From the Sector

The AVK – Industrievereinigung Verstärkte Kunststoffe – has once again presented its Innovation Awards to companies, institutes and their partners. Three composites innovations were recognised in each of the three categories – “Innovative Products/Applications”, “Innovative Processes” and “Research and Science” – at the new event JEC Forum DACH on 23 November 2021, the first edition of which was held in Frankfurt.

“As usual, the submissions included a lot of very interesting and promising products and processes this year. The Innovation Awards highlight the outstanding efficiency, cost-effectiveness and sustainability of fibre-reinforced plastics as well as the companies and institutes operating in the sector,” explains Dr. Elmar Witten, Managing Director of the AVK. The jury of leading experts from the industry honoured the following innovations this year:

Category “Research and Science”
First place in the “Research and Science” category was awarded to the German Aerospace Center (DLR) for its Bondline Control Technology (BCT). This innovative process is used for quality control and assurance of bonded joints. The core element is a porous fabric which is applied to a joining surface using an epoxy adhesive or matrix resin. Peeling away the fabric creates a chemically reactive and undercut surface and can also be used as a test to check adhesion to the substrate. BCT has potential in a variety of possible applications. For example, peel ply can be replaced by BCT fabric to produce composite components with an optimised joining surface. The cost-effective BCT peel test is suitable for coupon testing and process control. In addition, the combined adhesion test and surface pre-treatment can be used for quality assurance of bonded repairs on fibre composite structures.

Second place was taken by the Institute of Textile Technology (ITA) at RWTH Aachen University and its partners AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR with “StoneBlade – Lightweight construction with granite for the wind industry”. This innovation enables manufacturers to reduce the amount of non-recyclable materials used in rotor blade construction. At the same time, it reduces the weight of these components and improves the mechanical properties relating to the stability of wind turbines. The innovative approach replaces glass-fibre reinforced plastic in the blade components with hard rock – a natural, cost-effective and recyclable lightweight material. The slabs of rock are cut and ground to a thickness of just a few millimetres and embedded in a fibre composite laminate with carbon fibre, which stabilises them for alternating load cases. The pre-stressed material is pressure-stable in the composite and can absorb tensile forces in the event of continuously alternating loads without any loss of stiffness.

Third place went to the Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK) with its partner Mercedes Benz AG for the interdisciplinary development of a highly integrated inductive charging module for electric vehicles. The ultra-thin charging module was designed to make optimum use of space in the vehicle underbody without reducing ground clearance. An interdisciplinary approach was adopted for the development process. This involved the electrical, mechanical and process characterisation of high-frequency Litz wires, ferromagnetic foil and metal wire cloth as well as the creation of a simulation model. The result is a demonstrator for a charging system with a structural height of 15 mm and a total weight of 8 kg. It achieves a transmission efficiency of up to 92 percent at 7.2 kW nominal power and active air cooling. The hardware demonstrator was fabricated in a 3-step process using RTM and VARI techniques.

Overview of all the winners in the three categories:
Category “Innovative Products/Applications”
1st Place: “Traffic signs from Nabasco (N-BMC)” – Nabasco Products BV and Lorenz Kunststofftechnik GmbH, partners: Pol Heteren BV and NPSP BV
2nd Place: “Novel, ultratough vinyl ester resin for the construction of large marine vessels” Evonik Operations GmbH
3rd Place: “Air intake housing with a multi-material design for gas turbines” – MAN Energy Solutions SE, Leichtbau-Zentrum Sachsen GmbH and Leichtbau-Systemtechnologien KORROPOL GmbH.
Category “Innovative Processes”
1st Place: “In-mould wrapping” off-tool, film-coated, fibre composite components for exterior applications – BMW Group, Partner: Renolit SE
2nd Place: “Adaptive automated repair of composite structural components in the aviation sector” – Lufthansa Technik AG, Partner: iSAM AG
3rd Place: “Automated surface pre-treatment using VUV excimer lamps” – CTC GmbH
Category “Research and Science”
1st Place: “Bondline Control Technology (BCT)” – German Aerospace Center (DLR)
2nd Place: “StoneBlade – Lightweight construction with granite for the wind industry” – Institute of Textile Technology at RWTH Aachen University, Partners: AEROVIDE GmbH, Altropol Kunststoff GmbH, Basamentwerke Böcke GmbH, TechnoCarbon Technologies GbR
3rd Place: “Interdisciplinary development of a highly integrated inductive charging module for electric vehicles” – Dresden University of Technology – Institute for Lightweight Construction and Plastics Technology (ILK), Partner: Mercedes Benz AG

Submissions for the next Innovation Award can be made from the end of January 2022.

