From the Sector

Reset
132 results
Fast Concept - Paper leather jacket, by Prof Kay Politowicz and Dr Kate Goldsworthy UAL (c) RISE AB
Fast Concept - Paper leather jacket, by Prof Kay Politowicz and Dr Kate Goldsworthy UAL
23.11.2018

New research pushing the limits for ‘fast’ and ‘slow’ fashion towards a sustainable, circular future

  • conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

  • conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

Award-winning TINTEX Textiles shows water saving solutions at Performance Days (c) TINTEX Textiles
80% Lenzing Modal® + 20% European Hemp rib by TINTEX Textiles
20.11.2018

Award-winning TINTEX Textiles shows water saving solutions at Performance Days

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

All the recent awards bestowed, demonstrate TINTEX continue research and commitment. They have been awarded for the Best product of the Base Layer Category by ISPO jury, moreover they have just received the prestigious German Design Awards 2019 and last but not least, they are selected as finalists for the Future Textile Awards in the category Best Innovation for Sustainable Textiles.
TINTEX continues to lead the way, as they proudly take part in the Make Fashion Circular initiative, by the Ellen MacArthur Foundation and activate change industry wide. This initiative aims to collaborate and innovate towards a new textile economy based on the principles of a Circular Economy.

In addition, since this November, TINTEX is a bluesign® system partner, thus means that they are responsibly acting parties of the textile value chain committed to applying the bluesign® system, continuously improving their environmental performance and always been focused on a sustainable future.

A milestone for TINTEX and fashion, as they launch Naturally Clean - an exceptional smart finishing process that is uniquely responsible. Naturally Clean enhances the natural beauty of cotton, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean achieves this by using Novozymes technology, a company that is indeed the world leader in biological solutions. Second, using textile chemicals with the lowest possible environmental impact, without compromising performance, from Beyond Surface Technologies AG. Naturally Clean maintains the original characteristics for an extended period of time. All materials are Oeko-Tex and soon bluesign® certified, thus eliminating harmful substances.
TINTEX’ Autumn/Winter 2019/2020 collection includes vibrant tones, refreshing turquoise and electric green, light and warm copper with chocolate browns that connect the natural and spiritual in an extra-sensorial universe. Infused with a stunning palette of nostalgic and multicultural colors - warm yellow with darkened reds, dynamic purple with urban greys - that express globalization and human connection.
Key smart ingredients of the season are:

  • A New Generation of Cotton: GOTS certified organic cotton, Supima® cotton, and ECOTEC® by Marchi & Fildi the smart cotton that saves up to 77.9% water consumption and introduces the concept of a circular economy.
  • SeaCell™ and Smartcel™: produced using the Lyocell process in a closed loop with no chemicals released as waste. The patented process of SeaCell™ allows that the positive properties of the seaweed are permanently preserved within the fiber, even after multiple washing cycles. Smartcel™ includes the essential trace element zinc providing anti-inflammatory capabilities.
  • REFIBRA™ by Lenzing technology involves upcycling a substantial proportion of cotton scraps e.g. from garment production, in addition to wood pulp, where the raw material is transformed to produce new TENCEL™ Lyocell fiber to make fabrics and garments.
  • Bemberg™ by Asahi Kasei: A new generation GRS Certified material, made from cotton linters, with a biodegradability certification by Innovhub. A matchless, high tech natural material, with a special handfeel and aesthetics.
  • ROICA™ by Asahi Kasei
    - ROICA™ EF has a percentage of pre-consumer recycled content that is more than 50%, and thanks to this it has been GRS (Global Recycled Standard) certified.
    - ROICA™ V550 a premium stretch innovative yarn boasting the Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients as it was evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

Of special interest this season, the two TINTEX’s fabrics that made it into the PERFORMANCE FORUM Jury’s Pick Category for their contribution to this season Topic “WATER – OUR RESPONSIBILITY”.

A smart rib developed to reduce the water usage as most as possible, from cultivation of raw materials until fabric finishing. A blend of TENCEL™ Modal, cellulosic & biodegradable material treated with no hazardous chemicals, pesticides nor fertilizers, and European hemp, a fast-growing plant that requires very little water and no herbicides, pesticides, synthetic fertilizers or GMO seeds. Both fibres are biodegradable.

