From the Sector

Today more than ever, sustainability in the fashion sector is an imperative that is reshaping the dynamics of the sector. These are important changes driven both by increasing CSR regulations (for example, Business of Fashion revealed that, according to 87% of players, the new regulations will impact their company in 2024), and by consumers’ habits (increasingly sensitive to the topic and consequently more careful in purchasing choices). In this scenario, Lectra analyzed real-time data from Retviews – its artificial intelligence-based solution specialized in competitive intelligence and automatic benchmarking – and unveils how Retviews’ empowers brands to navigate the complexities of sustainable and optimized collection planning.

According to Retviews data, to face sustainability challenges and best orient in the current complex fashion landscape, it will be crucial for brands to keep 5 key indications in mind:

1. Planning sustainable collections
Faced with the new regulations, brands are called to rethink their strategies, without losing sight on performance. For this reason, brands are already moving to optimize and rationalize the creative processes of their collections with a view to sustainability. In particular, Retviews' real-time data analysis reveals a growing trend towards sustainability in the collections of leading brands, where there are important investments in sustainable fabrics for both upper and lower garments. In particular, in the "Top" section, shirts show the most significant growth year over year among the eco-responsible options.

2. Sustainable prices (in every sense)
In this context, the redefinition of prices requires a strategic balance between market dynamics and the consumer's willingness to pay for products redesigned in terms of CSR. Retviews data shows a significant increase in costs in sustainable top collections. However, has this shift affected stock levels?

3. Inventories: optimized management
Tracking stock levels is crucial to season management, as it helps identify best-selling items and trends, as well as identify which items would sell better at full price versus those that should be discounted.
The new premium prices for sustainable collections require optimization of the sales rate, a waste limitation to minimum and a reduction of unsold goods rate.
Analyzing the tops category - In the tops category, where sustainably made products prevail with significantly higher price points than generic tops, Retviews' real-time data reveals that sustainable collections boast a higher sell-out rate compared to non-sustainable products. This superior sell-out rate underscores consumers' willingness to pay a premium for sustainability

4. Traceability and certification of collections
Certification is essential in verifying sustainability claims, fosters trust and ensures compliance. Not only that, it is also important to understand the value of the certifications and which ones appear most frequently in the various markets so as to make targeted decisions and adapt the assortments accordingly. This also let brands to prioritize the right mix of fabrics that can reflect the desires of local consumers. Retviews data highlights a particular focus on “Recycled Claim Standard” (RCS) certification in Europe and on “Fair Trade” and “Good Cashmere Standard” certified garments in the United States.

5. Mix of sustainable fabrics
About environmental impact, fabrics also play a fundamental role. Through data-driven tools, brands are able to find valuable information on sustainable materials that are gaining tractions in collections and thus make informed and strategic decisions in the process of planning their creations.

The 2nd Textiles Innovation Conference held by KARL MAYER North America proved to be a complete success. The trade event took place from June 25 to 27, 2024 at the headquarters of the KARL MAYER GROUP subsidiary in Greensboro, North Carolina. The conference boasted a turnout with over 200 attendees, exhibitors, and keynote speakers. While the majority hailed from many states across the USA, the event also attracted a global audience, including participants from Italy, Canada, Mexico, and other countries. The central theme: the importance of textiles made in the USA, their value and influence on global markets.

The conference brought together leading industry brands and academic institutions to delve into the future of product development and sustainability in textiles. KM.ON, Black Swan, Meta, and Supreme shared a convergence of ideas, challenges, and groundbreaking advancements shaping the textile landscape. NC State and Kent State universities highlighted their efforts in developing local talent and enhancing research capabilities to meet industry demand for regional supply chains. Manufacturing Solutions Center, Southern Textile Association, and AFFOA (Advanced Functional Fabrics of America) explored research capabilities and technology testing to foster funding opportunities and generate ideas for the future.

The recipe for success also included a lecture program. The conference kicked off with a keynote speech from New Balance, a brand that empowers people through sport and craftsmanship. New Balance MADE U.S., their premium collection manufactured domestically, reflects their commitment to quality and community impact. On day two Kenny Wilsey, Sourcing Director at Dillard’s, shared his expertise to ensure adherence to quality standards and social compliance requirements for private label brands. To complete the speaker series, Allison Hicks, Lead Knit Engineer at Under Armour, inspired attendees with her innovative approach to performance footwear, apparel, and accessories.

