From the Sector

Reset
136 results
ISKO logo
ISKOs shared its R-TWO Platform
11.03.2020

ISKO shared R-TWO™ at Drapers Sustainable Fashion Forum

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.
As evidence of its Responsible Innovation™ approach, ISKO presented the R-TWO™ program, its latest
responsible achievement. Stemming from the mill’s holistic vision, R-TWO™ represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its  environmental performance.
The R-TWO™ reduces the amount of raw material sourced by using a blend of reused cotton and recycled polyester – both certified –, improving sourcing efficiency throughout the entire field-to-fabric production.
Reused cotton is certified with the Content Claim Standard – or CCS – from the Textile Exchange. As for recycled polyester, it can be either Recycled Claim Standard (RCS) or Global Recycled Standard (GRS) certified, depending on the content percentages. Together with this cutting-edge and fully responsible program, ISKO also uses automated laser
technology developed in partnership with Jeanologia.

“How technology can help make the fashion industry more sustainable”:
On March 11th, ISKO hosted a discussion about ways, to make the fashion industry more responsible
The panel was moderated by David Shah, consultant on design and marketing development, Publisher and CEO at Metropolitan Publishing BV and Associate Professor at ARTez (Arnhem, the Netherlands) and Associate Professor at Renmin University, (Beijing, China). The talk involved Keith O’Brien, ISKO Marketing & Business Development Manager, Victoria Soto, Jeanologia Custom Technology Consultant and Filippo Ricci, Fashion Open Studio Program & Partnership Manager.

 

Source:

Menabò Group, Global Press and PR Support

Rieter Holding Ltd.
Rieter Holding Ltd.
03.02.2020

Rieter signed additional contracts at the Swiss-Egyptian Investment Forum

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

  • Contracts for additional projects signed in Cairo
  • Order volume is around 30 million Swiss francs
  • Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

 

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

  • Contracts for additional projects signed in Cairo
  • Order volume is around 30 million Swiss francs
  • Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

 

Source:

Rieter Holding Ltd.

Asia Pacific Rayon  logo Asia Pacific Rayon
Asia Pacific Rayon Logo
24.01.2020

Asia Pacific Rayon Joins World Economic Forum’s Public Blockchain Platform

To Accelerate Public-Private Cooperation in Supply Chain Transparency

Asia Pacific Rayon (APR) has joined the first neutral and public traceability platform capable of visualising blockchain-based supply chain data from multiple companies and sources. It aims to help businesses across industries respond to consumer demands for ethical and environmentally friendly products.
The neutral and safe space for collaboration is provided by the World Economic Forum and created in collaboration with Everledger, Lenzing Group, TextileGenesis™, and the International Trade Centre. APR will contribute to Phase 2 of the initiative which seeks to incorporate more data sources.

“APR has started harnessing the potential of enterprise blockchain technology to enable customers to trace finished products back to the plantation forest origins on a smartphone app. To be able now to connect our data to other similar industry initiatives is a natural next step for APR, as is extending the benefits of our upstream traceability to the rest of the textile value chain.

Enhancing Follow Our Fibre with New Mill Sustainability Dashboard

To Accelerate Public-Private Cooperation in Supply Chain Transparency

Asia Pacific Rayon (APR) has joined the first neutral and public traceability platform capable of visualising blockchain-based supply chain data from multiple companies and sources. It aims to help businesses across industries respond to consumer demands for ethical and environmentally friendly products.
The neutral and safe space for collaboration is provided by the World Economic Forum and created in collaboration with Everledger, Lenzing Group, TextileGenesis™, and the International Trade Centre. APR will contribute to Phase 2 of the initiative which seeks to incorporate more data sources.

“APR has started harnessing the potential of enterprise blockchain technology to enable customers to trace finished products back to the plantation forest origins on a smartphone app. To be able now to connect our data to other similar industry initiatives is a natural next step for APR, as is extending the benefits of our upstream traceability to the rest of the textile value chain.

Enhancing Follow Our Fibre with New Mill Sustainability Dashboard

Launched in mid-2019, APR’s blockchain-based Follow Our Fibre allows customers and stakeholders to scan its viscose product with a user-friendly app to access data that traces the product’s journey from plant nursery to viscose manufacturing and on to seaports. In October 2019, APR announced a collaboration with TrusTrace to integrate Follow Our Fibre with the latter’s T-Trace module. This helps connect APR’s upstream data to downstream textile value chain actors such as yarn and fabric customers and fashion brands.

More recently, a sustainability dashboard tracking key mill environmental performance indicators has been added to Follow Our Fibre. The dashboard presents APR’s performance in its first year of operations where a baseline has been established for quarterly tracking, reporting and continuous improvement.
The performance indicators follow key industry standards being set by ZDHC for Man-Made Cellulosic Fibres (MMCF), as well as the European Union Best Available Technologies (EU BAT).