The second selected article is a 100% Merino Wool jersey made unique thanks to Colorau® by TINTEX, a patented natural dyeing process technique that uses vegetable herbs and extracts. A great amount of water was saved by avoiding subsequent washing steps. Also, lower water pollution is achieved by avoiding synthetic dyestuffs.

More information:
TINTEX ROICA™ Performance Days
Source:

GB Network

(c) 2018 GB Network Marketing & Communication
23.10.2018

ReLAST: the Super-Smart GOTS and GRS certified Stretch Denim from Candiani with ROICA™

Candiani launches at Kingpins its new eco-smart denim range in partnership with ROICA™ from Asahi Kasei
Both companies can claim their separate leading roles in textile innovation. Candiani, ‘the Greenest Mill in The Blue World’, is always at the cutting edge of new developments, and ROICA™  with  its  various premium stretch functions. Now they join forces through a unique synergy and an exclusive, custom made premium stretch sustainable ROICA™ yarn developed by Asahi Kasei especially for Candiani.
 
ReLAST is a range of market fresh responsible denim products, designed by Candiani that tick every smart box: from new ways in colouration, to better, more sustainable raw materials, new finishing and fade-tech that minimises water waste, and now with a key responsible stretch ingredient in a specially produced GRS certified ROICA™ yarn that perfectly completes this range making better, more sustainable, sharp fashions for customers looking to live and wear better with better values.

Candiani launches at Kingpins its new eco-smart denim range in partnership with ROICA™ from Asahi Kasei
Both companies can claim their separate leading roles in textile innovation. Candiani, ‘the Greenest Mill in The Blue World’, is always at the cutting edge of new developments, and ROICA™  with  its  various premium stretch functions. Now they join forces through a unique synergy and an exclusive, custom made premium stretch sustainable ROICA™ yarn developed by Asahi Kasei especially for Candiani.
 
ReLAST is a range of market fresh responsible denim products, designed by Candiani that tick every smart box: from new ways in colouration, to better, more sustainable raw materials, new finishing and fade-tech that minimises water waste, and now with a key responsible stretch ingredient in a specially produced GRS certified ROICA™ yarn that perfectly completes this range making better, more sustainable, sharp fashions for customers looking to live and wear better with better values.

New Colouration values in the K-Seal range come from indigo applied with a water saving Indigo Juice® system. Or in the KN-Cotton range from cotton scraps recycled and dyed with Archroma earth colours. Both are sized with the Kitotex® Vegetal size derived from plants and natural renewables.

Source:

2018 GB Network Marketing & Communication

(c) AGENCE APOCOPE
22.10.2018

12 Composites Innovators to receive a JEC Innovation Award in Seoul next November 15, 2018

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

METALBOTTONI  presents the new collection VÀNITA (c) METALBOTTONI
19.09.2018

METALBOTTONI presents the new collection VÀNITA

  • Italian expertise, research and green innovation.
  • METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

  • Italian expertise, research and green innovation.
  • METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.

More information:
Metalbottoni Leather Accessoires
Source:

Menabò Group s.r.l

26.07.2018

Archroma to present solutions towards innovative and sustainable denim to India industry

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

  • Optisul® C, “soft colors” made easy
    With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
    They are suitable for GOTS and bluesign® approval.
  • Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
    Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
    They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
  • Diresul® blacks & greys, a cosmos of greys and deep black and navies
    Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

More information:
Archroma
Source:

Archroma

09.07.2018

Penn Textile Solutions & Penn Italia and ROICA™ by Asahi Kasei Introduce ECOINNOVATION @ INTERFILIERE Paris

Penn Textile Solutions and Penn Italia introduce ECOINNOVATION, fully sustainable products range! These must-see products are created using the world’s first premium stretch yarn by ROICA™ that is Cradle to Cradle Certified™ Gold level for Material Health and Hohenstein Environment Compatibility Certificate for breaking down without releasing harmful substances.

Penn Textile Solutions and Penn Italia, a fully integrated international-minded company with over 50 years’ expertise in producing innovative warp and weft knit textiles that answer customers’ demands, including fantastic elastomeric knitted textiles.

Penn Textile Solutions and Penn Italia wisely picks ROICA™ premium stretch fiber to create our ECOINNOVATION, a new fully sustainable range of advanced textiles that are 100% sustainable. ROICA™, produced by Asahi Kasei, is the secret premium stretch ingredient we used to provide comfort, enhance quality and confidence. Thus, making stretch performance a specialty fiber that generates new values for contemporary consumers.

