Browse all sections

From the Sector

Foto Kraig Biocraft Laboratories, Inc.

15.09.2026

Spinnenseide sucht den Maßstab

Kraig Biocraft Laboratories rückt seine rekombinante Spinnenseide gezielt in den Kontext von Mode und Performance-Textilien. Das Unternehmen nutzt gentechnisch veränderte Seidenraupen, die Spinnenseidenproteine direkt in der Seidenfaser erzeugen. Anders als Verfahren, bei denen Proteine zunächst fermentativ hergestellt und anschließend zu Fasern verarbeitet werden, soll damit vorhandene Infrastruktur der Seidenindustrie genutzt werden können.

Für die textile Industrie ist vor allem die Skalierungsfrage relevant. Kraig Labs verweist auf rund 3,2 Tonnen rekombinante Spinnenseidenkokons aus einem einzelnen Produktionszyklus. Damit verschiebt sich die Diskussion von Laborproben hin zu reproduzierbarer Produktion in industriell interessanter Größenordnung. Als mögliche Einsatzfelder nennt das Unternehmen Luxus- und Modetextilien, Performance Apparel sowie Schutzmaterialien.

Kraig Biocraft Laboratories rückt seine rekombinante Spinnenseide gezielt in den Kontext von Mode und Performance-Textilien. Das Unternehmen nutzt gentechnisch veränderte Seidenraupen, die Spinnenseidenproteine direkt in der Seidenfaser erzeugen. Anders als Verfahren, bei denen Proteine zunächst fermentativ hergestellt und anschließend zu Fasern verarbeitet werden, soll damit vorhandene Infrastruktur der Seidenindustrie genutzt werden können.

Für die textile Industrie ist vor allem die Skalierungsfrage relevant. Kraig Labs verweist auf rund 3,2 Tonnen rekombinante Spinnenseidenkokons aus einem einzelnen Produktionszyklus. Damit verschiebt sich die Diskussion von Laborproben hin zu reproduzierbarer Produktion in industriell interessanter Größenordnung. Als mögliche Einsatzfelder nennt das Unternehmen Luxus- und Modetextilien, Performance Apparel sowie Schutzmaterialien.

More information:
Kraig Biocraft Laboratories Spinnenseide Spinnenseiden-Technologie Biomaterialien Performance Textiles Seide

Source:

Kraig Biocraft Laboratories, Inc.

Ben Muller

(c) INDA Association of the Nonwoven Fabrics Industry

15.09.2026

INDA Hires Ben Muller as Executive Director

INDA, the Association of the Nonwoven Fabrics Industry, announced today that Ben Muller has joined the association as executive director. Mr. Muller brings more than 20 years of progressive leadership experience spanning nonprofit organizations, corporations and trade associations.

Most recently, Mr. Muller served on the senior executive team of the High Point Market Authority, where he led marketing, public relations and educational programming for one of the world’s largest trade shows. Previously, he held senior brand and marketing leadership positions with Hanesbrands and Kayser-Roth, gaining extensive experience in textile and apparel supply chains. He began his career serving mission-driven organizations, including the American Cancer Society and the National Multiple Sclerosis Society.

Tony Fragnito, INDA’s current president and CEO, will transition to an executive consultant role in January 2027 to support the leadership transition and focus on projects and initiatives designed to expand the reach and participation of the Global Nonwovens Alliance (GNA). His planned retirement will occur in December 2027.

INDA, the Association of the Nonwoven Fabrics Industry, announced today that Ben Muller has joined the association as executive director. Mr. Muller brings more than 20 years of progressive leadership experience spanning nonprofit organizations, corporations and trade associations.

Most recently, Mr. Muller served on the senior executive team of the High Point Market Authority, where he led marketing, public relations and educational programming for one of the world’s largest trade shows. Previously, he held senior brand and marketing leadership positions with Hanesbrands and Kayser-Roth, gaining extensive experience in textile and apparel supply chains. He began his career serving mission-driven organizations, including the American Cancer Society and the National Multiple Sclerosis Society.

Tony Fragnito, INDA’s current president and CEO, will transition to an executive consultant role in January 2027 to support the leadership transition and focus on projects and initiatives designed to expand the reach and participation of the Global Nonwovens Alliance (GNA). His planned retirement will occur in December 2027.

The creation of the executive director position follows the formation of the GNA by INDA and EDANA and represents the next step in the evolution of INDA’s staff leadership to support the alliance. Mr. Muller’s broad leadership experience, strategic marketing expertise and deep understanding of member and industry engagement will be valuable as he leads INDA’s strategic initiatives, oversees operations and represents the interests of the nonwovens industry across the Americas.

“I am honored to join INDA at such a pivotal moment for the industry,” said Mr. Muller. “The formation of the Global Nonwovens Alliance creates an exciting opportunity to strengthen collaboration and expand the value we provide to members. I look forward to listening to our members, learning from their expertise and ensuring INDA continues to be a strong advocate and resource for the industry throughout the Americas.”

