From the Sector

Reset
69 results
Photo: AWOL
20.09.2022

Halley Stevensons: Unique waxed cotton finishing with new Monforts line

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

Fashion Revolution
19.08.2022

Results of the FASHION TRANSPARENCY INDEX 2022

The world’s largest fashion brands and retailers must increase transparency to tackle the climate crisis and social inequality, according to the latest Fashion Transparency Index.

The seventh edition of the Fashion Transparency Index ranks 250 of the world’s largest fashion brands and retailers based on their public disclosure of human rights and environmental policies, practices, and impacts, across their operations and supply chains.

  • Brands achieved an average score of just 24%, with nearly a third of brands scoring less than 10%
  • The majority of brands (85%) do not disclose their annual production volumes despite mounting evidence of clothing waste around the world
  • Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage

The Index reveals insights into the most pressing issues facing the fashion industry, like:

The world’s largest fashion brands and retailers must increase transparency to tackle the climate crisis and social inequality, according to the latest Fashion Transparency Index.

The seventh edition of the Fashion Transparency Index ranks 250 of the world’s largest fashion brands and retailers based on their public disclosure of human rights and environmental policies, practices, and impacts, across their operations and supply chains.

  • Brands achieved an average score of just 24%, with nearly a third of brands scoring less than 10%
  • The majority of brands (85%) do not disclose their annual production volumes despite mounting evidence of clothing waste around the world
  • Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage

The Index reveals insights into the most pressing issues facing the fashion industry, like:

  • As new and proposed legislation focuses on greenwashing claims, almost half of major brands (45%) publish targets on sustainable materials yet only 37% provide information on what constitutes a sustainable material.
  • Only 24% of major brands disclose how they minimise the impacts of microfibres despite textiles being the largest source of microplastics in the ocean.
  • The vast majority of major brands and retailers (94%) do not disclose the number of workers in their supply chains who are paying recruitment fees. This paints an unclear picture of the risks of forced labour as workers may be getting into crippling debt to accept jobs paying poverty wages.
  • While many brands use their channels to talk about social justice, they need to go beyond lip service. Just 8% of brands publish their actions on racial and ethnic equality in their supply chains.

Despite these results, Fashion Revolution is encouraged by increasing supply chain transparency among many major brands, primarily with first-tier manufacturers where the final stage of production occurs, e.g. cutting, sewing, finishing and packing. Nine brands have disclosed their first-tier manufacturers for the first time this year. It is encouraging to see significant progress across market segments including luxury, sportswear, footwear and accessories and across different geographies.

Fashion Revolution’s co-founder and Global Operations Director Carry Somers says: “In 2016, only 5 out of 40 major brands (12.5%) disclosed their suppliers. Seven years later, 121 out of 250 major brands (48%) disclose their suppliers. This clearly demonstrates how the Index incentivises transparency but it also shows that brands really are listening to the millions of people around the world who keep asking them #WhoMadeMyClothes? Our power is in our persistence.”

More key findings from the Fashion Transparency Index 2022:

Progress on transparency in the global fashion industry is still too slow among 250 of the world’s largest fashion brands and retailers, with brands achieving an overall average score of just 24%, up 1% from last year
For another year, the initiative has seen major brands and retailers publicly disclose the most information about their policies, commitments and processes on human rights and environmental topics and significantly less about the results, outcomes and impacts of their efforts.

Most (85%) major brands still do not disclose their annual production volumes despite mounting evidence of overproduction and clothing waste
Thousands of tonnes of clothing waste are found globally. However, brands have disclosed more information about the circular solutions they are developing (28%) than on the actual volumes of pre- (10%) and post-production waste they produce (8%). Brands have sat by as waste importing countries foot the bill, resulting in serious human rights and environmental implications.

Just 11% of brands publish a responsible purchasing code of conduct indicating that most are still reluctant to disclose how their purchasing practices could be affecting suppliers and workers
Greater transparency on how brands interact with their suppliers ought to be a first step towards eliminating harmful practices and promoting fair purchasing practices. The poor performance on transparency in this vital area is a missed opportunity for brands to demonstrate they are serious about addressing the root causes of harmful working conditions, including the instances where they themselves are the key driver.

Despite the urgency of the climate crisis, less than a third of major brands disclose a decarbonisation target covering their entire supply chain which is verified by the Science-Based Targets Initiative
Many brands and retailers rely heavily on garment producing countries that are vulnerable to the impacts of the climate crisis, yet our research shows that only 29% of major brands and retailers publish a decarbonisation target covering their operations and supply chain which is verified by the Science Based Targets Initiative.

Only 11% of brands publish their supplier wastewater test results, despite the textile industry being a leading contributor to water pollution
The fashion industry is a major contributor to water pollution and one of the most water intensive industries on the planet. Only 11% of major brands publish their wastewater test result, and only 25% of brands disclose the process of conducting water-related risk assessments in their supply chain. Transparency on wastewater test results is key to ensuring that brands are held accountable for their potentially devastating impacts on local biodiversity, garment workers and their communities.

Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage nor do they disclose if they isolate labour costs
Insufficient progress is being made by most brands towards ensuring that the workers in their supply chain are paid enough to cover their basic needs and put aside some discretionary income. Just 27% of brands disclose their approach to achieving living wages for supply chain workers and 96% do not publish the number of workers in their supply chain paid a living wage. In response, we have joined forces with allies across civil society to launch Good Clothes, Fair Pay. The campaign demands groundbreaking living wage legislation across the garment, textile and footwear sector.

