From the Sector

Up to the age of three, a baby uses around 5,000 diapers. Despite the convenient handling of common disposable diapers, parents are increasingly looking for a healthy and sustainable alternative to these products to avoid waste. In Germany alone, 10 million diapers are disposed of every day.

Ways to solve this dilemma, would be disposable products that are made from bio-based or biodegradable materials, or reusable products with a longer life span replace disposable products.

Founding team Luisa Kahlfeldt and Caspar Böhme combine both with their "Sumo Diapers." These cloth diapers are made entirely of sustainable materials while offering high performance and innovative design.

The Sumo Diaper is a fitted cloth diaper that consists of a waterproof cover and absorbent inserts. The cover is sewn in such a way that a pocket is formed: this is where the absorbent pad is inserted to prevent slipping.

To further enhance the performance of this absorbent pad, the Sumo team partners with the viscose special fibre manufacturer Kelheim Fibres, who brings decades of experience from the hygiene sector, especially for sensitive applications where high absorbency is required (such as tampons). Together, Sumo and Kelheim Fibres have developed a high-performance absorbent pad that uses no fossil materials.

The basis are functionalised specialty viscose fibres with adapted cross-sections. Needle-punched / thermobonded nonwovens with a blend of specialty viscose and PLA bicomponent fibres were chosen to ensure the product's washability. PLA stands for polylactic acid made from natural and renewable raw materials. By combining nonwovens, usually found mainly in the single-use sector, with reusable products, Sumo and Kelheim Fibres have chosen a completely new approach.

Inside the pad, the speciality fibres from Kelheim score with their special properties: In the distribution layer (ADL), the trilobal cross-section of the Galaxy® fibre forms capillary channels that enable efficient and optimized liquid distribution and thus optimum use of the capacity of the absorbent core, offering the lowest rewet values.

In the absorbent core, the segmented hollow fibre Bramante stores liquid not only between but also inside the fibre. The liquid remains there even when pressure is applied to the construction, providing excellent rewet values. Bramante can absorb up to 260% of its own weight in liquid. Cotton only achieves values of around 50% here.

The innovative nonwoven construction with the speciality fibres from Kelheim performs significantly better in tests in terms of air permeability, liquid absorption and rewetting than commercially available solutions made of synthetic fibres or cotton in knitted structures, and has earned Sumo diapers a place among the finalists for the IDEA® Long-Life Product Achievement Award.

The launch is scheduled for the first of May.

To ensure that pets are also well equipped in terms of product safety, quality and durability of their cuddly blankets, cushions or favorite toys, the textile testing service provider Hohenstein has established its quality label for tested pet supplies. After all, the number of pets in private households is growing every year, and for many of us, our animal roommates count as full members of the family and are cared for accordingly.

The label is explicitly designed for textile products such as blankets or pillows for sleeping areas, dog clothing, mats or even horse blankets. It provides consumers with clear product information on product safety, quality and durability, and also offers home/pets and their owners security against unwanted residues of chemical substances. Beyond its standard physical tests, the quality label can be flexibly extended: depending on the intended use, product properties such as chew resistance, scratch resistance, outdoor suitability, water repellence, waterproofness or air permeability play a major role in ensuring that pets feel completely comfortable.

The Hohenstein quality label Tested Pet Supply is an independent proof of quality and joins the ranks of the existing Hohenstein quality labels.

• Expanding additive manufacturing technology portfolio for next generation of sustainable on-demand textile production

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in digital textile production technologies, announced the acquisition of all associated assets of Somerville, Massachusetts-based Voxel8.  

Voxel8’s advanced additive manufacturing technology for textiles allows for digital fabrication of functional features with zonal control of material properties, in addition to utilizing high-performance elastomers adhering to inkjet technology.

