From the Sector

All proposals submitted by the Board of Directors were approved at the Annual General Meeting of Autoneum Holding Ltd. In view of the net loss in the 2019 financial year, a dis-tinct majority of shareholders agreed to the proposal to forgo a dividend payment.

In consideration of COVID-19 Ordinance 2 of the Federal Council, no shareholders were admitted to physically attend the Annual General Meeting on site. The Company therefore requested the shareholders in advance to transfer their votes to the independent voting proxy. He represented 59.8% of the total 4 672 363 shares issued.

The shareholders approved the 2019 Annual Report including the consolidated and annual finan-cial statements. Given the significant net loss in the 2019 financial year shareholders approved the proposal submitted by the Board of Directors to forgo a dividend. Hans-Peter Schwald, Chairman of the Board of Directors, stressed: “Autoneum aims to distribute at least 30% of net profit attributable to Autoneum shareholders as dividends. Unfortunately, Autoneum did not generate a profit in 2019, mainly due to impairments. This development is unacceptable for both, the Group Executive Board and the Board of Directors, and together with the employees we are doing every-thing possible to get back on the road to success. Nevertheless, the Board of Directors and the Group Management will continue to adhere to their long-standing dividend policy and thus ensure that shareholders participate appropriately in the Company's success.”

Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider, Peter Spuhler and Ferdinand Stutz, were confirmed in office. This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were also re-elected to the Compensation Committee. In addition, a large majority of the shareholders of Autoneum Holding Ltd gave formal discharge to all members of the Board of Directors and the Group Executive Board.

The consultative vote on the 2019 remuneration report was approved by 89.2%. The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2021 financial year as well as the other proposals were also approved by a large majority.

Beverly Knits Inc. is proud to be involved in the effort led by Hanes and Parkdale to help support the fight against COVID-19. Working with a coalition of textile companies, we are ramping up production in the USA to provide face masks for health care workers on the frontlines. With the combined efforts of many small and medium-size companies, we are retooling our production lines to begin manufacturing immediately.

Beverly Knits is coordinating the production of up to 1.5 million masks produced domestically per week. Ron Sytz, CEO of Beverly Knits, said “It is an honor to be working with great American companies, united to supply critical resources to healthcare workers and first responders”.

Companies on the Beverly Knits team

• Clover Knits
• Contempora Knits
• Carolina Cotton Works
• Southfork Finishing
• National Safety Apparel
• A Lava & Sons
• Wells Hosiery
• Jomel Industries
• LA Corp
• Greenwood Mills

Anglo Recycling Technology is on course to deliver no less than a million of its special nonwoven mats for hydroponically growing herbs to a major customer in the Middle East this year. The Growfelt-branded products arose from the discovery back in the late 1990s by Anglo Recycling’s owner Simon Macaulay, that the Sussex-based retail supplier of salads, Van Heineken Brothers (now Vitacress), used nonwoven felts on which to grow its cress.

“I drove down to see the company’s production manager, Chris Moncrieff and discovered they were indeed growing cress on felts, but they were made from virgin materials and he liked the idea of maybe using a blend of virgin fiber offcuts of cotton, wool, and polypropylene,” he explains. “That’s how Growfelt was born. For the first six years, we supplied exclusively to Vitacress and in return, they helped us to bring our factory up to food-grade standard and to set in place a testing regime for Salmonella E-Coli coliforms and listeria.”

In recent years, however, Anglo Recycling, which is based in Whitworth, near Rochdale in the UK, has significantly broadened its customer base. It now offers a core of three growing media products to meet the differing needs of customers across Europe, the Middle East, and the Far East, whether for retail presentation and appearance or for water holding.

HeiQ, winner of the Swiss Technology Award and Swiss Environmental Award, launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment that is tested effective against coronavirus.

Since its inception 15 years ago, HeiQ has forged a solid innovation track record helping brands improve textile products. Catalyzed to action by the global fight against Coronavirus, HeiQ launches HeiQ Viroblock NPJ03, an antiviral and antimicrobial textile treatment which is proven effective against human coronavirus (229E) in face mask testing, significantly enhancing the antiviral log reduction from 2.90 of untreated face masks to 4.48, over 99.99% reduction of virus infectivity. (Remarks: a log reduction of 2 is equivalent to 100 times the effectiveness).

Chinese protective masks producer Suzhou Bolisi is the lead adopter of HeiQ Viroblock NPJ03. Treated masks will be available on the market as early as this April. American legwear manufacturer Kayser-Roth is planning to add the technology to their new product, Ghluv hands protector, while Lufeng from China is evaluating the technology on other types of fabric used for garments.