Penn Textile Solutions and Penn Italia introduce ECOINNOVATION, fully sustainable products range! These must-see products are created using the world’s first premium stretch yarn by ROICA™ that is Cradle to Cradle Certified™ Gold level for Material Health and Hohenstein Environment Compatibility Certificate for breaking down without releasing harmful substances.

Penn Textile Solutions and Penn Italia, a fully integrated international-minded company with over 50 years’ expertise in producing innovative warp and weft knit textiles that answer customers’ demands, including fantastic elastomeric knitted textiles.

Penn Textile Solutions and Penn Italia wisely picks ROICA™ premium stretch fiber to create our ECOINNOVATION, a new fully sustainable range of advanced textiles that are 100% sustainable. ROICA™, produced by Asahi Kasei, is the secret premium stretch ingredient we used to provide comfort, enhance quality and confidence. Thus, making stretch performance a specialty fiber that generates new values for contemporary consumers.

ECOINNOVATION presents seven unique articles developed belonging to Penn Textile Solutions and Penn Italia’s family dreamshape® characterized by reinforced edges and seizing that includes the following recycled items; tulle, tulle galloons with dreamshape® reinforced edge, tricot, dreamshape® reinforced gripping edge (great for cycling shorts), stretch satin, polyester tulle and polyester double jersey perfect for laser cutting.

Source:

GB Network

09.07.2018

ILUNA Group with ROICA™ by Asahi Kasei

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of embroidery and guipure are all produced with only recycled materials.
IIn addition to the launch of the Embroidery Division, this season novelties include:

1. Of major interest today, the launch of velvet lace entirely made of sustainable materials including ROICA™ Eco-Smart family.

2. Within the Black Label collection, the Ultralight series is enriched with new multicolor floral galloons: here Iluna changes the color of the thread not only in the background, but also in the design, the same article reinvents itself in a variety of great visual impact.

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of embroidery and guipure are all produced with only recycled materials.
IIn addition to the launch of the Embroidery Division, this season novelties include:

1. Of major interest today, the launch of velvet lace entirely made of sustainable materials including ROICA™ Eco-Smart family.

2. Within the Black Label collection, the Ultralight series is enriched with new multicolor floral galloons: here Iluna changes the color of the thread not only in the background, but also in the design, the same article reinvents itself in a variety of great visual impact.

3. Green Label collection, the Iluna dedicated range featuring a new responsible approach in respect of the planet and people, able to deliver innovation, beauty and quality, at 360°. In addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring new stretch Galloon laces fully made with GRS certified recycled materials, including the stretch thanks to the introduction of the unique ROICA™ sustainable yarn part of the ROICA™ Eco-Smart family.

4. ILUNA has strategically included in all their stretch laces only ROICA™ Eco-Smart family of sustainable yarns since some time.

5. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification that clarifies and communicates the company’s sustainable production commitment. In addition to this, all products are Oeko-Tex 100 certified.

6. ILUNA has created the new e-shop offering its exclusive materials to smaller companies looking for added values as: creativity, innovation, made in Italy and responsibility.

7. The whole collection is also visible online at its web site, previous registration, and orders can be done directly online always aiming to customers care.

 

 

22.06.2018

Filpucci @ PITTI Filati- The journey of responsible innovation continues

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

  • The GOTS (Global Organic Textile Standard) and OCS (Organic Content Standard) certifications obtained by the Filpucci dyeing plant add to the Clear to Wear (CTW) standard developed by Inditex Group and achieved in 2014 and to the Detox commitment, which was signed in February, 2016.
  • Not only the best raw materials, but also an established knowhow in the fields of dyeing and finishing, always under the key concept of Responsible Innovation. This concept extends to each and every FILPUCCI collection and their ever-increasing offer, the roughly twenty innovative new items, the Woolen line of carded yarns and the real spearhead of premium fashion, the Collection. Among this season’s new offer: Baby Camel Re.Verso™, RWS- certified merino organic wool, Re.Verso™ cashmere, organic silks and FSC-certified viscose.
  • The achievement of further certifications such as the FSC (Forest Stewardship Council) for viscose shows the care and respect towards the ecosystem as a whole, guaranteeing a product derived from a forest or a plantation forest in the respect of strict environmental, social and economic standards. The RWS (Responsible Wool Standard) finally guarantees the use of wool coming from livestock managed under rigorous criteria oriented towards the wellbeing of animals and the reduction of environmental impact.
  • Filpucci Group is all about a constant vocation towards new generation values and a reliable, traceable and transparent manufacturing process, as shown by the Re.Verso™ circular economy supply chain, of which the group is a unique ambassador in the field of high-end/low-impact knitwear yarns.