Important topics at the conference were sustainability and digitalization: Unifi showcased high-performance fibers made from recyclable materials and pre- or post-consumer waste management initiatives. KM.ON, the digital solution company of the KARL MAYER GROUP, displayed artificial intelligence applications for quality control, supply chain optimization, and predictive maintenance for warp knitting and knitwear production.

The Textile Innovation Conference program was rounded out by an exhibition of selected textile supply chain partners. These business partners supplemented the information about innovation presented in the lectures and performance demonstrations of the latest STOLL flat knitting and KARL MAYER warp knitting machines.

Bemberg™ by Asahi Kasei presents its Velutine™ Evo brand, a finishing refinement technology developed by the Japanese laboratories of Asahi Kasei for Bemberg™. It offers a new way to generate fibrillation, featuring fabrics with a more “quiet-relaxed” appearance combined with a delicate and sensitive touch. VelutineTM Evo also brings environmental, global warming (CO2 emission) and water profiles for the benefit of BembergTM partners in the manufacture.

The roll out of the evolved VelutineTM Evo technology will start its journey and activation with Infinity, a BembergTM partner and textile manufacturer located in Rovereto, in the Trentino Alto Adige area of Italy. Research and experimentation with new materials and finishings are part of Infinity’s daily work and results are guaranteed through attention to traceability, the use of certifications, and quality control throughout the process. Each material is closely selected from a sustainability standpoint, while the chemical impact of treating textiles is something that they also take extremely seriously. Infinity guarantees the traceability of every product that they make. Every step of the working process can be traced, thanks to a network of trusted suppliers who share their ethos and values.

Asahi Kasei is also releasing the LCA study report - Life Cycle Assessment. The study evaluated and quantified the environmental impact indicators associated with the technological processes involved in the production of BembergTM dyed fabric through the application of the traditional technology of fibrillation. LCA report study made by Centro Tessile Serico Sostenibile confirms all the projected data savings:

• Global Warming Potential: 30% reduction in greenhouse gas emissions
• Water consumption for ennobling process: 40% reduction

International technology group ANDRITZ has received an order from Sioen Technical Felts to supply a complete needlepunch line for its production plant in Liège, Belgium. The new line will enable Sioen to produce heavy fabrics in a single step.

Sioen’s Liège plant specializes in the production of technical fabrics used mainly in industrial applications such as pipe lining (CIPP), acoustics, and filtration. The ANDRITZ equipment will allow the customer to produce fabrics of more than 3,500 gsm in a single step, using different types of fibers (recycled PET, OxPan, bicomponent,…) and finenesses. Normally two or three layers have to be needled off-line in a second step to achieve such a fabric weight.

The single-step process results in a higher quality end product by minimizing the risk of delamination, i.e. the separation of layers during use. It also increases productivity by reducing the need for fabric handling.

The ANDRITZ DF-4 needleloom, which can operate in double and single stroke modus, gives Sioen high flexibility to process fabrics with different mechanical charasteristics. Operators can easily switch modes via the remote-control touch screen. The line will be equipped with ANDRITZ’s latest fabric weight profiling technology, ProWin™, to ensure maximum weight evenness.

Start-up of the new needlepunch line is scheduled for Q1 2025.

Mayer & Cie. presented an overview of its current portfolio in the circular knitting sector at the ITM in Istanbul. Two machine types – the SF4 3.2 III and the Relanit 3.2 HS II – and various smart solutions that make circular knitting more efficient were on display. knithawk, a tool for the optical detection of knitting defects, met with interest among the visitors. The same was true for knitlink, Mayer & Cie's hub for digital solutions. Spare parts packages and conversion kits are also in demand for the long-term value retention of Mayer & Cie. machines.

Relanit 3.2 HS II
The Relanit 3.2 HS mechanical single jersey machine offers high productivity, especially in the context of elastic plating. It processes a wide range of yarns and qualities reliably. It is suitable for processing recycled yarns. Their energy consumption is up to a third lower than that of a circular knitting machine with conventional technology.