 

Source:

Fashion Revolution

Foto: Unplash
10.08.2022

High-tech center for cotton processing and fiber-to-fiber recycling being built in Africa

IFFAC (Impact Fund for African Creatives) has revealed plans which will revolutionise West African textile and garment production at one stroke. The fund is converting a partially disused textile mill in the region into a hi-tech centre for processing local cotton and recycling waste fabric, to produce both fabric for further processing and new clothes. The mill will be equipped with modern equipment, all sustainably powered by hydroelectricity from the nearby Volta Dam.

West Africa grows about 6% of the world’s cotton but only a tiny fraction of that crop is processed on the continent, the vast majority being shipped thousands of miles to Asia before being shipped back again as finished or part-finished fabrics. The mill project will end the continent’s reliance on such an unsustainable practice with all the obvious financial and environmental benefits.

IFFAC (Impact Fund for African Creatives) has revealed plans which will revolutionise West African textile and garment production at one stroke. The fund is converting a partially disused textile mill in the region into a hi-tech centre for processing local cotton and recycling waste fabric, to produce both fabric for further processing and new clothes. The mill will be equipped with modern equipment, all sustainably powered by hydroelectricity from the nearby Volta Dam.

West Africa grows about 6% of the world’s cotton but only a tiny fraction of that crop is processed on the continent, the vast majority being shipped thousands of miles to Asia before being shipped back again as finished or part-finished fabrics. The mill project will end the continent’s reliance on such an unsustainable practice with all the obvious financial and environmental benefits.

As well as producing fabric from sustainably grown virgin cotton, a joint venture with Shandong-based WOL Textiles Ltd., a privately owned plant that has long supplied the African market, the mill will be home to a state-of-the-art shredding and recycling facility, a joint venture between IFFAC and the Dutch Circularity B.V. CEO Han Hamers of Circularity B.V. in The Netherlands, has been involved in the production of 100% circular knit and woven articles.

The mill project is expected to create over a thousand jobs. The surrounding area already boasts a significant number of experienced textile workers ready to be retrained on the new equipment. While the majority of the products created will be sold within the region, all processes will confirm to new EU Supply Chain Law to allow for the possibility of export.  

Output is forecast at six million pieces of finished clothing and twenty-five million metres of spun and woven cloth per year. In total, thirty million US$ of investment will be made in the site with operations ready to begin next year (2023).

More information:
IFFAC Africa Recycling
Source:

Circularity Germany GmbH i.G.

10.08.2022

‘MADE IN BANGLADESH WEEK’: 12th -18th November 2022, Dhaka

  • Made in Bangladesh Week is organized by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE)
  • A week-long event in November will showcase sustainability strides being made by Bangladesh garment makers
  • The event will host 17 physical events like - conferences, expositions, photo exhibitions, fashion runway shows, sustainable design and innovation awards, factory tours –and many more.

The Honourable Prime Minister of Bangladesh, Sheikh Hasina, will inaugurate the first ever Made in Bangladesh Week in November. The event represents a major branding exercise for Bangladesh’s burgeoning garment manufacturing industry as it looks to position itself as the first-choice apparel sourcing hub for global fashion retailers.

It is the first branding event of the Bangladesh Apparel Industry dedicated solely to celebrating and showcasing the newest innovations, compliance, and sustainable developments of the RMG sector in the global market.

  • Made in Bangladesh Week is organized by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE)
  • A week-long event in November will showcase sustainability strides being made by Bangladesh garment makers
  • The event will host 17 physical events like - conferences, expositions, photo exhibitions, fashion runway shows, sustainable design and innovation awards, factory tours –and many more.

The Honourable Prime Minister of Bangladesh, Sheikh Hasina, will inaugurate the first ever Made in Bangladesh Week in November. The event represents a major branding exercise for Bangladesh’s burgeoning garment manufacturing industry as it looks to position itself as the first-choice apparel sourcing hub for global fashion retailers.

It is the first branding event of the Bangladesh Apparel Industry dedicated solely to celebrating and showcasing the newest innovations, compliance, and sustainable developments of the RMG sector in the global market.

The event aims to promote the apparel industry of Bangladesh locally and globally by showcasing the compelling stories of the ready-made garments sector, especially its impressive strides in the areas of workplace safety, environmental sustainability and workers’ wellbeing.

The event is expected to draw a gathering of more than a thousand people from home and abroad, including key stakeholders in the local and global fashion industry.

Bangladesh’s garment manufacturing industry has undergone a renaissance in recent times. Significant strides have been made in technological innovation, eco-friendly production, worker welfare and factory safety.

In addition to panels, seminars, awards, fashion shows and exhibitions, the week will also provide an opportunity for factory tours to give journalists and other stakeholders a chance to see for themselves innovative garment production in Bangladesh.

Made in Bangladesh Week will be organised by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE).

More information:
Bangladesh
Source:

Bangladesh Apparel Exchange (BAE)

10.08.2022

Launch of international in-store collection program at Mustang

Today’s system of «take – make – waste» needs to change. New textiles are produced used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID continues to expand its offering for in-store collection programs throughout Europe and the USA.

TEXAID is partnering with Mustang to offer an in-store collection program. At scale and paired with TEXAID, in-store collection of used clothing enables conservation of resources because it allows items to be directly sorted for their next and most environmentally friendly lifecycle. This service can now be found in over 70 Mustang stores across Germany, Austria, Belgium, Switzerland, Czech Republic, France, Hungary, the Netherlands, and Poland.

Today’s system of «take – make – waste» needs to change. New textiles are produced used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID continues to expand its offering for in-store collection programs throughout Europe and the USA.