With absolute quality always in mind, FILPUCCI GROUP represents a corporate model that has made of sustainability a real mission, embarking on complex paths that have brought great results with fashionable textile solutions lead by ethnical and sustainable values. Thanks to this, Filpucci’s products have become part of Patagonia Collections, an important acknowledging from the brand’s part, whose managers stated: “We are always on the hunt for the highest performing, lowest impact materials. We were thrilled to find Re.Verso ™ (95/5 transformed) Cashmere yarn from Filpucci. It allowed us to create a range of products with the insulative and soft properties of cashmere while adhering to our mission statement; build the best product, cause no unnecessary harm.”
FILPUCCI GROUP’s commitment is evident and it moves forward thanks to the passion towards responsible and innovative paths that contribute to turning the group into a reliable partner, symbol of quality and excellence.

Filpucci is also a C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy) partner.

Source:

GB Network Marketing & Communication

03.04.2018

Archroma at China Interdye 2018

  • Visit Archroma at China Interdye 2018, Booth A100, April 11-13, 2018, at the ShanghaiWorld Expo Exhibition & Convention Center, Shanghai, China

Archroma, a global leader in color and specialty chemicals, will present at China Interdye 2018 its latest technologies, under the motto: “Enhanced solutions for color and performance, it's our nature”.
With a heritage of more than 130 years, Archroma provides solutions that combine performance, safety and low impact on resources. The company can draw on its extensive formulation and technical know-how to offer a constant flow of eco-advanced and innovative new in dyestuff and pigments, as well as process and functional chemicals.
Solution packages for innovation

Visitors at Archroma’s Booth A100. will be able to ‘experience’ Archroma's innovative solutions, in particular:

  • Visit Archroma at China Interdye 2018, Booth A100, April 11-13, 2018, at the ShanghaiWorld Expo Exhibition & Convention Center, Shanghai, China

Archroma, a global leader in color and specialty chemicals, will present at China Interdye 2018 its latest technologies, under the motto: “Enhanced solutions for color and performance, it's our nature”.
With a heritage of more than 130 years, Archroma provides solutions that combine performance, safety and low impact on resources. The company can draw on its extensive formulation and technical know-how to offer a constant flow of eco-advanced and innovative new in dyestuff and pigments, as well as process and functional chemicals.
Solution packages for innovation

Visitors at Archroma’s Booth A100. will be able to ‘experience’ Archroma's innovative solutions, in particular:

  • EarthColors, traceable from nature to fashion
    The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
    The EarthColors have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.
     
  • Color Atlas, a game-changing system for fashion design
    The Color Atlas by Archroma® is a groundbreaking platform specially devised to address the needs of designers, brands, retailers, and manufacturers, enhancing creative possibilities for the industry as well as manageability and time to market through key complementary tools: The six-volume ‘Color Atlas Library’ with 4,320 color swatches and cotton poplin samples, the ‘Color Atlas Compact’ in two volumes for increased portability, and the ‘Color Atlas Online’ allowing to capture an inspiring image using a smartphone and immediately identify the closest Color Atlas shade palette, with the possibility to purchase a color sample instantly.
     
  • ‘Zero add-on’ formaldehyde finishing and coloring solutions
    Since January 1, 2016, formaldehyde is classified by ECHA5 as “may cause cancer” (Carc. 1B). Archroma offers a unique proposition combining: Fixapret® Resin WFF, a “zero add-on” formaldehyde anti-wrinkle finishing system and Helizarin® EcoSafe a “zero add-on”4 formaldehyde printing system. With Fixapret® Resin WFF, and Helizarin® EcoSafe, consumers can enjoy end-products that look good, whilst saving on precious resources and being gentler on the skin.
     
  • Sanitized® Odoractiv 10, active odor control function for polyester textiles
    Visitors at the booth will be able to experience a new unique dimension of odor control function for functional polyester textiles. The newly developed wash-resistant Sanitized® Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn.

