From the Sector

US Vice President Kamala Harris announced significant multimillion-dollar investments by Parkdale Mills and six other companies today, as part of the Administration’s Call to Action to the private sector to promote economic opportunity in the region, as her office works to address the root causes of migration.

Vice President Harris, who is overseeing diplomatic efforts with El Salvador, Guatemala, Honduras, and Mexico, announced several private sector commitments to strengthen economic opportunities in the Northern Triangle and made remarks at a White House roundtable, which included Anderson Warlick, Chairman and CEO of Parkdale Mills. The textile and apparel co-production chain is one of the most essential supply chains for employment and economic development in both the United States and the Northern Triangle region, currently supporting over 1 million jobs in the United States and the Central American region. The Dominican Republic-Central America Free Trade Agreement (CAFTA-DR) and its strong rules of origin are the primary reasons this co-production chain exists, which is seeing significant growth this year.

North Carolina-headquartered Parkdale Mills, one of the largest manufacturers of spun yarn and cotton consumer products in the world, will make a multimillion-dollar investment in a new yarn spinning facility in Honduras and make an additional substantial investment to support existing operations in Hillsville, Virginia. This investment will help customers shift 1 million pounds of yarn per week away from supply chains in Asia and China and enhance U.S. and CAFTA-DR co-production resilience and increase regional product offerings. Parkdale’s announced investment will create hundreds of jobs in Honduras and further support hundreds of employees in Parkdale’s Hillsville operations.  

Recently, administration officials from the U.S. Trade Representative’s office and the Vice President’s office met with the U.S. textile industry to reaffirm the importance of rules of origin in nearshoring production chains, helping address labor and environmental challenges and mitigating supply chain risk.

“I would like to sincerely thank Vice President Harris for making this announcement and leading the effort with private industry to create more economic opportunities in northern Central America and the United States,” said Anderson Warlick, Chairman and CEO of Parkdale Mills. “Parkdale’s investments will support good paying jobs in the United States and in the Central American region and significantly increase our extensive product offering and capacity, including the production of sustainable specialty yarns.

Parkdale sees an enormous opportunity for brands and retailers to re-shore and nearshore production supply chains and double the size of U.S.-CAFTA-DR trade, because of the rules of origin in our trade agreement and a shift in sourcing by brands and retailers mitigating their supply chain sourcing risks.  We are excited about what this opportunity means for jobs in the U.S. and the region for this critical production chain and couldn’t be more thrilled to be part of this effort.  We look forward to working with the Vice President and her team on strengthening the textile and apparel production chains in the U.S. and region.”

National Council of Textile Organizations (NCTO) President and CEO Kim Glas, said, “This is an exciting and important announcement by Parkdale and Vice President Harris. Our industry has invested billions of dollars in the U.S. and in the region as a result of the investment-based rules of origin in the CAFTA-DR agreement, which ensures the job benefits of the agreement are reserved for the parties to the agreement.  Additional substantial announcements on further investment in textile and apparel production are expected soon.

As brands and retailers are seeking more environmentally sustainable, vertically integrated, transparent, and quick turnaround supply chains, our collective industries stand ready to work with companies that are seeking to mitigate sourcing strategies as Asian supply chains have faced enormous production constraints.  Further verticalization in the industry, like Parkdale’s announcement today, allows broader product diversification and grows jobs across the textile and apparel production chain.

We are thrilled with today’s announcement because it is a win-win for American and Central American workers and our environment and a huge opportunity to further recalibrate supply chains out of China and Asia. This valuable co-production chain between the U.S. and the CAFTA-DR region accounts for $12 billion in two-way trade and billions of dollars of investment. Significant growth is occurring in our sector and is expected to continue as supply chains continue to recalibrate.  We are delighted about this today’s announcement and appreciate the Administration’s strong support.”

Maruti Printing transformed its business as the first printer in India to adopt the latest LED-UV curing technology from AMS Spectral UV, a Baldwin Technology Company. The hybrid system, which includes traditional UV modules, has been in production for nearly two years and has significantly expanded the offset printer’s capabilities for its customers, including adding the ability to print on all types of plastic substrates.

Not only does Maruti have the distinction of being an LED-UV trailblazer in India, but it also is first in the market to upgrade a high-speed, high-performance Heidelberg Speed Master 72F+L six-color printer with coating tower—which prints up to 15,000 sheets per hour—with AMS Spectral UV’s high-power AMS XP9-I Series LED-UV and P3 Smart UV curing modules.

