From the Sector

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

• “the preciousfabric that naturally stretches without tricks”

Bemberg™ Natural Stretch, the ground-breakingprecious fabric by Gianni Crespi Foderami s.r.l. is the 100% sustainable lining fabric created from a cutting-edge highly engineered process Specialized  in  the  creation  of linings for high quality menswear,   womenswear   and childrenwear,  Gianni  Crespi Foderami  s.r.l.has  teamed  up with Bemberg™, the Japanese brand of regenerated cellulose fibers by leading    materials manufacturer  Asahi  Kasei, to develop a precious 100% Bemberg™ lining with outstanding stretch performance  woven in its DNA.

Bemberg™ Natural    Stretch was   achieved   thanks   to the leading  Italian  manufacturer’s ability  to  vertically  set  up,  control,  engineer  and  design  a  whole  integrated  production process, ranging from sectional warping the shipment service.Bemberg™  Natural  Stretch  achieve  maximum  flexibility,  resistance,  and  comfort  without the use of elastomers and polyesters. How? The secret is in the process indeed.Elasticity is achieved thanks to a complex way of yarn twisting, weaving, and finishing.Bemberg™  yarns  are  smart,  responsible  and  high-tech.  Made  from  a  cotton  linter  bio-utility material,  the  natural  derived  source  does  not  deplete  forestry  resources. 

The company’s matchless, high-tech natural fibers are characterized by a unique touch and feel as well as unique performances such as moisture control and is antistatic.Bemberg™Natural Stretch: a smart solution for contemporary living.

• Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
• In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

• Technical Absorbents Limited (TAL) has developed a new grade of superabsorbent fibre (SAF) specifically for use within a new range of SAF nonwoven fabrics that are more resistant to shrinkage.

The new SAF was developed in response to the demand from the medical industry for a superabsorbent fabric suitable for use in advanced wound pad dressings. The fibre had to be capable of withstanding the moisture used in the EtO sterilization process that is frequently employed in the production of the pads, in order to ensure product safety and compliance.

EtO sterilization is a low-temperature process (typically between 37 and 63°C) that uses ethylene oxide gas to reduce the level of infectious agents. While generally applied in gas form, however, the EtO is usually mixed with other substances – and often steam.

“Obviously superabsorbents and moisture generally aren’t a good combination at this stage in processing and can cause problems,” says TAL Product Development Director Dr Mark Paterson. “Other methods can be used, but when silicone materials are included, which is more frequently becoming the case, EtO is the preferred treatment method. Regular SAF grades tend to shrink a little and can become hard, which is often not desirable. This innovative SAF grade significantly reduces such potential problems.”

The amount of shrinkage caused by EtO sterilization depends very much on the product design and construction, he adds, but in general, the new SAF has been tested and proven to reduce fabric shrinkage by around 70%. It is suitable for use in all SAF nonwoven formats, whether needlepunched, thermally bonded or airlaid.

While the proprietary process developed at TAL for the production of this new fibre and resulting fabrics was prompted by the specific requirements of wound pad dressings, TAL sees opportunities for its application in other areas as well.

“It’s an extremely flexible fibre that can be easily switched with existing SAF grades when manufacturing fabrics and we have a number of current projects in which we’re exploring other end-uses,” Mark concludes. “We believe this new range could also open up entirely new application areas on the market.”

• Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
   

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

“Tragedies have unfolded across the globe, affecting different countries at varying degrees. The second waves of COVID-19 are just appearing on the horizon. This long-lasting surface treatment is a viable, accessible solution across cultures. By killing the COVID-19 pathogen on surfaces before it can infect people, the Si-Quat solution is a game changer. It can provide increased security and peace of mind to your communities, as well as your customers,” says Tom Sam, CEO of AFFIX Labs.

Si-Quat has been tested to kill 99.99% of microbes within minutes, while still being fully safe to touch. Proven to be effective for about a month on frequently touched surfaces, it is the longest lasting anti-viral surface treatment available to reduce the spread of the novel coronavirus. The product is non-corrosive, free from silver salts and heavy metal nanoparticles, and perfectly safe to touch.

Several major agencies around the globe have already accepted quaternary ammonium, the main ingredient in the surface coating, to be an effective surface treatment against the novel coronavirus, including the World Health Organization (WHO), the US Environmental Protection Agency, the American Chemistry Council (ACC) and the European Chemical Agency (ECHA).

Si-Quat was invented in January 2020 by the AFFIX Labs’ Repeltec development team to specifically help combat the COVID-19 outbreak. The product is based on the trusted and safe disinfectant quaternary ammonium, which is chemically bound to align silane quaternary ammonium molecules (silane quats) in a highly effective manner. Positively charged nitrogen particles then actively attract viruses and bacteria, penetrating the membranes and killing them within minutes.

