From the Sector

Reset
57 results
Water-Free Dye by GTT and Golden Long John Photo Green Theme Technologies
20.11.2024

Water-Free Dye by GTT and Golden Long John

Substituting dry curing for traditional water-based techniques, these new textile production solutions greatly reduce water-borne pollution: Green Theme Technologies (GTT), creators of the waterless and PFAS-free EMPEL® textile finishing platform, has teamed up with Golden Long John to promote the next generation of cleaner and more efficient fabric dye and finishing processes.

The textile manufacturing industry generates trillions of gallons of wastewater each year. Traditional textile dyeing and finishing rinses chemical dyes and water repellency onto fabrics. Post-production toxic water is then dumped into rivers and oceans.

Last year, Golden Long John, a major textile supplier of the global footwear industry, introduced GTT’s EMPEL® finishing platform in their Vietnam factories. Their partnership has led to the combination of their two industry leading technologies, the EMPEL® high performance water repellent finish and Golden Long John’s direct dye process.

Substituting dry curing for traditional water-based techniques, these new textile production solutions greatly reduce water-borne pollution: Green Theme Technologies (GTT), creators of the waterless and PFAS-free EMPEL® textile finishing platform, has teamed up with Golden Long John to promote the next generation of cleaner and more efficient fabric dye and finishing processes.

The textile manufacturing industry generates trillions of gallons of wastewater each year. Traditional textile dyeing and finishing rinses chemical dyes and water repellency onto fabrics. Post-production toxic water is then dumped into rivers and oceans.

Last year, Golden Long John, a major textile supplier of the global footwear industry, introduced GTT’s EMPEL® finishing platform in their Vietnam factories. Their partnership has led to the combination of their two industry leading technologies, the EMPEL® high performance water repellent finish and Golden Long John’s direct dye process.

“We believe, Cleaner IS Better and this is a big step forward for the fashion and textile industries,” said Martin Flora, President of GTT Business Development. “Similar to GTT’s EMPEL® application, Golden Long John applies dye chemistry directly onto fabrics. Better performance with much less pollution is our vision for the future.”

Source:

Green Theme Technologies

Monforts Montex stenters and coating units for the fabric finishing industry. Photo: Monforts
Monforts Montex stenters and coating units for the fabric finishing industry.
02.10.2024

Monforts celebrates 140 years

Monforts recently celebrated its 140th anniversary at a special event for staff and their families at its headquarters in Mönchengladbach, Germany. Building on a rich history since its foundation by August Monforts in 1884, the company remains 100% dedicated to the development of technologies that will ensure the future success of its textile industry customers.

Under the motto, ‘140 Years of Performance, Innovation and Partners’, Monforts is looking forward to further celebrating this milestone with its representatives and customers at the forthcoming ITMA Asia + CITME exhibition in Shanghai from October 14-18, in Hall 5 at stand C09.

The first Monforts machines were mechanical napping units for raising the surfaces of cotton fabrics, providing softness and warmth and adding value. By 1893, Monforts 24-roller napping machines were drawing appreciative crowds at the World Fair in Chicago – establishing international trade networks was paramount to the company from the outset.

Monforts recently celebrated its 140th anniversary at a special event for staff and their families at its headquarters in Mönchengladbach, Germany. Building on a rich history since its foundation by August Monforts in 1884, the company remains 100% dedicated to the development of technologies that will ensure the future success of its textile industry customers.

Under the motto, ‘140 Years of Performance, Innovation and Partners’, Monforts is looking forward to further celebrating this milestone with its representatives and customers at the forthcoming ITMA Asia + CITME exhibition in Shanghai from October 14-18, in Hall 5 at stand C09.

The first Monforts machines were mechanical napping units for raising the surfaces of cotton fabrics, providing softness and warmth and adding value. By 1893, Monforts 24-roller napping machines were drawing appreciative crowds at the World Fair in Chicago – establishing international trade networks was paramount to the company from the outset.

In 1897, August Monforts established an iron foundry equipped with hydraulic casting machines, by which time the company employed 1,200 people. This was followed by the introduction of semi-automatic manufacturing tools – an area in which Monforts achieved a number of firsts, such as the single-spindle lathe which became a big export hit in the late 1930s due to its unique and unmatched precision.

Overseen by successive four generations of the Monforts family, the company’s range of textile machines has been significantly expanded based on decades of accumulated know-how and a dominant position in fabric finishing technologies has been established.

Since 2013, Monforts has been a member of the CHTC Fong’s Group, today one of the world’s largest textile machinery manufacturers.

Since its opening in 2013, the Monforts Advanced Technology Centre (ATC) in Mönchengladbach has proved a valuable resource to customers for achieving new standards in fabric finishing.

Over an area of 1,200 square metres, it houses two full finishing lines, engineered to accommodate an extremely diverse range of processes, in addition to a Thermex range for the continuous dyeing of denim and other woven fabrics, a full colour kitchen and a number of lab-scale systems for smaller batch trials.