TEXAID is partnering with Mustang to offer an in-store collection program. At scale and paired with TEXAID, in-store collection of used clothing enables conservation of resources because it allows items to be directly sorted for their next and most environmentally friendly lifecycle. This service can now be found in over 70 Mustang stores across Germany, Austria, Belgium, Switzerland, Czech Republic, France, Hungary, the Netherlands, and Poland.

More information:
Texaid Mustang circularity
Source:

TEXAID

(c) FROY
25.07.2022

FROY wins C.L.A.S.S. ICON 2022

C.L.A.S.S. Eco Hub has selected the winner of C.L.A.S.S. ICON Award 2022, the annual contest with the aim of sponsoring a visionary creative who is able to combine design, responsibility, innovation and communication. Receiving the third edition of the eye-turning award is FROY Club, an experimental and responsible fashion project born in 2018 by designer Arman Avetikyan.

Froy is rooted in Armenian culture and by mixes high quality materials and yarns. Working with a sustainable ethic, Froy reconciles traditional know how and innovative techniques to create hybrid, versatile and speaking surfaces. The brand uses Italian certified fabrics and yarns that meet European standards, selecting natural materials to create high-quality products with a circular life. Froy also chooses GOTS, FSC and OEKO-TEX certified fabrics and yarns in order to support a clear production chain.

C.L.A.S.S. Eco Hub has selected the winner of C.L.A.S.S. ICON Award 2022, the annual contest with the aim of sponsoring a visionary creative who is able to combine design, responsibility, innovation and communication. Receiving the third edition of the eye-turning award is FROY Club, an experimental and responsible fashion project born in 2018 by designer Arman Avetikyan.

Froy is rooted in Armenian culture and by mixes high quality materials and yarns. Working with a sustainable ethic, Froy reconciles traditional know how and innovative techniques to create hybrid, versatile and speaking surfaces. The brand uses Italian certified fabrics and yarns that meet European standards, selecting natural materials to create high-quality products with a circular life. Froy also chooses GOTS, FSC and OEKO-TEX certified fabrics and yarns in order to support a clear production chain.

By receiving two thousand euros for sourcing purposes, smart consultancy support and communication aid from the C.L.A.S.S. team, plus assistance to the brand in commercial activities, a physical stand in the WHITE Show and a dedicated brand page on Renoon powered by C.L.A.S.S. partners; Froy will have the opportunity to upgrade its efforts in terms of responsibility and innovation, while sharing its conscious vision and values with a wider audience. Moreover, the Italian brand with Armenian roots will become part of the C.L.A.S.S. ICON community, joining past winners such as the high fashion Italian designer Gilberto Calzolari and the Portuguese streetwear brand Duarte

Source:

C.L.A.S.S.

Texaid
15.06.2022

TEXAID supports the Swiss textile recycling ecosystem with professional collecting and sorting of textiles

TEXAID as a professional collector and sorter with roots in Switzerland contributes to this ecosystem to enable the textile-to-textile recycling.  The creation of Swiss Textile Recycling Ecosystem marks a key milestone in the upscaling of Worn Again Technologies’ recycling process technology with technology scale-up partner Sulzer Chemtech in Winterthur. It also supports its ambition to create a circular economy where non-reusable, hard-to-recycle textiles can be reintroduced into supply chains to become new fibers.

To cause a paradigm shift in the fashion industry and realize true circularity requires all members of the value chain to be on the same page and working towards the same goals. The Swiss Textile Recycling Ecosystem is a network comprising fabric and textile manufacturers, waste collectors and sorters, as well as retailers, brand owners and technology providers – all coordinated by Swiss Textiles. All these parties will cooperate to make their shared vision of a more sustainable fashion industry a reality, where used textiles can be recycled into new textiles.

TEXAID as a professional collector and sorter with roots in Switzerland contributes to this ecosystem to enable the textile-to-textile recycling.  The creation of Swiss Textile Recycling Ecosystem marks a key milestone in the upscaling of Worn Again Technologies’ recycling process technology with technology scale-up partner Sulzer Chemtech in Winterthur. It also supports its ambition to create a circular economy where non-reusable, hard-to-recycle textiles can be reintroduced into supply chains to become new fibers.

To cause a paradigm shift in the fashion industry and realize true circularity requires all members of the value chain to be on the same page and working towards the same goals. The Swiss Textile Recycling Ecosystem is a network comprising fabric and textile manufacturers, waste collectors and sorters, as well as retailers, brand owners and technology providers – all coordinated by Swiss Textiles. All these parties will cooperate to make their shared vision of a more sustainable fashion industry a reality, where used textiles can be recycled into new textiles.

TEXAID as a stakeholder in the Swiss Textile Recycling Ecosystem and as leading textile recycling company with over 40 years of experience will support the initiative through collecting, sorting, pre-processing and providing pre- and post-consumer feedstock to the Demonstration Plant. At its headquarters in Schattdorf (CH), TEXAID will investigate possibilities to automate the sorting and pre-processing of textile feedstock for recycling. Currently, TEXAID processes more than 80,000 tons of end-of-use textiles and footwear every year all over Europe and the US.

More information:
Texaid Sulzer textile recycling
Source:

Texaid

06.05.2022

adidas grows double-digit in Western markets in Q1 2022

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate.

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate. Backed by an exceptionally strong wholesale order book and relentless focus on driving growth in our own DTC channels, we expect this positive development to continue for the rest of the year,” said adidas CEO Kasper Rorsted. “In the East, we will return to growth in Asia-Pacific in the second quarter, while we expect the challenging market environment in Greater China to continue. With strong double-digit growth in the vast majority of our markets, representing more than 80% of our business, we are well positioned for success in 2022. “

For the full press release, see attached document.