Established in 1986 and headquartered in Ahmedabad, Gujarat, Maruti serves customers throughout India, providing offset printing of scratch cards, banners, booklets, brochures, calendars, danglers, pamphlets, posters, stickers and envelopes.

In January 2020, Maruti took delivery of two AMS XP9-I Series LED-UV modules to cure colors in the interdecks. The modules are ideal for the highest-speed curing situations that require consistent peak intensity to the substrate, which is the case for Maruti’s offset printing standard of perfection with every cure.

To cure ink, as well as a growing variety of LED coatings, Baldwin’s AMS Spectral UV modules can be located after print units, or in the press delivery after the coater. When inks and coatings are cured with LED-UV, they become instantly dry via photopolymerization, allowing for printing on any substrate, including plastics and metallized stocks. Plus, work can be immediately finished and sent to the bindery once it comes off the press, without the need for heat, spray powder or drying time.

In addition, Maruti took delivery of two P3 Smart UV curing modules for installation at the end of the press to cure any type of UV coating and expand the company’s scope of coating compatibility to general UV coatings in order to offer its customers the widest range of UV printed choices in the Indian market.

The P3 Smart UV housings are completely liquid-cooled to ensure safe, consistent performance and increased uptime, and modules feature a universal design, so that any unit can fit any print unit location. P3 modules can be changed, inspected and cleaned quickly and easily, without tools, and lamps slide and lock into place smoothly and securely.

The durability of the equipment and its chipset was a critical deciding factor in India’s climate. The latest-generation power-and-control cabinets are dust- and moisture-resistant, allowing them to withstand extreme heat and humidity, as well as powder and airborne contaminants, making the equipment ideal for operation in stressful conditions anywhere in the world. AMS Spectral UV’s latest generation of LED chips, designed for the highest-intensity curing applications, enable the curing of LED inks and coatings at record-setting speeds. They are built with resilient components, and the semi-conductor components are sealed, which allows the chips to work in a variety of rugged environments. Additionally, integrated circuits incorporated into the design electronically protect the LEDs and the entire system.

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Michael Costello, Stahl Group ESG Director: “Only by focusing on reducing Scope 3 emissions can we accurately align our de-fossilization strategy with the global goal of limiting global average temperature increase to 1.5°C, as agreed at the 2015 Paris Climate Agreement and the COP26 in Glasgow. We look forward to working with partners across our industry and value chain to make this happen.”

Picanol has introduced its latest generation of airjet and rapier weaving machines, which have been called the “Connect” generation. These new generation weaving machines focus on connectivity and an increased level of data availability. With this new generation, Picanol is launching several new functionalities such as a digitalized Gripper stroke setting, Gripper tape monitoring, Climate control, Shed angle measurement, and fully integrated Power monitoring.

“Following the successful launch of our digital platform PicConnect earlier this month, we have now released a new generation of weaving machines, which are known as the Connect generation. Our Connect generation weaving machines can provide the correct data and are loaded with new and never-before-seen functionalities. This is clear proof that for Picanol “Driven by Data” is not just a slogan but a commitment. Not only have these innovations allowed us to make big improvements when it comes to our four design principles – Smart Performance, Sustainability Inside, Intuitive Control, and, of course, Driven by Data – but when combined with our new digital platform they will allow you to amplify your own intuition.” comments Johan Verstraete, Vice President Weaving Machines.

From now on, the range of Picanol weaving machines will have the “Connect” suffix. For the airjet weaving machines, this means: OmniPlus-i Connect and TerryPlus-i Connect, while for the rapier weaving machines, this means: OptiMax-i Connect and TerryMax-i Connect. These new machines are built around Picanol’s four main design principles:

Smart Performance
On the OptiMax-i Connect, Picanol has introduced a lubrication monitoring sensor in combination with a temperature sensor. The combined data they provide allow the user to make sure the gripper tapes are in optimal condition for maximum performance. As an option, a gripper stroke measurement sensor is also available. This not only dramatically simplifies the setting of the gripper stroke, but also enables the user to realize higher machine speeds when weaving reduced widths – a pure extra output combined with more user-friendliness.