“The ATC allows our customers to test their own textiles and technical fabrics on Monforts dyeing and finishing machines under fully confidential, real production conditions,” says Monforts Technologist Saskia Kuhlen. “Using the results from these trials, we are also able to make recommendations for improving many fabric finishes.”

Source:

Monforts

Photo AWOL
25.09.2024

Monforts, Archroma and BW Converting’s Baldwin Technology - partnership in sustainable textile finishing

A collaboration that unites Monforts’ dyeing and finishing equipment, BW Converting’s Baldwin TexCoat G4™ digital spray technology and Archroma’s chemistries towards sustainable solutions is charting the course for the future of sustainable textile finishing.

Together, the three companies will support dyeing and finishing manufacturers, a critical part of the textile supply chain, in their development projects, boosting the quality and performance of their finished products, while at the same time maximizing the productivity and resource utilization of the finishing application process.  

Kicking off the partnership in the second half of this year, Monforts will install BW Converting’s full-width Baldwin TexCoat digital spray unit on a stenter frame at its Advanced Technology Center (ATC) at its headquarters in Mönchengladbach, Germany.

A collaboration that unites Monforts’ dyeing and finishing equipment, BW Converting’s Baldwin TexCoat G4™ digital spray technology and Archroma’s chemistries towards sustainable solutions is charting the course for the future of sustainable textile finishing.

Together, the three companies will support dyeing and finishing manufacturers, a critical part of the textile supply chain, in their development projects, boosting the quality and performance of their finished products, while at the same time maximizing the productivity and resource utilization of the finishing application process.  

Kicking off the partnership in the second half of this year, Monforts will install BW Converting’s full-width Baldwin TexCoat digital spray unit on a stenter frame at its Advanced Technology Center (ATC) at its headquarters in Mönchengladbach, Germany.

“Our ATC already houses two full Montex stenter finishing lines engineered to accommodate an extremely diverse range of processes, in addition to a Thermex range for the continuous dyeing of denim and other woven fabrics, a full color kitchen and a number of lab-scale systems for smaller batch trials,” explained Monforts Junior Technologist Saskia Kuhlen. “It enables our customers to test their own textiles and technical fabrics under fully confidential, real production conditions and using the results from these trials we are also able to make recommendations for improving many fabric finishes. The new TexCoat installation will make an important contribution to what we can achieve.”
 
TexCoat G4 revolutionizes the traditional water- and energy-intensive pad-dry-cure finishing process by precisely applying chemistry including softeners, antimicrobials, durable water repellents, flame retardants, resins and most other water-based chemicals across the textile surface only where it is required, on one or both sides of the fabric. The system can therefore reduce water, chemistry and energy consumption by up to 50% compared to traditional pad application processes.

The TexCoat G4 installation brings together the surface functions, fabric transport and thermal processing technology of Monforts stenter frames with Archroma’s specialty chemicals, applied with TexCoat’s contactless precision, to achieve optimum absorption and maximum efficacy, exceeding the performance of traditional pad applications.

“Archroma’s commitment to advancing sustainability solutions for technical textiles has led to a pivotal partnership with Baldwin, where the benefits of contactless precision spray combined with our innovative solutions have helped textile manufacturers achieve greater energy and water savings,” said Michael Schuhmann, Global Marketing Segment Manager for Technical Textiles, Archroma Textile Effects. “We are thrilled to take the partnership to the next level with the integration of a renowned equipment expert. Together, we will bring the best of our expertise in sustainable technologies to our customers around the world.”

“Baldwin has enjoyed a great relationship with Monforts and Archroma over the last few years,” added Rick Stanford, Baldwin’s Vice-President of Business Development for Textiles “Individually, we are working hard to assist our customers to achieve their sustainability and environmental targets but this is the first time the three companies have committed to working together with a focus on bringing transformative change to the dyeing and finishing space. It will result in significantly lower energy, chemical and water consumption with increased productivity and higher quality.  We strongly believe that this partnership will be greater than the sum of its parts.”

Beyond textile finishing, Monforts, Baldwin and Archroma will work together to develop a versatile offering that will include coloration concepts and in the not-too-distant future the partners additionally plan to expand their collaboration to continuous spray dye applications developed by Baldwin.

Photo: Archroma
03.09.2024

Archroma, Kipaş Denim and Jeanologia collaborate for new finishing process

Archroma, specialist in chemicals towards sustainable solutions, Kipaş Denim, a Turkish company with a focus on integrated textile production, and Jeanologia, a sustainable textile solutions company, are collaborating to pioneer a new denim finishing process for enhanced aesthetic appeal and greater sustainability.