“Tony has provided outstanding leadership to INDA during a transformational period for both the association and the global nonwovens industry,” said Mark A. Thornton, chair of the INDA Board of Directors and vice president, Baby Care, Fem Care and Family Care Quality Assurance, The Procter & Gamble Company. “The Board is deeply appreciative of his leadership, commitment to our members and role in helping establish the Global Nonwovens Alliance. As we look ahead, we are confident Ben brings the strategic thinking, industry experience and collaborative leadership needed to build on that strong foundation and guide INDA into its next chapter.”

“Ben’s appointment represents an important step in bringing the vision of the Global Nonwovens Alliance to life,” said Murat Dogru, CEO, GNA. “The strength of the Alliance will depend on combining a truly global perspective with strong regional leadership that understands the priorities of its members. I am very pleased to welcome him and look forward to working closely together as we build the next chapter of the Alliance.”

“Leading INDA has been one of the most rewarding experiences of my career, and I am grateful for the opportunity to work with such a dedicated staff, Board, and membership,” said Fragnito. “It has been a meaningful way to cap off my career, and I look forward to working closely with Ben to ensure a seamless transition of INDA’s business operations and member relationships. I am excited to support him as he helps lead INDA and a partner with Murat as he leads the Global Nonwovens Alliance.”

More information:
Association of the Nonwoven Fabrics Industry INDA CEO Ben Muller

Source:

INDA Association of the Nonwoven Fabrics Industry

Tacnera: Freudenberg’s innovative technology for silicone-coated secondary foam dressings.

© Freudenberg Performance Materials

Tacnera: Freudenberg’s innovative technology for silicone-coated secondary foam dressings.

14.09.2026

Wound care becomes more textile-integrated

Freudenberg Performance Materials and Foshan United Medical Technologies (UMT) will make their first joint appearance at the WUWHS congress in Kuala Lumpur since Freudenberg acquired the Chinese wound-care specialist at the end of July. The combined platform stretches from fibre and nonwoven technologies to finished advanced wound-care solutions.

UMT’s primary dressings include alginate, carboxymethylcellulose (CMC) and chitosan technologies. Alginate variants include silver-containing options for antimicrobial protection, while CMC is used for moisture management and gel formation. Chitosan brings haemostatic and bacteriostatic properties. UMT is also presenting a non-invasive wound-closure system.

Freudenberg Performance Materials and Foshan United Medical Technologies (UMT) will make their first joint appearance at the WUWHS congress in Kuala Lumpur since Freudenberg acquired the Chinese wound-care specialist at the end of July. The combined platform stretches from fibre and nonwoven technologies to finished advanced wound-care solutions.

UMT’s primary dressings include alginate, carboxymethylcellulose (CMC) and chitosan technologies. Alginate variants include silver-containing options for antimicrobial protection, while CMC is used for moisture management and gel formation. Chitosan brings haemostatic and bacteriostatic properties. UMT is also presenting a non-invasive wound-closure system.

Freudenberg complements these primary-care products with Tacnera®, its patented silicone-coated foam-dressing technology. A dual-silicone construction combines secure edge adhesion with a gentler wound-contact layer, while a wave-pattern coating is designed to improve flexibility and exudate management. The wider industrial story is vertical integration: UMT’s capabilities run from fibre production and functionalisation through nonwovens, packaging, sterilisation and regulatory approval.

More information:
Freudenberg Performance Materials UMT wound dressings nonwovens alginate chitosan MedTech Tacnera

Source:

Freudenberg Performance Materials Holding GmbH

Photo Richard Harnisch, IÖW

11.09.2026

Lusatia builds a regional fibre economy

A new German research project is exploring how Lusatia can build a regional natural-fibre economy as the former lignite region undergoes structural transformation. Over three years, IÖW and Zittau/Görlitz University of Applied Sciences will examine value chains based on flax, industrial hemp, fibre nettle, miscanthus and residues such as straw and municipal leaves.

The focus is explicitly on industrial applications rather than conventional apparel textiles. Potential outlets include natural-fibre-reinforced plastics, specialty papers, lightweight panels, composites, automotive components and new packaging materials. A regionally resolved material-flow model will map feedstock availability, processing routes, land-use conflicts and possible bottlenecks.

The project is relevant to technical textiles and composites because it treats raw-material availability and industrialisation as one system. Workshops with farmers, processors, manufacturers, municipalities and economic-development actors are intended to produce practical transformation pathways for a circular bioeconomy.

A new German research project is exploring how Lusatia can build a regional natural-fibre economy as the former lignite region undergoes structural transformation. Over three years, IÖW and Zittau/Görlitz University of Applied Sciences will examine value chains based on flax, industrial hemp, fibre nettle, miscanthus and residues such as straw and municipal leaves.

The focus is explicitly on industrial applications rather than conventional apparel textiles. Potential outlets include natural-fibre-reinforced plastics, specialty papers, lightweight panels, composites, automotive components and new packaging materials. A regionally resolved material-flow model will map feedstock availability, processing routes, land-use conflicts and possible bottlenecks.

The project is relevant to technical textiles and composites because it treats raw-material availability and industrialisation as one system. Workshops with farmers, processors, manufacturers, municipalities and economic-development actors are intended to produce practical transformation pathways for a circular bioeconomy.