Source:

adidas AG

(c) SANITIZED AG
03.05.2022

SANITIZED AG launches biocide-free product for odor-free textiles

SANITIZED AG, a specialist for hygiene function in textiles, is expanding its Sanitized® Odorex™ portfolio for odorneutralizing technologies. The new OX20 product is usable on cotton, viscose, or synthetic fibers. It does not contain any biocides, it is highly wash-resistant, and it can be combined well with other effects.

Sanitized® Odorex™ is the product of several years of experience with environmentally friendly textile treatments. SANITIZED focuses heavily on the causes of, the production of, and the fighting of unpleasant sweat odor in textiles. The basis for the newly introduced biocide-free OX20 product is a metal-free polymer that neutralizes odors. It meets market requirements regarding wash-resistance with excellent results after up to 50 household washes.

SANITIZED AG, a specialist for hygiene function in textiles, is expanding its Sanitized® Odorex™ portfolio for odorneutralizing technologies. The new OX20 product is usable on cotton, viscose, or synthetic fibers. It does not contain any biocides, it is highly wash-resistant, and it can be combined well with other effects.

Sanitized® Odorex™ is the product of several years of experience with environmentally friendly textile treatments. SANITIZED focuses heavily on the causes of, the production of, and the fighting of unpleasant sweat odor in textiles. The basis for the newly introduced biocide-free OX20 product is a metal-free polymer that neutralizes odors. It meets market requirements regarding wash-resistance with excellent results after up to 50 household washes.

Versatile and highly cost-efficient
The new product can be applied in extraction, pad, and spray. It can be used on all common substrates and is compatible with other textile effects. These properties increase the flexibility and efficiency during product design, and they reduce production costs. As one of the first technologies worldwide, OX20 can be applied to synthetics in the dye bath.

Feel and wearing comfort
Binders and particle systems negatively affect the textile’s feel and moisture management. OX20 is a particle-free product with a long-lasting effect that does not change how the textile feels, nor does it affect the textile’s moisture management.

Source:

SANITIZED AG

(c) Hologenix
22.04.2022

DFND introduces Sleepwear powered by CELLIANT®

DFND, a compression and apparel brand designed for the military, firefighters, first responders and pro athletes, now available to athletes everywhere, has partnered with Hologenix®, creators of CELLIANT® to introduce a line of unisex sleepwear: DFND REST. Designed for the “warrior athlete,” the sleepwear is powered by DFND X CELLIANT®, the trailblazer in bio-responsive infrared textiles.
 
Both DFND and Hologenix are focused on increasing recovery and enhancing performance for the human body, so the partnership couldn’t be more ideal. CELLIANT’s science-backed infrared (IR) technology is a natural blend of bioceramics that allows textiles to capture and convert body heat into infrared energy. DFND REST powered by CELLIANT notes that it is “clinically proven to enhance tissue oxygen levels to help your body be at its best.”

DFND REST powered by CELLIANT includes three unisex designs in two colors each, Tan and Heather Grey: IR Short Sleeve V-Neck Shirt; IR Long Sleeve V-Neck Shirt and IR Sleepwear Long John; and two designs in Black: IR Recover RX Hood; IR Recover RX Jogger.

DFND, a compression and apparel brand designed for the military, firefighters, first responders and pro athletes, now available to athletes everywhere, has partnered with Hologenix®, creators of CELLIANT® to introduce a line of unisex sleepwear: DFND REST. Designed for the “warrior athlete,” the sleepwear is powered by DFND X CELLIANT®, the trailblazer in bio-responsive infrared textiles.
 
Both DFND and Hologenix are focused on increasing recovery and enhancing performance for the human body, so the partnership couldn’t be more ideal. CELLIANT’s science-backed infrared (IR) technology is a natural blend of bioceramics that allows textiles to capture and convert body heat into infrared energy. DFND REST powered by CELLIANT notes that it is “clinically proven to enhance tissue oxygen levels to help your body be at its best.”

DFND REST powered by CELLIANT includes three unisex designs in two colors each, Tan and Heather Grey: IR Short Sleeve V-Neck Shirt; IR Long Sleeve V-Neck Shirt and IR Sleepwear Long John; and two designs in Black: IR Recover RX Hood; IR Recover RX Jogger.

DFND REST, like all DFND products, is designed, tested and made in the USA. CELLIANT’s proprietary mineral formula is processed and manufactured in the USA.

DFND REST will be featured at the following upcoming shows: the Holistic Health and Fitness (H2F) Exposition and Industry Day, April 26 to 27 at Fort Eustis; Warrior West, April 27 to 28 at the San Diego Convention Center; Modern Day Marine, May 10 to 12, Washington, D.C.; The Human Performance & Biosystems Summit, June 29 to 30 at National Harbor, Maryland; National Guard Conference & Exhibition, August 26 to 29, Columbus, Ohio; and AUSA, October 10 to 12, Washington, D.C.

More information:
Celliant DFND sleepwear
Source:

Hologenix / Sarah P. Fletcher Communications 

STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection © KARL MAYER STOLL Textilmaschinenfabrik GmbH, photographer Rafael Krötz for ssawstudio.com
STOLL trend collection "WONDERFUL“
06.04.2022

"WONDERFUL" by STOLL

  • Flat knitting is one of the most versatile textile forming technologies. What is possible here is shown by STOLL's regular trend collections.
  • STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection

The latest compilation of inspiring designer pieces is entitled "WONDERFUL". On display are wonderful products designed to make the viewer pause and marvel. "WONDERFUL" shows what it means to create wonderful knitted articles. In today's world, moments of true wonder seem rare, but with the right technology, creative visions become products that inspire and amaze. With STOLL's technological solutions, wonderful product ideas can be realized for everything that is important to us: our children, our home, our appearance and our well-being.

