From the Sector

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

The sustainable wear2wear concept is synonymous with high-quality, responsible clothing. In European operations, textile fibres from used garments are used to produce new functional fabrics. Depending upon the area of intended use, they also meet strict waterproofing, breathability, protection and comfort requirements. To ensure that the raw material cycle comes full circle, these textiles can be recycled again when they reach the end of their service life. As a result, there is no waste, and they go on to produce new garments. As the wear-2-wear partner companies guarantee that – from the quality of the raw materials to the guaranteed recycling end process – these are 100 percent recyclable, functional fabrics made of recycled textile fibres. Water- and dirt-repelling technologies based on renewable raw materials, along with the most advanced membrane technology, will ensure that the textiles are manufactured and impregnated entirely without the use of PFC in the future too.

Five partner companies  
The five European partner companies in the wear2wear cooperation cover the entire recycling loop. Heinrich Glaeser Nachfolger GmbH is a German fibre and yarn producer and the “recycler” in the loop. Märkischen Faser GmbH (D) is the “upcycler” and fibre manufacturer. Carl Weiske GmbH & Co. KG (D) develops the polymers, fibres, yarns, chemical additives and textile systems, and TWD Fibres GmbH (D), a fully-integrated filament yarn producer, covers the entire range of polyester and polyamide 6.6 continuous filament yarns. Schoeller Textil AG, the innovative Swiss company, is responsible for textile production and manufactures sustainable high-tech fabrics with maximum clothing comfort. The matching climate-neutral and similarly 100 percent recyclable PTFE and PFC-free membrane, as well as recycled outer materials and linings, are supplied by Sympatex Technologies (D), the ecological alternative among the textile function specialists. DutchSpirit is a Dutch company which has been dedicated to environment-friendly clothing since 2010. Its mission is to significantly increase the awareness for sustainable clothing and offer recyclable clothing in the workwear segment. DutchSpirit is the initiator for the development of the Inspire products from Schoeller Textil and provided the inspiration for the wear2wear concept. Further garment-making partners who now also belong to the cooperative group include: Anchor Workwear BV (NL), Hüsler Berufskleider AG (CH), Groenendijk Bedrijfskleding BV (NL), Bedrijfskledingdiscounter BV (NL) and Rifka'S (NL).

Albstadt-based circular knitting machine manufacturer Mayer & Cie. (MCT) is exhibiting at this year’s leading textile and garment technology trade fair ITMA with the slogan “Stay a winner. With Mayer & Cie.” The focus of the company’s presentation will be on sport. Sportswear, active leisurewear and sports shoes are increasingly made of circular knitted fabrics and the long-established German firm has the right machines to cater for this trend. Mayer & Cie. is also going for the improved customer experiences that consistent digitization makes possible.

For years global demand for circular knitted goods has increased continuously. An important growth driver is the sportswear and sports fashion sector, including sports shoes. According to Euromonitor the market segment grew by about seven per cent per year between 2013 and 2017. By 2017 Euromonitor estimated its total market value to be around USD 78 billion. Lightweight synthetic fibres, new patterns and attractive functionalities are the key requirements in this area.

Mayer & Cie. can already fulfil many requirements with a portfolio of machines considered to be the largest in the industry. Lightweight mesh structures, often requested for running shirts, are a speciality of the IG 3.2 QCe interlock machine, for example. Jacquard machines from the OVJA family, in contrast, are suitable for the manufacture of shoe uppers. Compared with the conventional methods flat knitting and warp knitting, circular knitting scores points for productivity and significantly shorter set-up times.

Series production of the Spinit 3.0 E spinning and knitting machine has been under way since the end of 2018. It combines two previously separate processes – spinning and knitting – in one machine. That saves time, space and energy compared with conventional manufacturing processes. Mayer & Cie. has already won several awards for this approach, the latest being the Innovation Prize for the Climate and the Environment (IKU) that the Federal Environment Ministry and the Confederation of German Industry (BDI) award every other year. The company is presenting at ITMA its further developments of this machine.