EREMA is winner at this year´s Plastics Recycling Awards Europe. At the award ceremony as part of the Plastics Recycling Show Europe at 5th November in Amsterdam, EREMA was awarded for its recycling system INTAREMA® TVEplus® RegrindPro® + ReFresher in the category Recycling Machinery Innovation of the Year. Thanks to the combination of its recycling machine with the ReFresher technology that reduces odour downstream of the extrusion process, EREMA has enabled the PCR-HDPE produced with it to be used in proportions of up to 100 percent for the production of packaging for direct contact with food and beverages, as confirmed by the U.S. Food and Drug Administration (FDA).

The judges recongised this innovation as a step change in eliminating unwanted odour from waste plastics, allowing recyclate to replace virgin palstics in high end applications. This type of innovation is essential for meeting EU targets for recycled content of food contact plastics.
The market also confirms awarding this technology. By the end of 2021, EREMA customers will produce 450,000 tonnes of high-quality, odor-optimized regranulate per year, with it.

INDEX™20 opened its doors, after an 18 month’ wait, delighted to welcome the nonwoven industry back to Geneva with open arms. The exhibition floor was busting with activity and anticipation at the prospect of new business.  

Over 500 exhibitors from 44 countries were present at the event, premiering their latest innovations. The resounding message was one of a positive outcome and an inspiring vision of the industry’s future across the spectrum of applications sectors.

The industry continued to evolve dramatically during the pandemic, and expectations were high as players from across the industry worldwide came together for the first time since 2017. Exhibitors said their expectations were exceeded, citing the high quality of the visitors present, converging on INDEX™ to conclude new business projects.

Over 9,300 visitor entries were recorded on-site, and over a thousand on the virtual platform. 

As the industry’s first hybrid industry event, many attendees made the most of the interactive INDEX™ virtual platform by arranging video meetings and messaging as well live exchanges. It also meant those unable to attend personally benefitted from the rich Sector Seminar programme and a wide variety Exhibitor Product Presentations.

The Innovation Lab opened its doors for the first time, demonstrating the sheer diversity of applications in which nonwovens are employed. The spotlight was on nominees of the INDEX™ Innovation Awards, and the winners presented with their coveted bronze statues designed by Belgian artist Olivier Strebelle. This initiative demonstrates the innovative properties and uses of nonwovens across a wide range of sectors, demonstrating the exciting future of the industry and its suppliers.

INDEX™23 will take place from 18 to 21 April 2023.

• Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

John Nims, President of U.S. Cotton said, “We are proud to be involved in a national effort to help deploy these testing kit swabs for the American people. These swabs are designed to make it easier for people at home to self-administer coronavirus tests and will also be used for mass testing applications, which is critically important. We greatly appreciate the collaboration with DOD and HHS to ramp up essential capacity of polyester-based synthetic swabs that will help in the fight against the pandemic.

“We continue to step up to meet our nation’s critical need for American-made coronavirus testing kit swabs on a massive scale. It is an honor to work with our government to help fight this pandemic and use our innovative technologies based here in the United States to fill a national and global demand for testing kits. I especially want to thank Senator Brown and Senator Portman for all their incredible support to help us retool and expand our operations in Cleveland. We can’t thank them enough for their tireless work and also want to recognize their hard working staff. As the Delta variant surges across the country, this timely investment will help in the fight against COVID by adding this much-needed, long-term surge capacity.”

Kim Glas, President and CEO of NCTO, said, “We want to sincerely thank President Biden, the Department of Defense, and the Department of Health and Human Services for leading this critical industrial expansion effort. We appreciate the administration’s commitment to expand the U.S. industrial base for these essential products.  We have a once-in-a-generation opportunity to onshore these critical supply chains long-term and we look forward to working with the administration and Congress to advance long-term solutions.”

INDA, the Association of the Nonwoven Fabrics Industry, and Nonwovens Industry Magazine announced the opening of nominations for the prestigious IDEA® Achievement Awards. IDEA® is the preeminent event for the nonwovens and engineered fabrics conference and exposition and will be held at the Miami Beach Convention Center in Miami Beach, Florida USA, March 28-31, 2022.