In Istanbul, Mayer & Cie. presented an updated version of its flagship, the Relanit 3.2 HS II. The new open-width take down is the single component that attracted the most interest. It ensures a uniform pull-off tension of the knitted fabric over its entire circumference. The knitted hose is only opened below the take-down rollers. Furthermore, the take-dwon is equipped with two drives: one for tensioning, one for rewinding. Both can be controlled separately.

Another innovation of the Relanit 3.2 HS is aimed at reducing downtimes: The needle with predetermined breaking point, which was developed together with Groz-Beckert, prevents it from breaking uncontrollably and, in the worst case, breaking needle butt. The new spring sinker is also a joint development with Groz-Beckert. This makes the Relanit 3.2 HS II run more smoothly, produce less noise as well as with less wear and tear.

SF4-3.2 III for lightweight three-tread fleece knitted fabrics
With its SF4-3.2 III, Mayer & Cie. is addressing a trend in the clothing industry that is reflected beyond Turkey: lightweight, elastic three-thread knitted fabrics in both pure cotton and blends.

New Control 5.0 machine control system
Both ITM machine exhibits were on display with the new Control 5.0 machine control system. Control 5.0 is a prerequisite for using knitlink, the hub for Mayer & Cie's digital applications. In this function, the machine control system attracted interest from various large customers.

In the standard SmartControl version, as shown in Istanbul, a so-called Smart Knob is attached to each machine foot. From there, all the functions that the machine operator needs for his work are available. More in-depth settings, such as those made by the knitting manager, are only possible from a mobile device. Any number of Mayer & Cie. machines can be operated from this at the same time.

knithawk
knithawk, a tool for optical defect detection, inspects the knitted fabric as it is produced. It sits in the single jersey machine directly at the knitting point. If knithawk detects a serious or recurring error, the machine is stopped. The tool also creates an error log.

Machine-specific upgrade and conversion kits
With its upgrade kits, Mayer & Cie. brings technological innovations to existing machines. These range from machine-specific upgrades, such as the Performance Kit for existing Relanit 3.2 models to the Senso Blue RS lubrication system.

In addition to the upgrade kits, Mayer & Cie. offers conversion kits for popular machine types. Two are currently available: for the MV4 3.2 II/MBF 3.2 and the S4-3.2 II/ SF4-3.2 III.

RadiciGroup participated in the fifth edition of Phygital Sustainability Expo, an event dedicated to the ecological transition of fashion and design brands through technological innovation, which was held in Rome on 4 and 5 June.

During the narrated fashion show, held ion the 4th of June in the evocative archaeological site of the Imperial Forum Museum, RadiciGroup presented a jumpsuit. The jumpsuit is made of Radilon Chill-fit, an innovative nylon yarn - made by RadiciGroup in its production sites with low environmental impact. It guarantees thermal regulation and ensures freshness and comfort throughout the day. The jumpsuit worn during the day can quickly turn into the "basis" of an elegant evening outfit by simply adding a kimono-dress, made in nylon, to ensure complete future recyclability.

The outfit is the result of the collaboration between RadiciGroup and the designer Anita Bertini, a young designer at POLI.Design (an international reference for postgraduate training at Politecnico di Milano): the goal is to propose a wardrobe made of essential, durable and recyclable garments, which offer endless possibilities of matching without ever compromising personal style and commitment to a better world.

Two companies from the Italian textile scenario collaborated on this project as technical partners: Calzificio Argopi for the creation of the jumpsuit and Erco Pizzi for the kimono-dress fabric.

Tintoria Finissaggio 2000 is one of the most important Italian companies in the textile finishing sector. Founded in 1973 in Masserano in the textile district of Biella, the company offers the complete range of dyeing of all types of fibres, finishing, digital printing, lamination and membrane lining. These processes are used to give fabrics certain properties, such as colour, pattern, softness, shine or waterproofness.

