From the Sector

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

The study "Technologies, Markets and Players" by E-Textiles 2018-2028 predicts a 2 billion dollar growth of the smart textile market. This growth can only be achieved by replacing the existing approaches, mostly manual production, with series production. With the Smart Textiles Micro Factory, the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be demonstrating for the first time on the Texprocess stand, stand number C02, in the transition from Halls 4.1 and 5.1 how a smart textile can be manufactured from design to finished product together with various partners by producing a smart cushion.

The product and the manufacturing process are the result of co-innovation. In the future, co-innovation for smart textiles is to be implemented via the GeniusTex platform. As part of the German Federal Ministry of Economic Affairs and Energy's major strategic project for the “Smart Service World”, ITA is working with partners from industry and research to develop the online platform for smart textile innovation.

At the booth, let's have a look at TINTEX exceptional, Naturally Clean® finishing process launched last September 2018. Naturally Clean® enhances the natural beauty of cotton and cellulosic fibres, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean® achieves this by using Novozymes technology, a company that is a world leader in biological solutions. Second, using textile chemicals Beyond Surface Technologies AG which have the lowest possible environmental impact, without compromising performance. Naturally Clean® maintains the original characteristics over an extended period of time. All materials are Oeko-Tex and can also be Bluesign® certified, which will evidence the future elimination of harmful substances.

Between the first and key adopters of TINTEX brandnew Naturally Clean finishing, shines Filippa K, a leading Nordic fashion brand with a modern, smart approach to the responsible development of their lines. Emblematic pieces for the SS 2019 main collection are the Linen Wrap Dress, the M Linen Long Sleeve Tee and the M Linen R-neck short sleeve Tee made with a TINTEX heavy stretch linen, made with ROICA Colour Perfect™ family of dyeable premium stretch yarn, enriched by the unique Naturally Clean finishing.

Since 1931, Bemberg™ is a new material definition for responsible luxury. The one for cool exquisite comfort, whose smart heritage is born in a circular economy.

Made by Asahi Kasei, the company is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel.

Starting from September 2018, Asahi Kasei has launched the Bemberg™ brand in Europe, with an openness and positive approach that facilitates a stronger, more focused role in the market while supporting our partner’s strengths too.

Enhancing core values through a more refined product and process in order to support our partner’s mission to materially benefit the whole supply chain with beautiful products and a straight communication. This is the key motivation behind the launch of the Bemberg™ global brand, taking the next steps on a journey that redefines the future of contemporary luxury with this unique fiber.

This is the reason why manufacture is playing a key role in the global role out of the latest Bemberg™ innovations. Pioneering partner mills for apparel textiles featured at the booth include: A-GIRLS, Alberto Bardazzi, DEBS, Ekoten, Euromaglia, Fiveol Textil, Infinity, Ipeker, Jackytex, Lanificio Europa, Matias & Araujo, Sidonios Knitwear, SMI Tessuti, T.B.M. Group, Tessitura Uboldi Luigi, Texteam and Tintex Textiles. Key lining developments are presented by Brunello, Gi Tessil Foderami, Gianni Crespi Foderami Manifattura Pezzetti and Tessitura Marco Pastorelli.

Color Solutions International, a member of the DyStar® Group, has issued their COLOR ANALYSIS report for Autumn/Winter 2020.

The trend and color experts at CSI are delighted to bring you the sixth issue of the Color Analysis report. New for this season, the experts at Color Solutions International have delved deeper by giving more detail for each color using their proprietary Relative Color Popularity process (RCP). RCP is a marriage of color validation with trend color forecasting. The RCP report has been organized into four categories to help validate your color selection.

In this issue, 54 ColorWall™ colors are featured along with additional color validation, color evolution, and direction by hue. "This season’s Color Analysis for Autumn/Winter 2020 found its inspiration in our heritage and reconnection of our roots. We look from the past to present day reality to shape the themes of trends reflected in the spirit of time we are living in. From a time gone by to this moment of now, themes take shape as they transform historic elements into modern day life, intertwining together to create a new existence full of creative energy and vitality.

Reminiscent of a time gone by, all that we consider heritage to be, has developed into a level of loyalty and trust over time. The quality in make and the care that goes into construction found in the ideas of heritage goods begin to resurface into a lifestyle of quality over quantity. In the present and future looking forward, we also continue to explore innovative lifestyle trends as we are becoming more conscious about the environment and the impact our choices have.

The international home textiles industry has enjoyed a promising start at Heimtextil in Frankfurt am Main, which finished Friday, 11 January. The challenging economic situation and uncertainty in the retail sector were countered by a positive and confident mood at the world’s leading trade fair.

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’. [*For comparison, 2018: 2,975 exhibitors from 64 countries; 68,584 visitors from 135 countries, FKM-tested)]

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’.

One topic that occupied both exhibitors and visitors was the current and future economic situation. A further challenge is the increasingly evident changes that are happening in trade. Increasing revenues and revenue shares in online retailing stand in the way of the efforts made by the stationary retail trade to maintain their inner-city businesses. ‘The small business specialist trade, but also department stores and multibrand stores, and thus the heart of our visitor target groups, are under pressure from the constantly increasing levels of e-commerce. With Heimtextil and our consumer goods fairs in general, we offer these retailers in particular clear perspectives and diverse inspiration in an ambiguous world’, continues Braun.