More information:
LauTra natural fibres hemp flax Miscanthus Composites Automotive bioeconomy Lusatia

Source:

Institut für ökologische Wirtschaftsforschung (IÖW) / Hochschule Zittau/Görlitz

11.09.2026

Recycled polyester heads to New York

Indorama Ventures is supplying fabrics woven with deja™ recycled polyester yarn to Thai label KH Editions. Two looks and accessories from the ten-look Spring/Summer 2027 collection will be shown in New York on 15 September during New York Fashion Week.

The collaboration builds on Indorama Ventures’ RECO programme, launched in 2011 and expanded into RECO Collective in 2023. The initiative combines recycled materials and industry support with emerging designers, aiming to demonstrate that circular inputs can meet the quality and aesthetic requirements of internationally presented fashion.

For the wider value chain, the project is a useful example of material innovation being connected to design, brand building and market access rather than remaining a stand-alone recycling story. Commercial scaling will ultimately depend on consistent quality, available volumes and the ability of recycled yarns to work within established fabric and garment production.

Indorama Ventures is supplying fabrics woven with deja™ recycled polyester yarn to Thai label KH Editions. Two looks and accessories from the ten-look Spring/Summer 2027 collection will be shown in New York on 15 September during New York Fashion Week.

The collaboration builds on Indorama Ventures’ RECO programme, launched in 2011 and expanded into RECO Collective in 2023. The initiative combines recycled materials and industry support with emerging designers, aiming to demonstrate that circular inputs can meet the quality and aesthetic requirements of internationally presented fashion.

For the wider value chain, the project is a useful example of material innovation being connected to design, brand building and market access rather than remaining a stand-alone recycling story. Commercial scaling will ultimately depend on consistent quality, available volumes and the ability of recycled yarns to work within established fabric and garment production.

More information:
Indorama Ventures KH Editions deja recycled polyester RECO New York Fashion Week circular fashion

Source:

Indorama Ventures Public Company Limited

11.09.2026

Wool turns sunlight into clean water

Editorial relevance: Very high – a measurable functional-textile application combining natural fibre and surface engineering.
Cornell University researchers have demonstrated that polydopamine-dyed wool can serve as a low-cost, renewable material for solar-driven water purification. The approach uses interfacial solar vapor generation, concentrating solar heat at the water surface while a textile structure transports water and converts it into vapor.

The strongest configuration used ultrablack wool positioned vertically and illuminated from both sides. It produced 2.43 kilograms of water per square metre of fabric per hour, while polydopamine-only wool achieved 2.21 kilograms. Both rates were nearly twice those reported for conventional horizontal two-dimensional evaporation systems. The material also operated continuously for ten hours without salt accumulation.

Editorial relevance: Very high – a measurable functional-textile application combining natural fibre and surface engineering.
Cornell University researchers have demonstrated that polydopamine-dyed wool can serve as a low-cost, renewable material for solar-driven water purification. The approach uses interfacial solar vapor generation, concentrating solar heat at the water surface while a textile structure transports water and converts it into vapor.

The strongest configuration used ultrablack wool positioned vertically and illuminated from both sides. It produced 2.43 kilograms of water per square metre of fabric per hour, while polydopamine-only wool achieved 2.21 kilograms. Both rates were nearly twice those reported for conventional horizontal two-dimensional evaporation systems. The material also operated continuously for ten hours without salt accumulation.

The work is relevant to technical textiles because performance depends on fibre choice, dye chemistry, surface structure and textile geometry acting together. Salt levels in the collected water were below the World Health Organization drinking-water threshold. Future work will test rainwater and wastewater and improve water-collection designs.

More information:
Cornell University wool polydopamine ultrablack textiles desalination water purification solar vapor

Source:

Cornell University / Cornell Chronicle

A matrix for recycled-fiber quality

Graphic: (c) Uster Technologies AG

10.09.2026

A matrix for recycled-fiber quality

Uster Technologies has introduced a structured matrix for assessing mechanically recycled fibers. The approach is intended to help spinners deal with the wider variability of recycled feedstocks and relate measured fiber properties more directly to processing decisions and intended end uses.

Mechanically recycled cotton typically shows greater variation than virgin material because fiber length is reduced and input streams differ in origin and processing history. A consistent assessment framework can therefore support bale management, blending decisions and the adjustment of spinning parameters. Uster positions the Recycled Fiber Matrix as a practical bridge between increasing recycled-content targets and reliable quality control.

This matters for circularity at industrial scale. More recycling capacity alone does not guarantee usable yarn feedstock; recycled fibers also need to enter established production systems with predictable performance. Testing and data interpretation are becoming part of the infrastructure required to move textile-to-textile recycling from availability to repeatable production.

Uster Technologies has introduced a structured matrix for assessing mechanically recycled fibers. The approach is intended to help spinners deal with the wider variability of recycled feedstocks and relate measured fiber properties more directly to processing decisions and intended end uses.

