From the Sector

• Carbios’ biorecycling and biodegradation technologies internationally recognized by consumers as promising answers to their top environmental concerns
• Carbios’ innovations considered one of the best for solving recycling effectively and achieving a real plastic circularity
• Consumer research including qualitative and quantitative fields was conducted between March and August 2022. The research institute, Strategic Research, conducted 6000 interviews in Europe and USA

Carbios’ biorecycling and biodegradation technologies acclaimed by consumers
During the first research field study, respondents were exposed to Carbios’ biorecycling process; a new enzyme-based biotechnology that enables biological recycling of all types of PET plastic waste (including bottles, packaging and textiles), and pushes the boundaries of recycling in terms of the number of cycles.

The research results demonstrated that European and US respondents find Carbios’ biorecycling technology more unique and innovative than traditional PET recycling (i.e. thermo-mechanical recycling), as well as more relevant in its ability to address their concerns and challenges regarding recycling.

In the second research study, conducted in the US, respondents were also exposed to Carbios’ biodegradation technology: an innovative enzymatic solution by which an enzyme is incorporated into plastics during the production process of bio-sourced PLA plastics (corn, sugar cane). This approach makes the material made from plants 100% compostable at ambient temperatures and degradable like plants with the built-in enzyme biologically breaking the bioplastic down in less than eight weeks without microplastics or toxic residues; creating a fully organic circularity.

Similarly to Carbios’ biorecycling technology, Carbios’ PLA biodegradation innovation caught US respondents’ attention with 64% overall liking it. Additionally, 93% of the respondents sampled described the concept as innovative, unique, easy to understand (49%), and believable (43%). Up to 82% of the most environmentally engaged respondents declared they would definitely buy more products made with Carbios’ fully circular biodegradable bioplastic.

Consumers: No other choice but to make plastic fully circular
The research says 99% of the respondents consider it important to protect the environment, while plastic pollution is now ranked the third most-concerning environmental issues after climate change and ocean pollution.

This awareness brings most of these consumers to be environmentally active when it comes to purchasing goods and sorting. For the US respondents, eco-friendly packaging comes in the fourth place in terms of purchase drivers for packaged goods and 65% of them declare sorting plastic from general waste on a regular basis, which makes plastic the most sorted type of waste.

Nevertheless, for a vast majority of the respondents across geographies, even if they would like to reduce their plastic consumption most of the time there is no suitable alternative that is as convenient, light, and cost-efficient as plastics. Hence in an ideal world, consumers would like all plastic waste in landfills and oceans to be collected, cleaned, reused and recycled.

The ecological and social conditions in the production of textiles are coming to the fore and into the consciousness of industry and end customers. With the new LAB102 brand, the "Jeans & Garment" team of the CHT Group to offer its global denim customers sustainable chemical solutions and technologies in the future.

Where does the name "LAB102 - Blue veins of CHT" come from?
LAB was chosen not only because the English word for laboratory fits perfectly with a chemical company, but also because it stands for innovation, development, and discovery. The digits 102 in the name refer to the house number of CHT's corporate headquarters in Tübingen.
The slogan "Blue veins of CHT" maintains the connection to the name CHT which is well-known in the industry. Moreover, the denim or jeans industry is traditionally and historically indigo - thus blue.

Focus on sustainability
LAB102 focuses not only on chemistry, but also on technology. Fogging, laser, and ozone technologies are innovations that currently enable new approaches in jeans and garment treatment and are at a high ecological level. Their use can lead to savings in water and energy. The use of chemicals can also be reduced if processes are optimized and adapted to the new requirements. To this end, the CHT Group's "Jeans & Garment" team works with the leading machine manufacturers on new developments.

Viscose speciality fibres manufacturer Kelheim Fibres partners with TextileGenesisTM, a traceability platform that creates radical transparency from fibre-to-retail and ensures authenticity d provenance of sustainable textiles against generics.

“Our wood-based fibres are an environmentally friendly basis for sustainable textiles - it's just that consumers often don't know what's behind their garments. But they need to know it’s in their hands to minimise the ecological footprint of the textile industry. Transparency and traceability are the foundation that enables consumers to make informed decisions.”, says Dr. Marina Crnoja-Cosic, Director New Business Development at Kelheim Fibres.

TextileGenesisTM uses blockchain technology to track and verify the use of sustainable fibres all the way from fibre to garment. A digital fibercoin ensures transparency and reliability throughout the entire production line and beyond.

Amit Gautam, Founder & CEO at TexileGenesisTM:"Fashion and textile value chain is undergoing major transformation driven by sustainable materials, shifting consumer demand for sustainable products, and increasingly stringent regulations on transparency. Great to see Kelheim moving the industry forward by actively participating in the traceability journey."

