From the Sector

Reset
241 results
03.03.2021

CHIC Shanghai takes place on March 17 to 19, 2021

  • CHIC Shanghai, March 17 to 19, 2021 (due to new regulation to control the infection rate)
  • 905 exhibitors are present at CHIC
  • Parallel: CHIC ONLINE as a digital platform with upgrade of the CHIC
  • APP
  • CHIC GARDEN: puts fashion and sustainability in the limelight

The CHIC spring event takes place from March 17th to 19th under strict hygiene guidelines in the National Exhibition & Convention Center in Shanghai parallel to Intertextile Shanghai, Yarn Expo and PH Value.

The Chinese economy has recovered again after the pandemic in China and already reached pre-crisis level with 6.5% growth in the fourth quarter of 2020. McKinsey estimates are a 5 to 10% growth in sales in China in 2021 compared to 2019. Thanks to good sales in China, the fashion luxury brands in particular have been able to improve their sales figures. But also regarding online trade, Chinese ecommerce sales were in first place worldwide for the eighth year in a row. The average per capita income of consumers rose by 3.8% last year.

  • CHIC Shanghai, March 17 to 19, 2021 (due to new regulation to control the infection rate)
  • 905 exhibitors are present at CHIC
  • Parallel: CHIC ONLINE as a digital platform with upgrade of the CHIC
  • APP
  • CHIC GARDEN: puts fashion and sustainability in the limelight

The CHIC spring event takes place from March 17th to 19th under strict hygiene guidelines in the National Exhibition & Convention Center in Shanghai parallel to Intertextile Shanghai, Yarn Expo and PH Value.

The Chinese economy has recovered again after the pandemic in China and already reached pre-crisis level with 6.5% growth in the fourth quarter of 2020. McKinsey estimates are a 5 to 10% growth in sales in China in 2021 compared to 2019. Thanks to good sales in China, the fashion luxury brands in particular have been able to improve their sales figures. But also regarding online trade, Chinese ecommerce sales were in first place worldwide for the eighth year in a row. The average per capita income of consumers rose by 3.8% last year.

905 exhibitors and 932 brands will present themselves on site at CHIC. Around 95,000 trade visitors from all retail areas, including all relevant online sales platforms, are expected. The CHIC's online and live streaming events, which run parallel to the trade fairs, have recorded an average of 150,000 clicks on each show since April last year.

CHIC Garden
China is to become climate neutral by 2060, which of course also affects the fashion sector. Overall, the awareness of Chinese consumers has developed even more towards high-quality, sustainable collections. In their "State of Fashion 2021" report, McKinsey & BoF analyze the awareness development in China that consumers and producers are increasingly recognizing the importance of joint efforts by all participants in the value chain to work together in order to achieve sustainability in the fashion industry.

The CHIC flagship event visualizes this topic with the "CHIC Garden" theme. With the help of garden design experts, the fair is transformed into an inspiring garden paradise that reflects closeness to nature and the appreciation of natural resources.

As an exception, the CHIC autumn event, CHIC Shanghai will take place in August this year (25th to 27th August 2021).

Source:

JANDALI

ITM of TU Dresden – your research partner in the field of virtual product development at ISPO Munich © ITM/TU Dresden
Draping properties - variety of materials
01.02.2021

ITM presents itself for the first time at ISPO Munich Online 2021

  • ITM of TU Dresden – your research partner in the field of virtual product development at ISPO Munich
  • ISPO Munich Online 2021 – the world´s leading sports business platform from February 1st to 5th 2021

The Chair of Assembly Technology for Textile Products of ITM presents itself for the first time at ISPO Munich Online 2021 – showcasing its expertise in the field of virtual product development. Its know-how in the determination of material parameters, digital data processing, and data transfer will be presented as well as its competencies in 3D/4D body shape recording via scanning, data animation for the 3D product development for functional clothing, and simulation for wear comfort/usage visualization. The Chair of Assembly Technology for Textile Products of ITM has manifested its leading global position in the virtual product development sector by successfully completing a variety of national and international interdisciplinary research projects.

  • ITM of TU Dresden – your research partner in the field of virtual product development at ISPO Munich
  • ISPO Munich Online 2021 – the world´s leading sports business platform from February 1st to 5th 2021

The Chair of Assembly Technology for Textile Products of ITM presents itself for the first time at ISPO Munich Online 2021 – showcasing its expertise in the field of virtual product development. Its know-how in the determination of material parameters, digital data processing, and data transfer will be presented as well as its competencies in 3D/4D body shape recording via scanning, data animation for the 3D product development for functional clothing, and simulation for wear comfort/usage visualization. The Chair of Assembly Technology for Textile Products of ITM has manifested its leading global position in the virtual product development sector by successfully completing a variety of national and international interdisciplinary research projects.

Researchers of the Chair of Assembly Technology for Textile Products have been actively involved in the preparation and digital representation of material samples for the ISPO Textrends Forum. Thus, the material parameters of the ISPO Textrends Award textiles were determined for 3D fit simulations in Vidya (Assyst/Vizoo), automatically analyzed, and digitally processed by the specially developed "Material Analyzer" software. This software in addition to other state-of-the-art CAE infrastructure, such as the recently installed 4D Scanner Move4D, are essential for the further establishment and promotion of its leading position in the field of digitalization and virtual product development for garments for high-tech applications.

The researchers involved eagerly await future collaborations in this promising field of research. This pilot project presented at ISPO 2021 was coordinated by the company FOURSOURCE Group GmbH, thus enabling the characterization and 3D visualization of the award-winning materials that are presented to all visitors at ISPO 2021.

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events
JEC Summit Sports & Health - Connect
15.12.2020

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

“Following the enforced postponement of many trade shows, we took the step of becoming the first organizer to stage an online event dedicated to composites in the sports and health industry. We put together a high-level conference agenda and speaker roster, and devised some great ideas for virtual networking, said Christian Strassburger, Event Director at JEC Group. “I could not be prouder of what we achieved with many delegates from Europe and Americas tuning in, including representatives from more than 36 countries. I would also like to take this opportunity to thank all our sponsors and partners. Their trust, support, and input were a crucial part of both the quality and success of the summit.”

The event attracted an audience of more than 1,100 professionals from the composites industry, from 36 countries, and helped organize 216 pre-arranged one to one meetings between buyers and sellers via our dedicated online meeting rooms, this without mentioning informal networking between participants. It reached these numbers, as participants logged on in considerable numbers to learn from the insights and ideas of the unparalleled line-up of high-level speakers who took part in the summit’s twenty-track conference.

The agenda for the JEC Summit Sports & Health – Connect featured tracks on current trends and Innovations in sports & health composite applications, with keynotes delivered by Dominic LeBlanc Senior Concept Engineer, at Callaway Golf, Christophe Lecomte, Director of Biomechanical Solutions R&D, at Össur, Fleur Jong, Professional Sprinter, and Co-founder of the Para Athletics Foundation and Damiano Salvatori, Materials Research Engineer, at the Straumann Group.