HeiQ Viroblock NPJ03 is a unique combination of vesicle and silver technologies designed to inhibit the growth and persistence of bacteria and viruses. The HeiQ vesicle technology targets lipid- enveloped viruses, such as coronavirus, providing rapid virus deactivation, while the HeiQ silver technology inhibits the replication of both bacteria and viruses. HeiQ Viroblock NPJ03 can be applied to a wide spectrum of textile surfaces including face masks, air filters, medical gowns, curtains, drapes and more. HeiQ also has a range of highly wash-durable antimicrobial and odor control textile technologies, called HeiQ Pure, combining silver-based and bio-based materials for all fabric types.

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Stemming from the mill’s holistic vision, R-TWOTM represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its environmental performance. With the goal to create fabrics that can provide both quality and responsibility, ISKO has developed this platform, which deals with the most critical issue that apparel supply chains are currently faced with: using more than what actually needed.

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

• Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
• Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
• Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
• Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
• Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
• Free cash flow significantly improved
• Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
• SGL Carbon confirms guidance for fiscal year 2020: sales expected slightly below previous year; recurring EBIT approximately 10 to 15 percent below previous year level
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: “The financial development of the fiscal year 2019 conceals the fact that our strategic orientation is correct. This is evident from our growth and the increasing number of contracts and projects we acquired in our strategic core markets. Main drivers are the topics of sustainable mobility and energy as well as digitization. Therefore, we expect that we can grow our consolidated revenue by a mid to high single-digit percentage per year on average between 2020 and 2024.“

The fiscal year 2019 developed very differently in the two business units of SGL Carbon. The record results in the graphite specialities business could not fully compensate for the weak development in the market segments Wind Energy, Textile Fibers and Industrial Applications in the carbon fiber business. Group sales grew by 4 percent to 1.1 billion euros. Recurring Group EBIT declined by 25 percent to 48 million euros. Due to the ongoing weakness in the market segments Textile Fibers and Industrial Applications the business unit CFM recorded a non-cash impairment loss of 75 million euros in the third quarter of 2019. With minus 90 (prior year: plus 41) million euros, consolidated Group result declined significantly compared to last year’s good results. The Group confirms its guidance for 2020 published in October 2019.

Group sales are expected to decline slightly compared to the prior-year level, whereas Group recurring EBIT is expected to reach a result around 10 to 15 percent below the prior-year level. Consolidated net result of the Group in 2020 should strongly improve compared to prior-year level to a low double-digit loss.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued the following statement today in response to the Congressional-Executive Commission on China’s staff report on the forced labor of Uyghurs and other minorities in China to produce consumer products for global companies.

We share the concerns of the bipartisan China commission regarding forced labor in China that is used to produce goods for global companies. We agree with the findings and the commission’s recommendations to the administration and Congress to take action against the systemic abuse of forced labor.

As the commission’s report details, Chinese apparel exporters have clearly profited from the virtual enslavement of this minority population, and we call for continued scrutiny and the end to this exploitation of a repressed people. The commission has served a fair warning to U.S. businesses and consumers to not be complicit in these forced labor practices.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

• U.S. employment in the textile supply chain was 594,147 in 2018. 
• The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018. 
• U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018. 
• Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available

Net result impacted by operating losses and high impairments in North America

In 2019, Autoneum grew organically by 2.5% and has thereby significantly outperformed the declining market. In Swiss francs, revenue rose slightly to CHF 2 297.4 million. However, as previously communicated, operational inefficiencies in North America and impairments on fixed assets in that region had a particularly strong impact on profitability and led to a net loss of CHF –77.7 million. The Board of Directors therefore proposes that no dividend bedistributed for the 2019 financial year. Based on the new turnaround program launched in North America at the beginning of this year, significant profitability increases are expected for 2020.

2019 was an extremely challenging year for the automobile industry. The continuing weakness of the global economy, ongoing trade disputes and the increasing regulation of mobility impacted vehicle demand negatively. But 2019 was also a year of change for Autoneum internally. An in-depth analysis carried out by the new Group Management in the fall showed a need to reevaluate the Group’s performance over the short- to medium-term. In Business Group North America, the operational and commercial problems have proven more extensive than originally assumed. As a result, the turnaround program launched in spring 2019 was replaced at the beginning of 2020 with a dedicated and far more comprehensive program for the North American sites.

Revenue growth despite a shrinking global market
As a result of weak demand, the number of light vehicles produced worldwide fell again sharply in 2019 compared to the previous year; whereby the decline of almost –6% was much steeper than in 2018. Thanks to numerous production ramp-ups and a favorable model portfolio, Autoneum generated organic revenue growth1 of 2.5%, despite the global market cooling. Revenue consolidated in Swiss francs rose by 0.7% from CHF 2 281.5 million to CHF 2 297.4 million.