Along with machine development Mayer & Cie. has set itself another target for ITMA and thereafter: to improve the customer experience, a task of which Sebastian Mayer is in charge. His responsibilities at Mayer & Cie. are for corporate development and digitization. Digitization of the company’s extensive customer and machinery know-how is currently under way. Customers will be able to see and test the initial results at ITMA. Available for testing will be the new Web shop, linked with an analogue model of the high-bay warehouse in Albstadt-Tailfingen, and machine maintenance by means of HoloLens.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

TINTEX Textiles presents new exemplary concepts based on a continuous textile research for responsible, ethical-minded fashions. It is born out of heritage and passion to use only good materials and the finest finishing techniques for better textiles in the best spirit of its unique Portuguese culture.

The new S/S 2020 collection starts from the concept of “UNO”: a full Naturally Advanced offer that is gathered together under one emblematic cultural standard, one that refers to unity as a result of the revolutionary generation in a society that embraces uniqueness and differentiation. UNO stands for unification, cross-fertilization, inclusion, just like an orchestra playing in concert with the same purpose. It is the perfect chance to discover a range of unique developments that truly embody the company’s identity, balancing responsible innovation and creativity. Smart ingredients take the lead being enhanced by the TINTEX unique dyeing and finishing expertise.

Starting from the “UNO is…embrace yourself” concept, a unique range of natural fibres are blended with technical qualities for new levels of wellbeing performance. Shirt structures, timeless jerseys and interlocks are born from the transformed polyamide Q-NOVA® by Fulgar with excellent moisture control, and from SeaCell™, that embodies the unique properties of seaweed combined with the unique ROICA™ CF (Clean Fit), a unique odor neutralizing premium stretch yarn by Asahi Kasei.

At the booth, let's have a look at TINTEX exceptional, Naturally Clean® finishing process launched last September 2018. Naturally Clean® enhances the natural beauty of cotton and cellulosic fibres, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean® achieves this by using Novozymes technology, a company that is a world leader in biological solutions. Second, using textile chemicals Beyond Surface Technologies AG which have the lowest possible environmental impact, without compromising performance. Naturally Clean® maintains the original characteristics over an extended period of time. All materials are Oeko-Tex and can also be Bluesign® certified, which will evidence the future elimination of harmful substances.

Between the first and key adopters of TINTEX brandnew Naturally Clean finishing, shines Filippa K, a leading Nordic fashion brand with a modern, smart approach to the responsible development of their lines. Emblematic pieces for the SS 2019 main collection are the Linen Wrap Dress, the M Linen Long Sleeve Tee and the M Linen R-neck short sleeve Tee made with a TINTEX heavy stretch linen, made with ROICA Colour Perfect™ family of dyeable premium stretch yarn, enriched by the unique Naturally Clean finishing.

• conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

To receive an award at PERFORMANCE DAYS is the ultimate industry recognition. In selecting the winners of the (ECO) PERFORMANCE AWARDS, the jury handles with total integrity with no outside influence and is absolutely free in making its decisions. This season there are so many outstanding innovations at the exhibition that two awards are announced!

WATER – OUR RESPONSIBILITY, the current FOCUS TOPIC for the next trade fair on November 28-29th, seems to have spurred the PERFORMANCE DAYS exhibitors to peak performances. The trade fair has highlighted innovations every season for the past ten years, but seldom have there been so many outstanding new developments. So many in fact, that two awards are to be presented: the ECO PERFORMANCE AWARD for best sustainable development, and the PERFORMANCE AWARD for a new functional highlight.  

And the winner of the ECO PERFORMANCE AWARD is:
The jury is highly enthusiastic about the nomination of the ECO PERFORMANCE AWARD winner and described the award-winning fabric as the best ecological solution currently available on the market. This extraordinary laminate from Jou Jou Fish combines various sustainable technologies. Article "JYRNP0002 307" consists of 100% recycled nylon and is designed with a micro-porous membrane (functional performance 15K/10K) that is produced without solvents. This saves a lot of water, plus the fabric is made from pre-dyed fibres (solution-dyeing) and the DWR coating is applied using a dry-finish treatment. The only thing that could improve it: as the polyamide is currently produced from postindustrial waste products, it would be nice to have option of using post-consumer polyamides in the future.