 

 

Source:

(c) Omnicom Public Relations Group

Sappi Europe
Sappi Europe
20.12.2019

Sappi joins Cepi in the 4evergreen alliance to boost the contribution of fibre-based packaging

Cepi, the European association representing the paper industry, has announced a new alliance called 4evergreen. The aim of the alliance is to boost the contribution of fibre-based packaging in a circular and sustainable economy that minimises climate and environmental impact. The alliance will increase awareness about the benefits of fibre-based packaging materials, advocate for EU legislation supporting product design for recyclability and call for the development of optimised collection systems and appropriate recycling infrastructures.

The rise of environmental awareness and consumer concerns, as well as the increase of packaging focused regulation, such as the Single Use Plastics Directive, have helped companies to accelerate the development of alternative packaging materials including fibre-based packaging with a view to helping consumers make more climate-friendly choices.

4evergreen was created as a forum to engage and connect industry members from across the fibre-based packaging value chain, from paper and board producers to packaging converters, brand-owners and retailers, technology and material suppliers, waste sorters and collectors.

Cepi, the European association representing the paper industry, has announced a new alliance called 4evergreen. The aim of the alliance is to boost the contribution of fibre-based packaging in a circular and sustainable economy that minimises climate and environmental impact. The alliance will increase awareness about the benefits of fibre-based packaging materials, advocate for EU legislation supporting product design for recyclability and call for the development of optimised collection systems and appropriate recycling infrastructures.

The rise of environmental awareness and consumer concerns, as well as the increase of packaging focused regulation, such as the Single Use Plastics Directive, have helped companies to accelerate the development of alternative packaging materials including fibre-based packaging with a view to helping consumers make more climate-friendly choices.

4evergreen was created as a forum to engage and connect industry members from across the fibre-based packaging value chain, from paper and board producers to packaging converters, brand-owners and retailers, technology and material suppliers, waste sorters and collectors.

“The 4evergreen alliance is important because it was born from an initiative of consumer product industry leaders who recognize the huge potential of fibre-based packaging in a circular economy” said Susanne Oste, VP Innovation and Sustainability at Sappi. “Their customers want sustainable packaging and fibre-based products provide the most climate-friendly solution available. Sappi is proud to play a part in this industry alliance. We have been investing heavily for more than 10 years in cutting edge research into real solutions for the problems that confront our customers. A recent success is the launch of the only fully recyclable confectionary wrapper on the market today.”

More information:
Sappi Europe
Source:

Sappi Europe

03.12.2019

EuroShop 2020: Unique Power Package for Retail

EuroShop, the World’s no.1 Retail Trade Fair, is a must-see fixture for the retail world. From 16 to 20 February it will bring together to the tune of 2,300 exhibitors from over 60 countries with 114,000 trade visitors expected from throughout the world in Düsseldorf. And it is not only an indispensable information platform, trend hotspot and network for retail professionals but it also intensely impacts many other areas and sectors, delivers innovative blue-prints and addresses urgent themes of relevance to the future such as digitalisation, robotics, sustainability or climate neutrality.

The Side Events at EuroShop 2020:
The USPs of EuroShop include not only the extensive ranges of its exhibitors from throughout the world but also the quality and cross-section of its unrivalled line-up of side events.

EuroShop, the World’s no.1 Retail Trade Fair, is a must-see fixture for the retail world. From 16 to 20 February it will bring together to the tune of 2,300 exhibitors from over 60 countries with 114,000 trade visitors expected from throughout the world in Düsseldorf. And it is not only an indispensable information platform, trend hotspot and network for retail professionals but it also intensely impacts many other areas and sectors, delivers innovative blue-prints and addresses urgent themes of relevance to the future such as digitalisation, robotics, sustainability or climate neutrality.

The Side Events at EuroShop 2020:
The USPs of EuroShop include not only the extensive ranges of its exhibitors from throughout the world but also the quality and cross-section of its unrivalled line-up of side events.

8 Stages – 600 Speakers – 500 Lectures
The centrepiece of EuroShop are a total of eight Stages. They are lecture and discussion forums with high-calibre speakers addressing the latest developments, innovative trends and best practices amidst the hustle and bustle of the trade fair and accessible for EuroShop visitors free of charge and without prior registration (simultaneously interpreted in German-English or in English only). Boasting a total of 600 speakers and well over 500 expert talks delivered over five trade fair days this accompanying programme offers each trade fair visitor invaluable and right-on-target value added. All Stages at a glance: Retail Technology Stage, Omnichannel Stage, Start-up Stage, Store Design Stage, Retail Designers Stage, Energy Management Stage, Retail Marketing Stage and Expo + Event Stage.

 

More information:
EuroShop 2020
Source:

Messe Düsseldorf GmbH

DOMOTEX asia/CHINAFLOOR expands its design influence (c) DOMOTEXasia
Domotex Asia Chinafloor
26.11.2019

DOMOTEX asia/CHINAFLOOR expands its design influence

DOMOTEX asia/CHINAFLOOR (March 24-26) – the leading trade show for carpets and floor coverings in the Asia Pacific region - expands the design and conference area and welcomes new and returning brands.

