From the Sector

To further advance the system, the Global Organic Textile Standard (GOTS) is significantly raising the requirements for GOTS-certified gins, to ensure transparent and traceable processing for organic textiles from field to finished product:

1. GOTS is introducing a compulsory farm-gin registry for all farms and farm groups whose certified raw material enters the GOTS system, including information on farm yields. The registry will be implemented progressively, starting in India.
2. Raw cotton is not allowed to travel more than 500 km from the farm to the certified gin. The shorter trade chain protects vulnerable points and optimises the process for buyers.  
3. Increase of unannounced audits of gins where there is a high perception of risk.

These new requirements are added to the numerous checks and balances which are already performed throughout every processing stage. Seed cotton entering the GOTS supply chain is tested for the presence of genetically modified organisms according to the applicable ISO protocol. GOTS-approved Certification Bodies (CBs) include further testing (such as pesticide residue) and are fully authorised to reject material that does not meet GOTS requirements. Additionally, before certification bodies issue a Transaction Certificate (TC), GOTS requires that a thorough assessment takes place, including a plausibility check in the form of volume reconciliation.

To strengthen integrity and traceability, GOTS also stipulates that the Farm TC number appears on the first GOTS TC at the ginning plant, which is the first step for cotton in the GOTS supply chain. The TC must state the origin for raw material, including region, state, and province. This effectively traces material back to the field and adds another layer of accountability to GOTS-certified fibre. It also supports all buyers in their purchasing decisions.

GOTS is not only improving its own system but also coordinating efforts with other key players to support the integrity of organic textiles. As GOTS provides certification of first processing stages to Textile Exchange's Organic Content Standard (OCS), GOTS and TE discussed new requirements for OCS while they were being developed. GOTS supports these requirements as they provide a dual protection shield for materials entering the GOTS or OCS supply chains, at the same time maintaining necessary data privacy. The new requirements will help increase traceability and transparency throughout the organic textile sector which are among the main objectives of GOTS. There are no changes necessary to the requirements of GOTS regarding any of the new OCS rules.

Inspired by this innate desire to experience nature and a shared vision, adidas TERREX has teamed up with fashion-forward Japanese outdoor label and wander on a collection that will take hikers from city centre to mountain top (and back again) in style.

Since its inception, adidas TERREX has focused on providing people with the clothing and apparel they need to realize their individual goals in the outdoors and enjoy the benefits of nature.

Tokyo designers Keita Ikeuchi and Mihoko Mori, meanwhile, launched their own outdoor label and wander in 2011 to bring more creativity to outdoors wear. By pairing high-fashion design with the practical requirements needed for adventure, theirs is a modern approach to apparel that works both in the wild, and on the streets.  

Together, adidas TERREX and and wander have collaborated on a multi-seasonal collection that ties these philosophies together to help people enjoy more outdoors experiences.

With a striking visual update, the lightweight TERREX Free Hiker 2 offers grip on a range of surfaces, and a responsive BOOST midsole that delivers incredible energy return. With a breathable upper and a sock-like fit that adapts to every step, this supportive shoe made in part with Parley Ocean Plastic is ready for adventure, anywhere.

With the TERREX Free Hiker 2 taking care of the feet, the TERREX XPLORIC and wander COLD.RDY Down Jacket is a functional essential with eye-catching design. COLD.RDY insulating material help keep the warmth in, while prominent TERREX x and wander reflective prints on the jacket and detachable hood help it stand out. With an array of pockets and adjustable features for the right fit, this versatile jacket’s natural habitat is everywhere. It’s also made in part with recycled materials.

adidas TERREX x and wander graphics and reflective detailing have been worked into the rest of an adventure-ready outdoor clothing collection that also includes a TERREX Fleece Jacket, loose-fit unisex TERREX Graphics Hoody and TERREX Pants.

Also available in the adidas TERREX x and wander collection are breathable Merino Wool Hiking Socks made with COLD.RDY technology for snug hiking , a quilted Winterized Bucket Hat, and a lightweight AERO.RDY Hiking Backpack that is loaded with features to look after outdoor essentials.