And the winner of the PERFORMANCE AWARD is:
The PERFORMANCE AWARD recognizes another pioneering development. Never before has there been such a fine, yet still tear resistant, highly functional fabric. The winner is article "DPQ 1092 DWR" from Green Threads and with only 17g/m² an absolute lightweight. Particularly fine nylon yarns are used (7d and 4d); a 4d yarn has never before been used in functional fabrics. This plus the extremely good tear resistance clinched it for the jury. Another plus for the winner: this lightweight fabric can achieve with just 17 g comparable performance values to a 50g fabric; thereby, not only is the weight significantly reduced, but also the amount of raw materials and energy consumed in production. This is also a factor that protects the environment when the garment is disposed at the end of its useful life.

Following the success of Trevira GmbH’s joint booth concept at Heimtextil 2018, the company will be expanding its plans next year. At the 2019 Heimtextil, due to take place from 8-11 January in Frankfurt, Trevira be presenting a new joint booth. At over 2000 msq, the new booth in Hall 4.2 will be significantly larger, up from 1300 msq in 2018, and next year will also see an increase in the number of major customers joining Trevira at Heimtextil, from 16 this year to 22 in 2019.

Trevira has expanded its fair booth concept for 2019. Together with 22 of its biggest customers, the manufacturer of high-quality, flame retardant polyester fibres will tell the story of the entire textile value chain. Starting with the basics - fibre production and yarn manufacture – the exhibition will then move on to show the colouring, weaving and warp and weft knitting stages, eventually taking the visitor right up to the textile editing. Meanwhile, Trevira’s customers will reveal their Trevira CS collections for home and contract textiles at individual stands, demonstrating their contribution to the value chain. Visitors will catch a glimpse of the complex and complicated world of textiles manufacturing, while also gaining an insight into how polyester fibres are transformed into attractive, functional fabrics conveying true visual and sensory appeal along with authentic value.

Trevira GmbH’s CEO, Klaus Holz said: “The overwhelmingly positive market response to our joint booth at Heimtextil 2018 showed us that we are moving in the right direction, and we will continue to build on this concept in 2019, working together with an even larger group of Trevira CS customers to create a shared exhibition space displaying the entire textile value chain.”

Bobingen - Trevira GmbH, Germany, is again participating as an exhibitor at this year’s Building Healthcare show in Dubai, from 2-4 October. The manufacturer of high-value polyester fibres will present a large variety of fabrics made by 12 partners from inherently flame retardant Trevira fibres and yarns.

Modern furnishing concepts for healthcare environments are making increasing demands in terms of quality, functionality, colouring and hygiene. Perfectly matched materials and colour concepts in the interior not only help to provide good orientation for the residents, but also create more attractive spaces. In addition, the use of appropriate textiles such as curtains, drapes, blinds and sliding panels, fabric-covered dividing panels, upholstery and bedding textiles, can improve the room acoustics, protect your privacy and let the room appear in a pleasant light. In healthcare environments where hygiene and cleanliness are of particular importance, antimicrobial textiles may be used.

Trevira CS® and Trevira CS Bioactive® create a safe, attractive and comfortable environment in hospitals, clinics, spas, care homes and all other sectors in the contract sector.

Trevira CS Bioactive® contract textiles combine flame retardant and antimicrobial functions, which makes them the ideal material for use in healthcare facilities. They inhibit the growth of bacteria, prevent the formation of odours in/on the fibre and keep the textiles fresh for a longer time. The permanent flame retardant and bioactive properties of their fibres is integrated at molecular level, meaning that they remain unaffected by repeated washing, abrasion and ageing. This gives them an advantage over textiles with only a supplementary surface finish.

Trevira CS® and Trevira CS Bioactive® fabrics for the healthcare sector presented at the show stand come from these suppliers: Delius, Dina Vanelli, Fidivi Tessitura Vergnano, Gebrüder Munzert, JAB, Mattes & Ammann, Pugi, Rubelli, Rudolf Breuer Mechanische Weberei, Schmitz Textiles/drapilux, Subrenat, Verotex.

Trevira CS® and Trevira CS Bioactive® fabrics meet the requirements of the relevant international fire safety standards and can be certified according to the IMO regulations for the maritime sector. All Trevira fibres and yarns carry the Oekotex Standard 100 certificate. They are manufactured in accordance with the highest standards for sustainable products. A broad variety of collections with thousands of designs are available in Trevira CS® worldwide.

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

• FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
• Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
• Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
• Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

• Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
• SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
• Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
• Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
• Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
• Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
• Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.