From the Sector

With 42 exhibiting member companies, ITMA ASIA + CITME 2024 is once again marked by a strong presence of VDMA companies. They cover nearly all different machinery chapters with a focus on spinning and man-made fibers, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material.
In total, the German participation at the fair is the largest from outside China.

The VDMA team in Shanghai is staffed again with colleagues from the VDMA headquarters in Germany as well as from VDMA China. With these joined forces, the team is well prepared to support the exhibiting member companies on site.

Dr. Harald Weber, Managing Director VDMA Textile Machinery Association, summarised: “Although facing a difficult market situation, this year’s ITMA ASIA is an essential showcase for the member companies of the VDMA Textile Machinery Association. There is definitely no shortage of chances and opportunities in China and other Asian markets. The exhibiting members will demonstrate their smart technologies that can pave the way to a green textile production and are looking forward to welcoming numerous visitors from various countries to their booths in Shanghai.”

China is aiming at a green and low CO₂ development of its textile industry. At a press conference on the first day of ITMA ASIA + CITME, Georg Stausberg, member of the board of VDMA Textile Machinery and CEO of the Oerlikon Polymer Processing Solutions Division said: “Topics, such as energy efficiency and the careful use of resources have become increasingly important for Asian customers in recent years, not least due to stricter legal framework conditions. VDMA members and their technologies are the right partners on the road to a greener and low CO₂ textile production.”
 
Export performance
Already in 2023, the global textile machinery exports decreased by 18.6 % compared to 2022. This was a challenge all major textile machinery producing countries had to face. However, the German exports remained relatively strong and only declined by 3.4 % in 2023. 2024 did not see a change in the global textile industry and thus the German exports have now also dropped significantly. Between January and July 2024, German exports of textile machinery and accessories summed up to 1.2 billion € (2023: 1.6 billion €). The shipping to almost all major markets decreased between January and July: China: 242 million € (2023: 384 million €), Turkey: 140 million € (2023: 180 million €), USA: 118 million € (2023: 152 million €), India: 100 million € (2023: 153 million €).

Sales opportunities in Asia
An economic survey of VDMA in September, to which 20 textile machinery companies replied, reflects the global challenging situation. Around 36 % assessed their current business situation as satisfactory, 54 % said it was bad. Only very few companies expect the global situation to improve in the next six months.

However, looking at the sales opportunities by regions/countries in Asia, most of the responding companies expect a better business situation in the Asian markets except China in six months. The business situation is expected to be on a satisfactory level then. With regard to this, a presence at ITMA ASIA in Shanghai and next year in Singapore is important for VDMA members to continuously show their innovations and to keep contact with the customers in Asia.

The Oerlikon Polymer Processing Solutions Division of the Swiss Oerlikon Group is expanding its customer services and spare parts business in the area of machines and systems for the production of carpet yarns (BCF) and industrial yarns (IDY). To this end, the company concluded an agreement with the Truetzschler Group, based in Moenchengladbach, Germany, in August. Technology experts and service staff from Oerlikon Neumag are now the new contacts for customer services and the spare parts business for Truetzschler's BCF and IDY technologies installed in the market. The Moenchengladbach-based textile machinery manufacturer is withdrawing from this business segment in order to concentrate on the spinning, card clothing and nonwovens businesses in future.

Oerlikon Polymer Processing Solutions offers complete solutions for the manmade fiber industry. They range from extrusion and polycondensation plants to texturized yarn, and are accompanied by automation and digital solutions. The supply of all process steps from a single source ensures a harmonized technology that guarantees high quality of the yarns produced.

Based in Neumuenster, Germany, Oerlikon Neumag, a branch of Oerlikon Textile GmbH & Co. KG and a brand of the Oerlikon Polymer Processing Solutions Division, has been an established and broadly positioned international supplier with proven expertise in the field of BCF for decades. The division's sister company Oerlikon Barmag from Remscheid, Germany, contributes its expertise in the field of IDY systems.

The German Pavilion is confirmed to return from 19 – 21 September at the Shanghai New International Expo Centre. For the first time since borders reopened, industry leaders gathering under the banner will bolster the fair’s innovation and sustainability with a comprehensive showcase, from raw materials to machinery, complemented by diversified fringe events across the fairground.