Mechanically recycled cotton typically shows greater variation than virgin material because fiber length is reduced and input streams differ in origin and processing history. A consistent assessment framework can therefore support bale management, blending decisions and the adjustment of spinning parameters. Uster positions the Recycled Fiber Matrix as a practical bridge between increasing recycled-content targets and reliable quality control.

This matters for circularity at industrial scale. More recycling capacity alone does not guarantee usable yarn feedstock; recycled fibers also need to enter established production systems with predictable performance. Testing and data interpretation are becoming part of the infrastructure required to move textile-to-textile recycling from availability to repeatable production.

More information:
Uster Technologies AG Recycled Fiber Matrix mechanical recycling cotton fiber testing quality management spinning

Source:

Uster Technologies AG

Photo (c) PITAKA

PITAKA's Brand Event in Berlin: 'Signals in the Wind'

07.09.2026

PITAKA turns aramid fibre into a deliberately irregular woven surface

PITAKA has introduced a new weaving technique for aramid fibre at a brand event in Berlin. The company is best known for thin smartphone cases and accessories made with aramid. Its new “Trace Form” technique is intended to avoid a completely uniform programmed surface: selected fibres are allowed to drift from their prescribed path so that texture emerges from controlled irregularity.

The first application is the “Wind Over Wheat Trace Form Edition”, with a surface intended to evoke wind moving across a wheat field and offered in three finishes. PITAKA presents the method as an interaction between industrial precision, material response and human judgement. For textile and material developers, the notable point is that a high-performance fibre normally valued for strength and low weight is being used as the visible aesthetic element of the product itself.

PITAKA has introduced a new weaving technique for aramid fibre at a brand event in Berlin. The company is best known for thin smartphone cases and accessories made with aramid. Its new “Trace Form” technique is intended to avoid a completely uniform programmed surface: selected fibres are allowed to drift from their prescribed path so that texture emerges from controlled irregularity.

The first application is the “Wind Over Wheat Trace Form Edition”, with a surface intended to evoke wind moving across a wheat field and offered in three finishes. PITAKA presents the method as an interaction between industrial precision, material response and human judgement. For textile and material developers, the notable point is that a high-performance fibre normally valued for strength and low weight is being used as the visible aesthetic element of the product itself.

The release leaves important technical questions unanswered. It provides no fibre fineness, weave parameters, mechanical data or quantified performance difference versus earlier aramid constructions. It would therefore be misleading to describe the launch as a new performance class. What can be stated is that PITAKA is translating a deliberately variable woven structure into a commercial aramid product and broadening the interface between technical fibres, composite structures and lifestyle design.

The limited Trace Form edition is scheduled to launch on 17 September. For textile-industry coverage, the relevant angle is not the consumer-electronics accessory itself but the material strategy: technical fibres can acquire additional value through construction, surface appearance and tactile expression beyond their conventional performance role.

More information:
PITAKA aramid

Source:

PITAKA

The LYCRA Company Reimagines the Trade Show Experience at Intertextile

Photo via Lycra

31.08.2026

LYCRA: New fibre technologies for performance, stretch and renewable content

The LYCRA Company is presenting several fibre technologies in commercial apparel applications at Intertextile Shanghai. COOLMAX CloakFX for woven fabrics is designed to mask the appearance of sweat, improve wet and dry opacity and provide moisture management; the company says the fibre is made from 100% recycled PET and certified to the Global Recycled Standard. LYCRA FiT400 is being shown for knits and wovens, combining non-spandex mechanical stretch with cooling functionality. RENEWABLE LYCRA fibre contains 70% renewable content derived in part from field corn grown in the US Midwest. The technologies are presented in a 356-square-metre co-creation district with Asian textile partners, illustrating how ingredient-brand technologies are translated into workwear, denim, performance and everyday apparel.

The LYCRA Company is presenting several fibre technologies in commercial apparel applications at Intertextile Shanghai. COOLMAX CloakFX for woven fabrics is designed to mask the appearance of sweat, improve wet and dry opacity and provide moisture management; the company says the fibre is made from 100% recycled PET and certified to the Global Recycled Standard. LYCRA FiT400 is being shown for knits and wovens, combining non-spandex mechanical stretch with cooling functionality. RENEWABLE LYCRA fibre contains 70% renewable content derived in part from field corn grown in the US Midwest. The technologies are presented in a 356-square-metre co-creation district with Asian textile partners, illustrating how ingredient-brand technologies are translated into workwear, denim, performance and everyday apparel.

More information:
Lycra COOLMAX CloakFX LYCRA FiT400 Renewable LYCRA Intertextile Shanghai performance apparel recycled PET

Source:

The LYCRA Company

31.08.2026

Circ and Shenghong move textile-recycled polyester into commercial filament yarn production

US textile-to-textile recycler Circ has entered into a partnership with Shenghong Chemical Fiber New Material for the commercial production of polyester filament yarn using Circ’s recycled material. Shenghong will purchase Circ PET chip and manufacture recycled-content filament yarn at commercial scale. For Circ, the agreement expands access to one of China’s major fibre producers and creates an additional route to market for polyester recovered from textile waste. For brands and mills, the key point is that textile-to-textile feedstock is moving closer to established high-volume yarn manufacturing structures. The partnership also underlines that scaling chemical recycling depends not only on polymer recovery but on robust downstream relationships with fibre and yarn producers.