Combining their advanced technologies, the three textile innovators are behind the launch of Kipaş Denim’s new Contra Denim concept – a breakthrough in denim dyeing and finishing that enables brands to create stunning and long-lasting distressed looks and designs effects, including intricate patterns, whiskering and fades, through cleaner processes that save water and energy and reduce greenhouse gas emissions.

Denim has traditionally been challenging to produce, especially for black and indigo fabric with a worn or distressed look, requiring significant water usage, harmful chemicals and intensive manual labor. The Contra Denim collection is laser- and laundry-friendly, with colors that are deep and durable. Stunning wash-down vintage effects and high contrasts are achieved via washing or laser techniques.

Archroma, specialist in chemicals towards sustainable solutions, Kipaş Denim, a Turkish company with a focus on integrated textile production, and Jeanologia, a sustainable textile solutions company, are collaborating to pioneer a new denim finishing process for enhanced aesthetic appeal and greater sustainability.

Combining their advanced technologies, the three textile innovators are behind the launch of Kipaş Denim’s new Contra Denim concept – a breakthrough in denim dyeing and finishing that enables brands to create stunning and long-lasting distressed looks and designs effects, including intricate patterns, whiskering and fades, through cleaner processes that save water and energy and reduce greenhouse gas emissions.

Denim has traditionally been challenging to produce, especially for black and indigo fabric with a worn or distressed look, requiring significant water usage, harmful chemicals and intensive manual labor. The Contra Denim collection is laser- and laundry-friendly, with colors that are deep and durable. Stunning wash-down vintage effects and high contrasts are achieved via washing or laser techniques.

Contra Denim is based on Archroma’s DENIM HALO, a new approach to denim production that incorporates resource-saving pretreatment that includes DIRSOL® RD and dyeing processes to produce easy-wash laser-friendly denim. It delivers a substantially reduced environmental footprint compared to the industry-standard denim finishing process while reducing yarn shrinkage and improving garment tensile strength.

The Contra Denim’s vintage looks are achieved with advanced laser marking technology from Jeanologia. Thanks to the combination of Archroma and Jeanologia technologies, manual hand scraping or potassium permanganate spraying harmful for workers and the environment are completely eliminated.

Fernando Cardona, Brain Box Team Manager, Jeanologia, said: “As a purpose-driven textile technology company, we take pride in working with partners to accompany them through their transformational processes. We are delighted to work with industry leaders such as Archroma and Kipaş Denim, who are at the forefront of responsible denim production.”

Initially producing a ContraBlack Denim collection, Kipaş Denim has now extended the Contra line to classic indigo and other colors from the DIRESUL® RDT range.

The ContraBlack collection earned a Jeanologia Environmental Impact Measurement (EIM) score of 11 on stone wash versus the ring dyeing market standard score of 67. This confirms the low impact of the ContraBlack range in both water and energy consumption, chemical impact and workers’ health.

Source:

Archroma

Monforts and Uniferro join forces at Febratex 2024 (c) Monforts
15.07.2024

Monforts and Uniferro join forces at Febratex 2024

Finishing machinery specialist Monforts will exhibit at the upcoming Febratex textile machinery exhibition taking place in Blumenau, Brazil, from August 20-23, along with Uniferro, its new regional partner.

This new alliance follows the retirement of Herbert Erdmann of the service agency Euro Texteis, who has worked with Monforts over more than 30 years to secure a leading position in the region for Montex stenter dryers, Thermex dyeing ranges and associated finishing technology.

With offices in Sao Paulo and Ceara and sub-agents across Brazil, Uniferro has been active in the textile industry for over 50 years.

coaTTex
At Febratex, Monforts will introduce its latest coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coater is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts Montex stenter systems.

Finishing machinery specialist Monforts will exhibit at the upcoming Febratex textile machinery exhibition taking place in Blumenau, Brazil, from August 20-23, along with Uniferro, its new regional partner.

This new alliance follows the retirement of Herbert Erdmann of the service agency Euro Texteis, who has worked with Monforts over more than 30 years to secure a leading position in the region for Montex stenter dryers, Thermex dyeing ranges and associated finishing technology.

With offices in Sao Paulo and Ceara and sub-agents across Brazil, Uniferro has been active in the textile industry for over 50 years.

coaTTex
At Febratex, Monforts will introduce its latest coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coater is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and black-out coating.

Denim hub
Brazil remains a buoyant hub for textile manufacturing with a particular stength in the denim dyeing and finishing sector and many Monforts Thermex hotflue dyeing systems are already operational in the region, reaping the benefits of the Econtrol® process.

Econtrol® is a continuous process for the dyeing of woven cotton and cellulosic fabrics, especially denim, in which reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes.

“Differentiation is the key in the highly-competitive denim fabrics industry, whether through the successful incorporation of new fibres, accommodating new fabric constructions or exploring the many options for how to treat them at the finishing stage, to gain a market advantage,” says says Monforts Regional Sales Manager Achim Gesser. “Our lines allow users to be extremely versatile and respond quickly to market demand, while also allowing very short production runs.”