  • Flat knitting is one of the most versatile textile forming technologies. What is possible here is shown by STOLL's regular trend collections.
  • STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection

The latest compilation of inspiring designer pieces is entitled "WONDERFUL". On display are wonderful products designed to make the viewer pause and marvel. "WONDERFUL" shows what it means to create wonderful knitted articles. In today's world, moments of true wonder seem rare, but with the right technology, creative visions become products that inspire and amaze. With STOLL's technological solutions, wonderful product ideas can be realized for everything that is important to us: our children, our home, our appearance and our well-being.

Accordingly, the new trend collection serves different areas of application: Extraordinary STOLL-knit and wear® products in the new gauge of E 10.2 and in established gauges, such as E 7.2, inspire the market for seamless articles. Extravagant combinations of intarsia, STOLL-weave-in® and STOLL-ikat plating® techniques create novel pattern possibilities, material usages and color impressions. The possibility of individualization is supported by selected products via STOLL-autocreate®.

The trend collection causes amazement, but also stands for responsibility and environmental awareness. One chapter presents a sustainable footwear fabric solution that was created in collaboration with renowned players in textile value creation.

"WONDERFUL" was launched in March 2022. The first presentations took place in front of customers in Italy and were a great success. "Our "WONDERFUL" designs were very well received. Some customers have adopted the new pattern options contained there directly into their current collection, and ordered the necessary technical kids to convert their machines," explains Jörg Hartmann, Head of Fashion & Technology at STOLL with satisfaction.

RADICIGROUP
05.04.2022

RadiciGroup: A spacesuit for analogue Mars missions

  • RadiciGroup establishes a network of Italian textile excellence to create a spacesuit for analogue Mars missions
  • The Space Economy is launched in Bergamo. Mars Planet analogue astronauts to take part in the SMOPS Mars mission simulation wearing suits made of RadiciGroup yarn.

A group of companies in the Italian textile industry, headed by RadiciGroup, has created the first spacesuit for analogue simulation fully designed and engineered in Italy for the Space Medicine Operations (SMOPS) Mars mission. This endeavour was promoted and organized by Mars Planet – the Italian chapter of the Mars Society headquartered in the province of Bergamo – under the patronage of the Italian Space Agency.

The SMOPS analogue mission is mainly focused on space medicine: health monitoring of future astronauts and development of support technologies for the simulation of life in space and planet environments.

Source:

RADICIGROUP

(c) Manufy
25.02.2022

Sustainable fashion platform Manufy reaches first 1000 production requests

Manufy, a marketplace for sustainable fashion production has reached its thousandth production request. The platform connects conscious brands with sustainable manufacturers in hopes to create a cleaner future for the clothing industry.

The right conditions
The start-up, which launched in december of 2020, has seen a sharp increase in production requests the last couple of months. With trade shows being cancelled due to covid, lots of manufacturers and brands are looking for new ways to do business. Going digital was one of the logical steps. “We’ve seen many users that were used to more traditional ways of working join Manufy,” says co-founder Michiel Dicker. “Some of them didn’t have a website, so our platform helps them become visible online.”

An increase was also noticed on the brand side of Manufy. With most new brands being digital natives that have a strong focus on sustainability, the platform helps them to get started.

Manufy, a marketplace for sustainable fashion production has reached its thousandth production request. The platform connects conscious brands with sustainable manufacturers in hopes to create a cleaner future for the clothing industry.

The right conditions
The start-up, which launched in december of 2020, has seen a sharp increase in production requests the last couple of months. With trade shows being cancelled due to covid, lots of manufacturers and brands are looking for new ways to do business. Going digital was one of the logical steps. “We’ve seen many users that were used to more traditional ways of working join Manufy,” says co-founder Michiel Dicker. “Some of them didn’t have a website, so our platform helps them become visible online.”

An increase was also noticed on the brand side of Manufy. With most new brands being digital natives that have a strong focus on sustainability, the platform helps them to get started.

One-stop-shop
The production requests being placed on the platform cover a wide range of garments. Hoodies and t-shirts are popular, but the Manufy team also sees lots of shoes, caps, bags, dresses, swimwear and lingerie requests coming in. “This sometimes leads us to having to find manufacturers specifically for the job, but it helps us to create a better user experience!” explains Dicker.

Manufy uses feedback from its users to keep improving the platform. Aside from finding new manufacturers to fill production requests the team has been working on a lot of new functionalities based on input from users. A new version of the platform will be released very soon. “With Manufy 2.0 it will become easier to organise your projects, place re-orders and have all your production details in one place. Manufy will be your one-stop-shop for all your sourcing needs!” says Dicker.

More information:
Manufy Sustainability digital
Source:

Manufy

Nikolaus Bader, Pixabay
31.01.2022

Premium Group returns to Berlin: New Concept premiers in July

Premium Group, important trade fair organiser in the German fashion industry and biggest player for advanced contemporary fashion in Europe, is returning to the capital and, in July 2022, is set to present a completely new live event concept around the Berlin Radio Tower and summer garden.
 
Interactive live event concept for B2B and D2C and redefines the future of fashion fairs
After decades of everything being the same, the constantly changing market environment forces brands, retailers, consumers and trade fair organisers alike to continuously develop and reposition themselves. Two years after the start of the pandemic, the Berlin-based company is now reacting with a surprising step: Anita Tillmann, Jörg Arntz and the team are bringing their passion for people, fashion, innovation and entertainment back home and setting new standards for live fashion events.
 