The panel of high-profile experts from Europe and America offered perspectives and inspiration for the next generation of medical and sports devices made of composites materials. The line-up included Bjorn Ivar Austrem, Technical Director, at Madshus, Laurine Calistri, Research Engineer, at Proteor, Anatole Gilliot, CEO of Suprem, Julien Duplay, Composites Methods Engineer, at Decathlon, Eric Jackson, President of Apex Watercraft, Stéphan Vérin, General Secretary, at EuraMaterials, Maximilian Segl, Principal Expert Composites, and Johannes Wölper, Development Engineer, both from Ottobock, and Matthew Dickinson, Senior Lecturer in Engineering, at University of Central Lancashire. Christos Karatzias, at Mitsui Chemicals Europe and Anthony Bert, at Helicoid Industries.

And one cannot omit the international startups that pitched all through the three-day event: ProsFit (Bulgaria), Alchemy (Greece), moi composites (Italy), Mercuris (Germany), Arevo/Superstrata (USA), Checkerspot/WNDR Alpine (USA), Ambrocio (Finland) Nairoby (Argentina). All gave inspiring and promising perspectives in the sector and what to look for in the near future.

Source:

JEC Press Relations

04.12.2020

Intertextile Shanghai Home Textiles March 2021

The Spring Edition of Intertextile Shanghai Home Textiles will return to the National Exhibition and Convention Center (Shanghai) from 10 – 12 March 2021, together with four other textile events including Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value. The fairs will offer an all-round business platform and a host of exciting synergy effects for the sector.

High-quality finished products to be offered
In March 2021, the Spring Edition will showcase a selection of home textile products including bedding & towelling, rugs, table & kitchen linen, home textile technologies, textile design and many more. Additionally, the fair will be held concurrently with Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value, offering a comprehensive sourcing platform for the sector.

The Spring Edition of Intertextile Shanghai Home Textiles will return to the National Exhibition and Convention Center (Shanghai) from 10 – 12 March 2021, together with four other textile events including Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value. The fairs will offer an all-round business platform and a host of exciting synergy effects for the sector.

High-quality finished products to be offered
In March 2021, the Spring Edition will showcase a selection of home textile products including bedding & towelling, rugs, table & kitchen linen, home textile technologies, textile design and many more. Additionally, the fair will be held concurrently with Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value, offering a comprehensive sourcing platform for the sector.

Lenzing views Intertextile as an ideal platform to present their sustainable home products
The Lenzing Group, a leading producer of man-made cellulose fibres, is amongst the major industry players who have already confirmed their participation in the upcoming fair. Ms Lesley Wu, Home Textile Business Development at Lenzing Fibers (Shanghai), talked about new market trends in the post-pandemic era and the reasons they decided to join the Spring Edition of Intertextile Shanghai Home Textiles:

“Even though the home textile industry has, to some extent, been negatively impacted by the COVID-19 outbreak, there are both opportunities and challenges for the sector. Without a doubt, environmental protection and sustainable development are the hottest topics in today’s society. Consumers are paying more attention to healthy lifestyles and looking to make a shift to green consumption as a result of the pandemic. More and more consumers are opting for functional and sustainable raw materials. Environmentally sustainable fibres are therefore gaining popularity.”

“Right now, we expect the home textile industry will continue its steady recovery. Home textile companies may look for opportunities in product and marketing innovations, such as developing functional and sustainable home textile products and exploring various O2O business model options,” Ms Wu added.

Lastly, Ms Wu shared why they chose to participate in Intertextile: “We decided to exhibit at Intertextile Shanghai Home Textiles because it is an influential trade fair for the industry. As the Lenzing Group has been expanding in the home textile market, we want to use this platform to showcase the applications for TENCEL™ branded fibres in home textiles, and to further promote sustainability through our TENCEL™ Home cellulosic fibres.”

To find out more about this fair, please visit: www.intertextilehome.com

Source:

Messe Frankfurt / Intertextile Shanghai Home Textiles

Frankfurt Fashion Week: hosting the future of fashion © Lottermann and Fuentes
Anita Tillmann and Detlef Braun
02.12.2020

Frankfurt Fashion Week: hosting the future of fashion

  • Looking to the future – Frankfurt Fashion Week is positioning itself with a consistently sustainable agenda and propelling the transformation of a modern, resource-efficient fashion industry.

The Conscious Fashion Campaign (CFC), working in collaboration with the United Nations Office for Partnerships (UNOP), will be the presenting partner and the Sustainable Development Goals (SDGs) will be a prerequisite for all exhibitors by 2023. And the Frankfurt Fashion SDG Summit by CFC is set to become the leading international conference for sustainability in the fashion world. The future of fashion has begun – and its key players will be coming together in Frankfurt am Main from 5-9 July 2021.
 

  • Looking to the future – Frankfurt Fashion Week is positioning itself with a consistently sustainable agenda and propelling the transformation of a modern, resource-efficient fashion industry.

The Conscious Fashion Campaign (CFC), working in collaboration with the United Nations Office for Partnerships (UNOP), will be the presenting partner and the Sustainable Development Goals (SDGs) will be a prerequisite for all exhibitors by 2023. And the Frankfurt Fashion SDG Summit by CFC is set to become the leading international conference for sustainability in the fashion world. The future of fashion has begun – and its key players will be coming together in Frankfurt am Main from 5-9 July 2021.
 
Frankfurt am Main, 2 December 2020. Joining forces to improve the fashion industry: Frankfurt Fashion Week is positioning itself as the host of the future of fashion and actively driving forward the transformation towards a future-oriented, more sustainable fashion and textile industry. All decision-makers looking to instigate this change will be coming together in Frankfurt am Main from 5-9 July 2021. The initiators of Frankfurt Fashion Week – Messe Frankfurt and the Premium Group – have achieved a real coup: Conscious Fashion Campaign, working in collaboration with the United Nations Office for Partnerships, will be the presenting partner. Messe Frankfurt will build on its collaboration with the United Nations Office for Partnerships and establish Frankfurt Fashion week as the platform on which to advance the Sustainable Development Goals and help guide the fashion industry into the 'Decade of Action'.
 
“Frankfurt will play host to the whole world. We are seeing a very positive response indeed,” confirmed Peter Feldmann, Senior Mayor of the City of Frankfurt am Main, at today’s digital press conference, before going on to say: “The fact that the initiators are able to rethink the concept of a Fashion Week in such a way is extremely impressive and proves that the fashion industry is correctly interpreting the signs of the present and future. The time has come for value creation and values to be reconciled. Consistent alignment with the Sustainable Development Goals is an important step in this direction.”
 
“Frankfurt Fashion Week aims to play a crucial role in finding solutions for macrosocial challenges and supporting the goals of international politics such as the European Green Deal. The fashion and textile industries are also expected to be climate-neutral by 2050. If we want to achieve this, we all need to pull together. Frankfurt Fashion Week is inviting all initiators and supporters of sustainable concepts and congresses or shows dedicated to sustainability to meet in Frankfurt, partake in discussions and make tangible decisions for the greater good. We will connect the most relevant players and pave the way for a future-proof fashion and textile industry,” says Detlef Braun, CEO of Messe Frankfurt.
 