Because finishing is a particularly energy-intensive part of the textile production chain, it is exactly where convincing results can be achieved, he adds, and Monforts has developed a wide range of energy-saving. These included a range of heat recovery systems, such as the Universal Energy Tower and the ECO Booster. Both can also be retrofitted to existing ranges to make production more resource-efficient and economical, yet without having to invest in a new machine.

“Energy costs tend to be high in Brazil and can account for up to 70% of production costs for our customers, so there is great demand for ways of saving money,” says Gesser. “Cutting energy usage also helps in terms of global warming and reducing carbon footprint, of course, so these latest technologies are a win-win for fabric finishers. As we look forward to a promising partnership with Uniferro in Brazil, we would like to extend our thanks and best wishes for the future to Herbert Erdmann for his hard work over the years.”

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

10.07.2024

Coloreel Group AB files for bankruptcy

Coloreel Group AB, a pioneering Swedish technology company known for its instant thread dyeing technology, today announced that it has filed for bankruptcy. The decision comes after the company's inability to develop its business volume quickly enough and, related to this, secure the necessary financing.

Despite many in-depth discussions with financial investors and potential industrial partners to secure additional funding, Coloreel has been unable to overcome its financial hurdles.

Coloreel has aimed to transform the textile industry with unique coloring and design possibilities through a sustainable and efficient thread dyeing process. The company has over 90 customers in the global market, many of them well-known brands. Over 120 granted patents across 45 markets ensure robust protection of the innovative technology.

Coloreel Group AB, a pioneering Swedish technology company known for its instant thread dyeing technology, today announced that it has filed for bankruptcy. The decision comes after the company's inability to develop its business volume quickly enough and, related to this, secure the necessary financing.

Despite many in-depth discussions with financial investors and potential industrial partners to secure additional funding, Coloreel has been unable to overcome its financial hurdles.

Coloreel has aimed to transform the textile industry with unique coloring and design possibilities through a sustainable and efficient thread dyeing process. The company has over 90 customers in the global market, many of them well-known brands. Over 120 granted patents across 45 markets ensure robust protection of the innovative technology.

"It is with a heavy heart that we announce the filing for bankruptcy today. We have been working very hard to introduce a new technology and new ways of working on the global textile market. Despite relentless efforts to grow the business, minimize operational costs, and secure additional funding, the challenges are too great. The board and the management are incredibly proud of what our team has achieved, and we are grateful for the support we have received from our partners, customers, and investors”, states Anders Persson, Chairman of the Board, Coloreel Group AB.

The filing also applies for the daughter company Coloreel AB.

Source:

Coloreel

Graphic CHT Germany GmbH
28.02.2024

PERFORMANCE DAYS: CHT presents sustainable textile innovations

At the PERFORMANCE DAYS Functional Fabric Fair in Munich on 20 and 21 March 2024, CHT will present its latest sustainable textile technologies with a focus on dyeing and effect chemicals.

These products are used to finish textiles with special functions such as water repellency, breathability and efficient moisture transport. Significant amounts of water and energy can be saved during the dyeing and finishing process, resulting in a lower CO2 footprint.

In addition to effect chemicals, CHT will be presenting its dyeing products with a focus on the use of bio-based, biodegradable and recycled materials to support the circular economy.

At the PERFORMANCE DAYS Functional Fabric Fair in Munich on 20 and 21 March 2024, CHT will present its latest sustainable textile technologies with a focus on dyeing and effect chemicals.

These products are used to finish textiles with special functions such as water repellency, breathability and efficient moisture transport. Significant amounts of water and energy can be saved during the dyeing and finishing process, resulting in a lower CO2 footprint.

In addition to effect chemicals, CHT will be presenting its dyeing products with a focus on the use of bio-based, biodegradable and recycled materials to support the circular economy.

Source:

CHT Germany GmbH

Archroma: Launch of AVITERA® SE GENERATION NEXT (c) Archroma
02.02.2024

Archroma: Launch of AVITERA® SE GENERATION NEXT

Archroma has made its AVITERA® SE technology accessible to more brands and mills with the launch of AVITERA® SE GENERATION NEXT for more cost-effective sustainable dyeing of cellulosic fibers and blends.

With an improved cost-to-performance ratio for new dark and extra-dark shades, the AVITERA® SE GENERATION NEXT range helps mills produce differentiated end articles that comply with the environmental requirements of leading brands and retailers while increasing yield, improving productivity and reducing processing costs.

With high-speed low-temperature wash-off, high process reliability and great reproducibility, AVITERA® SE Generation Next allows mills to achieve water and energy savings of up to 50% and to slash CO2 emissions and effluent discharge by up to 50% as well. It can also increase mill output by up to 25% or more. The dyes are free from arylamines, including PCA[1], and offer fastness properties, retaining their colors through repeated home laundering and exposure to light, perspiration and chlorine.