At Tintoria Finissaggio 2000, customers benefit from the fact that all processes are handled under one roof, from design support to the finishing of fabrics, combining decades of experience with the new possibilities of lamination and digital printing. The dyeing plant in Masserano is a state-of-the-art facility that fulfils the strictest environmental standards. In general, Tintoria Finissaggio 2000 continuously invests in state-of-the-art technologies and production facilities in order to achieve high-quality results while ensuring sustainable production processes.

Tintoria Finissagio 2000 also focused on innovation when equipping a new stenter frame. The company opted for the latest development from German machine manufacturer Mahlo GmbH + Co. KG: the Orthopac RXVMC-20 automatic straightening system. The new straightening concept is specially designed for processing textiles with high distortion dynamics, i.e. textiles with highly variable distortion. Two individually controlled and driven straightening modules with a total of three bow and four skew rollers ensure that bow and skew distortions are corrected in small steps. The control concept is also new. A scanner group at the infeed of the straightener detects distortions even before they reach the correction rollers. This means that the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outfeed also recognises any residual distortion, which is then corrected on the second straightening module.

Juki America and Coloreel revealed a partnership that will extend Coloreel’s thread dyeing technology to the sewing industry. With Coloreel, Juki sewing machines can now access millions of precise colors in real time.

Juki’s distributors will get exclusive rights to market and sell Coloreel for sewing machines within North and South America. The first official installation of Coloreel paired with a Juki sewing machine will be at FABRIC Incubator in Arizona, USA, a fashion incubator and garment manufacturer that supports up-and-coming designers.

adidas introduces its 15-piece SS24 Paris Collection ahead of the 2024 clay season. Built to help players adapt to clay court conditions, the collection includes a core 8-piece range of apparel and footwear to help raise awareness of adidas’ annual Move For The Planet activation.

Designed to be played in seasonably warm Parisian temperatures, the collection features HEAT.RDY technology – breathable and lightweight fabrics that maximize airflow, to help keep players feel comfortable on court. Meanwhile increased mobility is unlocked thanks to adidas’ FreeLift Construction – a paneled fabric structure under the armpits – that enables greater freedom of arm movement during play while preventing the hems from riding up.

The pieces have been intentionally paired back, using zero prints to allow other bolder design features to make maximum impact, through striking color blocking, engineered paneling and textured fabrics. White and black panels on the garments emulate classic tennis court lines, highlighted by black bonding seams, meanwhile a stimulating Orange ‘Spark’ is used throughout to foster a sense of joyful energy for players during high-pressure games.

The collection will be worn by athletes including Caroline Wozniacki , Elina Svitolina, Xinyu Wang, Dana Mathewson, Jessica Pegula, Maria Sakkari, Stefanos Tsitsipas , Felix Auger Aliassime, Jason Wu and Martin de la Puente.

adidas have unveiled an innovation in the sport of wheelchair basketball. Born from extensive feedback and research with wheelchair athletes, the uniforms were developed by the adidas Innovation team in Portland in close collaboration with Adaptive Sports Northwest, a non-profit organization for adaptive athletics. The uniforms will be worn by the PNW Reign women’s wheelchair basketball team for the first time as they set out on a quest to win the NWBA Tournament on April 26-28, 2024.

Earlier in April, during the reveal of the adidas kits for the Paris 2024 Olympic and Paralympic Games, the sports brand announced that 86% of pieces of apparel worn on and off the field of play have been created using design principles that ensure they work for athletes with and without a disability alongside the development of adaptive training apparel.

The new wheelchair basketball jersey and shorts feature ergonomic advancements in pattern engineering, specifically tailored for seated positions to reduce bulk and increase comfort. Materials were selected based on detailed athlete feedback sessions and data analysis to unlock performance for seated athletes. The uniform features lightweight woven front panels for durability and full mesh back panels for breathability. Focus on the fit was paramount to deliver a uniform that felt light and comfortable.

Players of both genders have actively participated in rounds of feedback and ergometer testing sessions to measure maximum speed over pushes, providing the adidas team with invaluable insights into the mechanics of speed that will inform future research and development. In addition, the feedback was used to measure fit, performance, durability, and overall comfort to make the uniforms match the needed requirements. Finally, through the validation process, the PNW Reign basketball team confirmed that adapted patterns have been proven to reduce fabric bulk, decrease heat build-up and enhance confidence.