From the Sector

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

• Contracts for additional projects signed in Cairo
• Order volume is around 30 million Swiss francs
• Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

• First glass fiber based leaf spring project in series by Ford worldwide
• From development to serial production

Since midyear, SGL Carbon has produced longitudinal leaf springs made of glass fiber-based composite for Ford Transit rear axles in series. The springs are used in combination with the Transit Skeleton chassis. Thus, they are applied where high payloads play an important role, for example in caravanning models or specific commercial vehicle variants of the Transit. In comparison to conventional leaf springs, the innovative composite leaf spring weighs about 50 percent less while offering increased security standards. The serial application is supported by a one-to-one compatibility with standard steel springs.

Experts from the tire industry will meet again in 2020 for the annual Tire Technology Expo in Hanover, Germany. Saurer Twisting Solutions is looking forward to welcoming customers and visitors at Booth 4006 in Hall 6 from 25 to 27 February 2020 and to presenting the innovative CableCorder CC5. With a complete package of numerous innovations, the CC5 once again demonstrates its technological leadership and the associated customer benefits.

The Saurer CableCorder for the production of high-quality tire cord is a permanent fixture in the tire industry. The fifth generation of the CableCorder will appeal to customers with its numerous innovations. It provides Saurer's customers with decisive competitive advantages: they benefit from lower energy consumption, a smart spindle concept, modern quality monitoring, improved ergonomics, flexible automation solutions and the integration of the CableCorder into Senses, the Saurer mill management system.

Shanghai - ROICA™ lands in Shanghai to showcase its complete range of premium stretch fibers for the modern wardrobe and disclose its visionary approach and strategy for a cutting-edge and sustainable fashion.

On show, leading material innovator Asahi Kasei introduces a premium stretch fiber starting from the ultimate ROICA Eco-Smart™ Family. The certified and multi-awarded range has astonished the textile world for its hyper-performative features. “The new premium stretch is synonymous of transformation: from standard to speciality, from basic to special, from ordinary to clever and from standard to Smart.” Explains Shinichiro Haga, Senior Executive Manager - ROICA™ Division.

Sustainability and a responsible approach are the true core of research and development to create high-tech engineered yarns.Such visionary imprint imbues all ROICA™ innovations:

• ROICA Eco-Smart™ family: A true world-first with the most contemporary sustainable range of responsibly produced premium ingredients. ROICA Eco-Smart™ family offers 2 sustainably designed stretch yarns

- ROICA™ EF is GRS by Textile Exchange certified, thanks to the fact that more than 50% of yarn content comes from the recycling of pre-consumer waste.
- ROICA™ V550 yarn got the Cradle-to-Cradle® Innovation Institute’s GOLD LEVEL Material Health certificate for impacts on human and environmental health. This yarn is also Hohenstein Environment Compatibility Certificated, signifying at its end-of-life, ROICA ™ yarn smartly breaks down without releasing harmful materials.

• ROICA Feel Good™ family: A unique range of advanced stretch yarns that deliver personal performance and measurable wellness, freshness and comfort metrics for travel, sport, leisure and more.
   
• ROICA Colour Perfect™ family: A range of yarns that can give excellent, flawless and world unique colour dimensions in advanced fit solutions.
   
• ROICA Resistance™ family: A high performance range of stretch solutions with performance resistance designed for match particular applications.
   
• ROICA Contour™ family: A range of yarns that create new shaping, stretch and silhouette solutions for a calibrated fit, effortless control, softness, comfort and support.

ROICA™ already entered the most advanced collections of leading brands as: Wolford for exceptional European Skinwear including legwear, Sarah Borghi for hosiery, SITA Active for Smart pret-a-porter,  Daquini for athleisure, Livy for sensual lingerie, SCOTT Racing Team for cycling uniforms, Closed for denim, Un-Sanctioned for running suits, Vitamine A for beachwear and many others.

In Shanghai, ROICA™ is set to stand out as leader in Smart Innovation. As tangible proof of this, the company brings to Intertextile Shanghai some of its ultimate collaborations across China and the Far East.

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

With Alpha-Liner, Autoneum launches its first-ever textile wheelhouse outer liner that not only reduces tire noise substantially, but also convinces with low weight. This newest lightweight component ensures a quiet driving experience and also helps vehicle manufacturers meet current and future noise and emission limits. Alpha-Liner premieres at the “Automotive Acoustics Conference” which takes place in Zurich,
Switzerland, on July 9 and 10.