Shanghai - For the 22nd edition, each flooring sector will have a theme. The highlighted product category in wood is solid wood for ground heating systems. The category is taking over the entire hall showing new technologies, new designs and new products in floor heating. Solid wood for ground heating systems is growing in China – according to China National Forest Products Industry Association, around 80% of China's wood flooring brands have developed the product.

DOMOTEX asia/CHINAFLOOR (March 24-26) – the leading trade show for carpets and floor coverings in the Asia Pacific region - expands the design and conference area and welcomes new and returning brands.

Shanghai - For the 22nd edition, each flooring sector will have a theme. The highlighted product category in wood is solid wood for ground heating systems. The category is taking over the entire hall showing new technologies, new designs and new products in floor heating. Solid wood for ground heating systems is growing in China – according to China National Forest Products Industry Association, around 80% of China's wood flooring brands have developed the product.

At the same time the market share is increasing by more than 30% annually. It is expected that by 2025, the market size of solid wood for ground heating systems will reach RMB 10 billion (approx. 1.4 billion USD). The international and local market leaders, such as Junckers, Foglie d’Oro, Edelholz, IBF, Teclic, Nature, Fudeli, Bloor, Jinyi, Licher, Nuogao and Moganshan have already confirmed their participation at the show. Also in this hall we see the latest developments in the market in the dedicated InnovAction campaign.

The resilient flooring section will be spread out to 69,500 sqm gross, featuring Stone Plastic Composite (SPC) flooring. Among the resilient halls, there will be an “Inspiration Hall”, housing InnovAction campaign and design forum, where famous interior designers will educate the audience on using resilient flooring in interior. The InnovAction will be upgraded by showcasing the new products within matching interior spaces. This new way of presenting the InnovAction products is ideal for both manufacturers to share the ideas and for visitors to keep up to date with the market trends.

Carpet section will promote carpet as a driving force for interior design, with a dedicated hall being the epicenter of home and design carpets and the host hall for the Luxury Brands Carpet Show – a showcase of the most sought-after international high-end carpet design brands. After the successful first edition in 2019, Chinese Original Carpet Design Show comes back to promote the works of young Chinese carpet designers. Country pavilions from Germany, Belgium, Iran and Turkey will also showcase their products among the carpet halls. Traditionally DOMOTEX asia/CHINAFLOOR has been focused on B2B, however due to the market changes, the end users are more and more welcome to the show. In order to give the oriental carpets and rugs the spotlight and follow the trends, Indian and Afghanistan pavilions will be creating a new area - “Treasure of Orient”.

In 2020, DOMOTEX asia/CHINAFLOOR will cover more than 185,000 sqm of gross space, taking up 16 halls at the Shanghai New International Expo Center. Five of the exhibition halls will be dedicated to carpets and rugs, four to wood, bamboo and other hard floors, 2 to FLOORTECH asia and 5 halls to resilient floor coverings. In 2019, the show gathered 1,579 exhibitors from 36 countries and attracted 66,875 trade visitors, of which 15,092 international, coming from 107 nations.

18.11.2019

Hexcel to display 3D printed parts at Space Tech Expo

  • Hexcel  at Space Tech Expo, Bremen Hall 5 - Stand B20

STAMFORD, Conn. – Hexcel is exhibiting for the first time at the Space Tech Expo Europe show in Bremen, Germany on November 19-21 to promote its latest technologies and innovations for space applications. More than 3,000 visitors are expected at this major international forum that is dedicated to new and innovative solutions for space business and technology.

Hexcel is improving the way the world’s spacecraft components are manufactured and will feature a number of 3D-printed flight-ready carbon fiber parts manufactured from HexAM® additive manufacturing technology, combining Hexcel’s proprietary high performance PEKK thermoplastics with aerospace grade carbon fiber. HexPEKK® structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

Other Hexcel solutions for space applications that will be presented include carbon fiber, prepregs and honeycomb materials with proven performance for satellite structures and launchers.

  • Hexcel  at Space Tech Expo, Bremen Hall 5 - Stand B20

STAMFORD, Conn. – Hexcel is exhibiting for the first time at the Space Tech Expo Europe show in Bremen, Germany on November 19-21 to promote its latest technologies and innovations for space applications. More than 3,000 visitors are expected at this major international forum that is dedicated to new and innovative solutions for space business and technology.

Hexcel is improving the way the world’s spacecraft components are manufactured and will feature a number of 3D-printed flight-ready carbon fiber parts manufactured from HexAM® additive manufacturing technology, combining Hexcel’s proprietary high performance PEKK thermoplastics with aerospace grade carbon fiber. HexPEKK® structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

Other Hexcel solutions for space applications that will be presented include carbon fiber, prepregs and honeycomb materials with proven performance for satellite structures and launchers.

12.11.2019

DyStar Exhibits Innovations at Performance Days

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar’s Cadira Reactive is a resource saving module which was first launched in 2016. The Cadira concept supports in reduction of water, waste, and energy consumption. And as another sustainable solution offering the DYCON HF series, being the most cost efficient and resource saving continuous process for cellulosics and blends with PES, PA and PU fibres.

