From the Sector

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Autoneum Pure is based on a comprehensive set of criteria assessing the sustainability performance of a product in all four phases of its life cycle: material procurement, production, use and end of life. For example, components with a high content of recyclable materials or those that achieve significant weight savings compared to comparable standard components qualify for the “Autoneum Pure.” label. Autoneum already offers various multifunctional technologies that meet the high standards for Autoneum Pure products: Ultra-Silent for underbody systems or battery undercovers, Di-Light for carpet systems, Prime-Light and IFP-R2 for inner dashes and floor insulators as well as Hybrid-Acoustics PET for e-motor encapsulations and engine-mounted parts, which was launched in fall 2019.

With Mono-Liner, the latest innovation for wheelhouse outer liners is also included in the Autoneum Pure portfolio. Among other things, the Mono-Liner-based components convince thanks to their lightweight construction, thereby contributing to lower vehicle weight with correspondingly less fuel consumption and emissions. The excellent life cycle assessment is also based on their particularly resource-saving manufacturing: Production cut offs of the components, which consist to a large extent of recycled PET fibers, can be processed into pellets and completely returned to the manufacturing process as fibers. An SUV and a crossover model from a US vehicle manufacturer already benefit from Mono-Liner wheelhouse outer liners.

Anahid Rickmann, Head of Corporate Communications & Responsibility, explains: “With Autoneum Pure we are the first automotive supplier to establish a sustainability label in the field of acoustic and thermal management. Autoneum Pure is part of the Company's Advance Sustainability  Strategy 2025 and sets industry standards in product communication.”

Mr Atte Virtanen has been appointed Head of Business Development at the Fortum Bio2X bioeconomy programme as of 1 May 2020. Atte will play a key role in establishing Bio2X partnerships, helping partners to advance more sustainable businesses, as well as developing industrial biorefinery operations together with the programme team.

Before joining Fortum, Atte was working 10 years in the Netherlands for Trespa International B.V and in Italy for Arpa Industriale S.p.A. In both companies, he was leading R&D activities in the areas of cellulose materials and thermosetting resins. In addition, Atte gained experience from production environment during his time at Stora Enso’s Kotka mills, where he worked several years both in paper production and in a paper impregnating plant.

Over the years, Fortum Bio2X has built a team with a focus on research and development, including piloting different production technologies. The programme is now moving on to the next phase by developing competencies in operations and maintenance. As part of this phase, Atte will help to shift the attention to commercializing the biomass fractions.

The Bio2X programme is part of Fortum’s strategy to build options for significant new businesses that improve resource efficiency and provide smart solutions. It aims to be the straw refiner with superior material efficiency and a leading supplier of responsible textile fibres. Bio2X focuses on an efficient use of the cellulose, hemicellulose and lignin fractions in order to replace fossil or otherwise detrimental raw materials in numerous end-use applications.

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

Beaulieu International Group (B.I.G.)’s Tessutica business is proud to announce a new product line in upholstery. Greencare fabrics are created from pellets that come from marine plastic waste. The fabrics themselves can then be 100% recycled into pellets again.

The new Greencare collection is made with 100% recycled and recyclable upholstery fabrics and is certified with the the Global Recycle Standard (GRS) label. The company used recycled yarns from regular post-consumer PET bottles from the oceans, landfills and upcycled cotton from garments.
For this, Tessutica partnered with the Seaqual project, which brings plastic waste back into the manufacturing chain. Through the recycling process there is no usage of new petroleum which decresases the CO₂  emissions significantly compared to the use of virgin polyester.

With growing demands for sustainability within the business world as well as from end-consumers, Tessutica felt it was the right choice to offer a product line that comes with a full guarantee of environmental consciousness.

All proposals submitted by the Board of Directors were approved at the Annual General Meeting of Autoneum Holding Ltd. In view of the net loss in the 2019 financial year, a dis-tinct majority of shareholders agreed to the proposal to forgo a dividend payment.

