtechnik
Swiss cutting system manufacturer Zünd Systemtechnik and Dutch composite automation company Airborne have signed a distribution agreement.
26.01.2022

Zünd and Airborne Sign Distribution Agreement

Swiss cutting system manufacturer Zünd Systemtechnik and Dutch composite automation company Airborne have expanded their collaboration. As a result of a new distribution agreement, customers will be able to benefit from state-of-the-art digital production solutions for automated processing of composite materials. Zünd and Airborne will jointly promote these production solutions through their sales and servicing networks.

Both companies are technology leaders offering solutions for composites manufacturing and processing – Zünd develops and manufactures digital flatbed cutting systems capable of processing reinforced fiber materials such as CFRP or GRP. Airborne, based in Den Haag in the Netherlands, provides fully integrated automation solutions for efficient composites processing.
 
The goal of this partnership is to make it easier than ever for customers to access state-of-the-art digital cutting and automation solutions. In that endeavor, the competencies of both companies complement each other perfectly. Their combined expertise manifests itself especially in the areas of fully automated cutting, preforming, offloading and sorting.

Swiss cutting system manufacturer Zünd Systemtechnik and Dutch composite automation company Airborne have expanded their collaboration. As a result of a new distribution agreement, customers will be able to benefit from state-of-the-art digital production solutions for automated processing of composite materials. Zünd and Airborne will jointly promote these production solutions through their sales and servicing networks.

Both companies are technology leaders offering solutions for composites manufacturing and processing – Zünd develops and manufactures digital flatbed cutting systems capable of processing reinforced fiber materials such as CFRP or GRP. Airborne, based in Den Haag in the Netherlands, provides fully integrated automation solutions for efficient composites processing.
 
The goal of this partnership is to make it easier than ever for customers to access state-of-the-art digital cutting and automation solutions. In that endeavor, the competencies of both companies complement each other perfectly. Their combined expertise manifests itself especially in the areas of fully automated cutting, preforming, offloading and sorting.

Airborne’s automated kitting solutions reduce operating costs by maximizing material yield through optimized nesting. At the same time, they resolve the challenges inherent in sorting and grouping cut parts from complex nested layouts into laminate-ready kits with minimal operator intervention. Airborne offer a portfolio of solutions tailored to meet the individual needs of customers from affordable entry-level semi-automated products through to fully integrated and high productivity systems. All systems are "plug and play" and require no additional special programming. Airborne’s software generates the required robotics code directly from information derived from the nesting data and permits static or dynamic nesting and a sorting solution that adapts “on the fly”.

Zünd has been designing, manufacturing, and marketing digital cutting systems for more than 30 years. Zünd high-performance modular cutters are now in use all over the world. The Swiss family-owned company now in its second generation has established a global network of Zünd sales and service organizations under the leadership of Oliver Zünd. “This is a situation where two strong partners complement each other in much the same way as in strong partnerships we have established in other industries. It is a continuation of a long-standing company strategy. Airborne has excellent know-how in developing and manufacturing automated solutions for processing composites. Together we can offer our customers state-of-the-art technology and provide a technological answer to the growing demand for high-performance, innovative production systems in the composites market."

Joe Summers, Commercial Director for Airborne agrees: "Our partnership with Zünd brings a great deal of added value to our customers. Zünd shares our goal of creating greater cutting-room productivity. The Zünd cutter is key to converting materials with the greatest possible efficiency and maximum material usage."

Source:

Zünd Systemtechnik AG

19.01.2022

Zünd at JEC World 2022

  • Smart Workflows for Digital Cutting & Kitting

At JEC World 2022 in Paris, Zünd presents the latest developments in modular cutting solutions for composites. Known for its expertise in digital cutting and workflow integration.
As specialist in digital cutting for composites applications, Zünd demonstrates how data management, digital cutting, and downstream processes such as picking, sorting, and kitting, can be automated intelligently and based on specific needs.

In Industry 4.0 in general and processing composites in particular, an unencumbered flow of data is key to workflow efficiency. With Zünd PreCut Center, the user is well equipped to handle the challenges of demanding manufacturing processes. The software automatically optimizes contours and adjusts cut paths depending on the material and choice of tools. With the integrated nesting function, parts are laid out automatically for optimal material utilization. Considering the high cost of materials, maximum yield is essential for economical digital cutting.

  • Smart Workflows for Digital Cutting & Kitting

At JEC World 2022 in Paris, Zünd presents the latest developments in modular cutting solutions for composites. Known for its expertise in digital cutting and workflow integration.
As specialist in digital cutting for composites applications, Zünd demonstrates how data management, digital cutting, and downstream processes such as picking, sorting, and kitting, can be automated intelligently and based on specific needs.

In Industry 4.0 in general and processing composites in particular, an unencumbered flow of data is key to workflow efficiency. With Zünd PreCut Center, the user is well equipped to handle the challenges of demanding manufacturing processes. The software automatically optimizes contours and adjusts cut paths depending on the material and choice of tools. With the integrated nesting function, parts are laid out automatically for optimal material utilization. Considering the high cost of materials, maximum yield is essential for economical digital cutting.