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The Dolinschek brothers moved their business to the historic site of the former Ambrosius Heim textile company in Burladingen in 2001 in order to expand. At the time, the company – founded by their father in 1980 as a textile wholesaler before moving into dyeing – employed just 13 people. Within a year, the company had bought additional space at the site.

Now, with Theo in charge of technology and sales, and Erwin responsible for production, the company employs almost 100 people and operates on an integrated site of 35,000 square metres.

In 2005, a laminating department was established by the company and since 2012 investment in knitting machines has been ongoing.

“The further we went into vertical integration, the more of our own products we were able to position on the market and so we were also able to make ourselves more independent,” says Theo. “We have continued to develop and today we can produce high-quality fabrics for many fields, with 42 knitting machines, 36 dyeing machines, three stenter frames and many other production and processing machines.”

Dolinschek has also developed its own proprietary TMG dyeing machines which have subsequently been successfully sold to many other companies all over the world. There are currently 11 of these machines  in operation at the Burladingen site and around 45 installed at other companies.

For finishing technology, however, the company relies on Monforts, and has installed a new seven chamber Montex TwinAir stenter range with a Montex®Coat coating unit in knife execution, enabling the coating of dimensionally stable knitted fabrics with polyurethane or acrylate. Another unique feature is the Teflon-coated (non-stick) transportation belt through the system.

The Montex line is also equipped with integrated heat recovery and exhaust gas purification to ensure the most resource-efficient processing available on the market. The exhaust air goes from the Monforts heat recovery system into an existing air/water heat recovery system and then into an electrostatic precipitator.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily.

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 
“We are not immune to the global market context in which we operate. The supply chain issues stemming from the Covid-19 pandemic are still wreaking havoc, and the ongoing war in Ukraine has dealt a heavy blow to the global utility, commodity, and financial markets – and to us. We are satisfied with the progress at the site of our planned commercial-scale factory and the opening of the factory remains our key priority. The current, unstable market environment has highlighted the need for us to also accelerate efforts to simultaneously pursue other avenues for scaling production, with the ultimate aim of serving our customers in the best possible way in the long run,” said Infinited Fiber Company CEO and cofounder Petri Alava.
 
Infinited Fiber Company said in June that it planned to build a factory to produce Infinna™, a textile fiber that can be created 100% from cotton-rich textile waste, at the site of a discontinued paper mill in Kemi, Finland. The factory is expected to create around 270 jobs in the area and to have an annual production capacity of 30,000 metric tons, equivalent to the fiber needed for about 100 million T-shirts. The future factory’s customer-base includes several of the world’s leading apparel companies, with most of the future production capacity already sold out for several years.
 
Since June, Infinited Fiber Company has advanced the site-specific basic engineering, recruitment planning, vendor selection, and permit processes according to plan. The limited component availability caused by the continuing impacts of the Covid-19 pandemic and the war in Ukraine have, however, prolonged significantly the delivery times for some of the key equipment and machinery needed for the factory. As a result of these developments, Infinited Fiber Company has re-evaluated its overall factory project timeline. The first commercial fiber deliveries from Kemi are now expected to begin in January 2026. The scope of the project remains unchanged and construction work at the site is expected begin during 2023 as previously communicated.
 
In addition, the European energy crisis sparked by the war in Ukraine has caused the electricity prices in Finland to roughly triple, and the prices of some of the key chemicals needed in the fiber regeneration process have risen by some 200-300% since the start of the war.
 
“We of course don’t have a crystal ball. But according to our advisors and other experts, utility and commodity prices are forecast to normalize before 2026, when we now expect the first commercial fiber deliveries from Kemi to be shipped. In addition to the likely normalization of the market, the extended timeline enables us to undertake the necessary measures to develop the profitability of the future factory. The growing demand for Infinna™, despite the general turbulence, is an encouraging and clear indication of the fashion industry’s commitment to circularity,” said Petri Alava.