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 
“We are not immune to the global market context in which we operate. The supply chain issues stemming from the Covid-19 pandemic are still wreaking havoc, and the ongoing war in Ukraine has dealt a heavy blow to the global utility, commodity, and financial markets – and to us. We are satisfied with the progress at the site of our planned commercial-scale factory and the opening of the factory remains our key priority. The current, unstable market environment has highlighted the need for us to also accelerate efforts to simultaneously pursue other avenues for scaling production, with the ultimate aim of serving our customers in the best possible way in the long run,” said Infinited Fiber Company CEO and cofounder Petri Alava.
 
Infinited Fiber Company said in June that it planned to build a factory to produce Infinna™, a textile fiber that can be created 100% from cotton-rich textile waste, at the site of a discontinued paper mill in Kemi, Finland. The factory is expected to create around 270 jobs in the area and to have an annual production capacity of 30,000 metric tons, equivalent to the fiber needed for about 100 million T-shirts. The future factory’s customer-base includes several of the world’s leading apparel companies, with most of the future production capacity already sold out for several years.
 
Since June, Infinited Fiber Company has advanced the site-specific basic engineering, recruitment planning, vendor selection, and permit processes according to plan. The limited component availability caused by the continuing impacts of the Covid-19 pandemic and the war in Ukraine have, however, prolonged significantly the delivery times for some of the key equipment and machinery needed for the factory. As a result of these developments, Infinited Fiber Company has re-evaluated its overall factory project timeline. The first commercial fiber deliveries from Kemi are now expected to begin in January 2026. The scope of the project remains unchanged and construction work at the site is expected begin during 2023 as previously communicated.
 
In addition, the European energy crisis sparked by the war in Ukraine has caused the electricity prices in Finland to roughly triple, and the prices of some of the key chemicals needed in the fiber regeneration process have risen by some 200-300% since the start of the war.
 
“We of course don’t have a crystal ball. But according to our advisors and other experts, utility and commodity prices are forecast to normalize before 2026, when we now expect the first commercial fiber deliveries from Kemi to be shipped. In addition to the likely normalization of the market, the extended timeline enables us to undertake the necessary measures to develop the profitability of the future factory. The growing demand for Infinna™, despite the general turbulence, is an encouraging and clear indication of the fashion industry’s commitment to circularity,” said Petri Alava.

DiloGroup will be attenting India ITME 2022 (December 8 – 13, 2022), an exhibition for the textile industry, which offers a central forum for dialogue within the textile production sector, including textile machine building, fibre production, ancillaries and accessories. For DiloGroup this event is a good oppportunity to inform customers and interested parties about new developments aimed at improving production technologies with a focus on needlefelts.

Focal points of the development work are:

1. Intense Needling:
   The development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
2. “Fibre Pulp Recycling”
   Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
   When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
3. Additive nonwoven production
   The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses. It is also suited for uses in the sector of apparel and shoe production.
4. “IsoFeed”-card feeding
   In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.

Perstorp has been acquired by PETRONAS Chemicals Group Berhad (PCG), Malaysia´s leading integrated chemicals provider and part of PETRONAS Group, on 11 October 2022.

In May this year, PCG signed a Securities Purchase Agreement with Financière Forêt S.à.r.l, a company under PAI Partners, a European private equity firm, to acquire the entire equity interest in Perstorp, a leading sustainability-driven global specialty chemicals company based in Sweden. With the completion of the acquisition, Perstorp is now PCG’s wholly-owned subsidiary.

PCG will strive to ensure the timely completion of Perstorp’s growth projects in a safe and cost-effective manner. Perstorp has several projects lined up in the near future, including the launch of Project Air which aims to reduce carbon emissions through the production of sustainable methanol. Recently, The European Union Innovation Fund selected Project Air, as one of the 17 large-scale green tech projects, which together will be granted more than EUR 1.8 billion. Project Air is a gamechanger for the chemical industry, moving from fossil raw materials to recycled and bio-based feedstock, thereby enabling sustainable chemical products to a large variety of industries and end products. At full capacity, it will reduce global CO2 emissions with close to 500,000 metric tons per year from today’s levels, corresponding to one percent of current emissions in Sweden.

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

HydroView
The HydroView hydrostatic head tester is meanwhile designed to measure the penetration of water in materials which have an end use that requires water resistance, such as those in the medical, geotextiles and nonwovens sectors. It is also proving essential in the testing of end-use applications for technical textiles, such as in protective gloves, diving dry suits and winter sports apparel, to fishing waders, roofing, tenting, ground sheets and more.

BTMA member Sellers Textile Engineers is marking its 110th anniversary this year with the introduction of a new concept in carpet shearing, as the essential final step in ensuring tuft uniformity and ‘just new’ freshness in finished carpet rolls.

The company has for many years offered two options in the construction of its shearing cylinders – the first, namely the ‘strap-on’, incorporates spiral blades bolted to the cylinder body and the second, known as the ‘caulked-in’, includes spirals which are fixed very securely in a machined groove within the machine.

The new Sellers’ Hybrid Shearing Cylinder combines the benefits of both, resulting in an improved cut and finer finish, in addition to longer repeatable finishing and increased rigidity.

