From the Sector

EuroShop, the World’s no.1 Retail Trade Fair, is a must-see fixture for the retail world. From 16 to 20 February it will bring together to the tune of 2,300 exhibitors from over 60 countries with 114,000 trade visitors expected from throughout the world in Düsseldorf. And it is not only an indispensable information platform, trend hotspot and network for retail professionals but it also intensely impacts many other areas and sectors, delivers innovative blue-prints and addresses urgent themes of relevance to the future such as digitalisation, robotics, sustainability or climate neutrality.

The Side Events at EuroShop 2020:
The USPs of EuroShop include not only the extensive ranges of its exhibitors from throughout the world but also the quality and cross-section of its unrivalled line-up of side events.

8 Stages – 600 Speakers – 500 Lectures
The centrepiece of EuroShop are a total of eight Stages. They are lecture and discussion forums with high-calibre speakers addressing the latest developments, innovative trends and best practices amidst the hustle and bustle of the trade fair and accessible for EuroShop visitors free of charge and without prior registration (simultaneously interpreted in German-English or in English only). Boasting a total of 600 speakers and well over 500 expert talks delivered over five trade fair days this accompanying programme offers each trade fair visitor invaluable and right-on-target value added. All Stages at a glance: Retail Technology Stage, Omnichannel Stage, Start-up Stage, Store Design Stage, Retail Designers Stage, Energy Management Stage, Retail Marketing Stage and Expo + Event Stage.

• Porcher Industries presents the future of quiet and clean mobility solutions with materials that offer high-performance thermal and acoustical insulation.

The 5th Edition of the Annual Automotive Exhaust Systems Summit, to be held in Dusseldorf on November 28th-29th, will see Porcher Industries showcase the market’s most complete range of high performance thermal and acoustical insulation products.

With a key strategic thrust targeting quiet and clean mobility by developing new insulation applications, Porcher Industries’ range of textiles meet the demands and requirements of the Automotive, Aerospace and other transport sectors by delivering unsurpassed levels of thermal and acoustical management.

On display the group will showcase its Techmat®, SilcoSoft® and ThermoShield® materials – all highly functional non-woven textiles that can be found in key areas of both the hot and cold ends of vehicle exhaust systems.

Produced from 100% non-respirable fibres, these binder free non-wovens are safe to handle and can be tailored to provide application specific thermal insulation and heat shields at temperatures ranging from 650˚C to 1150˚C (1200°F to 2100°F).

Porcher Industries is able to deliver its Techmat®, SilcoSoft® and ThermoShield® materials in a wide range of formats from roll goods, flat or formed shapes through to sub-assemblies and finished parts that combine metallic layers with their insulation materials.

Porcher Industries’ thermal and acoustical insulation solutions will also be on show in Dusseldorf: technical textiles that blend chemistry and fibre processing technology to produce a powerful range of non-woven and glass mat thermoplastics (GMT) materials that can be tailored to a customer’s specific acoustical and thermal insulation requirements.

In addition, Andreas Stoeferle, Technical Support Engineer, EMEA, Porcher Industries, will present a detailed view of the group’s expertise in high performance insulations, their global reach, products and delivery formats on the opening day of the conference.

“As one of the leading manufacturers of specialist technical textiles within the Automotive sector, we have responded to demand and placed significant development time and resource into developing our range of thermal and acoustical material solutions for Automotive and Aerospace.” commented Pierre-Yves Quéfélec, Global Aerospace & Automotive BU Head.

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation is pleased to invite you to meet us at DyStar’s Booth H11 of Hall C1, Performance Days at Munich from 13 to 14 November.

Bernhard Knoche, Global Head of Brand & Retailer Management said, “This is our second time at the event, and we are elated to have five of our new developments chosen by the Jury of PERFORMANCE FORUM to be displayed on the Wall Special. Learn and find out how DyStar’s products can help you shape a more sustainable manufacturing journey with us.”

Manufacturers, Brands and Retailers will see intangible benefits from the five winning concepts featured on the Wall Special, namely DyStar CADIRA® Reactive, DYCON® HF on TENOWA® 1, DYCON HF on TENOWA 12, DYCON HF on TEXLENE®, DYCON HF on CERAMICA® GREEN.

DyStar’s Cadira Reactive is a resource saving module which was first launched in 2016. The Cadira concept supports in reduction of water, waste, and energy consumption. And as another sustainable solution offering the DYCON HF series, being the most cost efficient and resource saving continuous process for cellulosics and blends with PES, PA and PU fibres.

The two-day trade fair for the functional fabrics industry highlights a wide range of solutions for Manufacturers, Brands and Retailers globally. At DyStar’s booth, we welcome you to discuss opportunities for collaborations that will help to make the industry cleaner.

• Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
• Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
• Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
• Free cash flow from continuing operations improved significantly in the first nine months
• Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
• Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
• Countermeasures initiated to improve earnings of CFM
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: ”The structural growth drivers remain intact in our strategically relevant markets. The countermeasures to improve earnings of CFM will be implemented consistently.”