Three new dark colors have been added to the AVITERA® SE range:

Archroma has made its AVITERA® SE technology accessible to more brands and mills with the launch of AVITERA® SE GENERATION NEXT for more cost-effective sustainable dyeing of cellulosic fibers and blends.

With an improved cost-to-performance ratio for new dark and extra-dark shades, the AVITERA® SE GENERATION NEXT range helps mills produce differentiated end articles that comply with the environmental requirements of leading brands and retailers while increasing yield, improving productivity and reducing processing costs.

With high-speed low-temperature wash-off, high process reliability and great reproducibility, AVITERA® SE Generation Next allows mills to achieve water and energy savings of up to 50% and to slash CO2 emissions and effluent discharge by up to 50% as well. It can also increase mill output by up to 25% or more. The dyes are free from arylamines, including PCA[1], and offer fastness properties, retaining their colors through repeated home laundering and exposure to light, perspiration and chlorine.

Three new dark colors have been added to the AVITERA® SE range:

  • AVITERA® BLACK PEARL SE: A greenish-cast black dye with high color consistency that can be used to correct metamerism.
  • AVITERA® BLUE HORIZON SE: A deep blue element with good light fastness in medium to deep shades, as well as high oxidative fastness and high resistance to nitrogen oxides (NOx) in the atmosphere.
  • AVITERA® NIGHT STORM SE: A new navy shade with a greenish cast and strong build up. It is recommended for dyeing the deepest navy and combination shades.

[1] Non-detectable on the garment

13.12.2023

Artistic Milliners and Archroma: Eco-advanced sulfur black dyeing for denim

International denim manufacturer Artistic Milliners and Archroma are collaborating to rewrite the future of denim. Leveraging Archroma’s DIRESUL® EVOLUTION BLACK dyestuff, the partners are promoting more eco-advanced sulfur black dyeing for denim with a variety of washdown effects and reduced environmental impact.

DIRESUL® EVOLUTION BLACK delivers outstanding resource savings, using less water and energy and producing less CO2 during dye synthesis. Furthermore, it offers unique shade and washdown behavior compared to standard black dyes to consistently create eye-catching aesthetics, especially on dark black shades with no bronzing effect. It is also laser-friendly.

Artistic Milliners launched a capsule collection based on the new DIRESUL® EVOLUTION BLACK technology at Kingpins Amsterdam in October, named EVO BLACK, winning a positive response from global brands. It is now working closely with a research and innovation team from Archroma, its technology partner of many decades, to expand its use of the new black coloration system in combination with other colors and performance effects.

International denim manufacturer Artistic Milliners and Archroma are collaborating to rewrite the future of denim. Leveraging Archroma’s DIRESUL® EVOLUTION BLACK dyestuff, the partners are promoting more eco-advanced sulfur black dyeing for denim with a variety of washdown effects and reduced environmental impact.

DIRESUL® EVOLUTION BLACK delivers outstanding resource savings, using less water and energy and producing less CO2 during dye synthesis. Furthermore, it offers unique shade and washdown behavior compared to standard black dyes to consistently create eye-catching aesthetics, especially on dark black shades with no bronzing effect. It is also laser-friendly.

Artistic Milliners launched a capsule collection based on the new DIRESUL® EVOLUTION BLACK technology at Kingpins Amsterdam in October, named EVO BLACK, winning a positive response from global brands. It is now working closely with a research and innovation team from Archroma, its technology partner of many decades, to expand its use of the new black coloration system in combination with other colors and performance effects.

Archroma and Somelos to advance textile industry sustainability with new dyeing and finishing process Photo: Somelos
23.06.2023

Archroma and Somelos: New dyeing and finishing process for water savings of up to 97%

Archroma, a leader in specialty chemicals towards sustainable solutions, and Somelos, a vertically integrated textile group in Portugal, have joined forces to advance sustainable cotton processing with a new water-saving dyeing and finishing process that generates no wastewater.

Conventional cotton dyeing and finishing requires substantial water and chemical inputs and produces a large volume of wastewater. Long-lasting wash-down effects in particular, traditionally require two water-intensive processes: one to get the color intensity and one to achieve the washed-down contrast. Relying on such resource-intensive processes is of particular concern in nations affected by drought and water scarcity, like Portugal, the home of Somelos since its founding in 1958.

Archroma, a leader in specialty chemicals towards sustainable solutions, and Somelos, a vertically integrated textile group in Portugal, have joined forces to advance sustainable cotton processing with a new water-saving dyeing and finishing process that generates no wastewater.

Conventional cotton dyeing and finishing requires substantial water and chemical inputs and produces a large volume of wastewater. Long-lasting wash-down effects in particular, traditionally require two water-intensive processes: one to get the color intensity and one to achieve the washed-down contrast. Relying on such resource-intensive processes is of particular concern in nations affected by drought and water scarcity, like Portugal, the home of Somelos since its founding in 1958.