With Pick&Place, Zünd presents a cost-effective solution for fully automated picking and kitting of cut parts. The Pick&Place interface enables direct communication with the robot via Zünd Cut Center – ZCC, the Zünd operating software and user interface. Pick&Place makes it possible to completely automate parts removal, kitting and placing. The necessary parameters are derived from the metadata supplied with the job order.

Source:

Zünd Systemtechnik AG

Zünd: Automatic production monitoring for cutting with Zünd Connect (c) Zünd Systemtechnik AG
02.09.2021

Zünd: Automatic production monitoring for cutting with Zünd Connect

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

The web-based monitoring tool gives the user access to cutter- performance data at a glance, any time of day. Reliable key performance indicators are available at all times to help users maximize productivity. The system records productivity levels over a freely definable period using Zünd Cut Center – ZCC (Version 3.4 or later) as data source. Data monitoring provides information users need in order to make informed decisions. This comprehensive overview of production data reveals connections that are often overlooked. Zünd Connect supplies valuable key performance indicators for assessing how efficiently cutting systems are working. To be able to improve cutter efficiency, potential areas of improvement must be uncovered and recognized. This potential lies primarily in the technology but also in the way it is being used.

Zünd Connect is available in a "Monitor" or an "Analyzer" version.

Source:

Zünd Systemtechnik AG 

(c) Zünd Systemtechnik AG
09.06.2021

Automation made smarter - Zünd launches Cradle Feeder 100

Having undergone further development, the new cradle feeder 100 now offers more functions and is even smarter. The cradle feeder 100 comes with an integrated cut-off system, intelligent controls, and smart roll-off features that take textile cutting to new levels of productivity and automation.

Just like its highly successful predecessor, which was introduced in 2017, the cradle feeder 100 is capable of advancing stretch fabrics from rolls completely without tension and resulting distortions. The integrated unwind-control system continuously monitors the rate in which the material is fed onto the cutter and manages that process with even greater precision than the previous model.

Having undergone further development, the new cradle feeder 100 now offers more functions and is even smarter. The cradle feeder 100 comes with an integrated cut-off system, intelligent controls, and smart roll-off features that take textile cutting to new levels of productivity and automation.

Just like its highly successful predecessor, which was introduced in 2017, the cradle feeder 100 is capable of advancing stretch fabrics from rolls completely without tension and resulting distortions. The integrated unwind-control system continuously monitors the rate in which the material is fed onto the cutter and manages that process with even greater precision than the previous model.

At the heart of the technological advances that come with new feeder is the optional integrated cut-off feature. It slices through the material at the end of a marker even while the cutter is still busy cutting. This makes it possible to switch rolls and prepare for the next job without interrupting the production process. Especially for users who frequently need to process short markers, this translates into significant time-savings in job preparation and setup. The cut-off function can be initiated manually by the user or set to occur automatically in the cutter software.

More information:
Zünd Systemtechnik AG
Source:

Zünd Systemtechnik AG

(c) eurolaser
30.09.2019

eurolaser at FILTECH 2019

At FILTECH, eurolaser will demonstrate the advantages of a large-format laser system in the processing of filter material. The handling of the material from the roll is particularly comfortable with eurolaser's own conveyor system in combination with a feeding unit. At the FILTECH, eurolaser presents its L-3200 with a table size of 1,800 x 3,200 mm.

Large-format laser systems are ideal for cutting of filter material. The contactless process guarantees a constant cutting quality without tool wear. The table concept with extraction reduces dust and keeps the material in place at the same time. In addition, the thermal laser process ensures that when cutting synthetic textiles, the edges are sealed and thus protected from fraying. This makes subsequent processing much easier. The laser also allows fine details and filigree structures which cannot be produced by a knife.

At FILTECH, eurolaser will demonstrate the advantages of a large-format laser system in the processing of filter material. The handling of the material from the roll is particularly comfortable with eurolaser's own conveyor system in combination with a feeding unit. At the FILTECH, eurolaser presents its L-3200 with a table size of 1,800 x 3,200 mm.

Large-format laser systems are ideal for cutting of filter material. The contactless process guarantees a constant cutting quality without tool wear. The table concept with extraction reduces dust and keeps the material in place at the same time. In addition, the thermal laser process ensures that when cutting synthetic textiles, the edges are sealed and thus protected from fraying. This makes subsequent processing much easier. The laser also allows fine details and filigree structures which cannot be produced by a knife.

Conveyor – for all materials from the roll
Especially for all materials from the roll, eurolaser offers several of its systems as conveyor versions. In these versions, the surface of the processing tables consists of a stainless steel rod mesh. They are equipped with an automatic unwinding unit as fabric feed. The unwinding speed adapts to the retraction of the conveyor and the decreasing roll diameter. For very large and heavy rolls there is also a driven unwinding unit. Integrated laser projection lines indicate the correct position so that the roll change is fast and error-free. The remaining length capture ensures that there is always enough material left on the roll for the respective job.

For even more flexibility, there is space for additional tools or marking modules next to the laser. The motion system comes from the Swiss world market leader for digital cutters ZÜND. The machines are equipped with the Laserscout software suite, which contains the right software packages tailored to the application.

More information:
eurolaser FILTECH
Source:

eurolaser GmbH