The two-day trade fair for the functional fabrics industry highlights a wide range of solutions for Manufacturers, Brands and Retailers globally. At DyStar’s booth, we welcome you to discuss opportunities for collaborations that will help to make the industry cleaner.

More information:
DyStar Performance Days
Source:

DyStar Singapore Pte Ltd

 Sustainability Takes Centre-stage At Leading Bangladesh Shows (c) Bangladesh Apparel Exchange
15.10.2019

Sustainability Takes Centre-stage At Leading Bangladesh Shows

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

Gemeinsam nachhaltig handeln: Das World Textile Forum 2019 geht zu Ende (c) World Textile Forum 2019 - Schweizerische Textilfachschule STF
10.09.2019

Working together for a sustainable textile business: Looking back at World Textile Forum 2019

The 2019 World Textile Forum closes its doors after two successful and exciting days.

On September 9 and 10 renowned speakers and experts from the textile business gathered in Zurich to discuss opportunities in the changing textile world. Exciting talks and keynotes illustrated new possibilities for a more sustainable and digital textile industry. While one part of the versatile program focussed on “Sustainable Sourcing” with speakers such as Robert van de Kerkhof (Lenzing AG), Heinz Zeller (Hugo Boss), Daniel Gemperle (Calida) and Anna Maria Rugarli (VF), the topic of “Digital Production” became the centre of attention later thanks to experts like Torbjörn Netland (ETH), Maximilian Kürig (Karl Mayer), Maria Neidhold (Spoonflower) and Holger Max-Lang (Lectra). They offered new perspectives on the sustainable future of the textile industry, presenting innovative sustainable production and business models. The subsequent panels furthered the knowledge exchange between both attendees and speakers and led to lively discussions.

The 2019 World Textile Forum closes its doors after two successful and exciting days.

On September 9 and 10 renowned speakers and experts from the textile business gathered in Zurich to discuss opportunities in the changing textile world. Exciting talks and keynotes illustrated new possibilities for a more sustainable and digital textile industry. While one part of the versatile program focussed on “Sustainable Sourcing” with speakers such as Robert van de Kerkhof (Lenzing AG), Heinz Zeller (Hugo Boss), Daniel Gemperle (Calida) and Anna Maria Rugarli (VF), the topic of “Digital Production” became the centre of attention later thanks to experts like Torbjörn Netland (ETH), Maximilian Kürig (Karl Mayer), Maria Neidhold (Spoonflower) and Holger Max-Lang (Lectra). They offered new perspectives on the sustainable future of the textile industry, presenting innovative sustainable production and business models. The subsequent panels furthered the knowledge exchange between both attendees and speakers and led to lively discussions.

Swiss Textile Federation, Swiss Textile & Fashion Institute STF and Gherzi Textil Organisation would like to thank all attendees and look forward to the next World Textile Forum!

(c) Lenzing AG
21.06.2019

Lenzing Group to become the first carbon neutral fiber producer in the world

  • Lenzing sets net-zero CO2 emissions target by 2050
  • Reduction of specific CO2 emissions by 50 percent until 2030
  • Investment of more than EUR 100 mn to combat 1.3 Mt of CO2 emissions
  • Commitment to follow the Science Based Targets concept

Lenzing, member of the CEO Climate Leaders Group of the World Economic Forum and a signatory to the United Nations Fashion Industry Charter for Climate Action, will drastically reduce its CO2 footprint. The Lenzing Group will invest EUR 100 mn over the coming years to reduce carbon emissions both inside its operational boundaries (scope 1+2) and in its supply chain (scope 3). Due to its ambitious CO2 emission reduction strategy, the Lenzing Group will further contribute towards helping customers to transition their business to a lower CO2 base.

A first milestone is set for 2030, when Lenzing plans to reduce CO2 emissions per ton of product by almost 50 percent (scope 1+2 and 3) compared to a 2017 baseline. The total CO2 reduction of all the planned initiatives will yield 1.3 Mt.

  • Lenzing sets net-zero CO2 emissions target by 2050
  • Reduction of specific CO2 emissions by 50 percent until 2030
  • Investment of more than EUR 100 mn to combat 1.3 Mt of CO2 emissions
  • Commitment to follow the Science Based Targets concept

Lenzing, member of the CEO Climate Leaders Group of the World Economic Forum and a signatory to the United Nations Fashion Industry Charter for Climate Action, will drastically reduce its CO2 footprint. The Lenzing Group will invest EUR 100 mn over the coming years to reduce carbon emissions both inside its operational boundaries (scope 1+2) and in its supply chain (scope 3). Due to its ambitious CO2 emission reduction strategy, the Lenzing Group will further contribute towards helping customers to transition their business to a lower CO2 base.

A first milestone is set for 2030, when Lenzing plans to reduce CO2 emissions per ton of product by almost 50 percent (scope 1+2 and 3) compared to a 2017 baseline. The total CO2 reduction of all the planned initiatives will yield 1.3 Mt.