Premium Group, important trade fair organiser in the German fashion industry and biggest player for advanced contemporary fashion in Europe, is returning to the capital and, in July 2022, is set to present a completely new live event concept around the Berlin Radio Tower and summer garden.
 
Interactive live event concept for B2B and D2C and redefines the future of fashion fairs
After decades of everything being the same, the constantly changing market environment forces brands, retailers, consumers and trade fair organisers alike to continuously develop and reposition themselves. Two years after the start of the pandemic, the Berlin-based company is now reacting with a surprising step: Anita Tillmann, Jörg Arntz and the team are bringing their passion for people, fashion, innovation and entertainment back home and setting new standards for live fashion events.
 
The creators of PREMIUM, SEEK, FASHIONTECH and THE GROUND are redesigning the sustainability of future-proof fashion fairs with the commitment of the Berlin government, and launching a completely new event concept in which the B2B and D2C sectors merge. In the new Premium Group cosmos, brands can present themselves emotionally and interactively to retailers and consumers. All realities are represented: the new kids in the industry, such as D2C brands, e-com and influencers, are given their place in the Premium Group cosmos in the form of the new fashion festival THE GROUND. But also long-standing partners of established brands and representatives from traditional stationary retail will profit from further developed B2B spaces.

Taking into account the different needs of all visitors, the events will take place from Thursday to Saturday for the first time: from 7 to 9 July 2022.
 
Classic trade fair formats are no longer up to date
'Classic trade fair formats are no longer up to date', sums up Anita Tillmann, Managing Partner of the Premium Group. 'We have to reinvent ourselves and look to the future – to a new stage in the life of the fashion industry post pandemic, which has changed everything. Digitisation, climate change, pandemic, changing values, new industry cycles and new players, as well as topics around gender equality, diversity, metaverse, gaming and NFTs, are just a few areas we are dealing with. We aim to set new standards for the future of trade events and merge B2B and D2C with our new event concept.'
 
Move to Frankfurt am Main fell victim to the coronavirus
The planned kick-off of the Premium Group Events in Frankfurt am Main could not take place because of the coronavirus, and the plan to establish the events at the new location has fallen victim to the pandemic.
 
'It's a shame that the move to Frankfurt didn't work out', says Jörg Arntz, Managing Director of the Premium Group. 'We all tried very hard and did our best. As an entrepreneur, you always have to remain capable of acting and questioning decisions that have been made. In order to do justice to our customers and the market environment, we have decided – after intensive discussions with the city of Berlin – to hold our events in our home city again. We are Berliners at heart and are confident that the new government will anchor Berlin as Europe's creative metropolis in a sustainable and economic way.'

New government brings Premium Group power back to Berlin
“Berlin is THE metropolis for the cultural and creative industries and Europe's largest start-up scene. As the new state government, we are committed to an economically strong Berlin. Trade fairs and events are an important economic factor and a centre of attraction for Berliners and guests from all over the world. We are therefore delighted that we have succeeded in bringing the events of the Premium Group back home”, says Franziska Giffey, Mayor of Berlin.
 
“The Premium Group events strengthen Berlin as a fashion and trade fair location, attract tens of thousands of trade visitors and fashion enthusiasts, create additional economic effects in hotels, gastronomy, retail and the service industry, multiply the global appeal of the city as a location and will open the summer of creativity brilliantly in July. The fact that the fair organiser is returning to its home venue with a new concept is a special opportunity for Berlin and will give the city an additional boost. Opening up the events to end consumers ideally rounds off the trade fair concept. With the Premium Group, Berlin will sustainably strengthen the core themes of fashion and digital transformation”, says Stephan Schwarz, Senator for Economics, Energy and Operations.

Source:

PREMIUM Exhibitions GmbH

(c) ARMALITH®
13.01.2022

Armalith presents Armalith 2.0® and its portfolio

«Armalith® is the story of my passions. Firstly textiles, which opened the doors to the great ready-to-wear and haute couture houses. Then motorcycling, an incredible vehicle for finding freedom and meeting people. In 2003, I combined these two passions by creating Armalith® with one idea in mind: to offer the best possible protection to bikers without compromising on the comfort and authenticity of a real pair of jeans. Today, Armalith 2.0® is the denim of choice for the most prestigious brands for their abrasion protection equipment.» Pierre-Henry Servajean, Armalith® MK Support manager.

Armalith 2.0 in facts:

«Armalith® is the story of my passions. Firstly textiles, which opened the doors to the great ready-to-wear and haute couture houses. Then motorcycling, an incredible vehicle for finding freedom and meeting people. In 2003, I combined these two passions by creating Armalith® with one idea in mind: to offer the best possible protection to bikers without compromising on the comfort and authenticity of a real pair of jeans. Today, Armalith 2.0® is the denim of choice for the most prestigious brands for their abrasion protection equipment.» Pierre-Henry Servajean, Armalith® MK Support manager.

Armalith 2.0 in facts:

  • The mechanical qualities of leather with the comfort of denim
  • Extreme resistance to cuts, traction, tears and abrasion
  • High UV resistance that preserves its mechanical properties
  • One layer for resistance that is superior to any lined products

High technology for high security
The heart of the armour is made of UHMWPE (high molecular weight polyethylene). This high resistance fiber comes from aerospace research; it is used for space module re-entry ropes, military armour, mooring cables for offshore platforms and more. This core is then covered with a cotton fiber using an exclusive and patented process, and combined with LYCRA® dualFX® technology for a powerful and durable stretch.