To address this challenge, Archroma and Somelos have now developed the New Dry Dyeing/Ox Finishing process for the production of bottoms and shirting in cotton fabrics. Based on Archroma’s Pad-Ox dyeing process, which combines oxidation and fixation into one step, and the latest technologies for washdown effects, including ozone and laser treatments, it delivers water savings of up to 97% compared to conventional cotton dyeing and finishing.

The New Dry Dyeing/Ox Finishing process only uses water to prepare the dye and oxidation baths. Archroma Diresul® RDT liquid pre-reduced sulfur dyes ensure easy washdown and direct fixation—with no need for pre-washing—delivering shorter processing, cleaner production and high wash -fastness.

Photo: Pulcra Chemicals
19.06.2023

Pulcra Chemicals and Inditex develop Dyeing Process

Pulcra Chemicals and Inditex develop Sustineri Coloring, a combined pretreatment and dyeing process for cotton and polyester/cotton resulting in water, time and energy savings. This process is the result of a joint research between Pulcra Chemicals and Inditex with the goal to mitigate the impact of standard dyeing processes and to reduce the use of natural resources.

Sustineri Coloring is based on newly engineered process chemicals which allow a one bath pretreatment and dyeing process for dark, medium and light shades of cotton and polyester/cotton fabrics by exhaust method. This results in shorter processing time and less use of water and energy.

The process is already used by selected mills and it showed that Sustineri Coloring is reducing in pretreatment and dyeing the processing time by up to 60 % and the water and energy consumption by up to 80 and 60% respectively. The state-of-the-art products allow a one bath treatment which is the key in saving resources.

Pulcra Chemicals and Inditex develop Sustineri Coloring, a combined pretreatment and dyeing process for cotton and polyester/cotton resulting in water, time and energy savings. This process is the result of a joint research between Pulcra Chemicals and Inditex with the goal to mitigate the impact of standard dyeing processes and to reduce the use of natural resources.

Sustineri Coloring is based on newly engineered process chemicals which allow a one bath pretreatment and dyeing process for dark, medium and light shades of cotton and polyester/cotton fabrics by exhaust method. This results in shorter processing time and less use of water and energy.

The process is already used by selected mills and it showed that Sustineri Coloring is reducing in pretreatment and dyeing the processing time by up to 60 % and the water and energy consumption by up to 80 and 60% respectively. The state-of-the-art products allow a one bath treatment which is the key in saving resources.

Source:

Pulcra Chemicals

FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale © Foto: Indorama Ventures Fibers Germany GmbH / FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale
06.06.2023

Trevira CS at the Cruise Ship Interiors Design Expo Americas in Miami

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Source:

Indorama Ventures Fibers Germany GmbH

21.04.2023

REVECOL® by ERCA: Textile chemical auxiliaries obtained from vegetable oils

REVECOL® (Recycled Vegetable Cooking Oil) represents a new generation of textile chemical auxiliaries, which are high-performing and obtained from vegetable exhausted cooking oil.

Chemical auxiliaries play a crucial role in several stages of the textile production cycle, from material preparation to dyeing and finishing, but represent a complex challenge from the point of view of reducing environmental impact. Herein lies the revolutionary aspect of REVECOL® by ERCA: for the first time, not just one product, but a complete range of auxiliary chemicals is available that meets the criteria of circularity.

The result of ERCA's continuous research, REVECOL® are in fact born from critical waste materials (exhausted vegetable oils), which, thanks to an environmentally and safety-friendly manufacturing process, are transformed into a line of innovative chemical auxiliaries destined for the entire textile industry and its various applications: from underwear to home textiles.

REVECOL® (Recycled Vegetable Cooking Oil) represents a new generation of textile chemical auxiliaries, which are high-performing and obtained from vegetable exhausted cooking oil.

Chemical auxiliaries play a crucial role in several stages of the textile production cycle, from material preparation to dyeing and finishing, but represent a complex challenge from the point of view of reducing environmental impact. Herein lies the revolutionary aspect of REVECOL® by ERCA: for the first time, not just one product, but a complete range of auxiliary chemicals is available that meets the criteria of circularity.

The result of ERCA's continuous research, REVECOL® are in fact born from critical waste materials (exhausted vegetable oils), which, thanks to an environmentally and safety-friendly manufacturing process, are transformed into a line of innovative chemical auxiliaries destined for the entire textile industry and its various applications: from underwear to home textiles.

EVECOL® by ERCA has obtained several certifications – GRS, RCS, listed into ZDHC Chemical Gateway, bluesign® and GOTS, and are also finalizing the third-party certified PCF (Product Carbon Footprint), - as well as various international recognitions – first prize RESPONSIBLE CARE®, in Italy, from Federchimica, inclusion in the BAT (Best Available Techniques) document from the European Community.

