From the Sector

• Revenues: 239.6 million euros (-4%)*
• EBITDA before non-recurring items: 35.3 million euros (-21%)*
• Net income: 13.9 million euros (-31%)
• Free cash flow before non-recurring items: 16.6 million euros (+13%)

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the first half of 2023, which have been subject to a limited review by the Statutory Auditors.

Comparisons between 2023 and 2022 are based on 2022 exchange rates unless otherwise stated (“like-for-like”). As the impact of the acquisition of TextileGenesis (see press release dated December 8, 2022) on the financial statements for 2023 is not material, like-for-like changes exclude only the variations in exchange rates.

Business Trends and Outlook
In its 2022 Annual Financial Report, published February 8, 2023, Lectra presented its new roadmap for 2023-2025. The Group also specified that 2023 remained unpredictable given the degraded macroeconomic and geopolitical environment, which lead to numerous uncertainties that could continue to weigh upon the investment decisions of its customers.

At the beginning of the year, the Group had set itself objectives of achieving, in 2023, revenues in the range of 522 to 576 million euros and EBITDA before non-recurring items in the range of 90 to 113 million euros.

Given the delay in orders for new systems in the first quarter, and poor visibility on new systems orders for subsequent quarters, the Group reported on April 27 that it now anticipated revenues in the range of 485 to 525 million euros (-5% to +3% at constant exchange rates relative to 2022) and EBITDA before non-recurring items in the range of 78 to 95 million euros (-15% to +3% at constant exchange rates relative to 2022). The Group also noted that despite limited visibility regarding new systems orders over the next few quarters, there is strong visibility regarding recurring revenues, which should enjoy substantial growth and account for 65% of total revenues in 2023. These revised scenarios had been prepared on the basis of the closing exchange rates on April 27, 2023, for the remaining nine months of the year, and particularly $1.10/€1.

The results of the second quarter support these revised objectives.

A 1-cent appreciation of the euro against the U.S. dollar in the second half of the year (at an exchange rate of $1.10/€1) would mechanically decrease revenues by approximately 1.0 million euros and EBITDA before non-recurring items by 0.45 million euros. On the contrary, a 1-cent fall in the euro against the dollar would mechanically raise revenues and EBITDA before non-recurring items by the same amounts.

Because the Group's customers operate in a highly competitive environment that demands they continue to improve performance, their investments will pick up as soon as the macroeconomic situation improves. Lectra's roadmap for 2023-2025, which was launched on January 1, 2023, will enable the Group to take full advantage of the upturn and accelerate its growth.

adidas unveils its new campaign to celebrate the FIFA Women’s World Cup Australia & New Zealand 2023™. The campaign is dedicated to next gen icons Alessia Russo, Lena Oberdorf and Mary Fowler and looks to drive more global attention for the game and inspire other young women and girls to follow in their footsteps.

Marking adidas’ most impactful Women’s World Cup campaign to date, the brand unites its global family of football legends and advocates of the women’s game. Headlined by a series of fast-paced films, the campaign welcomes a star-studded line up of David Beckham, Leon Goretzka and Ian Wright, actor and football fan, Jenna Ortega, as well as Argentina’s World Cup hero, Lionel Messi. They come together to celebrate the skills that Russo, Oberdorf and Fowler are renowned for, from vision and interception to power, creativity and accuracy.

The films are part of a new creative proposition from adidas for the upcoming tournament. ‘Play Until They Can’t Look Away’ aims to platform and showcase some of the world’s greatest football players on the biggest stage – whose skills and passion for the game demand global attention and support.

Set against the soundtrack of SL2’s iconic song, On a Ragga Tip, fans see World Cup winner, Lionel Messi, alongside Mary Fowler, guiding both viewers and Jenna Ortega across the world to Fowler’s home country of Australia , with preparations for the biggest women's sporting moment underway.

Meanwhile, David Beckham and Ian Wright, alongside his granddaughter, Women’s Arsenal FC player, Raphaella Wright-Phillips, are unable to look away in a supermarket as Russo spectacularly weaves her way through the narrow aisles, in her own creative fashion. Finally, Goretzka is expertly interrupted while bowling as Oberdorf whizzes around an arcade, powerfully intercepting balls in each scene to achieve a high score of her own.

Paying respect to those who have gone before, the films are also filled with subtle references to memorable moments that football super fans will revel in, including shirt numbers, iconic tournament balls, plus much more.

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

“Visitor footfall at ITMA 2023 was well beyond the company’s expectations, and we were especially pleased at the constant number of visitors from South American companies, as well as from Asia and Europe,” said Monforts Marketing Manager Nicole Croonenbroek. “We were able to provide them with detailed information about our portfolio of machines and technologies digitally and fielded an unprecedented number of serious enquiries, many of which promise to turn into new business.”

