From the Sector

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

Daniel He describes the situation: „The Chinese market is picking up again; a price increase of 7% for glass fibers was announced right before the China Composites Show, on August 25th 2020, which was even leading to a temporary material shortage. Today, the most booming industries in China are wind energy, building and infrastructure and innovation for electric cars. Unlike the rest of the world, where the aircraft industry undergoes a deep decline, in China it takes up by 50 %, which is very promising. Furthermore, we expect half a year for a full recovery of the industry, while the China growth of 2020 is still expected to be between 2 and 4 %.“

Michael Effing replied: “Enabling the composites business between China and Europe is the aim of our cooperation with Reach and with our customers, which are active in digital automatization, testing equipment or cost optimization software. We are very happy to have been present in China through our representant Reach and are looking forward to bridge and overcome the Covid-19-crisis with our upcoming event in Germany, the Composites for Europe in Stuttgart in November and hope to be back to full global business speed at the JEC in Paris in 2021.“

The Oerlikon Barmag Huitong Engineering joint venture, part of the Oerlikon Manmade Fibers segment, recently commissioned a polycondensation system which feeds a polyester industrial yarn system. The future operator will be industrial yarn manufacturer Jiangsu Solead New Material Group Co. Ltd., which is placing its trust in the Oerlikon Manmade Fibers ‘From Melt to Yarn’ total solution philosophy.

This successfully concludes the first phase of this major project. Oerlikon Barmag Huitong Engineering installed the polycondensation system, which has a capacity of 600 tons a day, at Jiangsu Solead New Material Group Co. Ltd. in the Chinese Jiangsu Province. This will be connected to an Oerlikon Barmag industrial yarn spinning system with a 350-ton-a-day capacity. The new systems will be deployed to produce predominantly high-tenacity (HT) yarns for use in agricultural, infrastructure, transport, security and outdoor applications. These systems can be used to manufacture yarns with up to 3 x 6,600 dtex of high yarn quality with simultaneously high production efficiency. Furthermore, low-shrinkage yarns for coating textiles and so-called LDI yarns (high-tenacity, low-denier industrial yarns) for industrial sewing yarns, among other things, are also manufactured.

• AACOMA - Accelerate advanced composite manufacturing
• EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

The Euregio Meuse-Rhine is a potential hot-spot for the further development of advanced material and process technologies. Technical Centers and Institutes around Aachen/Germany, Liège/Belgium and Eindhoven/The Netherlands were awarded with this new project AACOMA.

Innovative material design and advanced manufacturing provide large opportunities for SMEs. The AACOMA project kick-off took place in Aachen at the Campus of the RWTH University of technology in 1 Q 2020. The aim of the project, which is running for 3 years until 2023 with a budget of €3 Mio, is to connect SMEs with innovation hot-spots like institutes and technical centers.
Seven partners from all three regions will carry the project out: Centexbel is the project leader and gets support by University of Liège, Sirris and Flanders Make from Belgium, as well as Fontys University of Applied Science and AMIBM of Maastricht University in the Netherlands and AMAC in Germany.

Statements

Bernard Paquet, Project Coordinator from Centexbel/ Belgium stated:
“Centexbel, with a strong experience in textile and composites, will identify with its Interreg partners and an advisory board of international experts several demonstrators which will enable an accelerated advanced manufacturing of composite parts. This could include new materials and intermediates, high performance additives, bio-based products and new composites by additive manufacturing”.

Michael Effing, Managing Director of AMAC/ Germany said:
“The major goal of the project is to connect around 200 innovative SMEs with each other and establish the links to the world-class institutes in the EMR region. We will facilitate 6 roadshow events, addressing key topics like automated manufacturing, additive manufacturing or bio-based material systems combined with match making and training events. The first roadshow will be held on September 24, 2020 at the Aachen Campus of the RWTH University of Technology.”

Prof. Gunnar Seide from the AMIBM/The Netherlands continued:  
“Our AMIBM offers already an international master program on bio-based materials. The AACOMA project will be an important element for transborder research and will identify new players in the value chain coming from the EMR region. Innovative companies find markets for their new bio-based building blocks, chemicals and polymers. Their success stories and upcoming technological breakthroughs are needed for a sustainable future.”

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

The demand for high-quality MNS and respiratory masks for medical personnel is increasing rapidly, and there is real competition on the international market for these products. In order to sustainably secure domestic supply now and in the future and to strengthen the business location, the two companies Lenzing AG and Palmers Textil AG have now set a milestone with their own competence center for hygiene based in Austria.

Hygiene Austria LP GmbH thus makes a significant contribution to combating the Covid-19 pandemic and ensures the long-term supply of these critical goods in Austria in high quality.

In the AZL Workgroup "High-Performance SMC", a project was developed in cooperation with M-Base, the IKV and the AZL partner network for the efficient and standardized provision of engineering data for SMC. Within the scope of the project, companies can participate in the definition of the required characteristic material data, the guidelines for the production of test specimens and the test specifications.
Sheet Moulding Compounds (SMC) are used in various application areas such as vehicles, electronics, construction and infrastructure.

Driven by the requirements to reduce the production costs of lightweight components, a new generation of SMC components with high mechanical properties is of highest relevance. SMC offers enormous potential to realize structural components with good lightweight characteristics at significantly reduced costs compared to conventional continuous fiber-reinforced components.
In order to further establish SMC in broad industrial applications companies participating within the AZL Workgroup recognized the value of a data bank for data harmonization of SMC to provide the possibility of easily finding the right material with its characteristics for the needed specific requirements.