Spotlight on automotive solutions
Having acquired a 75% stake in the M. Dohmen group, a specialist in textile dyes and chemicals for automotive, carpet and apparel, Archroma is now in the position to extend its offer in expert products and services. M. Dohmen will be present at the show at Booth A118.

Solution packages for sustainability
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.

More information:
Archroma
Source:

EMG PR

34th International Cotton Conference Bremen (c) BREMER BAUMWOLLBÖRSE
Opening of the Cotton Conference 2018
26.03.2018

34th International Cotton Conference Bremen

  • Deep Insights into the Multifaceted World of Cotton
  • Quality, Innovation and Digitalisation are Crucial

From the 21st to the 23rd of March, the international cotton industry came together in the historic Bremen Town Hall, under the motto "Cotton Insights". More than 500 participants from almost 40 countries came to exchange views on the latest trends in the natural raw material as part of the conference organised by the Bremen Cotton Exchange in cooperation with the Fibre Institute Bremen. The 34th International Cotton Conference provided a varied, in-depth programme which addressed the current and burning issues within the industry.

Summarising his visit to the conference, Kai Hughes, Executive Director of the International Cotton Advisory Committee (ICAC) in Washington said “The Bremen Cotton Conference is unique because it brings the diverse world of cotton together in one place. It is always a great opportunity to learn about the latest innovations, talk to cotton merchants and get an overview of the industry".

  • Deep Insights into the Multifaceted World of Cotton
  • Quality, Innovation and Digitalisation are Crucial

From the 21st to the 23rd of March, the international cotton industry came together in the historic Bremen Town Hall, under the motto "Cotton Insights". More than 500 participants from almost 40 countries came to exchange views on the latest trends in the natural raw material as part of the conference organised by the Bremen Cotton Exchange in cooperation with the Fibre Institute Bremen. The 34th International Cotton Conference provided a varied, in-depth programme which addressed the current and burning issues within the industry.

Summarising his visit to the conference, Kai Hughes, Executive Director of the International Cotton Advisory Committee (ICAC) in Washington said “The Bremen Cotton Conference is unique because it brings the diverse world of cotton together in one place. It is always a great opportunity to learn about the latest innovations, talk to cotton merchants and get an overview of the industry".

Sustainability and Cotton
This year, the conference developed into a whole week of diverse events around the entire cotton supply chain. With the “SUSTAIN” event, which was organised in cooperation with the Weser-Kurier newspaper, it was possible to build a bridge between the issue of sustainability and the end consumer.
With the focus on Africa, the emerging continent, which also has a special significance for cotton, became the centre of attention.

In his opening speech, Henning Hammer, President of the Bremen Cotton Exchange, made it clear that sustainability is also of great importance during the Cotton Conference: "The three pillars of sustainability – the environment, the economy and social issues – were already playing a role in the cotton industry when the word sustainability was far from being on everyone's lips.
Many changes that are being demanded in the sense of responsible agriculture and responsible trade take their time, many are already in the starting blocks and a lot already exists. We have a very alert, active agricultural research worldwide."

The Keynotes
The keynote session, moderated by the journalist Lisa Boekhoff from the newspaper Weser-Kurier, gave participants an overview, with an informative analysis of the current cotton situation. Kai Hughes, executive director of ICAC, emphasised in his keynote address the need to provide credible facts and figures which should be the basis for the entire supply chain. The marketing of cotton and changing consumer habits in a globalised and digitalised world were the subject of lectures by Mark Messura, Cotton Incorporated and Robert Antoshak, Olah Inc. Eugen Weinberg and Michael Alt from Commerzbank took a look at the raw material from a stock market perspective.

Traceability and Digitalisation
Digitalisation is also a cross-cutting issue that runs through the entire supply chain of the cotton industry. In his opening speech, Prof. Axel S. Hermann, Head of the Fibre Institute Bremen, emphasised the importance of digitalisation for the industry. “It enables new approaches in cotton cultivation and textile processing, but also influences consumer behaviour and thus the necessary changes in the textile industry.” The focus is on the status quo of the implementation, as well as the opportunities and risks of digitally controlled, vertically integrated procurement and sales processes and the associated challenges at retail level.

Another current topic is traceability, which is also closely linked to sustainability. More and more buyers want to know whether their suppliers are meeting the promised sustainability criteria for their products, also textile products. Consequently, the conference presented various techniques for testing the authenticity of a cotton provided in the finished textile, such as DNA testing, fingerprint analysis technique, marker methods and block-chain processes.