Monforts Montex stenters for processes such as drying, stretching, heat-setting and coating, she added, are already the industry standard for the fabric finishing industry, providing a number of advantages in terms of production throughput and especially in energy efficiency and resource savings. Other key technologies in the Monforts portfolio include relaxation dryers, Thermex dyeing ranges and Monfortex compressive shrinking ranges.

Montex®Coat
“We were also very pleased with the interest in the Montex®Coat, the latest addition to our range of technologies, which we displayed in Milan,” Croonenbroek said.

The Montex®Coat can serve a very diverse number of markets and enables full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments, as well as solvent coatings. Knife coating, roller coating or screen printing can also all be accommodated with this system. It provides the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

Many refinements have been made to the Montex®Coat in the past few years, resulting in higher coating accuracy and the resulting quality of the treated fabrics. A number of advanced new improvements were introduced in Milan, including automatic edge limiters for immediately adapting to new coating widths and a new and simplified hand-held control device. These save considerable time in setting up the machine and ensuring consistent production.

The Montex®Coat unit displayed in Milan was sold to Vietnamese company Thai Tuan during the show.

ITMA 2023 was a successful platform for the flat knitting machine manufacturer STOLL to present its latest new developments. The business unit of the KARL MAYER GROUP will be following up this fair on 3 July with the launch of a further innovation package. With the solutions contained in this package, STOLL will be offering its customers additional added value when using their flat knitting machines - in line with the concept of bundling innovations.

The new features include an optimised central lubrication system that reduces both maintenance effort and oil consumption, this as standard from July 2023 for all models of the CMS and ADF series produced in Reutlingen.
Compared to the previous optional variant, it ensures more efficient and comprehensive lubrication. All needle bed elements, from the holding-down jack to the coupling part and intermediate slider to the selection jack, are now supplied with oil. The machine itself recognises whether lubrication is required. Independently of this, the lubrication intensity and oil distribution can be adapted to the individual machine conditions by setting various parameters, if required. To ensure that the required amount of lubricant is reliably supplied, a message is sent if the level is too low.

In addition, a new oil drain container as standard equipment for all CMS and ADF models catches used oil from the needle bed under the machine. This prevents soiling of floors or knitted fabrics. The emptying of the container can be efficiently managed by an adjustable reminder function. The neat and at the same time sustainable solution does not require cleaning agents or hoovers and offers the possibility to reuse the oil after cleaning through special filters, if necessary.

Users of CMS and ADF belt take-down machines can benefit from optimisations around the belt take-down. Thanks to the new STOLL innovation package, this can be turned forwards and backwards by means of a switch as standard in order to easily eliminate fabric wraps and thus reduce maintenance times. In addition, a mirror, which is also fitted as standard, ensures a simple visual check of the belt take-down.

Another solution of the STOLL innovation package from July 2023 includes new cams that enable split-stitch implementation without cam box modification. This reduces manual effort and thus conversion times and costs. The feature is standard on all fine gauges ADF and CMS machines.

For the W machines from STOLL, there is now a further inlay yarn carrier, the Qt, in addition to the previous Qw yarn carrier. The extension means that the number of inlay yarn carriers used in a system can be increased from the previous one to three. No additional system is required for the weft yarn, and the process steps weft yarn insertion and knitting take place in the same system.

ADVANSA and Asia Pacific Fibers (APF) join forces to launch REMOTION®, a premium fibre for sports and activewear, made from recycled ocean-bound plastic bottles with full end-to-end traceability from Prevented Ocean Plastic™. REMOTION® offers a solution for textiles that merges ocean protection with built-in biodegradability. The fibres break-down in marine environments to prevent microplastic pollution of the oceans, a problem which can be the consequence of fibre-shedding from apparel laundry waste-water.

Remotion® offers a solution with various sustainable features such as biodegradability and recyclability, with customized performance features such as anti-bacterial properties and moisture management built-in to the fibre. Moreover, the fibre is also offered in customer curated colours that guarantee very good colour fastness. Thus, this “all-in-one” fibre contributes to a sustainable and healthy environment with savings in water, energy, chemicals, and CO2. The fibre is available in a range of filament and staple options with two variants: REMOTION® Blue made from ocean-bound plastic bottles, REMOTION® Green made from domestic recycled plastic bottles.