(c) BTMA
22.03.2023

BTMA welcomes digital dyeing and finishing company Alchemie

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Similar energy savings can be achieved with the Novara precision finishing system which utilises a nozzle array to deliver finishing chemistry with millimetre resolution. Finishing chemistries penetrate deeply into the fabric due to the combination of high velocity liquid jetting and precisely-controlled vacuum and textile finishes are applied only where needed, reducing chemistry usage and enabling multi-functionality.

In the past year, Alchemie, backed by Swedish fashion giant H&M, has established a first demonstration hub at customer JSRTEX in Taiwan. It is now progressing plans to set up further centres at customer sites around the world.

Source:

BTMA / AWOL Media

(c) ECOSENSOR™ by Asahi Kasei
18.11.2022

Asahi Kasei Group celebrates 100 years at ISPO Munich 2022

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

New this season is the application of the RespiGard™ by Polypore unique membrane designed for outdoor apparel. Its innovative pore structure is too small for water droplets to penetrate but features high porosity that allows for airflow and moisture evaporation.

In order to show at best the performances and possible applications of the fabrics made with RespiGard™, ECOSENSOR™ will feature at its ISPO space an ad hoc created outfit by the outerwear brand.

Furthermore, the majority of ECOSENSOR™ fabrics are made with sustainable ingredients which are certified by international certifications such as GRS and RCS through a traceable and transparent production process and supply chain.  100% of the stretch articles (representing 35% of the collection) are made with ROICA™ EF by Asahi Kasei, the recycled stretch yarn made from pre-consumer materials. Even the dyeing and finishing phases - key moments for performancewear - have been certified by international labels such as bluesign® or OEKO-TEX® Standard 100.

Source:

ECOSENSOR™ by Asahi Kasei / C.L.A.S.S..

Photo: Officina39
27.10.2022

Dyeing for good: Officina39 part of design events in Amsterdam

The Italian company offers its dyeing technology for practical and theoretical design explorations at the Fashion For Good Museum in Amsterdam.

On Saturday October 22nd in Amsterdam, Andrea Venier, Officina39 Managing Director, took part in the Denim & Dyeing seminar to talk about Recycrom™, the patented revolutionary and sustainable dyestuffs range obtained through an innovative upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing applications.

The seminar was organized inside the Fashion For Good Museum by the Stichting Textielcommissie Nederland, together with a Design Challenge to which took part a selection of young designers who have explored Recycrom™’s colorful potential in their creations. The winning designs are exposed in a 2-week pop-up show at Fashion For Good Museum.

The Museum is also hosting the “Knowing Cotton Otherwise” exhibition, that highlights the relationship between cotton and the fashion industry, the role of cotton in an increasingly intertwined web of global cultures, and the sustainable innovations driving its circular transformation.

The Italian company offers its dyeing technology for practical and theoretical design explorations at the Fashion For Good Museum in Amsterdam.

On Saturday October 22nd in Amsterdam, Andrea Venier, Officina39 Managing Director, took part in the Denim & Dyeing seminar to talk about Recycrom™, the patented revolutionary and sustainable dyestuffs range obtained through an innovative upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing applications.

The seminar was organized inside the Fashion For Good Museum by the Stichting Textielcommissie Nederland, together with a Design Challenge to which took part a selection of young designers who have explored Recycrom™’s colorful potential in their creations. The winning designs are exposed in a 2-week pop-up show at Fashion For Good Museum.

The Museum is also hosting the “Knowing Cotton Otherwise” exhibition, that highlights the relationship between cotton and the fashion industry, the role of cotton in an increasingly intertwined web of global cultures, and the sustainable innovations driving its circular transformation.

Innovative solutions from Fashion for Good Innovators Oritain and Officina39, which tackle some of the challenging aspects of cotton’s production such as origin and traceability, dyeing and water use, are also used by the artists in their installations. Three of them have been inspired by the ecofriendly dyeing potential of Recycrom™: the protagonist of the meeting between art and fashion, sustainability and design, past, present and future of the industry. The first artist that has challenged herself is Caithlin Courtney Chong, who has realized an artwork installation with Recycrom™ in the print room, and a suggestive installation dedicated to Officina39’s sustainable dyestuffs.

Source:

Officina39

Photo: Monforts
The new seven chamber Montex TwinAir stenter range with Montex®Coat coating at the plant.
26.10.2022

Dolinschek: Compression stockings in a variety of colours

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The Dolinschek brothers moved their business to the historic site of the former Ambrosius Heim textile company in Burladingen in 2001 in order to expand. At the time, the company – founded by their father in 1980 as a textile wholesaler before moving into dyeing – employed just 13 people. Within a year, the company had bought additional space at the site.

Now, with Theo in charge of technology and sales, and Erwin responsible for production, the company employs almost 100 people and operates on an integrated site of 35,000 square metres.