Profitability2 impacted by operational inefficiencies and impairments
Operational inefficiencies in North America and impairments on fixed assets in this region were the main reason for the – first-ever – negative net result in 2019. In addition, the sharp drop in automobile production in Europe and China as well as associated lower utilization of production capacities in the affected Business Groups also burdened the Group’s profitability. EBITDA excluding IFRS 16 effects decreased to CHF 126.0 million (2018: CHF 197.2 million), which corresponds to an EBITDA margin of 5.5% (2018: 8.6%). One-time charges from impairments in the amount of CHF –68.0 million had a negative impact on EBIT, reducing it to CHF –32.9 million (2018: CHF 114.1 million). Without these one-time charges, EBIT amounted to CHF 35.0 million. The EBIT margin 1 Change in revenue in local currencies, adjusted for hyperinflation. 2 The figures for the 2019 financial year include IFRS 16 effects. Autoneum Management Ltd . Media Release . March 4, 2020 Page 2/5 excluding impairments was at 1.5% in 2019, and taking those into account the margin decreased to –1.4% (2018: 5.0%).

Beaulieu Fibres International prioritizes collaborative product development & sustainable long-term partnerships

• Up & running: pilot line & new fibre line in Italy, BICO capacity for industrial fibres in Belgium
• Introducing new Meraspring for soft cushioned hygiene nonwovens
• Extended fibre range for filtration applications
• Stand 1340, INDEX™20, 31^st March – 3^rd April, Palexpo, Geneva

Beaulieu Fibres International, the leading European polyolefin and BICO fibre supplier, will announce at INDEX™20 completion of its pilot line in Terni, Italy, the start-up of the state-of-the-art multifunctional production line in Terni, and the new BICO line in Belgium. The company invites the Nonwoven sectors to join efforts in accelerating the development of innovative and sustainable solutions for a rapidly changing global market (Stand 1340).

New products are also on their way to show. For nonwoven converters serving the hygiene segment, Beaulieu Fibres International will unveil Meraspring to the European market at INDEX™20. The BICO-fibres are made with polyethylene (PE) in the sheath and polyethylene terephthalate (PET) in the core, and are the latest addition to the hygiene portfolio.

Hexcel’s Leading Position in Aerospace and Automotive Makes Hexcel a Trusted Partner for Urban Air Mobility

At this year’s JEC World in Paris on March 3-5, Hexcel will highlight the growing need for innovations in composite materials to support the emerging Urban Air Mobility (UAM) market.

Urban air mobility – urban transportation systems that move people by air or enable cargo deliveries – is the next big transportation innovation. Similar to taxis or ride sharing today, UAM will help remove congestion from our streets and provide a convenient, rapid method for travel in urban centers as well as in remote areas.

Advanced composite materials will be at the heart of UAM vehicles by providing lightweight, efficient, reliable, and cost-competitive options for manufacturing. “Materials have been a key driver of efficiency for aircraft today, and they will be even more important for the emerging UAM marketplace,” said Imad Atallah, Director of Strategic Marketing for Aerospace and Urban Air Mobility at Hexcel.

Already, Hexcel is a leader in advanced composite materials for the aerospace market and is a key supplier of composite materials to the automotive industry. So, the company is well positioned to offer solutions to meet the critical needs of high-rate and quick-part manufacturing cycles, in addition to low-cost needs for this space. Hexcel’s materials solutions approach for UAM is to make it greener and more sustainable, safer, more comfortable, and more affordable.

Hexcel’s broad range of carbon fiber and HexPly® prepreg solutions, including snap cure thermosets and thermoplastics, coupled with the most qualified positions on aerospace programs in the industry make the company a trusted partner for UAM. In addition to offering composite materials from carbon fibers, prepregs, honeycomb and reinforcements, Hexcel’s best-performing market solution in noise absorption on aircraft jet engines, Acousti-Cap®, provides a strong position of innovation to solve one of the most critical problems in the UAM space – community noise. “We are applying our technologies to the unique needs of urban air mobility vehicles,” Atallah said.

Hexcel’s ability to bring materials technology from the aerospace and automotive industries represents a unique strength in solving the critical challenges of UAM, especially around high-rate manufacturing, low-cost materials, light weighting, and noise. “Both thermoplastics and quick-cure thermoset materials are expected to have applications on UAM vehicles,” Atallah said. Furthermore, Hexcel’s broad product portfolio including unsized carbon fiber has proven to be the most compatible with thermoplastic resins from a consolidation perspective.