More information:
Lenzing Group
Source:

Lenzing AG

(c) JEC Group
21.06.2019

JEC Forum Chicago 2019: A great success for this new format

JEC Forum Chicago 2019, with its new format combining business meetings and conference sessions was a great success. In fact, with 201 delegates and 490 business meetings organized on site, it reveals that North American composites industrials value this new format.


Business and Knowledge all at once
The forum was the occasion for sponsors to showcase their solutions, industry buyers from all the composites value-chain to easily meet during pre-arranged business, without mentioning a great participation of Top buyers from Arevo, Bollinger Motors, Bouygues – CBNA: Civil & Building North America, and Florida Department of Transportation and John Deere. All confirmed that their meetings were very successful and would be leading to prolific cooperation in the future.

JEC Forum Chicago 2019, with its new format combining business meetings and conference sessions was a great success. In fact, with 201 delegates and 490 business meetings organized on site, it reveals that North American composites industrials value this new format.


Business and Knowledge all at once
The forum was the occasion for sponsors to showcase their solutions, industry buyers from all the composites value-chain to easily meet during pre-arranged business, without mentioning a great participation of Top buyers from Arevo, Bollinger Motors, Bouygues – CBNA: Civil & Building North America, and Florida Department of Transportation and John Deere. All confirmed that their meetings were very successful and would be leading to prolific cooperation in the future.

18.06.2019

15th China International Recycled Polyester Conference & Exhibition

15th China International Recycled Polyester Conference & Exhibition is to be held in China during 18-20 Sep 2019. The forum is jointly organized by Dr. Thiele Polyester Technology and China Chemical & Fiber Economic Information Network (CCFEI), and supported by Recycled Fiber Commission of China Chemical Fiber Association and China National Chemical Fiber Corp.

Having achieved successes during the past 14 years, our China International Recycled Polyester Conference has developed to be the largest international conference of recycled polyester industry in Asian-pacific region. The upcoming 15th China International Recycled Polyester Conference & Exhibition will again gather domestic and overseas raw material suppliers, recycled fiber (regular, hollow and filament) makers, machinery suppliers, downstream consumers, as well as related medium, industry associations and traders, to share valuable opinions of market status quo and perspective.

15th China International Recycled Polyester Conference & Exhibition is to be held in China during 18-20 Sep 2019. The forum is jointly organized by Dr. Thiele Polyester Technology and China Chemical & Fiber Economic Information Network (CCFEI), and supported by Recycled Fiber Commission of China Chemical Fiber Association and China National Chemical Fiber Corp.

Having achieved successes during the past 14 years, our China International Recycled Polyester Conference has developed to be the largest international conference of recycled polyester industry in Asian-pacific region. The upcoming 15th China International Recycled Polyester Conference & Exhibition will again gather domestic and overseas raw material suppliers, recycled fiber (regular, hollow and filament) makers, machinery suppliers, downstream consumers, as well as related medium, industry associations and traders, to share valuable opinions of market status quo and perspective.

Source:

Dr. Thiele Polyester Technology

14.05.2019

PCMC receives prestigious 2019 FTA Technical Innovation Award

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, received the prestigious Technical Innovation Award from the Flexographic Technical Association (FTA) for its recently introduced SteadyPrint print-stabilization technology. This award was presented May 5, 2019, at the FTA Forum 2019 awards banquet held in New Orleans.

SteadyPrint, now part of PCMC’s Fusion and ELS Max flexographic presses, couples innovative patented mechanical designs with cutting-edge disturbance-cancelling algorithms that suppress disturbances associated with the hard edge, largely removing the impact of bounce in flexographic printing. The press automatically learns when the disturbance occurs on each job and implements the cancellation algorithm to minimize or eliminate the impact on print quality.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, received the prestigious Technical Innovation Award from the Flexographic Technical Association (FTA) for its recently introduced SteadyPrint print-stabilization technology. This award was presented May 5, 2019, at the FTA Forum 2019 awards banquet held in New Orleans.

SteadyPrint, now part of PCMC’s Fusion and ELS Max flexographic presses, couples innovative patented mechanical designs with cutting-edge disturbance-cancelling algorithms that suppress disturbances associated with the hard edge, largely removing the impact of bounce in flexographic printing. The press automatically learns when the disturbance occurs on each job and implements the cancellation algorithm to minimize or eliminate the impact on print quality.

“We are extremely excited to be a recipient of the 2019 FTA Technical Innovation Award,” said Rodney Pennings, PCMC’s Printing, Coating and Laminating Sales Director. “The entire PCMC team has worked very hard in developing SteadyPrint over the past couple of years. It is an innovation that we are quite proud of, and we appreciate the accolades that showcase SteadyPrint within the package-printing industry. Winning this award in the year we are celebrating our 100-year anniversary is also incredibly meaningful.”