Rigorous testing has shown Si-Quat to adhere to almost any surface, performing as the most durable surface treatment commercially available. Due to its incredibly strong layer, the solution only wears down on surfaces after thousands of touches or multiple cleaning cycles. This means that on heavily used surfaces, such as door handles and counters, Si-Quat will be effective for about a month. On rarely touched surfaces like walls, it has the potential to protect for years. Since the product is incredibly easy to apply, technicians require minimal training and only basic protection. They simply have to brush or spray Si-Quat onto the surface and allow it to dry for 6 hours.

“Other sanitising solutions require reapplication to every surface several times daily, interrupting business operations. This results in additional costs and disruptions at a time when many companies are already struggling,” Sam explains. “By combining proven efficacy, safety and long durability, Si-Quat is emerging as an important weapon in the battle against the spread of COVID-19.”

AFFIX Labs has begun to roll out the distribution of Si-Quat across the globe, with new regions being serviced every week. It is currently looking for distribution partners in local markets.

The project leading to the development of Si-Quat included funding from the European Institute of Innovation and Technology, a body of the European Union, under the Horizon 2020 Framework for Research and Innovation.

For the third time in a row, the Lenzing Group was awarded gold status in the EcoVadis CSR rating. The assessment is further evidence that the company is one of the top performers in the field of sustainability worldwide.

Lenzing is thus one of the leading two percent of all assessed companies in its industry.
The assessment covers the four most important CSR (Corporate Social Responsibility) practices:

• environment
• fair working conditions and human rights
• ethics and sustainable procurement

“This award makes us very proud and encourages us to continue on our path to becoming a provider of environmentally friendly specialty fibers. At Lenzing, we look beyond fibers and take responsibility for our children and grandchildren by
standing up resolutely against the shortcomings of our time. This attitude is part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and society”, says Stefan Doboczky, CEO of the Lenzing Group.

Lenzing’s ambitious climate target represents an important component of the company’s strategy and the responsibility towards future generations. In the 2019 financial year, Lenzing became the world’s first producer of wood-based cellulosic fibers to strategically commit to a climate-neutral production. This vision is to be put into practice by 2050. By 2030, the company aims to achieve an interim goal of reducing emissions by 50 percent per ton of product compared to 2017.

In 2019, Lenzing was once again rated number one in the world in the “Hot Button Report” of the Canadian NGO Canopy, another highly regarded ranking. In this ranking, Canopy grades the world’s 32 largest producers of wood-based fibers with respect to their success in achieving sustainable wood and pulp sourcing.

HANRO chooses Iluna lace containing the sustainable premium stretch fiber ROICA™ by Asahi Kasei for its Zula lingerie set

HANRO, the Swiss brand that produces high quality daywear, nightwear and loungewear for both men and women and world’s leading premium brand in its segment, chooses Iluna Group for its advanced design and sustainability, innovation, aesthetics and quality made of “ethical” laces and an attentive look at fashion.

Iluna uses responsible premium ingredients such as GRS certified Q-NOVA®, more than half of which are made from pre-consumer waste and GRS certified ROICA™ EF premium stretch yarn produced by more than 58% from transformed pre-consumer content. The yarn belongs to the ROICA Eco-Smart™ family produced by Asahi Kasei and it’s the world’s first responsibly made premium fiber range, which includes smart ROICA™ yarns and their exceptional certifications.

Seductive and luxurious lingerie defines the SS 20 Zula collection in which we find Iluna lace. This lingerie set is smooth and soft satin viscose made, with an elegant Jacquardtronic lace detail along the cup, straps and band of the bra. It is paired to the matching briefs in the collection with generous elegant Jacquardtronic lace on the front and the backside. The particular lace used is a delicate and modern reinterpretation of the Duchesse lace, a particular type of Brussels lace from the mid-19th century. The set is available in light viola, purple night and marzipan range of colours.

The PREMIUM GROUP and its partner, JOOR, the largest B2B wholesale platform in the world, have together developed a digital marketplace showcasing a curated portfolio of brands compiled in partnership with the relevant retailers. The first digital trade show in the world launches on 14 July 2020: PREMIUM+SEEK Passport.

The JOOR Passport platform is geared towards the current market conditions, where only limited travel is permitted, as well as towards the time after the pandemic when physical events will be able to take place again.

The trade show experience is condensed into a one-stop shop for users: one website, one app to search for and find suppliers, and one place to upload and access data and content – in short, one comprehensive digital experience.

The digitalisation of business interactions represents a year-round marketplace where retailers can discover new styles and designers, and brands can generate new contacts.