As an accredited testing and certification body, the “OETI - Institut fuer Oekologie, Technik und Innovation GmbH“ (OETI for short) has been successfully responding to prevailing market requirements for 55 years and, in the process, has made a name for itself worldwide. To mark its anniversary, this international centre of excellence with its origins in Austria is taking a look back at the most important milestones in its history as well as providing interesting insights into future developments.

As renowned flooring manufacturers founded the Austrian Carpet Institute on 25th of September 1967, no one could have imagined how successful the company would become. But even back then, one thing was clear to the experts: the need to establish a carpet research and testing centre in the form of an association. Today, over five decades later, OETI is a testing and certification services provider for OEKO-TEX® certificates and labels, textiles, leather, due diligence along the textile and leather supply chain as well as for personal protective equipment (PPE), flooring technology, furnishings and indoor air quality.

In 1992, OETI was a founding member of the ‘International OEKO-TEX® Association for Research and Testing in the Field of Textile and Leather Ecology’ with independent certifications and product labels. Ever since, OEKO-TEX® has enabled companies along the textile and leather supply chain and every consumer to make responsible decisions for safe, environmentally friendly and fairly manufactured products.

In line with its focus on sustainability, OETI and its Swiss parent company, TESTEX AG, wanted to build the new OETI headquarters using low energy construction techniques and ensure its carbon-neutral operation. To achieve these goals, the highest possible thermal insulation and energy optimisation standards were applied, while the carbon-neutral power supply is generated by its in-house photovoltaics system as well as domestic renewable energy.

The new headquarters, which the company moved into in 2021, provides space for 75 employees over 2,500m2 and boasts bright and perfectly equipped office areas. The laboratory areas, the analytical/chemical laboratory and the physical / fire laboratory were also designed based on the latest methods and technologies. This makes OETI, alongside its Swiss parent company TESTEX, the second fully fledged laboratory site in the entire, global TESTEX Group.

Together with the Johann Jacob Rieter Foundation, the Rieter Group is supporting a new Endowed Professorship for Industrial Artificial Intelligence (AI) at the ZHAW School of Engineering. The Professorship is dedicated to teaching and research in the field of industrial applications of Artificial Intelligence and will be announced later this year.

The new Endowed Professorship will be established at the Center for Artificial Intelligence (CAI) of the ZHAW in Winterthur. It will focus, in particular, on the application of machine learning methods and knowledge-based systems in connection with processes in production and service.

For Rieter, the commitment is related to the implementation of its technology leadership strategy. The contribution of the Johann Jacob Rieter Foundation to sponsoring the Professorship is in line with the Winterthur Cluster Initiative. The increasing digitalization of production processes opens up new perspectives for Winterthur as a business location.

Building Expertise in the Field of Industrial AI
The Endowed Professorship will serve to build expertise in the field of Industrial AI and will oversee a group that will focus on teaching and research pertaining to trustworthy machine learning. This involves, for example, the deployment of artificial intelligence with the aim of optimizing production processes in relation to the use of raw materials and energy, and making expert knowledge more readily available.

In addition to research, for the purpose of knowledge transfer, the new professorship will also be active in teaching, in the bachelor's degree programs in Computer Science and in Data Science, in the Master of Science in Engineering, and in continuing education.

The annual commitment of CHF 300 000 over a period of six years will be financed equally by the Rieter Group and the Johann Jacob Rieter Foundation.
“The use of artificial intelligence in industry is becoming increasingly important, especially with regard to the potential of data for evaluation and control of complex processes. The support of the Johann Jacob Rieter Foundation and the Rieter Group will allow us to further expand AI research in the field of industrial applications,” explains Prof. Dr. Dirk Wilhelm, Director of the ZHAW School of Engineering.

“The use of Artificial Intelligence will make a significant contribution to automation and process optimization, and thereby advance sustainability in the textile industry. This makes it an important element of the leading technology that Rieter offers,” emphasizes Rieter CEO Dr. Norbert Klapper.