“The segment of SMC is with 250,000 tons production per year the largest composites market in Europe. I am very pleased that we start now with the project of data harmonization along the complete value chain. The goal is to have a similar data base as already established by Campus® for thermoplastics and thermoplastic composites. Only with a reliable set data we can convince the engineering experts to use SMC in a larger variety of applications,” says Dr. Michael Effing, Chairman of the Board of AVK and Composites Germany.

As of right now a databank for engineered thermoplastic materials (by Campus®) already exists and is offering an immense value.
Under the lead of M-Base, Dr. CEO Erwin Baur who has successfully established the CAMPUS database, the AZL, IKV and companies along the value chain of long fibre reinforced SMC initiated to build a CAMPUS-compatible data structure and material characterization methodology during the High-Performance SMC Workgroup Meetings.

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

As a result, India’s Ministry of Textiles is forecasting that the growth of technical textiles in the country will be over 18% annually in the next few years, from a value of US$16.6 billion in 2018 to US$28.7 billion in 2021.

Value addition

High value-added technical products such as wide-width digital printing substrates, carbon fabrics for high-performance composites, filter media, flame retardant barrier fabrics and heavy-duty membranes are now being coated on Monforts texCoat ranges and finished with the company’s industry-leading Montex stenters.

“Since we acquired the technology that our coating units are based on in 2015, we have made a lot of refinements,” says Hans. “All of these developments are reflected in higher coating accuracy and the resulting quality of the treated fabrics. At the same time, our latest multi-functional coating heads offer an unprecedented range of options, with a wide range of modules available.”

The texCoat user interface is now equipped with the unique Monforts visualisation system and the magnetic doctor blade has greater power reserves. Options include a carbon fibre-reinforced composite coating drum with a more scratch-resistant surface and maximum rigidity and remote control which simplifies exact adjustment for the operator.

Montex stenters in special executions are meanwhile ideal for the drying and finishing of both technical woven fabrics and nonwovens and characterised by high stretching devices in both length and width.

“The European-built Montex range of stenters has earned its leading position in the technical textiles market due to the overall robustness, reliability and economy of these machines,” Hans concludes. “Whatever the intended end-product – and we continue to discover potentially new areas in which technical textiles can be utilised all the time – we have the machine specification and know-how to turn ideas into reality. In India we also benefit from the strong sales and service support of A.T.E. Enterprises.”

Texchtextil India takes place alongside World of Composites at the Bombay Exhibition Centre in Mumbai from November 20-22.

partner confirms start-up date of the project in Thailand

With the recently announced plans to establish a lyocell production facility in Thailand, the Lenzing Group is taking an important step in meeting the strong demand for lyocell fibers and is further strengthening the company´s position as an industry leader in the specialty cellulosic fibers market. The proposed plant will be the largest lyocell plant in the world, with an annual capacity of 100,000 tons. The total investment volume for the first production line, including infrastructure and site development, amounts to approximately EUR 400 million. Up to four such lines can be potentially integrated and operated on the site. The project is of great importance to Lenzing as it is the first step in bringing lyocell production to Asia, featuring the largest markets, the most important customers and the most extensive growth potential in specialty fiber production.

On April 11^th, 2019, the 9 Partner Institutes of the AZL opened the doors of their machinery halls and research labs to provide an extensive and on-site insight into the research and development capaci-ties in the field of lightweight production and composites at the RWTH Aachen Campus. As a special highlight of this year, the AZL presented the "iComposite 4.0" self-optimizing process chain: fiber-spraying - dry fiber placement - adaptive RTM as well as AZL´s new prototype machine development "Ultra-Fast Consolidator Machine" for highly productive and flexible processing of thermoplastic tapes with in-situ consolidation (winner of the JEC World Innovation Award 2019).

More than 100 Participants from external companies as well as from the AZL Network had the possibility to experience updates on the latest lightweight production technologies and equipment, get to know the bene-fital infrastructure on the Campus and network with internationally represented companies of the entire light-weight value chain researches by taking part in five guided tours to the lightweight institutes.

The AZL brought together content in the field of textiles (ITA), plastics and composite materials (IKV), pro-duction technology (WZL, IPT, ILT, and ISF), quality assurance and production-integrated measurement technology (WZL), lightweight design (SLA), automotive production (IKA) as well as multi-material systems and process integration (AZL).

Once a year at the Open Day, the AZL offers an exclusive and widespread unique insight into the R&D capacities of the institutes in the field of lightweight and composite technologies on the campus of RWTH Aachen University. Within walking distance, researchers and students from 9 institutes are working on the latest technologies for the cost-efficient development and production of lightweight components within one of the largest research landscapes in Europe. The research, closely involving industrial companies, covers the entire value chain from fiber production, materials and processing technology to quality assurance and com-ponent testing.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

Ted Baker, the global lifestyle brand, announces that on October 4th 2018 it entered into a Global product licensing agreement with Timex Group (“Timex”). The new agreement will allow Ted Baker to underpin its own global plans with a unique product offering in watches that fully compliments its apparel and accessory collections.

Commenting, Ray Kelvin CBE, Founder and Chief Executive of Ted Baker, said:
“This is an exciting opportunity for Ted Baker to drive accelerated growth in our watch business by leveraging the Timex Group global footprint and infrastructure, in line with our strategy to further develop Ted Baker as a global lifestyle brand.”

Commenting, Tobias Reiss Schmidt, President and Chief Executive Officer of Timex Group, said:
“We are delighted to bring Timex Groups expertise and long history as an authentic watchmaker to Ted Baker and look forward to producing exciting and innovative timepieces for their consumers”. Timex Group will launch the collections Internationally through premium retail partners and its global distributor network in summer 2019.