The IDEA® Achievement Awards recognize leading companies and new innovations (since IDEA® in 2019) in the global engineered fabrics industry in six categories. Companies may now nominate their products, or their customers’ products, in the following categories:

• Sustainability Advancement (advances one or more elements of sustainability or circularity since 2019)
• Equipment (best new equipment introduction since 2019)
• Raw Materials (best new raw materials introduction since 2019)
• Short-Life (best new disposable product introduction since 2019)
• Long-Life (best new durable product introduction since 2019)
• Nonwoven Product (best new nonwoven product introduction since 2019)

• Digital Pioneer Awards ceremony at the digitalCHURCH
• ITA Academy GmbH was honoured to receive the Digital Pioneer Award at the Digital Summit Event in Aachen on June 09, 2021.

The Digital Pioneer Award is given to companies that drive digitalisation with digital business models, processes or digital products. ITA Academy GmbH was honoured with the Digital Capability Center (DCC) Aachen and its support of companies in their digital transformation.

Using the latest didactic methods, sophisticated solution concepts and state-of-the-art technologies, the DCC Aachen supports people in keeping up with the digital future and becoming pioneers in digital transformation. In order to make innovative solutions such as AI and digital assistance systems tangible, the ITA Academy founded the Digital Capability Center (DCC) Aachen together with McKinsey & Company in 2017. The DCC is a model factory 4.0 in which digital applications are demonstrated and taught using the example of a realistic factory. The DCC thus offers a learning environment for companies in which participants are supported in building up competencies in the field of digital transformation in the form of practical work-shops.

The digital pioneers are to be publicised as best-practice examples in order to sensitize regional SMEs to the topic of digitisation. Around the award of the digital pioneers, the digitalHUB Aachen e.V. rolls out effective marketing activities. The pioneers achieve high visibility through the various planned campaigns and advertising opportunities.

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

Sicomin, the formulator and supplier of the leading range of GreenPoxy bio-based epoxy resin systems, supplied its DNV GL approved InfuGreen 810 resin system that was used to infuse the Green Nacelle’s main structural sandwich panels, as well as providing intumescent FR gelcoats, bio-based laminating resins and UV resistant clear coatings for the groundbreaking new nacelle.  Materials, as well as on-site technical support, were delivered by Sicomin’s German distributor TIME OUT Composites.

The winners of the awards will be announced during JEC Connect which will be held on the 1st and 2nd June 2021.

On June 1-2, 2021, JEC Composites Connect, the first round-the-clock digital event of the composites industry, will host significant industry players, enabling participants to discover their latest innovations. Three competitions the JEC Composites Challenge, the JEC Composites Startup Booster, and the famous JEC Composites Innovation Award, will also put the spotlights on the most innovative solutions and products this year

Key Figures

More than 1,000 companies from all the composites value chain spanning 46 countries will participate, network, and present their latest products on their digital booths.

Exhibitor’s breakdown by industrial sector :

• Raw materials
• Intermediate products
• Equipment, tools, and ancillary products
• Distribution, agents, and representation
• Third parties, services, engineering, and R&D
• Composite’s part producers and processors
• Composite’s end-users and integrators

Highlighting excellence and innovation

JEC Composites connect will also be the place to promote the composites sector’s biggest innovative projects. Many product launches are expected to be announced over the two days of the show, evidences a solidly dynamic sector led by high-performance and environmentally friendly innovations.

Among which 65 product launches are listed in the 2021 Innovation Report: from Raw materials, Intermediates and Ancillary, R&D to Production and Equipment, including Simulation and Measurement and Services.

Competitions and awards ceremonies

The JEC Composites Challenge will give the floor to ten young researchers from around the world on June 2nd at 12pm CEST. They will have five minutes to convince a panel of judges composed of leading industrial players in the composites sector. The competition builds bridges between research and industry and is a highlight of the event.

The 2021 JEC Composites Startup Booster has a line-up of 20 finalists who will pitch during two live sessions on June 1st from 10:30 am to 11:30 am and from 5 pm to 6 pm CEST. The 2021 JEC Composites Innovation Awards will celebrate the most innovative composites projects and fruitful collaborations between different value chain players in 2021.

The Biden Administration has awarded two contracts to National Council of Textile Organizations (NCTO) members Parkdale Mills and Ferrara Manufacturing Inc., following through on the President’s pledge to procure millions of fully Made in America face masks for community health centers, food pantries and soup kitchens across the country.  A third contract is expected to be awarded to a small business early next week.