“Given its global reach, the fashion industry is uniquely positioned to collaborate and engage on the Sustainable Development Goals, in particular on climate action and responsible production and consumption,” said Annemarie Hou, Acting Executive Director of the United Nations Office for Partnerships. “Frankfurt Fashion Week and the Summit will serve as an important platform for education and engagement of the fashion and textile industry in the Decade of Action,” emphasised Ms Hou.
 
The aim of Frankfurt Fashion Week is for all exhibitors, participants and partners to align with the Sustainable Development Goals by 2023. The SDGs will also be incorporated into all formats of Frankfurt Fashion Week. This will help to make the UN’s sustainability goals visible and tangible for the Fashion Week audience, therefore bringing its claim, goals and specific proposals for implementation to an international opinion-forming fashion and lifestyle community. During a one-day Frankfurt Fashion SDG Summit presented by Conscious Fashion Campaign, topics like gender equality, clean water, climate protection, social justice and their significance for a forward-looking fashion industry will be examined in greater depth. Another point on the sustainability agenda: Frankfurt Fashion Week is launching a Sustainability Award for outstanding, innovative, sustainable design, alongside other categories with a global appeal for the fashion and textile industry.
 
"We are committed to setting the wheels of transformation in motion. Not only does the overall mindset have to fundamentally change; the entire industry also needs to have the courage to be transparent and honest. It’s important to see values and value creation as opportunities rather than contentious. We are doing what we do best: connecting the relevant players at all levels. With its ecosystem, Frankfurt Fashion Week will become the enabler. We are creating a platform that will orchestrate industry-wide change. With this as our inspiration, we are also developing our tradeshow formats from a ‘marketplace of products’ to a ‘marketplace of purpose and ideas’,” explains Anita Tillmann, Managing Partner of the Premium Group.
 
A new start in Frankfurt: In summer 2021 the entire fashion industry will be coming to the metropolis on the Main river to inform themselves, be inspired, discuss, negotiate and celebrate. “There’s a huge need to finally meet in person again, to exchange ideas and be inspired. At the same time, digital tools and formats have become an integral part of the fashion industry,” says Markus Frank, Head of the City of Frankfurt’s Department of Economic Affairs and therefore also responsible for its creative industry. “To implement such a future-oriented, all-encompassing overall concept, Frankfurt’s business and creative scenes offer an almost unique concentration of different expertise with its internationally networked agencies, universities and museums. The city’s multifaceted, high-end club, bar and restaurant scene, diverse hotel industry and internationally renowned retail landscape will become the stage for this. This network will be a key factor in the successful implementation of Frankfurt Fashion Week and the way in which it will expand into the public space as a cultural and social happening.”
 
A number of major publishing houses are also showing their commitment to the new Fashion Week in Frankfurt with conferences, events and awards: Textilwirtschaft, the leading professional fashion journal by the Deutscher Fachverlag publishing house, is moving its traditional meeting of the industry’s top decision-makers – the TW Forum, the presentation of the renowned Forum Award, as well as its subsequent conference – from Heidelberg to Frankfurt’s Palmengarten botanical gardens, and will therefore be kicking off Frankfurt Fashion Week on Sunday evening and Monday morning. The Frankfurter Allgemeine Zeitung will be hosting its traditional fashion party for the first time in Frankfurt and publishing a special edition of its FAZ Magazin on Frankfurt Fashion Week. And the ZEIT publishing group is holding its ‘UNLOCK Style by ZEITmagazin’ conference, which was established in 2014, and the ZEITmagazin Fashion Week party in Frankfurt for the first time and will dedicate the whole new issue of ZEITmagazin Frankfurt to Frankfurt Fashion Week. Condé Nast will also be involved in next summer’s Frankfurt Fashion Week with an exclusive event by GQ. And the Burda publishing house will also be represented with various event formats from its lifestyle and fashion brands.There will also be talks with SHINE  Conventions, the organiser of GLOW, about what a mutual collaboration could look like.
 
Frankfurt Fashion Week is also delighted to have the Fashion Council Germany (FCG) on board.  The FCG is theinstitution when it comes to German fashion design. It promotes designers, is committed to gaining more political relevance and strengthens the international visibility and awareness of German fashion. At Frankfurt Fashion Week, the FCG will contribute selected formats, such as its already established Fireside Chat, and a future-oriented accelerator format to support German designers.
 
“What really impresses me about Fashion Week is the whole networking aspect: the creative industries will meet the financial world and sustainability is the common denominator. The Green Finance Cluster is another project that we could link with Frankfurt Fashion Week in the future. This will provide new inspiration in the fashion industry, which will certainly extend way beyond its own horizon of Frankfurt and Hesse. After a very difficult year for the trade fair industry, the concept is an encouraging breath of fresh air,” sums up Tarek Al-Wazir, Hesse’s Minister of Economics, Energy, Transport and Regional Development and Deputy Minister-President of the state of Hessen.

04.11.2020

DyStar Exhibits at China Interdye 2020

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

Shanghai, China - DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation will exhibit in the 20th China International Dyestuff Industry, Pigments and Textile Chemicals Exhibition - China Interdye 2020. DyStar will showcase the latest product innovations at Hall 1 booth #A330.

The three-day annual event will be taking place at Shanghai World Expo Exhibition & Convention Center (SWEECC) and opens doors on 8th November. DyStar’s managers will be onsite to support visitors from production houses, manufacturers, and Brands and Retailers with essential information, helping them to make meaningful and notable decisions based on tangible benefits such as reduction of water, waste and energy consumption, thereby improving their end-products and quality.

DyStar’s sustainable solutions can further optimize productions, processes, and reduce costs. Some of these products and concepts are highlighted at the event as follows:
•    Recent launch of Cadira® Polyamide and Cadira Polyester/Cellulosic Exhaust
•    Total collection of eleven Cadira® modules
•    High Fast Dianix® XF2 Range
•    Sera® Wash M-VFN
•    Levafix® CA and Remazol® SAM offer

Despite a year full of global economic challenges, with the supply chain and stakeholders heavily strained by the global pandemic, DyStar is determined to support the industry and its customers. They can benefit from our legacy of innovations and product offerings, so that they can continue to drive sustainability and growth in their respective domains, contributing in a responsible and yet sustainable manner for a cleaner future.

RUDOLF HUB1922 : Innovation rooted into Aspirational Chemistry (c) RUDOLF Group
26.10.2020

RUDOLF HUB1922 : Innovation rooted into Aspirational Chemistry

The textile industry, one of the major industrial sectors worldwide, is going through a significant revolution, with changes taking place in various sections of textile processing. Biotechnology and biomimicry, for example, are continuously playing an important role in redefining the influence of the textile industry on society, and so is progress made in auxiliary chemistry, with advances investigated and then applied in almost every section of textile processing.  The outcome is amazingly promising.

Modern, real science is inextricably intertwined with environmental consciousness and they are definitely not mutually exclusive.

The textile industry, one of the major industrial sectors worldwide, is going through a significant revolution, with changes taking place in various sections of textile processing. Biotechnology and biomimicry, for example, are continuously playing an important role in redefining the influence of the textile industry on society, and so is progress made in auxiliary chemistry, with advances investigated and then applied in almost every section of textile processing.  The outcome is amazingly promising.

Modern, real science is inextricably intertwined with environmental consciousness and they are definitely not mutually exclusive.