REMOTION® Blue is a specially engineered polyester fibre made from ocean-bound plastic as a premium raw material with a social aspect. ADVANSA and APF are cooperating with Prevented Ocean Plastic™, a global recycling initiative that helps tens of thousands of people around the world to clean their coastlines, prevent ocean plastic pollution and earn additional income. Discarded plastic bottles are picked up by plastic collectors from coastal areas at risk of ocean plastic pollution and are taken to collection centres. The plastic bottles are then sorted out, cleaned and processed into raw material flakes which are used as a premium ingredient for REMOTION® Blue range of products.

ADVANSA and Asia Pacific Fibers are launching REMOTION® at the Performance Days in Munich from 3-5 October 2023.

With total sales of EUR 1,543 million, generated by over 30 production and sales units in Europe, Asia, and America, Radici Group closed its 2022 financial year with slight growth over 2021. EBITDA reached EUR 157 million in 2022, and net income for the year was EUR 80 million.

“We are moderately pleased with the 2022 figures,” Angelo Radici, president of RadiciGroup, commented. “Despite an unpredictable and challenging year, we were able to achieve positive results. Although the rise in energy costs began to be felt in January, we managed to maintain our position in the first three months of the year due to a significant increase in demand. From the second quarter onwards, the European market experienced a significant slowdown due to the outbreak of war in Ukraine, which exacerbated the already soaring costs of energy and raw materials. The situation was completely out of hand and made worse by the fact that some raw materials were not available. This created significant challenges for us, especially in the chemical sector. We even had to stop operations at our Novara plant in the latter part of the year. Products similar to ours in the nylon supply chain from China and the US were being sold at a price lower than our variable cost.”

The president continues: “At Group level, our internationalisation strategy helped us mitigate geopolitical risks in various countries. As a result, we were able to offset the challenges in the European chemicals and textile markets by leveraging our global presence in High Performance Polymers, where our numbers have held strong. As we began 2023, we regained our footing. However, the global economic and industrial scenario for the rest of the year remains highly uncertain, and forecasts are notably cautious.”

Even in these difficult times, the Group has continued to invest. In 2022, the High Performance Polymers Business Area completed the acquisition in India of the engineering plastics branch of Ester Industries Ltd, a listed company. Additionally, it began installing two new production lines in Mexico and Brazil, and confirmed plans to install a new extrusion line at the Villa d’Ogna production site in the province of Bergamo. These choices align with the Group’s goal of enhancing its worldwide presence and boosting competitiveness in high-potential growth markets. In a year where energy and raw material costs were certainly problematic, operating in geographically diverse markets and with varied applications proved to be an important tool in addressing the challenges. In this vein, a new production site spanning over 36,000 square metres has recently been inaugurated in China. The move is aimed at doubling the production capacity in line with the market’s growth expectations.

Extending the time horizon to 2018-2022, the Group has invested over EUR 277 million to enhance the competitiveness of its companies, implement Best Available Techniques, improve energy efficiency, reduce emissions, and conduct research and development activities aimed at introducing sustainable processes and solutions. These efforts include the research and development activities of Radici InNova, which are heavily focused on the circular economy.

Leaders assembled at the renowned forum for sustainability in fashion to mobilise action and usher in a transformative phase for the industry.

Hosted in the Copenhagen Concert Hall, on 27-28 June, Global Fashion Summit convened over 1000 revered representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark.

This year’s theme ‘Ambition to Action’, galvanised participants to transform ambitions into concrete actions that can drive the industry towards more sustainable practices, both socially and environmentally. Under this premise, the event presented content experiences focused on tangible and evidence-based impact, with over half of the programme dedicated to educational and action-oriented business case studies.

This edition included more speakers and content than ever before, with the dynamic and action-orientated sessions spanning across four different stages. The Summit also facilitated more than 10 strategic roundtable meetings that brought together executives and policy makers for productive dialogues on how to address pressing sustainability issues and act accordingly. The content integrated the five priorities of the Fashion CEO Agenda, alongside critical challenges and tangible opportunities relating to some of the key forces that are shaping the fashion industry today: data, policy and storytelling.

Attendees heard from 137 speakers including HRH The Crown Princess of Denmark; Antoine Arnault, Image & Environment, LVMH Group; Jonathan Anderson, Creative Director & Founder, JW Anderson and Creative Director, Loewe; Virginijus Sinkevičius,  Commissioner for the Environment, Oceans and Fisheries, European Commission; Henriette Hallberg Thygesen, Chief Delivery Officer, Maersk; Aude Vergne, Chief Sustainability Officer, Chloé; Nicolaj Reffstrup, Founder, GANNI; Fanny Moizant, Co-Founder & President, Vestiaire Collective; Noel Kinder, Chief Sustainability Officer, Nike; Óscar García Maceiras, CEO, Inditex; Dr. Lewis Akenji, Managing Director, Hot or Cool Institute; Rachel Arthur, Advocacy Lead, Sustainable Fashion, United Nations Environment Programme; and many more.