North Carolina headquartered Parkdale Mills, the nation’s largest cotton yarn spinner, has partnered with Ferrara Manufacturing, a tailored clothing company based in New York City’s garment center whose workforce is union represented by Workers United/SEIU, to manufacture over 17 million reusable masks. The government said it could purchase up to a maximum of 22.2 million masks under the two contracts announced today. The masks will be Berry compliant and thus 100% U.S.-made.

Ferrara Manufacturing and Parkdale Mills will contract with additional U.S. companies across the manufacturing supply chain, employing nearly 5,000 American workers as a result of these awards.  Parkdale will be utilizing yarn from their facilities in NC, VA, and GA and Ferrara will deploy their cut and sew operations in New York City.

The U.S. textile industry has produced over a billion lifesaving PPE and other medical products over the last year.  Since the spring of 2020, both Ferrara and Parkdale have retooled their production chains to help produce millions of masks and gowns to help workers on the frontlines. 

• Mostafiz Uddin, Managing Director of Denim Expert Limited and Founder of Bangladesh Apparel Exchange (BAE) has won Sustainable Fashion Champion at the Drapers Sustainable Fashion Awards 2021, which took place virtually on 10 March.

On receiving the award, Mostafiz said he wants to be a game-changer in the apparel industry, leading by example to inspire others to behave responsibly and ethically.

He also dedicated the award to H&M which, he explained, supported his business, Denim Expert, through the pandemic by continuing to place orders He said the loyal support of the Swedish fashion giant almost certainly helped save the livelihoods of 2000 workers at his factory and their 10000 family members. “That’s true sustainability leadership,” he said.

The Drapers Sustainable Fashion Awards recognise steps being made in reducing the fashion industry’s environmental impact and creating fairer working conditions across the supply chain.
Judged by an independent panel of sustainability and fashion retail experts, the awards shine a spotlight on best practice within the global fashion industry.

Covid-19 has presented unforeseen challenges for fashion retailers and brands, but it has also given us all an opportunity to build back better. Forward-thinking fashion businesses know change is not optional, and are embracing their responsibilities and ability to make a difference.

Mostafiz Uddin has been recognised as the Sustainable Fashion Champion 2021 for setting examples in promoting sustainability during the Covid-19 pandemic which broke out worldwide in March last year.
Jill Geoghegan, Acting Editor of Drapers, said: “Despite the challenges thrown up by the Coronavirus pandemic, fashion brands and retailers increasingly recognise that sustainability is a business imperative.”  
“Many businesses continued to invest in cleaning up their supply chains and introducing new models of working, despite the unprecedented trading conditions.

“The Drapers Sustainable Fashion Awards highlight and celebrate these advancements, paving the way for a more responsible future for the industry.” Managing Director of Denim Expert Limited Mostafiz Uddin said: “In the pandemic, my factory Denim Expert Limited kept true to its commitment towards sustainability, despite an extremely difficult trading landscape.

“During the pandemic, I was vocal about the issue of buyer-supplier relationships and, in speaking out, I wanted to champion the cause of suppliers all over the world. Too often suppliers in garment supply chains do not have a voice because they fear that by speaking out, they will be treated unfavourably by brands.

“This was, of course, a risk on my own part but I like to think I stood up for what I think is right and ultimately, I believe progressive brands understood I was coming from a good place. Like them, all I want to see is a fair, ethical and sustainable industry where brands and retailers work in an environment of collaboration, not conflict.”

Mostafiz also had some special praise for H&M. He said: “It would have not been possible for me to support my workers during the pandemic, had my factory not received help from H&M during the unprecedented time. While Denim Expert suffered from huge orders cancellation and orders hold, H&M supported us by placing orders in the pandemic that saved thousands of lives and livelihoods. Therefore, I would like to dedicate this Award to H&M and its CEO Helena Helmersson.”

The judges of Drapers Sustainable Fashion Champion Award 2021 have been Kerry Bannigan, Founder, Conscious Fashion Campaign; Sarah Ditty, Global Policy Director, Fashion Revolution; Miriam Lahage, Founder, Aequip; Samata Pattinson, CEO, Red Carpet Green Dress; Caroline Rush, Chief Executive Officer, British Fashion Council; Lucy Shea, Group CEO, Futerra; Jane Shepherdson, Chairman, My Wardrobe HQ; and Dilys Williams, Director, Centre for Sustainable Fashion.