In the third quarter 2019, the business units of SGL Carbon developed very differently. While Graphite Materials & Systems (GMS) showed better than expected results, Composites – Fibers & Materials (CFM) deteriorated compared to the two previous quarters. This is attributable to the weaker development in the market segments Textile Fibers and Industrial Applications. In total, sales revenue in the first nine months 2019 grew by approximately 6 percent to reach 832 million euros. Recurring Group EBIT after nine months reached approximately 54 million euros. Adjusted for a positive one-time effect in the prior year, this was comparable to the prior year level.

In its ad-hoc notification of October 25, 2019, the company revised its guidance for recurring EBIT of CFM downwards to a negative mid to high single digit million euro amount. On the Group level the company now expects a recurring EBIT at 45 to 50 million euros. Due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications in the business unit CFM a non-cash impairment charge in the amount of approximately 75 million euros was recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler were not affected by this impairment. In addition, the impairment charge of CFM led to a valuation allowance on deferred tax assets in the amount of 7.4 million euros. Against this background, SGL Carbon now expects a net result of approximately minus 100 million euros for fiscal year 2019.

Experts from the tire industry will meet again in 2020 for the annual Tire Technology Expo in Hanover, Germany. Saurer Twisting Solutions is looking forward to welcoming customers and visitors at Booth 4006 in Hall 6 from 25 to 27 February 2020 and to presenting the innovative CableCorder CC5. With a complete package of numerous innovations, the CC5 once again demonstrates its technological leadership and the associated customer benefits.

The Saurer CableCorder for the production of high-quality tire cord is a permanent fixture in the tire industry. The fifth generation of the CableCorder will appeal to customers with its numerous innovations. It provides Saurer's customers with decisive competitive advantages: they benefit from lower energy consumption, a smart spindle concept, modern quality monitoring, improved ergonomics, flexible automation solutions and the integration of the CableCorder into Senses, the Saurer mill management system.

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

The new generation of clamping crowns CROCOdoff and CROCOdoff Forte introduce genuine doffing without underwinding. The crowns work automatically depending on the spindle speed. The major advantages are significant reductions in maintenance costs. That is based on a lower ends down rate after doffing and minimized cleaning of the underwinding area.

Novibra’s goal is to bring beneficial and customized solutions to the customers helping them to keep their leading position in the market. Novibra is looking forward to discussing the new products that fulfil one of today’s biggest demands for energy savings and maintenance costs reduction.

Bräcker presents a new traveller with up to 50% longer lifetime and shorter running-in period. This is only one highlight out of the impressing product variety.
A novelty Bräcker shows at ShanghaiTex is the new CARBO traveller for ring spinning machines. It is specially designed for man-made fiber spinners. CARBO is a new coating technology which improves the sliding properties. This results in up to 50% longer lifetime and a shorter running-in period. Recommended applications next to man-made fibers are also their blends, core yarns and all yarn counts.

In addition, Bräcker exhibits its well-known portfolio of high-quality products which meets the continually rising demands on the textile market like higher speeds and productivity. The rings and travellers offer long service lives, lowest yarn breaks and no thermal damages when processing man-made fibers.

At ShanghaiTex SSM presents solutions for precision package winding and high package consistency and provides a wide range of renowned textile machines.

SSM enables yarn dyers to be successful – with the precision package winder PWX. Only a quick response to market trends in combination with high cost-efficiency enables customers to be competitive. The winder offers clear benefits to dye package winding and rewinding of filament and staple fiber yarns, with or without lubrication.

For the XENO-platform SSM presents the first and only self-regulating backpressure system in the world: preciforce™ for a guaranteed package consistency. Furthermore, the next generation of the blade winding powerblade™ will be introduced for the XENO-platform.

• Bangladesh’s biggest denim expo takes place 5-6 November
• The show runs concurrently with the Sustainable Apparel Forum Bangladesh
• From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

Chomarat Group’s composite reinforcements will be featured at the KraussMaffei stand during the next K Messe in Düsseldorf. Chomarat has created a glass reinforcement adapted to the mass production of automotive parts, helping to lighten leaf springs by 60% compared to metal.

Automotive: Producing 60% lighter leaf springs for car's underbody
The new leaf springs made of composites are 60% lighter than their pendants made of steel thanks to KraussMaffei process and the involvement of a network of partners, including Chomarat with G-PLY™ glass reinforcement. Their strength can be deliberately increased in sections where it is required and the corrosion resistance offers further added value.

“We created the fabrics, when Engenuity developed the component, Huntsman supplied the matrix system made of epoxy resin, Johns Manville supplied the glass fibers, Schmidt & Heinzmann manufactured the preforms, Alpex designed the RTM mold and Hufschmied (Bobingen, Germany) took charge of post-mold processing of the component by milling. KraussMaffei has taken over the project management for Hengrui and coordinates the project with the partners.” Francisco De Oliveira at Chomarat explains.