High resistance for high protection
High-tech integrated into authentic denim for unique comfort and protection, Armalith 2.0® meets the most demanding standards such as Darmstadt and Cambridge, which are more scientific than the CE certification.
Armalith 2.0® is available in 3 grades - A, AA and AAA - to cover all needs from urban use to maximum protection against abrasion. In its EXO (KNIT) form, Armalith 2.0® can be used as a lining to increase resistance in specific areas without using other uncomfortable solutions.

High comfort for high style
Safety in a single layer of fabric, comfort, softness, stretchability, and style! Armalith 2.0® is a real denim. Soft, supple, comfortable, breathable and hydrophilic, it allows all the usual textures, dyes, prints and finishing in low temperatures.

Armalith 2.0® is an ethical and responsible denim

  • GRS cotton sourced from Greece.
  • Designed in France, manufactured and produced on a single site - spinning, dyeing, indigo, weaving, finishing - at Tejidos Royo in Spain.
  • UHMWPE fibre requires half the energy to produce than aramids.
  • The UHMWPE fibre used under the ARMALITH 2.0® patent is continuous (no energy-intensive cracking) and untextured (no energy-intensive texturing).
  • All Armalith 2.0® denim manufacturing processes are carried out at low temperatures: a world first for stretch fabrics.
  • No heavy metals used in the pigments, the indigo is made using a slow, cold, waterless process
  • Resistant to more than a thousand washes for greater longevity and without loss of elasticity.
More information:
Armalith Denim Leather stretch fabric
Source:

ARMALITH® / VIA VENETO

ISKO™ creates a fully sustainable Fabric Collection (c) ISKO
13.12.2021

ISKO™ creates a fully sustainable Fabric Collection

ISKO’s 2023 Collection Vol. 1 is designed to meet the varied needs of today’s consumer by providing fashion, comfort, versatility and responsibility in each of its innovative fabrics. The entire collection is “engineered for nature” using ISKO’s recently launched R-TWO™50+ technology – a process which creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ is the driving force behind ISKO’s efforts to reduce the industry’s impact on the planet. The fabrics are made with a minimum of 50% pre- and post-consumer recycled blend that is entirely Global Recycled Standard (GRS) certified. This results in less use of natural resources and a reduced carbon and water footprint of up to 45% and 65% respectively.

ISKO has also incorporated hemp into the collection as a sustainably viable alternative to cotton. Hemp requires much less water, no pesticides and grows quickly in almost any type of soil. New spinning techniques give the fiber a softer hand feel and make hemp a genuinely enticing option to cotton.

ISKO’s 2023 Collection Vol. 1 is designed to meet the varied needs of today’s consumer by providing fashion, comfort, versatility and responsibility in each of its innovative fabrics. The entire collection is “engineered for nature” using ISKO’s recently launched R-TWO™50+ technology – a process which creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ is the driving force behind ISKO’s efforts to reduce the industry’s impact on the planet. The fabrics are made with a minimum of 50% pre- and post-consumer recycled blend that is entirely Global Recycled Standard (GRS) certified. This results in less use of natural resources and a reduced carbon and water footprint of up to 45% and 65% respectively.

ISKO has also incorporated hemp into the collection as a sustainably viable alternative to cotton. Hemp requires much less water, no pesticides and grows quickly in almost any type of soil. New spinning techniques give the fiber a softer hand feel and make hemp a genuinely enticing option to cotton.

2023 Collection Vol. 1 includes ISKO Blue Skin™, Jeggings™, ISKO™ Rigid, ISKO Rigidflex™, ISKO EFD™, Summer Colors, Catwalk, ISKO Reform™, ISKO™ Black, ISKO™ Comfort, ISKO Pop™ – and five macro trends (Denim Nation, New Origin, Isko Reborn, Isko Motion, Chill Zone). These trends incorporate some of ISKO’s key denim technologies to create a versatile collection that complements any style, vibe and mood.

ISKO Reform™, ISKO Blue Skin™ and Jeggings™ are the groups used to create fabrics that are trans-seasonal and one-size-fits-all – subscribing to a philosophy of inclusivity that is valued by Gen Z.

The collection also gives prominence to color groups. ISKO™ Black delivers various shades of black with different elasticity and aspect options. This part of the collection fulfils the perennial need for this timeless color. ISKO EFD™, or ‘Eco For Dye’, is a sustainable approach to producing ecru fabric. This technology shortens the production process and saves on water usage. The result is an ecru-colored base that can be used as is for a natural look or can also be dyed to any color.

New this season are the Summer Colors and Catwalk groups. Summer Colors is inspired by an eclectic mix of influences including natural earth tones, workwear looks or bright colors with authentic, open-end denim constructions. Catwalk is a bold and bright addition to the collection that offers on-trend styles in ISKO finishes including ISKO Urban Jeather™, Pearl Coat and Flashy Finish.

Source:

ISKO / Menabò Group

17.11.2021

C.L.A.S.S. welcomes Sensil® BioCare by NILIT into its material hub

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.

NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.

NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in  the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.

Source:

C.L.A.S.S.

13.10.2021

Ralph Lauren and Dow release manual for dyeing processes

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Conventional fabric dyeing processes require trillions of liters of water each year, generating roughly 20% of the world’s wastewater.1, 2 Pretreating fabric with ECOFAST™ Pure helps significantly reduce the amount of water, chemicals and energy needed to color cotton, by enabling up to 90% less process chemicals, 50% less water, 50% less dyes and 40% less energy without sacrificing color or quality.3

Ralph Lauren began integrating Color on Demand into its supply chain earlier this year and first launched product utilizing ECOFAST™ Pure as part of the Company’s Team USA collection for the Olympic & Paralympic Games Tokyo 2020. Designed to help address water scarcity and pollution caused by cotton dyeing, Color on Demand is a multi-phased system with a clear ambition to deliver over time the world’s first scalable zero wastewater cotton dyeing system. By 2025, the brand aims to use the Color on Demand platform to dye more than 80% of its solid cotton products.