At RUDOLF GROUP modern, real science means pushing R&D so to constantly explore new technology and innovations that help transform the textile and fashion industries. We work to reduce the overall dependency on traditional and virgin resources.  Getting textile manufacturers as well as brand and retailers on board is key to achieve real change. By 2030 we aim for a significant fraction of our products to be either sourced through paths alternative to the traditional petrochemicals, or by upcycling waste and/or byproducts from other industries.

“This is the kind of genuine, tangible, environmental consciousness that truly defines us and that entails that RUDOLF GROUP has a responsibility for the needs of society as a whole.” Said Alberto De Conti, Head of Rudolf Fashion Division “We have a maniacal attention to the environmental impact of our operations and products. We have truly embedded in ourselves the notion that “sustainability” is a key issue and critical to the long-term survival of our company and of society at large. “

The combination of modern, real science and environmental consciousness leads to what RUDOLF GROUP call aspirational chemistry something unique and something that positions us as shining example and guiding light throughout the industry. That is, in fact, BETTER CHEMISTRY.

Two are the innovations rooted in aspirational chemistry that RUDOLF HUB1922 presents. The first one is our WASHLESS technology and the second one is a brand new launch: LASER SMOOTHER, which supports laser technology and helps creating much better denim looks.

WASHLESS

HUB1922 WASHLESS, which can be applied to both denim and non-denim, is the simultaneous application of
-    proprietary fluorine-free DWR (Durable Water Resistance) based on biomimicry to repel dirt
-    anti-microbial, anti-bacteria and anti-viral, non-migrating chemistry to stop body odour.
The combination of the 2 translates into garments that don’t require to be washed as much.

Life cycle assessment studies on clothes, detergents and washing machines show that home laundering is always the most energy‐demanding period during these products' life cycle, even higher than production or transportation phases.

“WASHLESS aims at changing consumer habits in clothing maintenance to a more environmentally friendly direction and represents a change that is the most feasible and efficient. Making washing machines obsolete is impossible, but even though the technologies in clothes cleaning have improved greatly, the washing frequency has not been reduced. We own more and more clothing and wash it more frequently. This increased amount of washing counteracts the technological improvements in home laundry. “ said De Conti.

It is only by understanding the climate change impact associated with home laundering that product innovations and consumer education can be explored. Studies consistently show that a carbon dioxide reduction of 105 MT and electricity savings of 142 thousand GWh can be obtained by reducing home laundering, on average, by 1/3. This is roughly equivalent to removing 12% of the 140 M passenger cars in the US, or taking 23 coal power plants off the grid. In addition, more than 60% of water consumed while laundering (2,000 billion liters) can be reduced through these strategies.

LASER SMOOTHER

Laser denim is the current dominant technology available to the denim industry to create locally abraded areas, vintage effects, whiskers, patterns, patches, and even intentional holes and tears in a garment. Laser technology uses less water, harmful chemicals (such as potassium permanganate) and energy to create a wide variety of denim looks.

However, laser is not always able to produce the desired look, on the desired fabric, in the desired time. Therefore, chemical companies have been developing laser boosters that can be pre-applied to the garments in order to intensify the effect of the laser to mimic heavier bleaching applications. Unfortunately, laser boosters can create blurred images where the definition is lower and the overall image less natural.

The brand new RUDOLF HUB1922 LASER SMOOTHER is an all-in-one formulation, very easy to pre-apply to garments before laser burning and that return a very natural image which is very similar to the highly desirable hand scraping. Laser smoother can be applied by traditional exhaust or through nebulization and it dries at normal temperature in normal tumble driers.  Advantages of LASER PRIMER are:

•    Remarkable enhancement of the fabric’s characteristics (heightening of material)
•    Overall effect much more natural and similar to manual scraping (craftsmanship dimension)
•    Reduced required laser power to achieve the wanted effect (conspicuous energy saving)
•    A faster laser burning process (significant time saving, depending on the final effect)
•    Any other chemical spray is not required (environmental friendliness)
•    Reduced cost compared to other solution (financial viability)

More information:
Rudolf Group HUB1922 Denim
Source:

EFFE-BI SRL PR & COMMUNICATION 

Oerlikon: Virtual Exhibition (c) Oerlikon
08.10.2020

Oerlikon at Innovate Textile & Apparel Virtual Trade Show

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

"Reconnecting innovation in the textile & apparel value chain" is the motto of WTIN's virtual trade show. And Oerlikon intends to more than live up to this motto. With more than 50 active experts from sales, customer service and technology as well as partners from its international network of representatives, the Manmade Fibers segment of the Swiss Oerlikon Group will try to be represented around the clock. "It is an interesting experiment for all of us and we would like to see it succeed," explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. "Our aim is to meet our existing customers again, make new contacts and see 'old friends' from the industry. We have prepared an attractive digital offer for them all. Those of you who missed our roller coaster ride in Barcelona last year can now enjoy the journey through time in peace and quiet from your home office on your digital tour of the fair. And, there are no more waiting times either," promises Wissenberg.

Factory know-how from a single source
From Melt to Yarn, Fibers and Nonwovens. From the polycondensation and the processing of PTA and MEG as well as the extrusion of, for example, recycled polyester chips all the way through to hundreds of thousands of packaged and stored or directly-delivered textured bobbins for a market within the textile industry worth billions. From the planning and construction of highly complex production plants to the engineering of large-scale plant projects and competent customer services. This business model runs like a red thread through the self-conception of the Manmade Fibers segment of the Swiss Oerlikon Group. The right partner, especially – but not exclusively – for newcomers to the textile industry. "With us they get everything they need for a successful business: Factory know-how from a single source. And that's what we would like to show our visitors at our virtual trade fair booth," says Wissenberg.

Two ISKO I-SKOOL™ 7 looks make their debut at the Graduate Fashion Foundation (c) Isabel Hambly
Isabel Hambly Catwalk
23.09.2020

Two ISKO I-SKOOL™ 7 looks make their debut at the Graduate Fashion Foundation

Two ISKO I-SKOOL™ 7 looks make their debut at the Graduate Fashion Foundation, part of London Fashion Week, a springboard for new talent striving to bridge the gap between education and industry.

Following an unprecedented academic year, GFF celebrates how the Class of 2020 have adapted and overcome adversity to complete their degrees across 26 fashion specialisms, from Design and Knitwear to Comms, Marketing and Business. London, 17-22 September – To bring together fashion educators and industry leaders and to support their graduates to reach their full potential once they have graduated: this has always been GFF’s main goal for the past 28 years. Now more than ever, GFF continues in its long-standing commitment to share good practice and knowledge and to inspire students to become innovators, environmental leaders, employees, and educators while promoting cultural diversity and inclusivity within an international platform – very much in keeping with ISKO I-SKOOL™ values and approach which resonate throughout the contest’s Denim Awards.

Two ISKO I-SKOOL™ 7 looks make their debut at the Graduate Fashion Foundation, part of London Fashion Week, a springboard for new talent striving to bridge the gap between education and industry.