Located in a prime area of the International Hall, the German Pavilion is set to draw crowds with its reputable products and technology. Assembling under the pavilion this year will be some new and returning German exhibitors, having made their names in the sub-categories of automotive nonwovens, industrial-use monofilaments, weaving machinery, and many more. After confirming their participation, Hansa Industrie-Mixer, J.H. Ziegler Nonwovens and New Materials, Lindauer Dornier, Monosuisse, and Perlon will showcase their expertise together with other highlighted exhibitors, including:

• Autefa Solutions – A full-service provider for turnkey nonwoven lines and machines, the company offers machines for fibre opening and blending, carding, crosslapping, needle punching, spunlace, thermobonding, amongst others. At the fair, the company will showcase technology spanning 10 application areas.
• Emtec Electronic – The company develops specialised test devices for the nonwoven and textile industries. An innovation said to quantify handfeel, its TSA Tactile Sensation Analyzer objectively measures the softness, smoothness and stiffness of textiles and nonwovens, as well as their recovery and elongation.
• Neuenhauser Group – The Neuenhauser Textile division provides fully-automated cleaning systems, transport automation solutions, winding technology, high-performance can coilers and weaving machine accessories. With decades of experience, the Group will debut at the fair with various innovative Agrotech, Buildtech, and Geotech solutions.
• Reifenhauser Enka Tecnica – A specialised provider of spinnerets and precision components to the man-made fibre industry. The company manufactures a broad spectrum of spinnerets and spin packs for all spinning processes, as well as premium jet strips for hydro-entangling with extra-long service life.
• Reifenhauser Reicofil – A well-known provider of spunbond, meltblown and composite lines for nonwoven applications in the hygiene, medical, filtration and industrial sectors. Offering a wide range of machinery at the show, the company is developing technical solutions for sophisticated and sustainable applications, with a strong focus on machine intelligence and energy efficiency.

New fringe events to further advocate innovation and sustainability
At this year’s fair, AiDLab^[1] will present its AI-based Textile Inspection System (AiTIS). A world first, AiTIS automatically and accurately detects material defects in nonwovens (especially for mask making), and various textiles, reflecting the collaborative efforts of AiDLab and a Hong Kong healthcare brand. At the event, Professor Calvin Wong, CEO & Centre Director of AiDLab, will introduce the system. This will be followed by a panel discussion and Q&A session with independent consultant Mr Eric Sham and moderated by AiDLab’s Mr Barry Tai, including insights on how advanced technology is reshaping the textile industry landscape.

Going beyond innovation, the fringe programme will also for the first time include Econogy Talks^[2] and sustainability tours to reflect Messe Frankfurt’s commitment to a sustainable future. Fairgoers can also visit the Innovation Showcase Area for outstanding industry achievements, with the focus this year on cutting-edge technology, green development and high-end applications. Product submission is now open. Contact us to submit your products, or register here for your visitor badge.

The fair’s product categories cover 12 application areas, which span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Cinte Techtextil China will be held from 19 – 21 September 2024.

^[1] The Laboratory for Artificial Intelligence in Design, jointly established by The Hong Kong Polytechnic University and the UK’s Royal College of Art, under HKSAR government funding
^[2] ‘Texpertise Econogy’ – the umbrella for Messe Frankfurt’s sustainability activities at its more than 50 textile trade shows worldwide

Dilo Temafa, a specialist in machinery and equipment for fibre preparation and natural fibre processing, announces the sale of a line extension to Eco-Technilin. The machines will complement an existing flax fibre preparation plant in France to enable higher fibre quality.

Eco-Technilin, a producer of sustainable materials, has chosen the machines to expand its production capacity and increase its efficiency. The plant expansion is specifically designed to efficiently clean flax scutcher tow and meet the high demands of modern manufacturing, while increasing process stability and plant availability.

Dilo Temafa has been active in the field of natural fibre extraction for more than thirty years and has supplied numerous systems for the processing of bast fibres, e.g. flax and industrial hemp. The fibres obtained are used in various industries, including the construction, automotive, nonwovens and textile industries, and make a contribution to minimising the ecological footprint.