Heimtextil made it easier for its visitors to access valuable inspiration and business momentum thanks to an optimised trade fair concept and the associated new hall structure. ‘The new concept brought more visitors to the stand’, was the feedback from Andreas Klenk, Managing Director of Saum & Viebahn from Kulmbach in Franconia about hall 8.0 which offered textiles editeurs and manufacturers of curtain and sun protection systems a common platform for the first time. ‘It was the right decision to merge the different segments. We had high quality discussions with respect to both export and domestic business, and are satisfied with the trade fair’.

As part of the new concept, Heimtextil expanded its unique product range across the entire exhibition site and also included the new hall 12, which has been an additional architectural highlight on the Frankfurt exhibition grounds since September.

Top international companies from the Bed & Bath Fashion segment presented their wares here. For the company Curt Bauer from Aue in Saxony, the première of the new hall was a successful one. ‘We're very enthusiastic about the new hall 12. The product range there was very well received. We are very satisfied with the quality of visitors to our stand. In addition to a good frequency of German visitors, we are particularly pleased about growth from China and Russia’, says Managing Director Michael Bauer.

Natural materials, PET and ocean plastics 
Heimtextil set a standard in terms of sustainability: after the first global climate protection agreement for the textile industry was signed by 40 leading fashion companies, organisations and associations at the World Climate Conference in Katowice last December, the focus in Frankfurt was also on environmental progress in the textile industry. Numerous exhibitors presented progressive solutions, for example in the recycling of PET bottles and ocean plastic as well as in the use of certified natural materials. ‘Sustainability was the theme for us at this year’s Heimtextil. Major media players visited us and the 'Green Tour’ guided tour stopped by. We presented many things, including our first vegan duvet and fair silk products, all 100 per cent produced in Austria’, says Denise Hartmann, Marketing Manager at Hefel Textil. The topics of water consumption in the textile industry and microplastics also increasingly came to the fore. The exhibitor directory ‘Green Directory’ alone contained around 150 progressive companies listing sustainably produced textiles. The offer was supplemented by its own lecture series as well as theme-specific tours, which provided valuable impetus and
underpinned the pioneering green position of the trade fair.

Sleep becomes new lifestyle theme
Heimtextil also focused on sleep as one of the upcoming lifestyle trends. While a balanced diet and sufficient exercise are now a natural part of a healthy lifestyle, restorative sleep is still neglected* although it is one of the most important building blocks for long-term physical and mental well-being. At Heimtextil, a number of new products and aspects came to the fore that help people become sensitised to and analyse their sleep behaviour and promote healthy sleep. Around the redesigned hall 11.0 and in the adjoining lecture area ‘Sleep! The Future Forum’, representatives from the national and international bed industry enjoyed attractive product presentations and superb speeches on the topics of sustainability, hospitality, sport and digital.

In addition to the renowned trend show, the trade fair also focused on contract business, particularly in the hotel and hospitality sector, as well as decorative and upholstery fabrics, digital printing solutions and wallpapers.

The next Heimtextil in Frankfurt am Main – its 50th edition – will take place from 7 to 10 January 2020.

*According to a forsa investigation commissioned by the Techniker Krankenkasse

• conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

TRSA recently held its 105th Annual Conference & Exchange from Oct. 16-18 at The Meritage Resort & Spa in Napa, CA. Nearly 250 linen, uniform and facility services executives and guests gained insights from presentations on technology and family business, plus thought-provoking panel discussions and break-out sessions. They also participated in social events and in the recognition of industry leaders at the Annual Industry Awards Dinner.

Attendees raved about the program, which drew a net promoter score of 74 (anything above 50 is considered excellent). “TRSA's Annual Conference is an excellent opportunity to catch up with old friends, make new connections in the industry, celebrate those who have contributed to our industry and learn about new best practices,” said Jim Buik, president of the Roscoe Co., Chicago. Gerard van de Donk, managing director of ABS Laundry Business Solutions/LSI Inc., added that the conference offered attendees a prime opportunity for networking. “Every time it is valuable to meet and talk with the executives in our industry,” he said. “That is helping us to define our road map toward creating history together.”

The conference began with a keynote address by Vivek Wadhwa, a technology expert and columnist for The Washington Post and Bloomberg BusinessWeek. Wadhwa’s speech looked at technological innovations. Specifically, he examined how those advances are disrupting industries today and how they will continue to do going forward. From the outset, Wadhwa promised a stirring glimpse of what’s to come. “I’m going to take you on a tour of the future,” he said. “I’m going to tell you why this is the most amazing and scary time in human history.” He proceeded to do just that, elaborating on a range of topics from medical/genetic engineering breakthroughs to progress in robotics, water treatment, nanotechnology, energy and more. For example, he noted that the cost of solar energy is dropping exponentially. Within five years, he predicted that the costs for both solar technology and battery storage units will drop by 50% or more.

The presentation of the Bemberg™ new campaign represents a high benchmark in value for smart textile fiber innovations. Bemberg™ is the ONE new material definition for responsible luxury. The ONE for cool exquisite comfort, and the ONE whose smart heritage is born in a circular economy.
 
Made since 1931 by Asahi Kasei, which is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel. The new campaign will amplify this uniqueness and innate smartness, redefining the brand voice as Bemberg™ at an international level with an openness and positive approach that facilitates a stronger, more focused role in the market while supporting our partner’s strengths too. It is not just another brand name, but about enhancing core values through a now even better, more refined product and process that supports our partner’s mission to materially benefit the whole supply chain.