Following an unprecedented academic year, GFF celebrates how the Class of 2020 have adapted and overcome adversity to complete their degrees across 26 fashion specialisms, from Design and Knitwear to Comms, Marketing and Business. London, 17-22 September – To bring together fashion educators and industry leaders and to support their graduates to reach their full potential once they have graduated: this has always been GFF’s main goal for the past 28 years. Now more than ever, GFF continues in its long-standing commitment to share good practice and knowledge and to inspire students to become innovators, environmental leaders, employees, and educators while promoting cultural diversity and inclusivity within an international platform – very much in keeping with ISKO I-SKOOL™ values and approach which resonate throughout the contest’s Denim Awards.

Designers Kotryna Adomaityte and Isabel Hambly from Nottingham Trent University were 2 of the 9 winners of the ISKO I-SKOOL™ 7 Awards, announced in a phygital ceremony held on July 22. The two students were invited to showcase their winning creations at GFF. Kotryna, winner of the ISKO I-SKOOL™ PERICOLO Award by Cadica Group, impressed the audience with her “Wild West Denim” look to London at the GFF Showroom.

Isabel Hambly, winner of the ISKO I-SKOOL™ Best Marketable Product, stole the show with her “Women at war” outfit which was displayed at the Catwalk Show, live-streamed from Samsung KX on September 22. That two of ISKO I-SKOOL™ 7 winners and finalists were part of this important event is proof of the significant role the contest – developed and supported by ISKO – plays in nurturing and championing talent and creativity. This edition’s main concept was world’s citizenship, with the Creative Theme “North, East, South, West – connected by one planet”. The twenty shortlisted finalists were asked to dig into their roots and to approach different cultures, defining and tracking down the geography of the world connecting them through responsibility. In addition to exploring the planet both locally and globally, they were also required to take into account the product life cycle of their outfits – featuring a 5-pocket jeans to interpret their view on the “local” concept and two Denim Show Pieces to reflect their worldwide influences and topics of interest. These were made with top ISKO™ denim fabrics, meeting the designers’ needs and providing a strong sustainable ingredient.

“We are really proud that two of our winners made it to GFF, with which we have many values in common – it marks another important step in their journey” said ISKO Senior Executive ISKO I-SKOOL™ Project Irem Orhun. “All of this goes to show how ISKO I-SKOOL™ plays a fundamental role in providing the foundation to enter the industry more aware of your skills and capabilities.”

Reach Group: Composites China Trade Show (c) REACH Group
10.09.2020

AMAC/Germany and REACH Group/China: first life business activity since Covid-19 at the Composites China Trade Show in Shanghai

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

Daniel He describes the situation: „The Chinese market is picking up again; a price increase of 7% for glass fibers was announced right before the China Composites Show, on August 25th 2020, which was even leading to a temporary material shortage. Today, the most booming industries in China are wind energy, building and infrastructure and innovation for electric cars. Unlike the rest of the world, where the aircraft industry undergoes a deep decline, in China it takes up by 50 %, which is very promising. Furthermore, we expect half a year for a full recovery of the industry, while the China growth of 2020 is still expected to be between 2 and 4 %.“

Michael Effing replied: “Enabling the composites business between China and Europe is the aim of our cooperation with Reach and with our customers, which are active in digital automatization, testing equipment or cost optimization software. We are very happy to have been present in China through our representant Reach and are looking forward to bridge and overcome the Covid-19-crisis with our upcoming event in Germany, the Composites for Europe in Stuttgart in November and hope to be back to full global business speed at the JEC in Paris in 2021.“

Source:

AMAC GmbH

Archroma starts production of hand sanitizers to help fight COVID-19. © 2020 Archroma
Archroma starts production of hand sanitizers to help fight COVID-19.
13.07.2020

ARCHROMA Starts Production of Hand Sanitizers to Help Fight COVID-19

As part of its active engagement in the fight against COVID-19, Archroma, a global leader in color and specialty chemicals towards sustainable solutions, started bulk production of a new range of hand sanitizers at its Landhi site in Pakistan in May 2020. The new Kieralon® HS range was developed by the R&D team at the Archroma Center of Excellence in Karachi, in line with the World Health Organization (WHO) recommendations.

Sanitizers are currently in high demand in Pakistan in hospitals, isolation centers, medical institutes and other health care environments, due to the COVID-19 outbreak. The use of sanitizers has also been made mandatory in all factories, offices and public places, driving the demand even higher.

The Kieralon® HS range is being produced in different grades and concentrations to eliminate a broad range of germs, bacteria and viruses, to cater for various healthcare and hygiene requirements. They also include emollients and display non-stick and quick drying effect, for skin comfort.

As part of its active engagement in the fight against COVID-19, Archroma, a global leader in color and specialty chemicals towards sustainable solutions, started bulk production of a new range of hand sanitizers at its Landhi site in Pakistan in May 2020. The new Kieralon® HS range was developed by the R&D team at the Archroma Center of Excellence in Karachi, in line with the World Health Organization (WHO) recommendations.

Sanitizers are currently in high demand in Pakistan in hospitals, isolation centers, medical institutes and other health care environments, due to the COVID-19 outbreak. The use of sanitizers has also been made mandatory in all factories, offices and public places, driving the demand even higher.

The Kieralon® HS range is being produced in different grades and concentrations to eliminate a broad range of germs, bacteria and viruses, to cater for various healthcare and hygiene requirements. They also include emollients and display non-stick and quick drying effect, for skin comfort.

In April 2020, Archroma announced the introduction in Brazil of Mowiplus® HPC 9600, a new thickener for sanitizing gels, developed to address the global shortage in the thickener traditionally used for sanitizing gels.

Archroma is also actively supporting manufacturers in the production of face masks and medical protective equipment. Its antimicrobial and barrier products in particular are in high demand, and Archroma is making every effort to assist existing and new customers entering this sector by providing technical know-how and support.

The company is supporting producers of packaging & paper who are facing high demand for food packaging as many restaurants have switched to delivery or take-away, as well as for parcels and boxes supporting online shopping.

Mujtaba Rahim, CEO of Archroma Pakistan comments, “Within Archroma we are cognizant of the acute community need for high quality hygiene products that are also comfortable for users, as hand sanitizers tend to be harsh on the skin, so we took on the challenge to develop and start production in record time. The Archroma team in Pakistan won’t rest in fighting the COVID-19 pandemic, and hopes this new product will help to stop the spread of the virus and the suffering that it causes.”

Source:

EMG for Archroma

10.07.2020

PREMIUM+SEEK PASSPORT: The first Digital Trade Show launches July, 14

The PREMIUM GROUP and its partner, JOOR, the largest B2B wholesale platform in the world, have together developed a digital marketplace showcasing a curated portfolio of brands compiled in partnership with the relevant retailers. The first digital trade show in the world launches on 14 July 2020: PREMIUM+SEEK Passport.

The JOOR Passport platform is geared towards the current market conditions, where only limited travel is permitted, as well as towards the time after the pandemic when physical events will be able to take place again.

The trade show experience is condensed into a one-stop shop for users: one website, one app to search for and find suppliers, and one place to upload and access data and content – in short, one comprehensive digital experience.

The digitalisation of business interactions represents a year-round marketplace where retailers can discover new styles and designers, and brands can generate new contacts.