US textile-to-textile recycler Circ has entered into a partnership with Shenghong Chemical Fiber New Material for the commercial production of polyester filament yarn using Circ’s recycled material. Shenghong will purchase Circ PET chip and manufacture recycled-content filament yarn at commercial scale. For Circ, the agreement expands access to one of China’s major fibre producers and creates an additional route to market for polyester recovered from textile waste. For brands and mills, the key point is that textile-to-textile feedstock is moving closer to established high-volume yarn manufacturing structures. The partnership also underlines that scaling chemical recycling depends not only on polymer recovery but on robust downstream relationships with fibre and yarn producers.

More information:
textile-to-textile textile-to-textile recycling Circ recycled fibres China polyester PET

Source:

Circ

31.08.2026

Better Cotton and Avalo use AI to accelerate climate-resilient cotton breeding

The Better Cotton Initiative (BCI) has partnered with agricultural technology company Avalo to accelerate the breeding of more climate-resilient cotton. Avalo uses an AI-enabled platform to identify genetic traits relevant to locally adapted plants that require less water and fertiliser. According to BCI, the approach can shorten the time needed to develop new varieties, an increasingly important factor as heat, water scarcity and shifting rainfall patterns affect cotton-growing regions. Avalo has already worked with BCI to enrol a significant number of new producers for the 2026 season and has tested a digital platform for collecting and reporting programme data. The partnership therefore connects plant breeding, digital data management and the requirements of an international cotton standard.

The Better Cotton Initiative (BCI) has partnered with agricultural technology company Avalo to accelerate the breeding of more climate-resilient cotton. Avalo uses an AI-enabled platform to identify genetic traits relevant to locally adapted plants that require less water and fertiliser. According to BCI, the approach can shorten the time needed to develop new varieties, an increasingly important factor as heat, water scarcity and shifting rainfall patterns affect cotton-growing regions. Avalo has already worked with BCI to enrol a significant number of new producers for the 2026 season and has tested a digital platform for collecting and reporting programme data. The partnership therefore connects plant breeding, digital data management and the requirements of an international cotton standard.

More information:
Better Cotton Initiative Avalo cotton artificial intelligence

Source:

Better Cotton Initiative

Cinte Techtextil China

Photo: Messe Frankfurt

28.08.2026

Cinte Techtextil China 2026 to open next week

As Asia’s premier platform catering to the evolving needs in technical textiles and nonwovens, Cinte Techtextil China will open next week at the Shanghai New International Expo Centre, gathering over 300 exhibitors from 15 countries and regions. Across Halls W3 to W5, this edition will create chances for fast-growing sectors and emerging trends – such as Mobiltech, Medtech & Protech, Indutech and more. The curated zones, pavilions, and fringe programme are designed to better connect exhibitors with targeted buyers from across China, Asia-Pacific, and further afield. Meanwhile, the Association Village will gather international industry associations to foster even more global collaboration.

As a hub for global innovation, the fair will feature a strong contingent of international industry leaders in Hall W5’s Overseas Zone, including Andritz (China) Ltd, Groz-Beckert (Germany), A.Celli SPA (Italy), and Dilo (Germany), while others such as Picanol NV (Belgium) will showcase in Hall W4.

As Asia’s premier platform catering to the evolving needs in technical textiles and nonwovens, Cinte Techtextil China will open next week at the Shanghai New International Expo Centre, gathering over 300 exhibitors from 15 countries and regions. Across Halls W3 to W5, this edition will create chances for fast-growing sectors and emerging trends – such as Mobiltech, Medtech & Protech, Indutech and more. The curated zones, pavilions, and fringe programme are designed to better connect exhibitors with targeted buyers from across China, Asia-Pacific, and further afield. Meanwhile, the Association Village will gather international industry associations to foster even more global collaboration.

As a hub for global innovation, the fair will feature a strong contingent of international industry leaders in Hall W5’s Overseas Zone, including Andritz (China) Ltd, Groz-Beckert (Germany), A.Celli SPA (Italy), and Dilo (Germany), while others such as Picanol NV (Belgium) will showcase in Hall W4.

The sought-after European and German Zones will also be in Hall W5, featuring high-performance solutions from such markets. Key suppliers in the European Zone will include Monosuisse Group (Switzerland) and Comerio Ercole S.p.A (Italy), while the German Zone will include IBENA Textilwerke GmbH and Mahlo GmbH + Co KG. Nearby, the Textile Chemicals and Dyes Zone will return to offer advanced solutions for diverse technical applications.

A key highlight of Hall W5 is the Association Village, designed to showcase expertise, foster international trade networks and collaboration, as well as present the latest trends that shape the industry’s future. Key organisations anchoring this feature include the Asia International Hemp Federation (AIHF) (Thailand), UK Fashion and Textile Association (UKFT), Government of Tamil Nadu India, and Nonwoven Federation of India (NWFI).