"By integrating Voxel8’s technology into Kornit’s product roadmap, we will be able to transform numerous market segments and verticals, accelerating our collective visions and technology advancements," . “Voxel8 offers direct 3D print-on-part capabilities, advanced design software that can be easily integrated with any production floor software workflow, and versatile chemistry enabling on-the-fly formulation of high-performance elastomers to change the material properties of the resulting printed structures by multiple orders of magnitude. This means reflective, high-density, silicone and metallics, as well as compression elements for sports and therapeutics, protection elements like cushioning and impact resistance, and functionality applications like anti-slip, waterproofing, and other qualities combining form and function that are key to Kornit’s vision of digitizing production in every conceivable manner,” explained Kobi Mann, Kornit Digital Chief Technology Officer

To ensure that outdoor clothing and equipment can remain in use for a long time, the right care is crucial. The cleaning and impregnation products from ATSKO preserve and protect the fabric - and nature, too.

The outdoor season has begun - hikers, trail runners, bikers, campers and many others are now drawn back out into nature. To make sure that functional clothing and gear are optimally prepared for every situation, they should be regularly cleaned, cared for and impregnated, especially when the waterproofing starts to wear off or dirt stains affect the fabric. Thorough cleaning and care at the end of the season also ensure that the outdoor equipment survives storage in the basement or attic undamaged and can develop its full performance again next year. For almost 90 years, the US manufacturer ATSKO has been developing sustainable products for the most extreme outdoor challenges. ATSKO stands for moisture protection as well as waterproofing and conditioning agents for shoes, clothing and outdoor accessories that maintain functionality and extend service life. Thanks to their natural ingredients, ATSKO products are sustainable and protect nature.

ATSKO is best known for three brands in particular: SNO-SEAL® Bees Wax is used to care for and protect leather shoes and leather products and is based on natural beeswax. SILICONE WATER-GUARD® spray protects functional textiles and equipment from moisture and wear and is breathable. Since 1982, SPORT-WASH© has become the leading detergent for high-performance sportswear and functional clothing. All products are also available in practical travel sizes that can be easily taken on tour or on vacation.

• Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

Sandro Mandrino, the Head of Design for Moncler Grenoble, was the first designer of the luxury fashion brand to incorporate Dyneema® into one of his creations through the Moncler Genius project. The Moncler Genius project advocates radical co-creation where multiple designers create their own signature collections in collaboration with the house. Together, these collections translate into one vision of the future and, as one of the nine designers, Mandrino’s interpretation of the future of fashion features Dyneema® Composite Fabric.

Using variations of the fabric in both white and black allowed Mandrino to bring his vision to life by merging skiwear, space suits and technology all in one. “ 3 Moncler Grenoble is first and foremost about performance,” states Mandrino, who integrated constructive solutions with fabric technology to develop a line that was meant to perform both on and off the ski slopes.

Dyneema®, the world’s strongest and lightest fiber, is 15 times stronger than steel yet light enough to float on water. The unmatched performance and protection of products made with Dyneema® have made it the material of choice in critical applications where failure is not an option for more than 30 years. In fabric form, Dyneema® is available in composites, denim, knits, wovens and hybrids for composite reinforcements. And because Dyneema® fabrics are made using Dyneema® fiber, they intrinsically provide high strength, low weight, waterproof and breathable properties – allowing designers to fuse the technical performance of ultra-light products with aesthetic design that doesn’t sacrifice strength or durability.

The Moncler team used the Grenoble collection as an opportunity to experiment and further understand the nature and behavior of Dyneema® fabrics, while simultaneously incorporating material performance with practical design. “Future collections will focus on expanding to new designs and fabric options in collaboration with DSM,” adds Mandrino.

“We are very excited to be working with the Moncler team to launch a collection of wonderful garments that allow people to explore the outdoors more safely and for longer periods of time,” states Marcio Manique, Global Business Director, Consumer & Professional Protection, DSM Protective Materials. “We look forward to further supporting Moncler as they develop innovative, high-tech garments that are also sustainably sourced through the introduction of bio-based Dyneema® fabrics.”

In line with DSM’s commitment to protect people and the environment they live in, the world’s first-ever bio-based ultra-high molecular weight polyethylene fiber was introduced in May 2020. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. DSM and Moncler’s continued partnership will not only provide high performance, light weight garments for outdoor enthusiasts but also environmentally sustainable alternatives that contribute to a more circular economy.

At this year’s trade fair „SIMAC Tanning Tech“, PFAFF Industrial, together with DÜRKOPP ADLER and the regional agency DAP ITALIA, will present the latest solutions for shoe and leather processing. The fair will take place in Milan from 19th to 21st of February 2020. The joint booth is located in Hall 14, No. C09.