The PREMIUM GROUP and its partner, JOOR, the largest B2B wholesale platform in the world, have together developed a digital marketplace showcasing a curated portfolio of brands compiled in partnership with the relevant retailers. The first digital trade show in the world launches on 14 July 2020: PREMIUM+SEEK Passport.

The JOOR Passport platform is geared towards the current market conditions, where only limited travel is permitted, as well as towards the time after the pandemic when physical events will be able to take place again.

The trade show experience is condensed into a one-stop shop for users: one website, one app to search for and find suppliers, and one place to upload and access data and content – in short, one comprehensive digital experience.

The digitalisation of business interactions represents a year-round marketplace where retailers can discover new styles and designers, and brands can generate new contacts.

On the summer trade show dates the seasonal brand lookbooks curated by PREMIUM and SEEK can be uploaded to individual profiles and key looks can be presented in virtual showrooms. The PREMIUM GROUP translates the recipe for success – Commerce, Content and Community – for the digital sphere. Buyers can find out the latest on style and trend stories on the PREMIUM+SEEK Passport homepage, which also highlights key themes such as sustainability. This enables retailers to continue to gain inspiration from brand worlds, to keep abreast of developments and discover new things.

More information:
PREMIUM SEEK
Source:

PREMIUM Exhibitions GmbH

Industry players from key international markets gather at Intertextile annually (c) Messe Frankfurt
Industry players from key international markets gather at Intertextile annually
05.03.2020

Strong exhibitor registration shaping up for Intertextile Shanghai Home Textiles – Autumn Edition

Exhibitor registration for the Autumn Edition of Intertextile Shanghai Home Textiles has been strong since applications opened in December last year. Renowned global players such as D Décor Home Fabrics (India), G.M. Syntex Pvt (India), Naturtex (Hungary) and SIC Global Textiles (Poland) are amongst those to have already confirmed their participation. Held from 24 – 26 August 2020, the fair is the largest trade platform in China for international buyers to meet potential supply partners in the second half of the year. The fair’s early bird discount will be extended until 30 March. Interested companies can register online to enjoy a 10% discount.

Discover abundant new products and design trends
As the leading business platform for the home and contract textile industry in the Asia Pacific region, participants of Intertextile can always discover the latest innovations and trends of the textile and interior design industry. This year, the fair continues to cover the entire spectrum of home and contract textile products including:

Exhibitor registration for the Autumn Edition of Intertextile Shanghai Home Textiles has been strong since applications opened in December last year. Renowned global players such as D Décor Home Fabrics (India), G.M. Syntex Pvt (India), Naturtex (Hungary) and SIC Global Textiles (Poland) are amongst those to have already confirmed their participation. Held from 24 – 26 August 2020, the fair is the largest trade platform in China for international buyers to meet potential supply partners in the second half of the year. The fair’s early bird discount will be extended until 30 March. Interested companies can register online to enjoy a 10% discount.

Discover abundant new products and design trends
As the leading business platform for the home and contract textile industry in the Asia Pacific region, participants of Intertextile can always discover the latest innovations and trends of the textile and interior design industry. This year, the fair continues to cover the entire spectrum of home and contract textile products including:

  • Decorative Fabrics (Upholstery & Curtains)
  • Bedding, Bath, Kitchen & Table
  • Carpets & Rugs
  • Sun-Protection
  • Wallcoverings
  • Textile Editors
  • Whole Home Products
  • Digital Print & Technics
  • Fibres, Yarns & Chemicals
  • Textile Designs

In addition, Intertextile is pleased to cooperate with the renowned international forecasting agency NellyRodi™ from France again in presenting the hottest international home furnishing trends. A trend committee led by NellyRodi and formed by top forecasters including Carlotta Montaldo, Juliette Lamarca, Shen Lei and Studio NOCC will be responsible for determining the major design trends which will be demonstrated in the three-day fair via a series of events and displays. More details about the trends will be announced soon.

Source:

 Messe Frankfurt

Trevira CS sample wall in the special exhibition "Textile Future by Trevira CS“ (c) Trevira
Trevira CS sample wall in the special exhibition "Textile Future by Trevira CS“
28.02.2020

Trevira at BCFA Open Berlin

Trevira will be joining the first BCFA Open Berlin pop-up exhibition, which will be held at the British Embassy on 6 May at the same time of Berlin Design Week (4 – 10 May 2020). The one-day fair is being organised by the British Contract Furnishing Association (BCFA), and members of the association will have the opportunity to display their products in the atrium of the post-modern embassy building.  

At the exhibition, specially invited interior designers and furnishers, along with purchasers from the contract market, will be able to find out more about the collections and products of high-end British manufacturers and textile houses, and attend interesting talks by two top specialists of the sector.

Trevira will be joining the first BCFA Open Berlin pop-up exhibition, which will be held at the British Embassy on 6 May at the same time of Berlin Design Week (4 – 10 May 2020). The one-day fair is being organised by the British Contract Furnishing Association (BCFA), and members of the association will have the opportunity to display their products in the atrium of the post-modern embassy building.  

At the exhibition, specially invited interior designers and furnishers, along with purchasers from the contract market, will be able to find out more about the collections and products of high-end British manufacturers and textile houses, and attend interesting talks by two top specialists of the sector.

Trevira will be showing a selection of Trevira CS fabrics which were on display earlier this year at the Heimtextil 2020, where they featured in the special exhibition ‘Textile Future by Trevira CS’. These fabrics are permanently flame retardant and can be deployed in a wide range of applications, as Berlin design company studio aisslinger impressively showed in the exhibition at the Trevira stand. For the Heimtextil fair, the prestigious studio aisslinger design team worked together with Trevira, creating a concept that revealed just how attractive and playful Trevira CS fabrics can be in a variety of settings on the contract market, including hospitality, healthcare, workspaces, public spaces and transport.

Designers and architects who are interested in taking part in the event are welcome to register their details with Trevira.

 

More information:
Trevira BCFA
Source:

Trevira

EuroShop 2020: High Degree of Internationality Photo: Messe Düsseldorf / ctillmann
EuroShop 2020: High Degree of Internationality
20.02.2020

EuroShop 2020: High Degree of Internationality confirms Global Leading Function for Retail

Retailers invest in emotionalisation and digitalisation +++ Top theme: linking online with offline shopping +++ Focus on sustainability +++ Accompanying Stages and Specials received very well

The World’s No.1 Retail Trade Fair, EuroShop 2020, drew to a close on Thursday (20 February 2020) after five successful days in Düsseldorf: 2,300 exhibitors from 57 nations reported of very good leads and concluded business deals. Furthermore, lively follow-up business is expected. 94,000 visitors travelled to the Rhine to gather information on the line-up of products, trends and concepts for retailers and their partners featured in 16 exhibition halls.  

“We are delighted that EuroShop once again successfully proved to be the most relevant platform for the global retail community when it comes to trends, inspirations and networking. Our exhibitors deserve the highest praise for their loyalty. With their innovative power they again proved the major attraction for an entire industry,” said Erhard Wienkamp, Managing Director at Messe Düsseldorf, voicing his great satisfaction with EuroShop 2020 results.