Cotton Quality
In addition to current subjects such as digitalisation and traceability, questions of cotton quality have traditionally been an essential element of the Cotton Conference, which was further reinforced this year with the "Spinners Seminar". The spinning mill seminar, which was carried out by the Cotton Exchange and the Fibre Institute in cooperation with the ITMF and IVGT associations, far exceeded expectations.

More than 70 participants discussed the handling of impurities in supplied cotton in the manufacturing process.
In addition, in a high-level expert session, there was an exchange of the latest research results which determine the future of cotton production and the processing of cotton into innovative products.

Source:

BREMER BAUMWOLLBÖRSE

TINTEX Presents “NATURALLY ADVANCED” Innovations © TINTEX
TINTEX Presents “NATURALLY ADVANCED” Innovations
19.12.2017

TINTEX Presents “NATURALLY ADVANCED” Innovations

TINTEX is pleased to present its latest fabric innovations at the above salons with a new range of more than 80 qualities and styles designed for the Sportswear, Athleisure, Fashion and Underwear market sectors. The collection focusses on three jersey fabric concepts: TIMELESS, FASHIONABLE & INNOVATIVE.

TINTEX is a modern industrial company based in the Porto region since 1998, producing market savvy fabrics for global designers and brands. TINTEX makes a truly sustainable range of precision, modern hybrid jersey fabrics that offer a better, Naturally Advanced choices to all its customers.

TINTEX is pleased to present its latest fabric innovations at the above salons with a new range of more than 80 qualities and styles designed for the Sportswear, Athleisure, Fashion and Underwear market sectors. The collection focusses on three jersey fabric concepts: TIMELESS, FASHIONABLE & INNOVATIVE.

TINTEX is a modern industrial company based in the Porto region since 1998, producing market savvy fabrics for global designers and brands. TINTEX makes a truly sustainable range of precision, modern hybrid jersey fabrics that offer a better, Naturally Advanced choices to all its customers.

The new ‘Naturally Advanced’ position means “advancing beautiful, organic and natural materials to the next level combined with unique, hybrid ‘nature-tech’ smarts, with advanced, added value and creativity, thanks to dedicated investments that serve and secure our customer demands both now and in the seasons to come” says CEO Mario Jorge. New innovations, which include the ISPO Best Product Award i (SOFT EQUIPMENT category) in TexTrends for fall winter 19/20, maintain and upgrade the honest but hi-tech sustainable organics that is at the heart of the TINTEX DNA to create better, smarter eco-materials, always with new levels of performance and hi-tech smarts, thanks to its expertise in specialist dyeing and finishing techniques, coatings and applications. These are all researched, designed and made using the latest equipment and processes. This season the new TINTEX collection plays with new colour balance techniques that deploy the benefits of chromotherapy for welbeing alongside skin safe materials and finishings.

The collection uses up to 90% of new smart and sustainable materials and include: Tencel, Modal & Micromodal, Organic Cottons, Supima cottons, Seacell fibres, Natural organic linens and the new, full colour ECOTEC® yarns by Marchi & Fildi, a smarter cotton made from pre-consumer clippings that in manufacture save up to 79% water. This season TINTEX is also introducing the new ECOTEC® yarn Phoenix (50% ECOTEC®, 50% recycled polyester, NM1/50 GRS-certified) for open, light and dry textures. Wellbeing credentials are guaranteed with Tessile e Salute certifications, TINTEX also presents new developments using the ROICA™ Eco Smart family of ecosustainable stretch yarns with certificated credentials. This family of yarns claim the world-first GRS certified ROICA™ premium stretch yarn that comes at least 50% from recycled pre-consumer waste.

The newest introduction for second skin qualities and for products to the athleisure market within TINTEX collection is ROICA™ Feel Good family that promises a new level of performance with ‘feelgood comfort’ and freshness.

For colouration effects, we can use the ROICA™ Colour Perfect family of yarns to create a flawless and responsible finish to dyed performance stretch assortments. Colours to Tranquilize, to Activate the Senses, to Recharge, to Energize.

Key highlights include: changeant effects (yarn and dyeing solutions), thermosensitive (reds/ blues) coatings, UV sensitive coatings and colourful coated patterns, extra fine and semi-transparent jerseys, but also, compact and fluid qualities.