PFAFF News and Highlights:

PFAFF 3806
New integrated workplace for closing rub-down seams, such as heel-, front- and side seams on street shoes, slippers and leg boots. The PFAFF 3806 is equipped with two-thread chainstitch high-speed seamer head PFAFF 5487 with drop feed and variable top feed, high lift and adjustable top feed pressure, which ensures consistently high quality. Reinforcing tapes, which may be applied from top impart greater durability to the seams and prevent fine leathers from being pulled out of shape. Automatic control sequences (via parameter or photocell) reduce the manual handling and increase the process reliability and output.

PFAFF 1591
On the fair PFAFF INDUSTRIAL will show its electronic single-needle shoe post-bed machine with touch-control panel, new thread trimmer for short thread ends (< 5 mm) and new programmable thread tension. The key benefit of “programmable thread tension” is that suitable thread tensions can be applied for different material thicknesses and/or for different seam sequences (as these can be programmed on electronic machines). The tensions can be accessed and/or set via a knee switch or stitch counting. Manual setting of the thread tension, as is common with current shoe machines, is no longer necessary with the programmed thread tension.

PFAFF 8303i
The ot-air taping machine for welding continuous seams on water-resistant, waterproof and breathable materials will be exhibited as “shoe version” with very small/slim post from back. Effortlessly shoe uppers with small radii can be taped. The slim post and the differential feed (via two separate drive motors for the top and bottom feed roller) ensures absolute neat seams and a requested fullness und shaped parts.
 

Archroma has launched at the recent ITMA exhibition its new Lurapret® N5396 & N5392 liq, a water-based ultra-low VOC polyurethane (PU) polymer coating technology.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Coatings are used in the textile industry to achieve features such as waterproofness, flexibility, durability and UV resistance. With the growing demand for safer and more ecological products, water-based PU coatings are progressively prevailing as the preferred coating technology.

The 2021 Schoeller Summer line makes a light-hearted impression that is inspired by PLAY. PLAY represents dynamic enjoyment and being part of a whole. Schoeller experiments with new innovative ideas and sustainable technologies, bringing lightness to the fabric and displaying huge respect for Mother Nature. The long-lasting, super-comfortable high-tech fabrics play around with the natural look but offer the functionality of synthetic materials, delight with fresh colouring and always stand for responsibly-produced textiles from Switzerland.

NATURAL TRAIL
Natural looks, warm sand, cactus or denim shades and bio-based technologies whet the appetite for an active summer. Totally uncomplicated, versatile and functional all describe the elastic, matt, light schoeller®-dynamic polyester quality in a linen look in shades of gold, green or blue. The comfortable, somewhat more compact schoeller®-dryskin double fabric in iceberg blue or sandy beige is reminiscent of linen but, thanks to its functional fibres on the inner side, surprises with outstanding moisture transport. Both are finished with the sustainable ecorepel® Bio technology, making them waterproof and feel equally comfortable worn during outdoor activities or in the city.

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

The sustainable wear2wear concept is synonymous with high-quality, responsible clothing. In European operations, textile fibres from used garments are used to produce new functional fabrics. Depending upon the area of intended use, they also meet strict waterproofing, breathability, protection and comfort requirements. To ensure that the raw material cycle comes full circle, these textiles can be recycled again when they reach the end of their service life. As a result, there is no waste, and they go on to produce new garments. As the wear-2-wear partner companies guarantee that – from the quality of the raw materials to the guaranteed recycling end process – these are 100 percent recyclable, functional fabrics made of recycled textile fibres. Water- and dirt-repelling technologies based on renewable raw materials, along with the most advanced membrane technology, will ensure that the textiles are manufactured and impregnated entirely without the use of PFC in the future too.