International technology group ANDRITZ has successfully started up a new nonwovens production line supplied to Teknomelt Teknik Mensucat San. ve Tic. A.S. in Kahramanmaras, Türkiye. The new neXline wetlace CCP (carded-carded-pulp) line produces nonwoven roll goods for biodegradable, plastic-free wet wipes

By combining the benefits of two technologies, spunlace and wetlaid, the line enables the use of bio-based fibers, like viscose and wood pulp, to produce a high-performance and sustainable wipe with the same technical product characteristics and performances as a conventional wipe made of synthetic fibers while protecting the environment.

Teknomelt is one of the leading manufacturers of nonwoven meltblown, spunbond, SMS and SMMS fabrics in Türkiye. The company serves a wide range of markets, exporting 45% of its production. With the new ANDRITZ Wetlace CCP line, the company is expanding its range of sustainable nonwovens production for wipes. 

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Spinning recycled cotton
The use of mechanically recycled fibres in spinning brings specific quality considerations: they have higher levels of short fibres and neps – and may often be colored, particularly if post-consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness. The Uster Statistics 2023 edition features an extended range of fibre data, supporting sustainability goals, including benchmarks for blends of virgin and recycled cotton.
In general, short fibres such as those in recycled material can easily be handled by rotor spinning machines. For ring spinning, the shorter the fibres, the more difficult it is to guide them through the drafting zone to integrate them into the yarn body. Still, for wider yarn counts and higher yarn quality, the focus is now shifting to ring spinning. The presence of short fibres is a challenge, but Rieter offers solutions to address this issue.

Knitting recycled wool
For recycling, wool fibres undergo mechanical procedures such as shredding, cutting, and re-spinning, influencing the quality and characteristics of the resulting yarn. These operations remove the natural scales and variations in fibre length of the wool, causing a decrease in the overall strength and durability of the recycled yarn. This makes the yarn more prone to breakage, especially under the tension exerted during knitting.

Adapting to process recycled materials often requires adjustments to existing machinery. Knitting machines must be equipped with positive yarn suppliers to control fibre tension. Steiger engages in continuous testing of new yarns on the market, to check their suitability for processing on knitting machines. For satisfactory quality, the challenges intensify, with natural yarns requiring careful consideration and adaptation in the knitting processes.

From fibres to nonwovens
Nonwovens technology was born partly from the idea of recycling to reduce manufacturing costs and to process textile waste and previously unusable materials into fabric structures. Nonwovens production lines, where fibre webs are bonded mechanically, thermally or chemically, can easily process almost all mechanically and chemically recycled fibres.

Autefa Solutions offers nonwovens lines from a single source, enabling products such as liners, wipes, wadding and insulation to be produced in a true closed loop. Fibres are often used up to four times for one product.

Recycling: total strategy
Great services, technology and machines from members of Swiss Textile Machinery support the efforts of the circular economy to process recycled fibres. The machines incorporate the know-how of several decades, with the innovative power and quality standards in production and materials.
Stäubli’s global ESG (environmental, social & governance) strategy defines KPIs in the context of energy consumption, machine longevity and the recycling capacity in production units worldwide, as well in terms of machinery recyclability. The machine recyclability of automatic drawing in machines, weaving systems and jacquard machines ranges from 96 to 99%.

ITMA ASIA + CITME, Asia’s leading trade fair for textile machinery, took place in Shanghai with a considerable presence of VDMA member companies. The round about 40 exhibiting VDMA members covered nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing. They were part of a strong German presence with a total of around 60 German exhibitors – including non-machine manufacturers.

During a press conference on the first day of the show, Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association and managing director of August Herzog Maschinenfabrik expressed: “After years of cancelled or postponed trade fairs and travel restrictions, this year’s ITMA ASIA + CITME is the first edition of the show that can be attended not just by Chinese but by visitors from various countries and regions. The event is a good opportunity to meet customers and partners again in person and not just on a screen. ITMA ASIA + CITME provides a good chance to deepen the already good relations with China and other Asian countries further and to set-up new partnerships.”

Dr. Horn continued to present latest facts and figures about the German textile machinery industry. Between January and August 2023, the overall exports of textile machinery and accessories summed up to 1.7 billion euros, which was a slight decrease compared to the same period in 2022. The shipping to almost all major markets decreased between January and August: China: 440 million € (2022: 453 million €), Turkey: 205 million € (2022: 265 million €), USA: 177 million € (2022: 144 million €), India: 170 million € (2022: 228 million €).