Sustainability Inside
Even though it was 25 years ago that the Sumo Drive concept was launched, it remains the most powerful, versatile and energy friendly machine drive available. And it has been even further optimized. It features an optimized sheet metal package for lower energy consumption, optimized oil cooling circuit for a better performance and a built-in temperature monitoring. Moreover, the Connect machines can be equipped with a Power monitoring module, which allows the user to keep track of the power consumption of each machine over time. Every Connect machine also has a built-in ambient temperature and humidity sensor, which will help to optimize the climate control in the weaving shed at the lowest cost. And as raw material is the biggest cost factor, each machine can also be equipped with raw material use monitoring.

Driven by Data
As the machine has more sensors than ever before, it also generates more data. To enable a fast reaction to all these sensor data, the BlueBox control unit has been further optimized: better heat management guarantees short reaction cycles combined with the long lifetime of components. To have a good view of all of the data generated, a special sensor dashboard screen is available in the BlueTouch display: with a simple touch of the screen, the current and historical power consumption, temperature, humidity, material consumption, and – on the OmniPlus-i Connect – also the air consumption, can be monitored. The BlueTouch display is now also equipped with an Action center, an electronic logbook where all actions such as maintenance interventions can be logged or scheduled beforehand. The machine manual is now available on the BlueTouch display, and with the context-based help function the help pages related to the operation the user wants to perform appear with one touch of his/her fingertip. The built-in web browser even allows the user even to consult, for example, tutorial videos on the web to guide them through a setting procedure.

Intuitive Control
The Connect generation was designed to focus on what really matters: weave the highest possible grade A fabrics at minimal costs. A large set of tools have been installed to facilitate this goal. One of the most remarkable ones is the Harness frame stroke measurement – until recently, it was only available on the revolutionary SmartShed, but it is now also available on the cambox and dobby machines. Combined with the shed visualization and simulation, it offers a quantum leap in terms of optimizing the user’s shed settings without losing any time or taking any risks. The colors of the programmable Smart signal lights with stop timing functionality are now repeated around the push buttons, allowing even better visibility and the prioritization of interventions by the weaver. A full-fledged Access control system not only limits the access to certain pages and settings depending on the user, but also allows a tailored dashboard to be established for each user profile.

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30^th, October 1^st and October 7^th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, through its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will participate in the A+A 2021 International Trade Fair for Safety, Security and Health at Work in Düsseldorf, Germany.

Having achieved recognition as an innovation leader in the flat knitting industry through pioneering inventions such as the world’s first DSCS® Digital Stitch Control System and seam-free WHoLEGARMEnT® knitting, SHIMA SEIKI has entered the field of technical textiles by proposing knitting as an alternative to other manufacturing methods. Through breakthroughs in original hardware and software technology as well as research in new materials, what was impossible to knit in the past can now not only be knit; it can be made to perform even better.

On display will be the company’s SVR123SP computerized flat knitting machine featuring a dedicated loop presser bed that permits full use of inlay technique for the production of hybrid fabrics that feature both knit and weave characteristics, suited to the production of safety-oriented functional fabrics. SVR123SP furthermore features i-Plating inverse-plating capability for increased patterning capability, including the production of jacquard-like patterns in light-weight plain jersey stitch. A variety of knit samples produced on SVR123SP will be presented at A+A featuring anti-bacterial, fireproof and cut-resistant fabrics, including a light-weight cut-resistant apron as an alternative proposal to current heavy vinyl aprons used in the meat packing industry. Safety glove samples knitted on SHIMA SEIKI’s glove knitting  Machine will be presented as well.

Also demonstrated will be SHIMA SEIKI’s SDS-onE APEX4 3D design system. APEX4’s capability for virtual sampling is especially effective in streamlining the production process. Ultra-realistic simulation capability allows the use of virtual samples for evaluating design variations without producing actual samples for each variation. Smart, speedy and sustainable production is possible by minimizing the time, cost and resources normally required with sample-making.

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Presto MAX is compatible with natural fabrics, synthetics, and blends, and includes advanced algorithms for smart autonomous calibration, to deliver high-quality results with short cycle times and minimal manual interruptions or defects. The system was devised for compatibility with the KornitX global fulfillment ecosystem to enable anywhere, anytime production, supporting a true distributed production model that fulfills nearer the end consumer, eliminating time and logistical waste from the experience while empowering brands to ensure quality and consistency across all systems and production sites.