Targeted solutions displayed across high-demand application areas
With the technical textiles and nonwovens markets evolving, exhibitors are presenting advances engineered for critical application areas across the show floor:

Mobiltech: highlighted suppliers include JR Ltd (Korea) and Eastex Industrial Science & Technology (China). Also on the domestic side, Tiandingfeng Holdings Co Ltd will showcase high-strength PET filament needle-punched nonwovens. The Mobiltech Zone, set to feature other key exhibitors, will also be in Hall W4.
Medtech: featuring first-time exhibitor NIPPON Paper Industries Co Ltd (Japan) with its Cu-TOP product – a functional material derived from wood pulp combined with copper technology. The Reifenhauser Group from Germany will also be in Hall W5, with Reifenhauser Reicofil presenting full nonwoven production lines, and Reifenhauser Enka Tecnica the service components that aid their longevity. Joining the lineup, Yixiang Health Technology Co Ltd and Zhejiang Kingsafe Hygiene Materials Technology Co Ltd will both showcase medical and hygiene nonwovens.
Protech: key Protech exhibitors include a new exhibitor Tepar Tekstil San Ve Tic A S (Turkiye), and Dawnsens New Materials (Xiamen) Co Ltd (China), both showcasing advanced safety materials.
Indutech: IMAE Industries Ltd (Japan) will make its debut at the fair. The company specialises in thermal insulation fibre products and supplies fine ceramics for heavy industry, automotive, iron and steel, chemical, power generation and more.

Other first-time international brands will include Care Holdings Pte Ltd (Singapore) and Texbond Nonwovens (India); while China’s innovation will be spotlighted with domestic pavilions in Hall W3 featuring medical and hygiene textiles and in Hall W4 featuring filtration and separation textiles. Exhibitors are set to be greeted by a wide range of industry visitors.

Before the fair, overseas visitor pre-registrations have risen notably compared to the same period last year. These include 139 VIP buyers from 27 countries and regions, such as Hyundai Motor Company and Sejong Healthcare (Korea), Meditec Japan Co Ltd (Japan), ALSICO (Belgium), Focus Industries Limited (Hong Kong), Freudenberg Performance Materials Service GmbH and MöllerWerke GmbH (Germany), seeking high-demand solutions across Mobiltech, Medtech and Protech, Indutech, and more. In addition, seven international buyer delegations, from industry hubs across Asia-Pacific and beyond, will add to the fair’s global business appeal.

Fringe events explore innovation, emerging markets, and automotive trends in Halls W4 and W5

Panel Discussion (Day 1 morning) (W5 E20): the discussion topic, Industrial Hemp Fibre – Building the Future of Sustainable Materials, will take Thailand as a successful example to explore the use of advanced hemp fibre materials through cross-sector innovation and international investment. Complemented by the AIHF display area (W5 B20), featuring the evolution of raw hemp stalks into modern bioplastics, composites, mobility components, lifestyle products and other engineered applications.
2026 Nonwovens Industry High-Quality Development Conference (Day 1 afternoon) (W4 D38): under the theme ‘Redefine the growth paradigm’, Ms Guimei Li, President of China Nonwovens & Industrial Textiles Association, will show China’s nonwovens development during the 15th Five-Year Plan. Guest speaker Mr Anshumali Jain, Vice President of the Nonwoven Federation of India, will discuss the situation and opportunities of India’s industrial ecosystem, while Mr Tony Fragnito, President of the Association of the Nonwoven Fabrics Industry, will explore the state of the US market.
Automotive textile panel (Day 2 afternoon) (W5 E20): titled “Defining the Future Cabin: Multi-functional Evolution of Nonwoven Materials in Automotive”, the panel will include automotive end users, Tier-1 automotive interior suppliers, and upstream nonwoven technology providers. The Mobiltech Display Area (W4 F25) will complement the panel, with exhibits from Groz-Beckert, AIHF, Care Holdings Pte Ltd, Swisstulle (Qingdao) Co Ltd, and more.

Other key events include a presentation on sustainability by UKFT and the Sustainability Tour by Mr Karl Borgschulze, Managing Director of Consulting Service Intl Ltd (both on Day 2 morning) (W5 E20); other guided tours led by industry experts (covering medical, protective, automotive, and tents & coverings); Technology Innovation and Product Development for Future Technical Textiles; Deeyeo Flushable Wipes Scientific Consensus Release and Industry High-Quality Development Dialogue; and a display zone dedicated to Industrial Textiles in the 15th Five-Year Plan.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

More information:
Mobiltech MedTech ProTech Indutech Cinte Techtextil China Messe Frankfurt Shanghai

Source:

Messe Frankfurt

Valmet 3D Fiber technology combines high capacity and speed, automation, and resource efficiency to produce high-quality molded fiber packaging.

Photo by VALMET

Valmet 3D Fiber technology combines high capacity and speed, automation, and resource efficiency to produce high-quality molded fiber packaging.

28.08.2026

Valmet and Metsä scale 3D fibre forming to commercial production

Metsä Group has selected Valmet to supply what the companies describe as the world’s first commercial-scale production line for Valmet’s 3D Fiber technology. The line will be installed in Äänekoski and is scheduled to start up in 2028, with a nominal capacity of more than 100 million three-dimensional fibre products per year.