Source:

Barry-Wehmiller

13.05.2019

The JEC Composites Observer

Looking for up to date global figures of the Composites materials market?
Wondering what is the size of this market in each region of the world?
Hunting for the growth potential per type of material and per industry?

The JEC Composites Observer will address all these questions giving graphs, key figures, market dynamics, opinion statements and insights to illustrate the state of composites globally.
This publication is not just an overview of the composites market: as this first edition is set to become an annual rendez-vous, industrials and application industrials will also be regularly provided with key figures, trends and opportunities in order to develop their business and have an in-depth comprehension of the global composites market.

This specific edition is rife with market data and growth forecast from 2018 to 2023 that will include meaningful market news, trends, figures and growth prospects by:
- Key geographic regions,
- Industrial sectors including Aerospace, Transportation and Automotive, Wind Energy, Marine, Building and Construction and Manufacturing.

Looking for up to date global figures of the Composites materials market?
Wondering what is the size of this market in each region of the world?
Hunting for the growth potential per type of material and per industry?

The JEC Composites Observer will address all these questions giving graphs, key figures, market dynamics, opinion statements and insights to illustrate the state of composites globally.
This publication is not just an overview of the composites market: as this first edition is set to become an annual rendez-vous, industrials and application industrials will also be regularly provided with key figures, trends and opportunities in order to develop their business and have an in-depth comprehension of the global composites market.

This specific edition is rife with market data and growth forecast from 2018 to 2023 that will include meaningful market news, trends, figures and growth prospects by:
- Key geographic regions,
- Industrial sectors including Aerospace, Transportation and Automotive, Wind Energy, Marine, Building and Construction and Manufacturing.

To mark this new JEC Group publication release, a synthesis of The JEC Composites Observer will be presented on June 20th at 8 am during JEC Forum Chicago at Navy Pier.

More information:
JEC Group
Source:

AGENCE APOCOPE

25.04.2019

PERFORMANCE DAYS presents extraordinary fabrics having special added benefits

"Beyond Conventional Function" is the exciting special topic at the PERFORMANCE FORUM of the next PERFORMANCE DAYS. Besides the obvious beauty, which is the main topic at the upcoming trade fair, often it is the fabrics that also hide some special added benefit that are of particular interest.

THE BEAUTY OF FUNCTION is the main theme at the next PERFORMANCE DAYS trade fair for functional fabrics and accessories on May 8-9th, 2019 in Munich. Around 300 exhibitors present various interpretations of beauty across all categories in their functional fabrics. Although obviously designed for beauty, these innovative fabrics also promise many hidden benefits at the same time. At the PERFORMANCE FORUM, a special area on the PERFORMANCE WALL is devoted to the most important of these special fabrics, rather than highlighting just one of the fabrics in the context of an award.

"Beyond Conventional Function" is the exciting special topic at the PERFORMANCE FORUM of the next PERFORMANCE DAYS. Besides the obvious beauty, which is the main topic at the upcoming trade fair, often it is the fabrics that also hide some special added benefit that are of particular interest.

THE BEAUTY OF FUNCTION is the main theme at the next PERFORMANCE DAYS trade fair for functional fabrics and accessories on May 8-9th, 2019 in Munich. Around 300 exhibitors present various interpretations of beauty across all categories in their functional fabrics. Although obviously designed for beauty, these innovative fabrics also promise many hidden benefits at the same time. At the PERFORMANCE FORUM, a special area on the PERFORMANCE WALL is devoted to the most important of these special fabrics, rather than highlighting just one of the fabrics in the context of an award.

The PERFORMANCE JURY selected fabrics from well over 1.100 manufacturer submissions; not only fabrics with an interesting look and feel with essential functions like climate regulation and weather protection for sports, but also fabrics that provide the wearer of the garment with additional benefits and special comfort. These special fabrics represent the motto: "Beyond Conventional Function."

More information:
Performance Days performance
Source:

© 2019 PERFORMANCE DAYS

01.04.2019

China’s booming automotive market presents opportunities for nonwovens producers at China International Nonwovens Expo

China is the world’s undisputed front-runner in the global car market, leading the way in both production and sales. 2018 saw 27.8 million vehicles produced and domestic sales of 28.1 million, and while these numbers were down slightly year-on-year, the opportunities for global textile producers are still unrivalled given the overall size of the market. These opportunities can best be explored at this year’s biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil), which runs from 3 – 5 June in Shanghai.
While CINE features nonwovens & nonwoven products, machinery for nonwovens and raw materials & chemicals for nonwovens for a wide range of applications, it is the potential in the automotive sector that is generating a lot of talk before this June’s event. And considering only around 50% of demand for automotive textiles is met by domestic output, the opportunities for imports from overseas suppliers is high.

China is the world’s undisputed front-runner in the global car market, leading the way in both production and sales. 2018 saw 27.8 million vehicles produced and domestic sales of 28.1 million, and while these numbers were down slightly year-on-year, the opportunities for global textile producers are still unrivalled given the overall size of the market. These opportunities can best be explored at this year’s biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil), which runs from 3 – 5 June in Shanghai.
While CINE features nonwovens & nonwoven products, machinery for nonwovens and raw materials & chemicals for nonwovens for a wide range of applications, it is the potential in the automotive sector that is generating a lot of talk before this June’s event. And considering only around 50% of demand for automotive textiles is met by domestic output, the opportunities for imports from overseas suppliers is high.