Innovation Forum connected fashion companies with sustainable solution providers
This year’s Summit also presented an Innovation Forum, enabling small and large companies to meet with 26 sustainable solution providers – equipping them with the concrete tools to quickly turn words into meaningful actions. More than 350 facilitated business meetings between fashion companies and sustainable solution providers took place during the Summit.

Global Fashion Summit: Boston Edition will take place on 27 September 2023, which will mark the second time the Summit has been hosted outside of Copenhagen in its 14-year history.

Pulcra Chemicals and Inditex develop Sustineri Coloring, a combined pretreatment and dyeing process for cotton and polyester/cotton resulting in water, time and energy savings. This process is the result of a joint research between Pulcra Chemicals and Inditex with the goal to mitigate the impact of standard dyeing processes and to reduce the use of natural resources.

Sustineri Coloring is based on newly engineered process chemicals which allow a one bath pretreatment and dyeing process for dark, medium and light shades of cotton and polyester/cotton fabrics by exhaust method. This results in shorter processing time and less use of water and energy.

The process is already used by selected mills and it showed that Sustineri Coloring is reducing in pretreatment and dyeing the processing time by up to 60 % and the water and energy consumption by up to 80 and 60% respectively. The state-of-the-art products allow a one bath treatment which is the key in saving resources.

Nylon 6, nylon 6,6, polypropylene, PET and calcium carbonate are available through the company’s proprietary carpet recycling process

Circular Polymers by Ascend, a market-leading recycler of post-consumer carpet, today the launch of Cerene™, a line of recycled polymers and materials made from the company’s proprietary carpet reclaiming technology. Cerene is available as polyamide 6 and 66, PET, polypropylene and calcium carbonate as a consistent,
sustainable feedstock for many applications, including molding and compounding.
Recycling experts from Circular Polymers will be showcasing Cerene at Compounding World Expo on June 14-15 at the Messe Essen in Germany.

Ascend Performance Materials, a fully integrated producer of durable high-performance materials and the majority owner of Circular Polymers by Ascend, is known for its innovations in nylon 6,6. Cerene will continue that legacy with offerings in nylon 6,6 while also bringing to market recycled polymers such as nylon 6, PET and PP.

“Customers around the globe are seeking consistent and reliable post-consumer recycled materials,” said Maria Field, business director of Circular Polymers by Ascend. “Cerene is mechanically recycled using a process that minimizes our carbon footprint and environmental impact.”

Circular Polymers by Ascend converts post-consumer carpet into fiber and pellets. The company uses a proprietary process in its California-based facilities to achieve high efficiency in recycling, successfully providing a new life for virtually every component of the carpet and backing. The company has redirected 85 million pounds of carpet from landfills into new goods since 2018.

adidas and Bogey Boys are introducing the adidas x Bogey Boys collection featuring crisp designs and high-quality performance materials that combine vintage styles from golf and tennis with a modern feel, all for easy on- and off-course wear. The limited-edition capsule featuring apparel and footwear for men and women will be available at select locations beginning Wednesday, June 14.

The adidas x Bogey Boys capsule introduces classic, clean, and sporty designs that give golfers the chance to express their style.  In refined white, altered blue and collegiate green colorways, pieces from the collection include:

• Two four-button placket polos with a higher collar stand
• A striped silhouette as well as a solid pique option with piping at cuffs and chest pocket
• Terry cloth track suit (jacket and pants) with white 3-Stripes detailing and adidas x Bogey Boys branding
• V-neck sweater vest in collegiate green with checkered white and green contrasting across the shoulders and small contrast lines running through rib hem and armholes
• Straight-leg trouser made with adidas’ WARPKNIT material featuring pintuck detail down front and back legs along with piping around pockets for a crisp finish
• Terry cloth romper with zip-front pockets, elastic waistband with pin buckle, back-right welt pocket and contrast white binding at armhole and leg opening
• High-waisted skirt that features a side-zip opening, front and back seams with kick pleats, triangle pocket inserts with piping detail, and zipper pocket back-center and adidas’ WARPKNIT material
• Playful graphic tee that includes a 'Welcome to the Clubhouse' message on the back featuring characters dressed in pieces of the collection sketched by Macklemore and the adidas team.

There will be a handful of accessories to complement the range including a five-panel rope hat, leather golf glove, and leather travel bag featuring croc texture with metal feet and hardware.