Numerous VDMA member companies have production sites in the major Asian markets China and India and serve their customers in these countries from there. A latest VDMA business climate survey among the textile machinery companies in China showed, that 75% of all participants assessed their current business situation as either good (6%) or satisfactory (69%). For the coming quarter, 50% of the companies see the market to decline. Asked about the business situation during the next six months, 44% of the companies expect the market to remain stable, 56% expect the situation to become worse. This is also reflected in the HR of the companies: 63% expect the number of employees to remain unchanged.

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

Since February 2023, Manjushree Spntek has been producing high-performance spunmelts on an RF Smart Composite line from Reifenhäuser Reicofil - benefiting both from many years of experience in the packaging industry and from experience with Reifenhäuser's blown film lines. "We know a lot about plastic extrusion, for example when it comes to line operating parameters such as temperature and pressure. Processing is similar in both industries," explains Rajat Kedia. "The main difference is the distribution of the products: In plastic packaging, we had an established customer base and sold a lot of material to the big consumer goods manufacturers. The nonwovens market in India, on the other hand, is still forming, with thousands of small companies currently getting involved." These serve customers in their regions, such as hospitals.

The RF Smart Composite line is a standardized spunmelt line for smaller and emerging markets. The line produces nonwovens of the highest Reicofil quality with appropriately adapted throughput. This makes it ideally suited for applications in hygiene and medical technology and, with typically 8,200 annual production hours, it is extremely reliable. In addition, operators can start production quickly because in many cases the line can be integrated into existing buildings.

Before production could start, Manjushree built a new production building in Bidadi, a town an hour's drive from Bangalore International Airport. The building is designed to be sustainable: It uses natural light and fresh air, has comprehensive contamination control, and obtains almost all of its energy from renewable sources. Reifenhäuser Reicofil then installed, commissioned and tested the RF Smart Composite line.

Since February 2023, Manjushree Spntek has been producing high-quality spunmelted nonwovens, including ultra-soft fabrics and fabrics with special coatings for customers in the hygiene and medical industries. The material can be used, for example, for baby diapers and feminine hygiene products, but also for medical articles ranging from surgical gowns to surgical drapes.

A delegation of Italian textile machinery companies will attend the 2023 edition of TITAS TAIPEI, which will be held in Taipei, Taiwan, from October 17 to 19, 2023. Taiwan is judged as a very promising market for the Italian textile machinery industry, especially in the innovative sectors of technical textiles and nonwovens.

In 2022, Italian exports to the Asian country exceeded the value of 17 million euros, and in the period January-June 2023, the value has already reached 7 million euros. The attention for the Taiwanese market has led ACIMIT, the Association of Italian Textile Machinery Manufacturers, and Italian Trade Agency to set up a pavilion at the upcoming edition of TITAS TAIPEI.

Six Italian textile machinery manufacturers, all ACIMIT member companies, will exhibit in the pavilion: Ferraro, Danitech, Lgl, Ms Italy, Reggiani, Unitech.

At the upcoming TITAS TAIPEI, therefore, visitors will be introduced to Italian technology, once again a key player in the textile production process.

ANDRITZ has received an order from Lotus Teknik Tekstil A.Ş., Türkiye, to install a Metris All-In-One digitalization platform for its new WetlaceTM CP nonwovens production line from ANDRITZ. The integration will be finalized in September 2023.

Lotus Teknik Tekstil A.Ş. is a leading nonwoven roll good producer and a member of the Sapro group, one of the top three producers of wet wipes globally.

The Metris All-in-One platform developed by ANDRITZ provides full support for industrial plants throughout their entire life cycle. It combines a complete range of functionalities for professional production management, simulation and optimization using the latest artificial intelligence methods, plus cyber security, and condition monitoring with smart sensors in an integrated approach.

It will support Lotus Teknik Tekstil in further optimizing the operating efficiency of its ANDRITZ Wetlace CP line by

• ensuring a stable production process via data collection and process monitoring,
• reducing operational costs through optimized production traceability and energy monitoring,
• improving final product quality thanks to a stable process, and
• reducing production waste by optimizing raw material management.