The process converts cellulose fibres directly into lightweight yet rigid end products. Valmet combines fibre processing, forming, automation and final packing in an integrated production chain. The technology has been co-developed with Metsä Spring since 2020 and was initially validated in a demonstration plant.

Although packaging is the primary target market, the development is relevant to the textile and fibre sector because it demonstrates how fibre-based structures and forming technologies are moving into three-dimensional industrial applications.

Metsä Group has selected Valmet to supply what the companies describe as the world’s first commercial-scale production line for Valmet’s 3D Fiber technology. The line will be installed in Äänekoski and is scheduled to start up in 2028, with a nominal capacity of more than 100 million three-dimensional fibre products per year.

The process converts cellulose fibres directly into lightweight yet rigid end products. Valmet combines fibre processing, forming, automation and final packing in an integrated production chain. The technology has been co-developed with Metsä Spring since 2020 and was initially validated in a demonstration plant.

Although packaging is the primary target market, the development is relevant to the textile and fibre sector because it demonstrates how fibre-based structures and forming technologies are moving into three-dimensional industrial applications.

More information:
Metsä Group Valmet 3D fiber technology packaging

Source:

VALMET

Dyneema SK80 fiber

Photo (c) Avient Corporation

Dyneema SK80 fiber

28.08.2026

Dyneema SK80 targets significantly longer service life for mooring lines

Avient is introducing Dyneema SK80, a new HMPE fibre grade for mooring lines and offshore applications. According to the company, the fibre was engineered at polymer level to deliver at least twice the durability and fatigue resistance of Dyneema SK78 in demanding mooring applications.

The technological emphasis is therefore less on headline tensile strength than on service life under cyclic loading. In mooring systems, repeated load cycles, abrasion, bending stress and environmental exposure are major failure drivers. Improved fatigue resistance can therefore have a direct effect on maintenance intervals, operational safety and lifecycle costs.

The new fibre will be presented at SMM in Hamburg in early September. For Textination, the development is relevant because high-performance fibres are increasingly being positioned not only through weight and strength advantages, but through durability, reliability and the total cost of technical textile systems.

Avient is introducing Dyneema SK80, a new HMPE fibre grade for mooring lines and offshore applications. According to the company, the fibre was engineered at polymer level to deliver at least twice the durability and fatigue resistance of Dyneema SK78 in demanding mooring applications.

The technological emphasis is therefore less on headline tensile strength than on service life under cyclic loading. In mooring systems, repeated load cycles, abrasion, bending stress and environmental exposure are major failure drivers. Improved fatigue resistance can therefore have a direct effect on maintenance intervals, operational safety and lifecycle costs.

The new fibre will be presented at SMM in Hamburg in early September. For Textination, the development is relevant because high-performance fibres are increasingly being positioned not only through weight and strength advantages, but through durability, reliability and the total cost of technical textile systems.

More information:
Avient Corporation polymer DSM Dyneema High-Performance Fibres Marine Applications

Source:

Avient Corporation

EDANA’s OUTLOOK™ returns to Cascais to shape a changing industry

Graphic by Edana

20.08.2026

EDANA’s OUTLOOK™ returns to Cascais to shape a changing industry

The market does not wait, and it does not grant easy answers. Across the absorbent hygiene, personal care, and wipes sectors, business is undergoing a period of intense, necessary adjustment. New European rules on packaging, single-use items, product safety, and end-of-life are forcing companies to drop old assumptions about materials and performance. At the same time, producers must keep their goods safe, reliable, and affordable for the babies and aging adults, who rely on them every day.

From 22 to 24 September 2026, EDANA’s OUTLOOK™ returns to the Hotel Miragem in Cascais, Portugal, for its twenty-fifth edition of the conference.

OUTLOOK™ began in Monaco in 2001. It focused then on baby diapers and menstrual protection. Over a quarter of a century, the work expanded. It grew to cover adult incontinence, wipes, complex international product safety, and strict environmental compliance. In 2007, the conference met in Cascais. Returning to the Portuguese coast this September marks a milestone, but the focus remains squarely on the work ahead.

The three-day programme takes on the hardest questions in the supply chain directly:

The market does not wait, and it does not grant easy answers. Across the absorbent hygiene, personal care, and wipes sectors, business is undergoing a period of intense, necessary adjustment. New European rules on packaging, single-use items, product safety, and end-of-life are forcing companies to drop old assumptions about materials and performance. At the same time, producers must keep their goods safe, reliable, and affordable for the babies and aging adults, who rely on them every day.

From 22 to 24 September 2026, EDANA’s OUTLOOK™ returns to the Hotel Miragem in Cascais, Portugal, for its twenty-fifth edition of the conference.

OUTLOOK™ began in Monaco in 2001. It focused then on baby diapers and menstrual protection. Over a quarter of a century, the work expanded. It grew to cover adult incontinence, wipes, complex international product safety, and strict environmental compliance. In 2007, the conference met in Cascais. Returning to the Portuguese coast this September marks a milestone, but the focus remains squarely on the work ahead.