 

1 Drew, Deborah and Genevieve Yehounme. “The Apparel Industry’s Environmental Impact in 6 Graphics.” World Resources Institute, July 5, 2017. https://www.wri.org/blog/2017/07/apparel-industrys-environmental-impact-6-graphics
2 Rep. A New Textiles Economy: Redesigning Fashion’s Future. Ellen MacArthur Foundation, Circular Fibres Initiative, 2017. https://ellenmacarthurfoundation.org/a-new-textiles-economy
3 A full third-party reviewed and validated life cycle assessment is available by request at www.dow.com/ecofast.

 

Source:

Dow / G&S Business Communications

11.10.2021

ISKO™ introduces R-TWO™50+

Denim ingredient brand ISKO™ announces R-TWO™50+. Part of Responsible Innovation™, R-TWO™50+ creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ reduces carbon emissions by as much as 45% and water usage by as much as 65%. An exclusive yarn spinning technology, patented by ISKO, uses a minimum of 50% recycled materials to reduce reliance on natural resources.

The fabrics are stronger and more durable, and have a good shape recovery, a soft cotton hand feel and dry up to 20% more quickly.
R-TWO50+ fabrics also have the Global Recycled Standard (GRS) certification, which provides standardised verification for recycled materials.

ISKO is also one of the first in the fashion market to achieve an ESG (Environmental, Social, and Governance) scoring, which measures companies’ sustainability and societal impact.

Denim ingredient brand ISKO™ announces R-TWO™50+. Part of Responsible Innovation™, R-TWO™50+ creates high-quality denim that is less harmful to the natural world.

R-TWO™50+ reduces carbon emissions by as much as 45% and water usage by as much as 65%. An exclusive yarn spinning technology, patented by ISKO, uses a minimum of 50% recycled materials to reduce reliance on natural resources.

The fabrics are stronger and more durable, and have a good shape recovery, a soft cotton hand feel and dry up to 20% more quickly.
R-TWO50+ fabrics also have the Global Recycled Standard (GRS) certification, which provides standardised verification for recycled materials.

ISKO is also one of the first in the fashion market to achieve an ESG (Environmental, Social, and Governance) scoring, which measures companies’ sustainability and societal impact.

More information:
Isko Denim Recycling Sustainability
Source:

ISKO / Menabò Group srl

Ascend Performance Materials, APMPR063 ©Ascend Performance Materials
SARS-CoV-2, Influenza A inactivated by zinc-embedded nylon fabric.
22.09.2021

SARS-CoV-2, Influenza A inactivated by zinc-embedded nylon fabric

  • A paper published in ACS Applied Materials Interfaces details effectiveness, describes protocol for future testing

An international team of scientists and engineers from the University of Cambridge, the Icahn School of Medicine at Mount Sinai, ResInnova Labs and Ascend Performance Materials has found that a nylon fabric embedded with zinc ions successfully inactivated 99% of the viruses that cause COVID-19 and the common flu.

Face masks, protective clothing and filters are used to slow the spread of viruses. But poor-quality masks can harbor active viruses from infected wearers, posing a transmission risk.

“A major challenge is absorption and inactivation,” said Vikram Gopal, Ph.D., co-senior author and chief technology officer at Ascend Performance Materials. “Respiratory viral illnesses, such as COVID-19, and the flu, are transmitted through droplets and aerosols. Polypropylene, the material in commonly used disposable masks, is a hydrophobic plastic and does not absorb moisture. Instead, the viruses can sit on the surface of the mask, posing a transmission risk when the mask is handled.”

  • A paper published in ACS Applied Materials Interfaces details effectiveness, describes protocol for future testing

An international team of scientists and engineers from the University of Cambridge, the Icahn School of Medicine at Mount Sinai, ResInnova Labs and Ascend Performance Materials has found that a nylon fabric embedded with zinc ions successfully inactivated 99% of the viruses that cause COVID-19 and the common flu.

Face masks, protective clothing and filters are used to slow the spread of viruses. But poor-quality masks can harbor active viruses from infected wearers, posing a transmission risk.

“A major challenge is absorption and inactivation,” said Vikram Gopal, Ph.D., co-senior author and chief technology officer at Ascend Performance Materials. “Respiratory viral illnesses, such as COVID-19, and the flu, are transmitted through droplets and aerosols. Polypropylene, the material in commonly used disposable masks, is a hydrophobic plastic and does not absorb moisture. Instead, the viruses can sit on the surface of the mask, posing a transmission risk when the mask is handled.”

Cotton also has problems, Dr. Gopal said. “Cotton effectively absorbs moisture, but it doesn’t inactivate the virus – again, posing a transmission risk,” he said. In the paper published in ACS Applied Materials Interfaces, the researchers described how a fabric made of nylon 6,6 embedded with active zinc ions absorbed virus-containing moisture droplets and effectively inactivated the particles. The fabric produced a 2-log, or 99%, reduction of virus particles in one hour.

The research team also was able to demonstrate that nylon with active zinc ions remains stable over time, keeping its virus-inactivating properties after 50 washes. “The study shows how nylon textile fabric with zinc outperforms the widely used cotton and polypropylene materials at virus absorption and inactivation,” Dr. Gopal said. The findings have significant implications for future development of PPE, Dr. Gopal said. “Pathogen-free PPE does more than just cut down the risk of transmitting the virus,” Gopal said. “By making PPE washable and reusable, you reduce the need for single-use products, keeping hundreds of millions of masks out of landfills.”