While new car sales in China dropped for the first time last year since 1992, production still reached 27.8 million vehicles, including 23.5 million passenger cars and 4.3 million commercial vehicles. Furthermore, strong growth is still evident in new energy vehicle (NEV) sales, as well as exports of all vehicle types. NEV production totalled 1.27 million units last year, a staggering 60% increase, while sales grew by nearly 62%. More e-vehicles are sold in China than rest of the world combined, while the government recently set a target of selling 7 million e-vehicles by 2025, ensuring growth in this sector will remain robust for some time. Exports of all vehicle types in 2018 did not grow as fast as NEVs, but the 1.04 million vehicles produced for overseas markets last year still represented growth of 16.8%.

Premium automotive industry buyers attend CINE
Given CINE’s strong reputation in the Chinese nonwovens sector, a number of leading automobile brands, and textile suppliers to these companies, source at the fair. Previous buyers have included Autoliv, Honeywell, Johnson Controls, Lear Corporation, Lydall, Toyota Boshoku, Volkswagen, Wangbo Co Ltd and more.

This edition, buyers such as these can source from a range of automotive nonwovens suppliers. This includes Shanghai Shenda, one of the country’s largest producer of automotive textiles, who will group together a number of automotive interior suppliers.

This year the fair will take place in a new venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai. Visitor registration for the fair is now open and can be accessed here: http://vis.eastfair.com/CINEPCEN/reg.aspx.

 

 

Source:

Messe Frankfurt

“mtex+” textile fair & convention raises profile and increases international appeal (c) mtex+ / Kristin Schmidt
These Czech exhibitors presented technical textiles and lightweight textile components at the 2018 “mtex+” at Chemnitz Trade Fair Centre. The 8th “mtex+” is being held as the “Fair & Convention for Hightech Textiles” in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 – 10 June 2020.
20.02.2019

“mtex+” textile fair & convention raises profile and increases international appeal

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 

  • 8th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

More information:
mtex
Source:

vti-pressedienst      mtex+ press service

30.01.2019

China International Nonwovens Expo & Forum returns for third edition this June

China is the world's largest producer and exporter of nonwoven fabrics, as well as having the largest consumer market for products made from nonwovens, making the upcoming biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil) the place to be for industry players from 3 – 5 June. This year’s event will relocate to a different venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai.

“The nonwovens market has been one of the fastest growing sectors of the Chinese textile industry over the last decade, and we expect this to continue in the coming years,” Wendy Wen, Senior General Manager of the fair’s co-organiser, Messe Frankfurt (HK) Ltd, commented. “The demographic changes, evolution of the manufacturing sector and greater awareness of environmental protection that have driven growth in China, among other factors, are also evident in a number of markets in the region, particularly Southeast Asia, so we anticipate production growth will remain strong to meet export demand, even if the Chinese economy slows further.”

China is the world's largest producer and exporter of nonwoven fabrics, as well as having the largest consumer market for products made from nonwovens, making the upcoming biennial China International Nonwovens Expo & Forum (CINE – supported by Techtextil) the place to be for industry players from 3 – 5 June. This year’s event will relocate to a different venue, the Shanghai Convention & Exhibition Center of International Sourcing, located conveniently between Hongqiao airport and downtown Shanghai.

“The nonwovens market has been one of the fastest growing sectors of the Chinese textile industry over the last decade, and we expect this to continue in the coming years,” Wendy Wen, Senior General Manager of the fair’s co-organiser, Messe Frankfurt (HK) Ltd, commented. “The demographic changes, evolution of the manufacturing sector and greater awareness of environmental protection that have driven growth in China, among other factors, are also evident in a number of markets in the region, particularly Southeast Asia, so we anticipate production growth will remain strong to meet export demand, even if the Chinese economy slows further.”

Reports by the China Nonwovens & Industrial Textiles Association (CNITA), the Freedonia Group and Smithers Pira support this. Nonwovens output in China grew year-on-year by 9.67% for the first 11 months of 2018, exceeding the corresponding figure for 2017 of 8.71%, while demand for nonwovens is predicted to reach 4.9 million metric tons in 2022, a 6.9% per year increase over this period.

Turning to the region, in 2015 Asia occupied 43.1% of the global nonwovens market – with China alone accounting for more than half of the share – with this figure expected to increase to 47.1% in 2020. The Freedonia report also notes that healthy growth in markets nearby to China such as India, Indonesia, Malaysia, the Philippines and Vietnam will also fuel nonwovens output in the country to meet export demand.