Alpha-Liner is the latest innovation from Autoneum – a multifunctional wheelhouse outer liner that reduces tire noise with high efficiency and thus makes the vehicle quieter and lighter. Alpha-Liner is based on Autoneum’s newly developed technology, with which noise absorption can be adapted to the specific requirements of the vehicle model for the first time. To achieve this effect, a thin coated surface is applied on the tire side. The porosity of the coating can then be controlled according to the necessary absorption properties, the bottom part of the wheelhouse outer liner requires stronger noise treatment, which maximizes acoustic absorption.

The last frontier of innovation in racing suits made with yarns in Metamicro is the model Prime SP-16+, designed in collaboration with the Team McLaren Honda F.1

The spinning mill Filidea, joint venture between Marchi & Fildi spa and Abalıoğlu Holding A.Ş specialized in technical and high performance yarns with natural and synthtic fibers, is parter of Sparco, italian Company leader for the production of automotive components and technical apparels for the most important world Championships. The cooperation between the two Companies located in Piedmont, northern Italy, is focused on the supply of yarns with Metamicro in an exclusive composition, that are used for the production of the racing suits Sparco of the Premium range for Formula 1 and the World Rally Championship. The fire resistant yarn Metamicro based on aramidic fibers are a product of the latest generation, for their production it is necessary a special spinning line. The production is following the strict Sparco standards. Sparco controls all the production chain of racing suits, from Filidea, who has the competence to dye all the yarns with aramidic fibers in its own dyeing plant, to the woven fabric, produced and dyed in its own plant, to the woven fabric made by the italian Company TAT, till the production of garments. The process is always improved and tested.

Metamicro yarns are made by an high peformance spinning process. They are used for the production of fire resistant fabrics, that make a protection barrier for the body against flames and high temperature. The very fine micronage allows the production of very light fabrics with thick texture, the perfect base for light and comfortable suits. These features assure easier movements to the driver and the maximum protection from fire, keeping high breathability.

Filidea has invested on its production capacity of corespun yarns with XLANCE® technology, fiber used for the production of longlasting workwear apparel with an excellent fitting.

The spinning mill Filidea, joint venture between Marchi & Fildi spa and Abalıoğlu Holding A.Ş specialize in technical and high performance yarns with natural and synthtic fibers, is increasing its production of blends with XLANCE®.

XLANCE® is the innovative elastolefin fibe, elastic, chlorine and UV resistant. It finds application on workwear and outdoor clothing, with natural and comfort fitting. The comfort stretch feature follows the the body’s natural movement during the day-to-day work. Workwear clothing are so light, resistant and with a contemporary look. Resistance to abrasion and to frequent industrial laundry cycles with chemical products meet the needs of several professional sectors. XLANCE® is produced by ©Xlance srl, Company located in Varallo Pombia (province of Novara – Piedmont – Italy) that found in Filidea the perfect partner for the development of specific yarns, that are getting more and more requested. An innovation that is getting more important thanks to the cooperation of the two textile Companies located in Piedmont. Filidea has been producing XLANCE® yarns since 2009 and has now a great know-how. The Company to strengthens its leadership in technical yarns, for the main applications on protetictive garments, workwear, sportswear, racing and automotive. Filidea has developed and consolidated several partnerships for the creation of complete supply chains and the collaboration with ©Xlance is a perfect example.

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

• 8^th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8^th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

CHOMARAT, the expert in composites reinforcements, is the partner of BABOLAT with its multiaxial carbon, C-PLY™ Hexagonal. Indeed, the specialist racket sports goods manufacturer is launching the new version of the BABOLAT’s Pure Aero. A combination of ultra-modern design and high performance, this tennis racket for champions has made an appearance on the courts of the Rolex Paris Masters. “We are very proud to be chosen by BABOLAT. Our new carbon reinforcement, added to the heart of the racket, enables better control and makes each shot more precise and stable,” says Pascal JOUBERT DES OUCHES, Sports Equipment Market Director at CHOMARAT.

C-PLYTM HEXAGONAL, THE PERFECT ALLIANCE OF PERFORMANCE & DESIGN
The addition of C-PLY™, CHOMARAT’s multiaxial carbon reinforcement, to the core of the BABOLAT’s Pure Aero has increased the racket’s stability while enhancing its performance. The specificity of the reinforcement lies in its stitching thread. “This unique thread brings out the color of the resin pigments because it has been designed to remain visible after its impregnation. It also contributes to extra reinforcement and an exceptional design!” concludes Pascal JOUBERT DES OUCHES.