“The Hybrid Shearing Cylinder has all the advantages of the ‘strap-on’ spiral blade to provide a sharper and cleaner cut, along with enhanced rigidity which significantly lengthens the intervals between the necessary regrinding of the blade,” explains Sellers Director Neil Miller. “We currently have six Hybrid Shearing Cylinders operating in the field and the earliest, which has been installed in both No1 Head position, where the majority of the shearing operation and heaviest cut is performed, and also in No3 Head, where the sharper cutting angle has resulted in a much improved surface quality.”

Sellers shearing machines have led the field in carpet finishing for many decades, enabling the leading manufacturers to stay competitive by enabling the highest quality of finish to be achieved economically and efficiently.

The latest advanced features of these machines include a load cell tension control drive system, an automated touchscreen for easy operator control and fault diagnosis, an enhanced cleaning system including cylinder and blade separation and fully controllable pivoting beds. Further options include thickness monitoring, seam detection and metal detection systems.

“The Hybrid Shearing Cylinder will become standard on our latest machines and also be made available for retrofitting, to provide significant benefits to our existing users,” says Miller. “All of our equipment is designed, manufactured, assembled and tested at our plant in the UK, and as one of the few remaining European engineering companies to make all of our components in-house – with now over a century of accumulated know-how – flexibility in design allows our finishing solutions to be targeted to specific customers and their product requirements. Aligned to this is a lead in process control systems which ensure the accurate control, reliability and repeatability of the processing parameters on all of our machines.”

Sellers remains committed to providing complete finishing solutions for all carpet, tile and artificial grass products. Its range includes machines for tufted secondary backing, both conventional, powder and extrusion lamination, Wilton and Axminster products, artificial grass and foam lines, coating lines for bitumen, PVC, PU and other polymers, as well as shearing for all carpet products.

Ongoing developments on the company’s coating and drying lines have resulted in improved guiding and product tension control as well as dryer efficiency, reducing heat loss and optimising energy use. These include a re-design of the fan pressure boxes and impingement nozzles to increase airflow efficiency, modulating gas burners and introducing easy clean, accessible filters.

In addition, the proven dual zone system has been enhanced, giving a temperature differential of up to 80°C between top and bottom zones. Dryers can be heated by either gas or steam and operation and access have been simplified with controls via touchscreen and PLC.

An extensive range of ancillary equipment is available to provide maximum flexibility to cover product requirements, for both new processing lines and as upgrades to existing equipment.

“Carpet manufacturing is now based on well-established, tried and trusted processes and it’s rare for new innovations to be introduced into this sector,” says Jason Kent, CEO of the British Textile Machinery Association. “The new Sellers Hybrid Shearing Cylinder can provide a competitive edge for manufacturers which is currently being proven in the field. It’s one of a number of new innovations the company is planning to showcase at next year’s ITMA exhibition in Milan.”

AkzoNobel provides a Q3 update as high macro-economic uncertainty - especially in Europe and China - led to near historical low consumer confidence. In anticipation, customers and channel partners in the paints and coatings industry are proactively destocking in these regions.
 
The Q3 adjusted operating income is now expected to be in the range of €195 million to €215 million (2021: €241 million), excluding a retroactive impact from hyperinflation accounting regarding Türkiye.
 
Current demand trends are expected to continue in Q4, whilst benefits will come from the company’s own initiatives to reduce costs, improve working capital and ongoing pricing initiatives. While Q3 will see the highest raw material cost impact since the inflation cycle started early 2021, pricing will continue to offset raw material and freight inflation. Overall raw material supply is normalizing and raw material prices are starting to soften broadly.
 
Financial results for Q3 of 2022 will be announced on October 20.

HeiQ will showcase some of its latest technologies at the Taipei Innovative Textile Application Show – TITAS 2022, from the 12th to the 14th of October, at the Taipei Nangang Exhibition Center. A newly launched, upgraded formula - HeiQ Barrier Eco Dry New, is added to the company’s fluorocarbon-free water repellent technology range and will be one of the highlights.

As urbanization and modern lifestyles cause an estimated 40% of the global population to be afflicted by allergies, HeiQ recently launched HeiQ Allergen Tech, a finish based on bio-based synbiotic technology to combat inanimate allergens on textiles. It will also be introduced at TITAS.

HeiQ innovations driving change
The global call for sustainability has put the textile industry, as the second-highest generator of CO₂ emissions, under the spotlight. Most of the marine pollution is caused by non-degradable micro-and nanoparticle emissions from washing clothes, and tons of textile items pile up in landfills. Clothing a potential 8Bn global population by 2023 doesn’t have to be a problem, and HeiQ is driving change in the textile industry so that every player can be part of the solution. In response to the ongoing energy crisis, HeiQ will emphasize the use of HeiQ Clean Tech, a polyester dyeing auxiliary system that helps mills save energy by 30-35%, thereby reducing the carbon footprint of the finished product.