Kornit Presto MAX provides the cornerstone of a smart, efficient, sustainable EcoFactory that empowers producers to cover and integrate more parts of the process, from design to finished product, to decrease their carbon footprint, use minimum manpower, and generate less waste. This means eliminating excessive time, labor, and shipping throughout the value chain, enabling proximity production to meet the accelerated demands of a web-driven global marketplace—revealing new sales channels and clever business models to grow the business long-term.

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

The use of a single ECO Booster unit has been calculated to save up to 35% in energy costs, based on fixation processes. Fully automatic operation, set at the Monforts Qualitex control unit, ensures there is no additional burden on the machine operator.

The line is powered by Exxotherm indirect heating, which practically eliminates the yellowing which can be experienced during the treatment of certain polyamide and elastane-based fabrics, and is also equipped with a Conticlean circulating air filter system for constant high drying capacity.

Software
The latest Qualitex visualisation software offers operators reliability and easy control with its full HD multi-touch monitor and slider function, dashboard function with individual adaptation to operating states and faster access to comprehensive recipe data management.

With the Monformatic control system, the exact maintenance of the dwell time in combined treatment processes (drying and heat-setting) can be monitored. When the heat-setting point is reached, the fan speed is automatically adjusted, keeping energy consumption fully under control.

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

For wide-format flexo corrugated box printing, Baldwin’s AMS Spectral UV has engineered CorruCure™, a new generation of LEDUV technology that offers more than a 60% reduction in power consumption in an ultra-compact UV lamp head. This revolutionary solid-state curing system, designed specifically for corrugated LED printing, emits almost no heat or ozone, and accommodates width-switching. It also enables the curing of high-value decorative solutions, such as full-gloss, spot and matte coating effects on a variety of corrugated substrates, making it the ideal addition for product enhancement.

Lastly, Baldwin’s FlexoDry2™ infrared dryer, developed for corrugated flexo printing presses, utilizes patented Diamond IR lamps capable of reducing energy consumption by up to 30%, when compared to traditional IR dryers with aluminum or gold reflectors. Dramatically improved drying enhances color definition, and reduces or eliminates marking, while allowing full-speed printing. The system offers an optional integrated hot-air knife with temperature control to provide better surface drying. Taking safety into consideration, the FlexoDry2 comes with an integrated safety light curtain as standard and an optional camera vision system.

• Composites in the construction industry - The lightweight construction material of the future

Building with fibre-reinforced materials opens up completely new possibilities. In terms of engineering, design, and organisation. This is due, on the one hand, to the excellent properties of fibre-reinforced materials (FRM) and, on the other hand, to the fact that the material – unlike wood or brick, for example – is not machined or processed for its use, but custom-produced.

Excellent properties – in terms of engineering, design, and organisation
Fibre-composite materials offer a whole range of technical properties for innovative and sustainable building:
•    High mechanical rigidity
•    Low weight
•    High corrosion resistance
•    Low material fatigue
•    Low heat transfer coefficient of the plastic matrix
•    Resistance to frost and de-icing salt
•    Good draping capability

In addition, fibre composites offer numerous design options for novel and exceptional new building and maintenance projects:
•    Unique variety of shapes
•    Different structures of the textiles
•    Large spectrum of colours and colour combinations
•    Translucency of the plastic matrix
Thanks to these properties, composites can be used to produce coloured, phosphorescent, thermochromic or – through the use of LEDs or light-conducting fibres permanently integrated into the matrix – luminescent components.

In addition, there are organisational benefits for planning, construction and maintenance work with fibre-reinforced materials:
•    Easier handling and assembly of the far lighter and more flexible components – compared with steel, concrete or wood
•    Faster installation
•    Shorter construction site times in road and bridge maintenance
•    Shorter delivery times
•    Ability to integrate electronic monitoring systems

Individual composite textiles – for every lightweight engineering project
The composites experts at vombaur develop and manufacture woven tapes and seamless round or shaped woven textiles from carbon, glass, flax or other high-performance fibres on special weaving lines for individually specified round and shaped woven textiles – and can therefore offer you the best possible fibre base for every lightweight construction project.

"Regardless of whether it's a new construction or a renovation project, a façade design, a bridge or a staircase – as your development partner for composite textiles, we have plenty of experience with composites for demanding tasks," emphasises Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "We develop, create samples and manufacture woven tapes and seamless round or shaped woven textiles – in collaboration with the customer enterprise development teams and individually for the respective projects." This is how novel and unique lightweight components made of high-performance textiles are created for visionary projects.