Retailers invest in emotionalisation and digitalisation +++ Top theme: linking online with offline shopping +++ Focus on sustainability +++ Accompanying Stages and Specials received very well

The World’s No.1 Retail Trade Fair, EuroShop 2020, drew to a close on Thursday (20 February 2020) after five successful days in Düsseldorf: 2,300 exhibitors from 57 nations reported of very good leads and concluded business deals. Furthermore, lively follow-up business is expected. 94,000 visitors travelled to the Rhine to gather information on the line-up of products, trends and concepts for retailers and their partners featured in 16 exhibition halls.  

“We are delighted that EuroShop once again successfully proved to be the most relevant platform for the global retail community when it comes to trends, inspirations and networking. Our exhibitors deserve the highest praise for their loyalty. With their innovative power they again proved the major attraction for an entire industry,” said Erhard Wienkamp, Managing Director at Messe Düsseldorf, voicing his great satisfaction with EuroShop 2020 results.

Exhibitors especially applauded the high international attendance at EuroShop. 70% of the EuroShop audience travelled to Düsseldorf from abroad. Large delegations came for example from Brazil, Australia and New Zealand. Trade visitors from a total of 142 countries attended EuroShop 2020.

“This high level of international interest clearly documents the dynamism of the global retail world and the exceptional position EuroShop enjoys as its economic engine,” said Michael Gerling, Chairman of the EuroShop Advisory Board and CEO of the EHI Retail Institute Cologne.

“The success of eCommerce is a real encouragement for retailers: they have understood they have to give their shoppers good reasons beyond the ranges to enter their stores. This competition has taken retail as a whole to the next quality level. Investment is being made in shop fitting so as to create customer journeys,” explains Gerling who adds: “Beyond this, retail digitalisation is booming. It enables retailers to offer their shoppers even more services and link online and offline channels, on the one hand, while simplifying process flows, logistics and lots more, on the other.” At EuroShop 2020 digital transformation was therefore a key focus, also in terms of achieving the highest energy efficiency and sustainability possible.

Exhibitors underlined the high level of expertise among visitors at the event, especially their pronounced decision-making powers, because 70% of the trade fair guests were in international top management. Many of them also used their visit to EuroShop to learn about best practice cases and forward-looking trends in retail at the in total eight Stages. The varied programme of lectures held on the individual Stages on such topics as Retail Technology, Architecture and Store Design or Expo & Event was well attended across the board. Meeting with the same high level of approval were the numerous Specials at EuroShop, including the Start-up Hub, the Designer Village and Premium City.

Numbers speak for themselves here: 96% of trade fair visitors were satisfied with their visit to the trade fair. Just as many confirmed the outstanding position of EuroShop as a trend barometer, networking platform and largest event for the retail sectors.

Due to the current situation associated with the Coronavirus 19.000 visitors less attended this time than at the record event 2017.

The next EuroShop will be held in Düsseldorf from 26 February to 2 March 2023.  

Asahi Kasei Adavnce at ISPO 2020 in Munich (c) AKA
Asahi Kasei Adavnce at ISPO 2020 in Munich
18.02.2020

Asahi Kasei Advance presents ECOSENSOR™ at ISPO 2020

At ISPO, AKA – Asahi Kasei Advance keeps the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

Such goals were scored thanks to the renown expertise of Research & Development and energized by constantly and strictly controlled processes that aim to save energy, water and Green House gases emissions. The result is a high-performative collection combining maximum comfort with durability and stretch-ability.

At ISPO, AKA – Asahi Kasei Advance keeps the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

Such goals were scored thanks to the renown expertise of Research & Development and energized by constantly and strictly controlled processes that aim to save energy, water and Green House gases emissions. The result is a high-performative collection combining maximum comfort with durability and stretch-ability.

With ECOSENSOR™, Asahi Kasei Advance truly innovates at ISPO as the very first producers choosing the high-performance path with sustainable values. “Like a truly complete athlete, ECOSENSOR™ wins both during the sprint and all along its performance. It’s outstanding light & stretch features match durability.”

Indeed, the flexible and multitasking range is the high-tech solution for sportwear, outerwear and beyond. The collection embraces the casual and sporty mood of active urban surfers as well as that easy-to-wear attitude for a relaxing free-time at home.

Excellent stretch and high-performative features match the adventurous temperament of extreme explorers, while durability and resistance are the key features to weave fabrics for outdoor activities. The target of ECOSENSOR™ by Asahi Kasei is to push at maximum the choice towards bluesign® approved and Standard 100 by OEKO-TEX® certified ingredients and production processes, and GRS (Global Recycled Standard) for recycled ingredients, showing the path to sustainability.

Working with the best like-minded apparel partners, AKA has achieved unsurpassed active climate control materials. The unique high-tech and low-impact functionality has been designed to make a real, sustainable difference a better future.

More information:
Asahi Kasei ISPO Munich 2020
Source:

GB Network

Sicomin Launches New Bio Systems at JEC World 2020. (c) Sicomin
Sicomin Launches New Bio Systems at JEC World 2020.
17.02.2020

Sicomin Launches New Bio Systems at JEC World 2020.

Sicomin continues to assert itself as the leading formulator and supplier of high-performance, bio-based epoxy resin systems with the launch of new bioresins at JEC World 2020, Hall 6, Booth 43. The group will unveil a variety of products that are each available in industrial quantities for series production within Automotive, Wind Energy and Civil Engineering.

Sicomin continues to assert itself as the leading formulator and supplier of high-performance, bio-based epoxy resin systems with the launch of new bioresins at JEC World 2020, Hall 6, Booth 43. The group will unveil a variety of products that are each available in industrial quantities for series production within Automotive, Wind Energy and Civil Engineering.

Bio Fire Retardant Epoxy Gelcoat for Wind Energy and Infrastructure
Sicomin will showcase SGi 128, an innovative intumescent epoxy gelcoat developed specifically for fire retardant coating applications for critical components found in the Wind Energy and Civil Engineering markets.
SGi 128 Gelcoat is produced with 38% of its carbon content derived from non-oil sources and is a halogen free gelcoat that provides outstanding fire protection for epoxy laminates and extremely low smoke toxicity. Available with both fast and slow hardeners, this easy to apply epoxy system forms a much tougher and waterproof part surface than traditional intumescent coatings. Sicomin’s SGi 128 is available in industrial volumes with short lead times and has been successfully tested to EN 13501 (EUROCLASS B-S1-d0) and ASTM E84 (Class A).

NEW Bio Resin for HP-RTM processing for Automotive
Sicomin’s new bio-resin specifically formulated for HP-RTM processing, SR GreenPoxy® 28, is the sixth product in Sicomin’s renowned GreenPoxy® range. SR GreenPoxy® 28 is a fast cycle, low toxicity, third generation bio-based formulation aimed specifically at the HP-RTM moulding processes used for both high performance Automotive structural parts and aesthetic carbon fibre components. The new formulation has been optimized for fast production cycle times and superior mechanical performance and is a more sustainable alternative to traditional resins providing exceptional performance and quality for high volume programmes.