“The Smart Machines cluster is growing in importance,” says Thomas Anwander, member of the Foundation Board, and adds: “The Endowed Professorship for Industrial AI at the ZHAW aims to promote Winterthur as a technology location by pooling locally available strengths in mechanical engineering and Industry 4.0.”

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

Thanks to the ground-mounted photovoltaic system at the “Ofenloch” landfill site, Lenzing, in conjunction with VERBUND, is consistently moving forward on the path to a carbon-free energy supply and has commissioned the first half of the new photovoltaic system with a peak power of 2,780 kWp. Full commissioning of the system with a peak power of 5,560 kWp is envisaged in mid-October. Annual electricity production will amount to 6,000,000 kWh, which is expected to cut CO₂ emissions by some 4,400 tonnes per year. The Austrian pioneer in fiber production already commissioned three rooftop photovoltaic systems in spring/summer of 2022, with a peak power of 1,454 kWp and annual electricity production of some 1,508,000 kWh. The electricity flows directly into the company’s on-site production and will also power electric charging stations in future. In the first development stage, 16 wallboxes are set to be installed by the end of the year. A further 32 charging points are planned for 2023. The charging stations will be accessible to staff, visitors and the company’s own vehicle fleet.

“VERBUND’s photovoltaic operator model allows us to make the transition to solar power without incurring investment costs or risks. Thanks to the constant expansion in renewable energy, we remain on course to ecologize the value chain, while optimizing our carbon footprint, cutting costs and reducing the load on the grid, as we are using nearly 100 percent of photovoltaic power in our production,” explains Christian Skilich, Chief Pulp Officer of the Lenzing Group.

A huge logistics hub which is set to become AkzoNobel’s largest warehousing base in China is on course to be completed by the middle of 2023.

Located at the company’s decorative paints site in Songjiang, Shanghai, the new €10.3 million facility – a nerve center for production, storage and transport – will use intelligent digital technologies and advanced security management to customize storage and operation modes for different product categories.

“Eastern China is a strategically important region for us and the new facility will ensure that we’re well placed to meet the steady growth in demand which is expected over the next ten years,” says Mark Kwok, AkzoNobel’s President of China/North Asia and Business Director for Decorative Paints China/North Asia.

Equipped with a heat-insulating and light-permeable roof – along with nearly 5,000 solar panels that will generate 1.6 million kWh of electricity – the new facility will collect clean energy and use it for warehouse and office lighting, as well as charging forklifts.

The use of clean energy, logistics optimization and the automation of warehouse operations will make an important contribution to the company’s ambition of cutting carbon emissions by 50% and moving to 100% renewable electricity by 2030.

Earlier this year, AkzoNobel also announced that it was investing in a new production line for water-based texture paints in Songjiang. The new 2,500 square meter plant will boost capacity for producing Dulux products for various markets.

The new warehousing facility is scheduled for completion in May 2023.

• Partnership with green power producer Enery and Energie Steiermark realizes construction of a photovoltaic plant with 5.5 MWpeak capacity
• Strategic investments in renewables boost energy independence and reduce carbon footprint

The Lenzing Group has signed an electricity supply contract with green power producer Enery and Energie Steiermark to finance a photovoltaic plant in the Deutschlandsberg region (Styria). The electricity generated will supply the fiber and pulp plant at the Lenzing site after commissioning from the fourth quarter of 2023. The electricity supply contract is limited to 20 years.

The plant’s output will amount to 5.5 MWpeak. This corresponds to the average annual electricity demand of more than 1,700 households. Several photovoltaic systems are already being installed at the Lenzing site, including the largest ground-mounted plant in the province of Upper Austria, whose commissioning is imminent.

In 2019, Lenzing became the first fiber manufacturer to set a target to reduce its carbon emissions by 50 percent by 2030 and to be climate neutral by 2050. This carbon reduction target has been confirmed by the Science Based Targets Initiative. Lenzing is also currently investing in reducing carbon emissions at other sites worldwide. Only recently, the Lenzing Group announced that its Indonesian site will also be relying on green energy in the future.