The three-day programme takes on the hardest questions in the supply chain directly:

Day 1 Keynote — Global Macroeconomics & Shocks: Henry Curr, Economics Editor at The Economist, will open the plenary with his keynote presentation, "The Teflon world economy and what could finally break it." Curr oversees global economics coverage for The Economist and has written some 30 cover stories on labour markets, public debt, the future of global commerce, and the risks of "homeland economics" and green protectionism. Drawing on discussions with top policymakers and executives, he will explore how global markets have absorbed successive crises—from geopolitical conflicts to AI-driven labour disruption—and what structural risks could still disrupt demand and capital investment.

Session 1 — Market Drivers in a Challenging Environment: Moderated by Jacques Prigneaux (Market Analysis & Economic Affairs Director, EDANA), this session examines the pivotal market drivers redefining the competitive landscape. Industry specialists Kaushik Mitra (Chemical Market Analytics by Dow Jones), Dr. Annika Trümpler (Schlegel und Partner), and Natalia Bezrebra (Euromonitor) will address shifting polyolefin supply, pricing downslides, post-crisis supply chains, and the strategic expansion of major Chinese hygiene manufacturers entering the European market.

Session 2 — Global Product Safety Compliance Panel: Moderated by Luminita Barbu (Regulatory Affairs Director, EDANA), this high-level panel addresses the complex matrix of international consumer product safety regulations, compliance standards, and policy trends. Featuring legal and regulatory authorities—including Claudio Mereu and Natalie Konings, Partners at Bird & Bird—the discussion will highlight the practical implications of international initiatives such as the UN Principles for Consumer Product Safety, alongside regulatory divergence and convergence across the EU, US, and China.

Day 2 Keynote — Future Retail Trends & Consumer Shifts: Renowned retail futurist Theresa Schleicher opens Day 2 with her keynote, "Next Growth: The Bigger Consumer Shifts on the Horizon." Widely regarded as one of Europe's leading retail futurists, Schleicher is a former Managing Director at Hirschen Group, an author of acclaimed retail trend studies, a retail start-up investor, and a strategic sparring partner for Germany's Federal Ministry for Economic Affairs and Energy, the Zukunftsinstitut, and global giants like Procter & Gamble, L'Oréal, and Beiersdorf. Her session will uncover macro consumer trends, economic resilience, and emerging opportunities in absorbent hygiene.

Session 3 — The Consumer Lens: Redefining Value in Absorbent Hygiene: Moderated by Murat Dogru, this senior leadership panel puts the consumer perspective at the centre of innovation. Featuring senior leaders including Sara Järup (Global Material Development Director at Essity), Matrice Jackson (Director, Global R&D at Kimberly-Clark Corporation), and Giulia Antonioli (Head of Communications, Reputation & Public Affairs, Baby Care Europe at Procter & Gamble), the panel examines how consumer expectations around sustainability, dignity, and transparency are redefining value across femcare, adult incontinence, and baby care.

Session 4 — The Transition in Wipes & Interactive Q&A: Focusing on "Wipes: The Pros and Cons of Going Plastic-Free," this session brings together technical and public affairs experts—including Brieuc Lits (EDANA), Wolfgang Tenbusch (Albaad Deutschland), Sergio Rosales Calderon and Sebastien Monges (BCNonwovens), and Elisabeth Swennenhuis (Magnera Corporation)—to evaluate EU policy tools (SUPD, EMPCO, EPR schemes), Total Cost of Ownership (TCO), and the performance trade-offs of pulp versus viscose spunlace. The session concludes with a dedicated live Q&A and open floor discussion with the audience.

Session 5 — Can Absorbent Hygiene Products Become Circular? Led by EDANA’s Sustainability Director, Rawaa Ammar, this forward-looking session explores actionable circularity for the nonwovens sector. Featuring insights from Jeff Stubbe, CEO of Woosh, the session shares real-world operational lessons on closing the diaper loop and demonstrating that circularity can operate as an economically viable business model rather than a small-scale trial.

Exhibition, Business Meetings & Networking
Beyond the conference hall, OUTLOOK™ 2026 provides extensive commercial and networking platforms:

Tabletop Exhibition: A dedicated showcase featuring 20 innovative companies presenting advanced technologies, materials, and services.

Private Meeting Rooms: Dedicated business spaces designed for private discussions and commercial partnerships.

Evening Social Programme: Delegates will connect during the welcome cocktail at Hotel Miragem and an evening reception at the historic Valverde Sintra Palácio, set in the scenic hills of Sintra.

OUTLOOK™ 2026 is built for decision-makers. Alongside the plenary sessions, the event hosts a curated tabletop exhibition of 20 innovators, dedicated private meeting rooms for commercial discussions, and structured networking. Delegates will also gather for an evening reception at the historic Valverde Sintra Palácio in the Sintra hills.

More than 500 senior leaders across the value chain—raw material suppliers, machine builders, converters, brand owners, and retailers—will attend. You can track industry shifts from behind a desk, but you cannot replace being present when the sector evaluates itself and decides its course.

More information:
OUTLOOK™ Edana Product Safety Portugal Absorbent Hygiene

Source:

Edana