In 2005, a laminating department was established by the company and since 2012 investment in knitting machines has been ongoing.

“The further we went into vertical integration, the more of our own products we were able to position on the market and so we were also able to make ourselves more independent,” says Theo. “We have continued to develop and today we can produce high-quality fabrics for many fields, with 42 knitting machines, 36 dyeing machines, three stenter frames and many other production and processing machines.”

Dolinschek has also developed its own proprietary TMG dyeing machines which have subsequently been successfully sold to many other companies all over the world. There are currently 11 of these machines  in operation at the Burladingen site and around 45 installed at other companies.

For finishing technology, however, the company relies on Monforts, and has installed a new seven chamber Montex TwinAir stenter range with a Montex®Coat coating unit in knife execution, enabling the coating of dimensionally stable knitted fabrics with polyurethane or acrylate. Another unique feature is the Teflon-coated (non-stick) transportation belt through the system.

The Montex line is also equipped with integrated heat recovery and exhaust gas purification to ensure the most resource-efficient processing available on the market. The exhaust air goes from the Monforts heat recovery system into an existing air/water heat recovery system and then into an electrostatic precipitator.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily.

 

More information:
Dolinschek Monforts
Source:

AWOL Media

TAD Teintures et Apprêts Danjoux Photo TAD Teintures et Apprêts Danjoux
TAD Teintures et Apprêts Danjoux
06.10.2022

Coisne et Lambert: Acquisition of TAD Teintures et Apprêts Danjoux

Coisne et Lambert, the group composed of the two companies TDV Industries and Klopman International, a leader in the production and marketing of technical fabrics for the professional clothing and PPE sector, announced the acquisition of TAD Teintures et Apprêts Danjoux.

TAD is specialized in the dyeing and finishing of knitted fabrics and has been in the market for over 30 years. Based in Le Coteau (France), the company has a production site of 9,000 m² and is a major player in the civil and administrative markets for technical textiles for professional clothing, medical, sport and apparel.

With a well equipped R&D laboratory, responsive and innovative sampling and production processes, TAD is ISO 14001 certified to manage its environmental performance.

TAD will extend the group's textile know-how adding expertise in knitwear finishing (dyeing, finishing and functionalities). The complimentary nature of their skillsets will allow the three companies to develop synergies for the benefit of their common and specific markets.

Coisne et Lambert, the group composed of the two companies TDV Industries and Klopman International, a leader in the production and marketing of technical fabrics for the professional clothing and PPE sector, announced the acquisition of TAD Teintures et Apprêts Danjoux.

TAD is specialized in the dyeing and finishing of knitted fabrics and has been in the market for over 30 years. Based in Le Coteau (France), the company has a production site of 9,000 m² and is a major player in the civil and administrative markets for technical textiles for professional clothing, medical, sport and apparel.

With a well equipped R&D laboratory, responsive and innovative sampling and production processes, TAD is ISO 14001 certified to manage its environmental performance.

TAD will extend the group's textile know-how adding expertise in knitwear finishing (dyeing, finishing and functionalities). The complimentary nature of their skillsets will allow the three companies to develop synergies for the benefit of their common and specific markets.

This integration will enable TAD to strengthen its specific business model and its services as a French finishing company over the long term, for the benefit of its historical and future customers.

The group, which is made up of the two companies TDV Industries and Klopman International, achieved a turnover of 185 million euros for the 2021-2022 financial year and employs more than 600 people. It also intends to expand its presence in new markets and geographical areas. Klopman International and TDV Industries want to offer markets more complete, flexible and competitive solutions for professional, civil and military clothing.

(c) BRÜCKNER
The project team of BRÜCKNER and HEATHCOAT in BRÜCKNER’s Technology Centre in Leonberg
04.10.2022

BRÜCKNER: New finishing line for British company HEATHCOAT FABRICS

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

The direct gas heated BRÜCKNER POWER-FRAME stenter with its staggered heating source arrangement every half zone provides best available temperature consistency across the length and the width of the stenter. The unit is equipped with a low-lub, horizontally returning combined pin / clip chain and several fabric paths, especially designed for the different fabrics being processed. Together with HEATHCOAT FABRICS technologists, the BRÜCKNER design team developed a special delivery end of the stenter with different edge trimming and slitting possibilities. Depending on the kind of products, the fabrics can be batched on large diameter A-frames, wound on cardboard tubes or plaited into trolleys.

Source:

Brückner Trockentechnik GmbH & Co. KG

(c) Mahlo GmbH + Co. KG
04.05.2022

Altun Tekstil acquires weft straighteners from Mahlo

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

The fully integrated units benefit from universal control technology and the intuitive Mahlo mSmart G15 visualization concept. The HMI has been optimized for userfriendliness. The visualisation concept is constantly enhanced and ready for Industry 4.0. The path to a digital future within Altun is prepared.

Source:

Mahlo GmbH + Co. KG