GreenPoxy® InfuGreen 810 on display with the GREENBOATS Flax 27 Daysailer on the JEC Planets
With very low viscosity at room temperature, InfuGreen 810 has been formulated to support manufacturers seeking bio-based alternatives for producing parts using injection or infusion techniques. Produced with 38% plant-based carbon content, InfuGreen 810 holds the DNV GL certification, providing extra assurance of the product’s quality, efficiency and safety standards. This high-performance epoxy infusion system is demonstrated at JEC World through the display of the GREENBOATS Flax 27 daysailer on the JEC Planets.

More information:
JEC World Sicomin
Source:

100percentmarketing

PFAFF INDUSTRIAL auf der Messe SIMAC Tanning Tech (c) PFAFF Industrial
PFAFF INDUSTRIAL auf der Messe SIMAC Tanning Tech
13.02.2020

PFAFF INDUSTRIAL at SIMAC Tanning Tech

At this year’s trade fair „SIMAC Tanning Tech“, PFAFF Industrial, together with DÜRKOPP ADLER and the regional agency DAP ITALIA, will present the latest solutions for shoe and leather processing. The fair will take place in Milan from 19th to 21st of February 2020. The joint booth is located in Hall 14, No. C09.

PFAFF News and Highlights:

PFAFF 3806
New integrated workplace for closing rub-down seams, such as heel-, front- and side seams on street shoes, slippers and leg boots. The PFAFF 3806 is equipped with two-thread chainstitch high-speed seamer head PFAFF 5487 with drop feed and variable top feed, high lift and adjustable top feed pressure, which ensures consistently high quality. Reinforcing tapes, which may be applied from top impart greater durability to the seams and prevent fine leathers from being pulled out of shape. Automatic control sequences (via parameter or photocell) reduce the manual handling and increase the process reliability and output.

At this year’s trade fair „SIMAC Tanning Tech“, PFAFF Industrial, together with DÜRKOPP ADLER and the regional agency DAP ITALIA, will present the latest solutions for shoe and leather processing. The fair will take place in Milan from 19th to 21st of February 2020. The joint booth is located in Hall 14, No. C09.

PFAFF News and Highlights:

PFAFF 3806
New integrated workplace for closing rub-down seams, such as heel-, front- and side seams on street shoes, slippers and leg boots. The PFAFF 3806 is equipped with two-thread chainstitch high-speed seamer head PFAFF 5487 with drop feed and variable top feed, high lift and adjustable top feed pressure, which ensures consistently high quality. Reinforcing tapes, which may be applied from top impart greater durability to the seams and prevent fine leathers from being pulled out of shape. Automatic control sequences (via parameter or photocell) reduce the manual handling and increase the process reliability and output.

PFAFF 1591
On the fair PFAFF INDUSTRIAL will show its electronic single-needle shoe post-bed machine with touch-control panel, new thread trimmer for short thread ends (< 5 mm) and new programmable thread tension. The key benefit of “programmable thread tension” is that suitable thread tensions can be applied for different material thicknesses and/or for different seam sequences (as these can be programmed on electronic machines). The tensions can be accessed and/or set via a knee switch or stitch counting. Manual setting of the thread tension, as is common with current shoe machines, is no longer necessary with the programmed thread tension.

PFAFF 8303i
The ot-air taping machine for welding continuous seams on water-resistant, waterproof and breathable materials will be exhibited as “shoe version” with very small/slim post from back. Effortlessly shoe uppers with small radii can be taped. The slim post and the differential feed (via two separate drive motors for the top and bottom feed roller) ensures absolute neat seams and a requested fullness und shaped parts.
 

Ecosensor Logo (c) GB Network
Ecosensor Logo
11.02.2020

Asahi Kasei Advance champions sustainability at ISPO 2020 with ECOSENSOR ™

A true New Eco High-Tech Force of Nature

At ISPO, AKA – Asahi Kasei Advance keept the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

With ECOSENSOR™, Asahi Kasei Advance truly innovates at ISPO as the very first producers choosing the high-performance path with sustainable values.

A true New Eco High-Tech Force of Nature

At ISPO, AKA – Asahi Kasei Advance keept the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

With ECOSENSOR™, Asahi Kasei Advance truly innovates at ISPO as the very first producers choosing the high-performance path with sustainable values.

Indeed, the flexible and multitasking range is the high-tech solution for sportwear, outerwear and beyond. The collection embraces the casual and sporty mood of active urban surfers as well as that easy-to-wear attitude for a relaxing free-time at home.

 

More information:
ISPO Munich ECOSENSOR
Source:

GB Network

Bemberg Logo (c) GB Network
Bemberg Logo
11.02.2020

Bemberg™ debuts a full range of smart fabric collaborations

Empowering sportwear and athleisurewear with a sustainable imprint

Bemberg™ products including its now-iconic cupro fiber are made from a cotton linter pre consumer material, a natural derived source, and a truly unique one in the smart fiber arena that doesn’t deplete forestry resources.

In Munich, the company is pleased to announce its ultimate collaborations with Sidonios Malhas, SA. They have created Jacquard jersey with a very interesting look and graceful touch for the athleisure solutions.

Matias & Araujo which has developed, using ZUE’s Bemberg™/Polyamide intermingle yarn, a unique beautiful touch and physical property that suit the athleisure markets; and leading manufacturer of smart jersey TINTEX Textiles created a delicate and luxurious 100% Bemberg™ interlock with silky touch guaranteed by Plummy Technology®, GOTS certified light, fluid and soft Jersey that combine Bemberg™ with organic cotton enriched by the Naturally Clean® technology.

Bemberg™ also presents unique fabrics made in Japan with a special technology of combined yarn through texturizing process and blended yarn.

Empowering sportwear and athleisurewear with a sustainable imprint

Bemberg™ products including its now-iconic cupro fiber are made from a cotton linter pre consumer material, a natural derived source, and a truly unique one in the smart fiber arena that doesn’t deplete forestry resources.

In Munich, the company is pleased to announce its ultimate collaborations with Sidonios Malhas, SA. They have created Jacquard jersey with a very interesting look and graceful touch for the athleisure solutions.

Matias & Araujo which has developed, using ZUE’s Bemberg™/Polyamide intermingle yarn, a unique beautiful touch and physical property that suit the athleisure markets; and leading manufacturer of smart jersey TINTEX Textiles created a delicate and luxurious 100% Bemberg™ interlock with silky touch guaranteed by Plummy Technology®, GOTS certified light, fluid and soft Jersey that combine Bemberg™ with organic cotton enriched by the Naturally Clean® technology.

Bemberg™ also presents unique fabrics made in Japan with a special technology of combined yarn through texturizing process and blended yarn.

Bemberg™ by leading materials manufacturer Asahi Kasei is the sole maker of one-of-a-kind, matchless, high-tech natural fibers with a unique touch and feel as well as unique performances such as moisture control and is antistatic.

Atop the exquisite and precious touch, Bemberg™ fabrics are imbued with circular economy - from its source, manufacture and end-of-life. It is all supported by the LCA study, signed by ICEA and validated by Paolo Masoni, confirming a new quality profile and standard with a more responsible and unique position today. Full GRS certification, Oeko-Tex 100, ISO 14001, & Eco-Mark. Bemberg™ also has a new Compostability Certification.

 

More information:
Bemberg™
Source:

GB Network