In consideration of COVID-19 Ordinance 2 of the Federal Council, no shareholders were admitted to physically attend the Annual General Meeting on site. The Company therefore requested the shareholders in advance to transfer their votes to the independent voting proxy. He represented 59.8% of the total 4 672 363 shares issued.

The shareholders approved the 2019 Annual Report including the consolidated and annual finan-cial statements. Given the significant net loss in the 2019 financial year shareholders approved the proposal submitted by the Board of Directors to forgo a dividend. Hans-Peter Schwald, Chairman of the Board of Directors, stressed: “Autoneum aims to distribute at least 30% of net profit attributable to Autoneum shareholders as dividends. Unfortunately, Autoneum did not generate a profit in 2019, mainly due to impairments. This development is unacceptable for both, the Group Executive Board and the Board of Directors, and together with the employees we are doing every-thing possible to get back on the road to success. Nevertheless, the Board of Directors and the Group Management will continue to adhere to their long-standing dividend policy and thus ensure that shareholders participate appropriately in the Company's success.”

Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider, Peter Spuhler and Ferdinand Stutz, were confirmed in office. This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were also re-elected to the Compensation Committee. In addition, a large majority of the shareholders of Autoneum Holding Ltd gave formal discharge to all members of the Board of Directors and the Group Executive Board.

The consultative vote on the 2019 remuneration report was approved by 89.2%. The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2021 financial year as well as the other proposals were also approved by a large majority.

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

As one of the world’s first companies, Polygenta has, since 2014, been producing 100% recycled POY and DTY from post-consumer PET using the patented chemical recycling process developed by perPETual Global Technologies. perPETual’s process reduces CO2 impact by more than 66% compared to virgin PET. The yarn is spun using Oerlikon Barmag systems and equipment. As a result, Polygenta is able to produce a wide range of DTY and FDY yarns that comply with the Global Recycled Standard (GRS).

Beaulieu Fibres International prioritizes collaborative product development & sustainable long-term partnerships

• Up & running: pilot line & new fibre line in Italy, BICO capacity for industrial fibres in Belgium
• Introducing new Meraspring for soft cushioned hygiene nonwovens
• Extended fibre range for filtration applications
• Stand 1340, INDEX™20, 31^st March – 3^rd April, Palexpo, Geneva

Beaulieu Fibres International, the leading European polyolefin and BICO fibre supplier, will announce at INDEX™20 completion of its pilot line in Terni, Italy, the start-up of the state-of-the-art multifunctional production line in Terni, and the new BICO line in Belgium. The company invites the Nonwoven sectors to join efforts in accelerating the development of innovative and sustainable solutions for a rapidly changing global market (Stand 1340).

New products are also on their way to show. For nonwoven converters serving the hygiene segment, Beaulieu Fibres International will unveil Meraspring to the European market at INDEX™20. The BICO-fibres are made with polyethylene (PE) in the sheath and polyethylene terephthalate (PET) in the core, and are the latest addition to the hygiene portfolio.

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Stephan Sielaff is a chemical engineer who gained experience in the chemical industry in the years 1993 to 2014, holding various management positions for Unilever and Symrise. Since 2014, he has worked for the Swiss specialty chemicals company Archroma, an important supplier of the textile and paper industry, as a Member of the Board of Directors and Chief Operating Officer (COO).He has been responsible for forming the integrated operational structure and the strategic development of the company.

Christian Skilich, who will assume management responsibility for the new Pulp and Wood Raw Materials Division in the Lenzing Group, boasts outstanding expertise in the field of paper and pulp technology. With a Master of Science in Paper Technology and Engineering & Economics, he first held various positions in the paper, packaging and glass industries. Since 2004, he has worked in a broad range of management areas on behalf of the internationally operating Mondi Group. Christian Skilich most recently served as Chief Operating Officer on Mondi’s Board of Directors, overseeing projects in the USA and Europe.