Five partner companies  
The five European partner companies in the wear2wear cooperation cover the entire recycling loop. Heinrich Glaeser Nachfolger GmbH is a German fibre and yarn producer and the “recycler” in the loop. Märkischen Faser GmbH (D) is the “upcycler” and fibre manufacturer. Carl Weiske GmbH & Co. KG (D) develops the polymers, fibres, yarns, chemical additives and textile systems, and TWD Fibres GmbH (D), a fully-integrated filament yarn producer, covers the entire range of polyester and polyamide 6.6 continuous filament yarns. Schoeller Textil AG, the innovative Swiss company, is responsible for textile production and manufactures sustainable high-tech fabrics with maximum clothing comfort. The matching climate-neutral and similarly 100 percent recyclable PTFE and PFC-free membrane, as well as recycled outer materials and linings, are supplied by Sympatex Technologies (D), the ecological alternative among the textile function specialists. DutchSpirit is a Dutch company which has been dedicated to environment-friendly clothing since 2010. Its mission is to significantly increase the awareness for sustainable clothing and offer recyclable clothing in the workwear segment. DutchSpirit is the initiator for the development of the Inspire products from Schoeller Textil and provided the inspiration for the wear2wear concept. Further garment-making partners who now also belong to the cooperative group include: Anchor Workwear BV (NL), Hüsler Berufskleider AG (CH), Groenendijk Bedrijfskleding BV (NL), Bedrijfskledingdiscounter BV (NL) and Rifka'S (NL).

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

Fresh innovation from the Taiwan Pavilion
The Taiwan Pavilion lives up to its reputation as one of the leading sources of industry innovation. Ten exhibitors in the Taiwan Pavilion will showcase a variety of innovations ideal for a number of industries. With advances in medical and hygiene product technologies, exhibitors Web-Pro Corporation will offer protective cover-all materials that resist pathogens and micro-organisms and multi-layered PE films for hygiene products, while Kae Hwa Industrial will introduce their developments in materials that protect against viruses. Four Elements Energy Biotechnology will showcase their multi-functional Masterbatch product, a unique FDA-qualified, anti-mildew and transparent plastic additive that repels bacteria.

Other exhibitors to watch out for in the Taiwan Pavilion include Ritex Machinery, who will display their Air Through machinery which can be applied to nonwoven fabrics for hygienic, medical and filtration uses. Everlight Chemical Industrial’s Evereco® adhesives introduce an eco-friendly solution with heat-resistance and other resilient properties. Also offering eco-friendly alternatives is TomLong Techstile and their TPU coated fabrics, ideal for waterproof and inflatable products.

Productivity and efficiency at the German Pavilion
Following high demand in the Chinese market, the German Pavilion returns with around 30 exhibitors, showcasing their expertise in efficiency in textile production. Highlights include Baumüller Nürnberg’s modular concepts and intelligent automations which allow flexible reactions to changeable market requirements. Edelmann Technology brings new high speed winder systems for increased production rates and new concepts for reducing contamination in products. ISRA Surface Vision will present 100% inline optical surface inspection methods for quality control and process optimisations. Another product to watch out for is Kufner’s xShield®, a lightweight, soft textile with 99% shielding efficiency against electromagnetic radiation.

Other big names in the German Pavilion include Autefa Solutions, Brückner Textile Technologies, Dornier Lindauer, IBENA, J.H. Ziegler, Kufner, Perlon and more.

Belgium Pavilion returns along with a Czech Republic debut
Organised by Fedustria (Belgian Textile, Woodworking and Furniture Industry Federation), the Belgium Pavilion will include textile recycling company Belrey Fibres, engineered fabrics by Pennel & Flipo for marine and rescue industries, as well as leading coating specialists Vetex who will feature a variety of functional tapes, and R&D institute Centexbel who carry out research projects across the entire textile and polymer production chain.

The new Czech Republic Pavilion organised by ATOK, the Association of Textile-Clothing–Leather Industry, will showcase three exhibitors who will provide solutions for technical yarn, fabric processing and nonwoven fabrics. These include: GF Machinery, showcasing R&D and production of special machines and lines for glass / basalt yarn and fabric processing; Retex’s nonwoven needle-punched and air laid textiles; and STAP, Europe’s biggest manufacturer of narrow fabrics.

The Cinte Techtextil China fair is recognised by European manufacturers as a gateway to the Asian market. With investment from China boosting the technical textile industry, and more Asian countries than ever developing their technical markets, Cinte Techtextil China 2018 is set to be a hub of business potential.