Globally, nonwovens demand is expected to increase 4.4% per year to 12.2 million metric tons in 2022, with developing regions being the main driver of this, in particular within Asia-Pacific. In the PP nonwovens sector, output is predicted to nearly double between 2013 and 2020, with the major drivers of this growth being baby diaper, adult incontinence and feminine hygiene products. In the durable nonwovens sector, annual growth of 6 to 7% for the period 2017 – 2023 is also anticipated for filtration, engineering construction and packaging uses.

 

More information:
nonwovens Techtextil CINE
Source:

Messe Frankfurt

Final report Heimtextil 2019 (c) Messe Frankfurt
11.01.2019

Heimtextil 2019: A lively start to the new furnishing season gives hope for a good business year ahead

The international home textiles industry has enjoyed a promising start at Heimtextil in Frankfurt am Main, which finished Friday, 11 January. The challenging economic situation and uncertainty in the retail sector were countered by a positive and confident mood at the world’s leading trade fair.

The international home textiles industry has enjoyed a promising start at Heimtextil in Frankfurt am Main, which finished Friday, 11 January. The challenging economic situation and uncertainty in the retail sector were countered by a positive and confident mood at the world’s leading trade fair.

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’. [*For comparison, 2018: 2,975 exhibitors from 64 countries; 68,584 visitors from 135 countries, FKM-tested)]

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’.

One topic that occupied both exhibitors and visitors was the current and future economic situation. A further challenge is the increasingly evident changes that are happening in trade. Increasing revenues and revenue shares in online retailing stand in the way of the efforts made by the stationary retail trade to maintain their inner-city businesses. ‘The small business specialist trade, but also department stores and multibrand stores, and thus the heart of our visitor target groups, are under pressure from the constantly increasing levels of e-commerce. With Heimtextil and our consumer goods fairs in general, we offer these retailers in particular clear perspectives and diverse inspiration in an ambiguous world’, continues Braun.

Heimtextil made it easier for its visitors to access valuable inspiration and business momentum thanks to an optimised trade fair concept and the associated new hall structure. ‘The new concept brought more visitors to the stand’, was the feedback from Andreas Klenk, Managing Director of Saum & Viebahn from Kulmbach in Franconia about hall 8.0 which offered textiles editeurs and manufacturers of curtain and sun protection systems a common platform for the first time. ‘It was the right decision to merge the different segments. We had high quality discussions with respect to both export and domestic business, and are satisfied with the trade fair’.

As part of the new concept, Heimtextil expanded its unique product range across the entire exhibition site and also included the new hall 12, which has been an additional architectural highlight on the Frankfurt exhibition grounds since September.

Top international companies from the Bed & Bath Fashion segment presented their wares here. For the company Curt Bauer from Aue in Saxony, the première of the new hall was a successful one. ‘We're very enthusiastic about the new hall 12. The product range there was very well received. We are very satisfied with the quality of visitors to our stand. In addition to a good frequency of German visitors, we are particularly pleased about growth from China and Russia’, says Managing Director Michael Bauer.

Natural materials, PET and ocean plastics 
Heimtextil set a standard in terms of sustainability: after the first global climate protection agreement for the textile industry was signed by 40 leading fashion companies, organisations and associations at the World Climate Conference in Katowice last December, the focus in Frankfurt was also on environmental progress in the textile industry. Numerous exhibitors presented progressive solutions, for example in the recycling of PET bottles and ocean plastic as well as in the use of certified natural materials. ‘Sustainability was the theme for us at this year’s Heimtextil. Major media players visited us and the 'Green Tour’ guided tour stopped by. We presented many things, including our first vegan duvet and fair silk products, all 100 per cent produced in Austria’, says Denise Hartmann, Marketing Manager at Hefel Textil. The topics of water consumption in the textile industry and microplastics also increasingly came to the fore. The exhibitor directory ‘Green Directory’ alone contained around 150 progressive companies listing sustainably produced textiles. The offer was supplemented by its own lecture series as well as theme-specific tours, which provided valuable impetus and
underpinned the pioneering green position of the trade fair.

Sleep becomes new lifestyle theme
Heimtextil also focused on sleep as one of the upcoming lifestyle trends. While a balanced diet and sufficient exercise are now a natural part of a healthy lifestyle, restorative sleep is still neglected* although it is one of the most important building blocks for long-term physical and mental well-being. At Heimtextil, a number of new products and aspects came to the fore that help people become sensitised to and analyse their sleep behaviour and promote healthy sleep. Around the redesigned hall 11.0 and in the adjoining lecture area ‘Sleep! The Future Forum’, representatives from the national and international bed industry enjoyed attractive product presentations and superb speeches on the topics of sustainability, hospitality, sport and digital.

In addition to the renowned trend show, the trade fair also focused on contract business, particularly in the hotel and hospitality sector, as well as decorative and upholstery fabrics, digital printing solutions and wallpapers.

The next Heimtextil in Frankfurt am Main – its 50th edition – will take place from 7 to 10 January 2020.

*According to a forsa investigation commissioned by the Techniker Krankenkasse

More information:
Heimtextil
Source:

Messe Frankfurt Exhibition GmbH