On the summer trade show dates the seasonal brand lookbooks curated by PREMIUM and SEEK can be uploaded to individual profiles and key looks can be presented in virtual showrooms. The PREMIUM GROUP translates the recipe for success – Commerce, Content and Community – for the digital sphere. Buyers can find out the latest on style and trend stories on the PREMIUM+SEEK Passport homepage, which also highlights key themes such as sustainability. This enables retailers to continue to gain inspiration from brand worlds, to keep abreast of developments and discover new things.

• R&D support for textile odor-management according to international testing standards

To ensure responsible use of biocides and international comparability, test methods and test results for antimicrobial treated products must be transparent, useful and comparable. This is precisely why  SANITIZED AG, the specialist for antimicrobial material protection and hygiene function in textiles and polymers, had its in-house Microbiology Laboratory in the SANITIZED TecCenter certified by IAC, the International Antimicrobial Council. This non-profit, U.S.-based institute aims to increase safety for antimicrobial treated products and for consumers. Textile and polymer product manufacturers value the assistance that the in-house SANITIZED TecCenter provides them with developing and optimizing their products. It supervises technical application aspects, and conducts microbiological tests and analytics—all from a single source. SANITIZED provides specific assistance with the textile manufacturer's R&D work, particularly for the demanding challenge of developing the best possible odor-management for textiles. Now the TecCenter has been certified by the IAC and is a designated “International Antimicrobial Council Certified Laboratory.”

Thanks to the IAC Certification, SANITIZED AG now offers innovation expertise according to international standards that are also recognized and valued in the U.S. and Asia.

“In addition to assistance with product development and product optimization from our TecCenter, SANITIZED customers receive certification of the antimicrobial treatment of their products from an independent organization, the IAC,” explains Erich Rohrbach, Head of Microbiology at SANITIZED AG. “This is an important building block for production chain transparency in the textile industry, which is demanded by a growing number of manufacturers and brands that are driven by end customer requirements,” adds Erich Rohrbach. Many SANITIZED customers particularly value the TecCenter for their development work in odor-management for textiles. SANITIZED offers an innovative product portfolio to meet this demand also including non-biocide additives.

• Australian production of medical masks to commence from April 2021 with Oerlikon Nonwoven meltblown technology

Neumünster/Germany, Brisbane/Queensland/Australia – Queensland company OZ Health Plus will establish Australia’s first manufacturing plant to make the critical fine plastic material used in most protective face masks. OZ Health Plus has purchased a plant of the Swiss-based technology company Oerlikon to establish a Queensland-based production plant for spun-bond and meltblown nonwovens. These fabrics are essential for Australia’s face mask manufac-turers, who currently produce about 500 million medical and industrial masks per year. However the fabrics have to be imported from overseas and access to these materials has been severely disrupted during the COVID-19 pandemic.

Oerlikon’s German-based business unit Oerlikon Nonwoven has now executed legal and commercial arrangements to supply the specialised machinery which can manufacture the nonwoven material lo-cally. The same machinery is used to make almost all face masks material manufactured in Europe. The world-leading Oerlikon Nonwoven meltblown plant will commence operations in April next year, with a second stage planned for late 2021.

The Oerlikon Nonwoven plant can produce meltblown fabrics for 500 million masks per year, along with other medical and non-medical grade products, filtration products, sanitary items, antiseptic wipes and more. Rainer Straub, Head of Oerlikon Nonwoven said: “We are very proud that we can now for the first time supply our Oerlikon Nonwoven meltblown technology to Australia. Due to the short delivery time, we hope to make our contribution to the Australian population and their safe sup-ply of high-quality protective masks as soon as possible.”

Queensland company secures manufacturing plant for the only Australian production of critical face mask material

OZ Health Plus director Darren Fooks said: “Australia has access to raw polypropylene feedstock but lacks the plant to convert that raw material to specialised spunbond and meltblown fabrics. These fabrics are essential for local mask manufacturing. The Australian-based Oerlikon Nonwoven plant will fill the production chain gap for Australia by producing the fabrics we need for mask production and many other products – it will reduce Australia’s protective mask supply chain from thousands of kilo-metres, to tens of kilometres.”

“Our decision in favor of Oerlikon Nonwoven was a given once we had analyzed the material samples. It was a matter of course for us that the Business Unit of the Oerlikon Manmade Fibers segment could supply high-quality machines and systems”, added Darren Fooks.

OZ Health Plus’ new facilities will take up 15,000 m2 of manufacturing space and will employ 100 full-time roles once the second stage of the project is complete. OZ Health Plus continues to work with both Queensland and Federal Government stakeholders and values their support in bringing this vital capability to Queensland.

Leading meltblown technology

Oerlikon Nonwoven meltblown technology, which can also be used to produce nonwovens for protec-tive masks, is recognized in the market as the technically most efficient method of producing high-separation filter media from plastic fibers. Most of the protective mask capacities available in Europe to date are produced on Oerlikon Nonwoven equipment.