From the Sector

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

Fully on track strategically
The Managing Board of Lenzing AG presented the business development of the year 2020, a strategic outlook and sustainability strategy including the relevant roadmap to achieve climate targets to the participating shareholders. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by the year 2030. The goal is to operate in a climate-neutral manner by 2050.

The substantial investments made in Thailand and Brazil not only support Lenzing in its transformation to a supplier of environmentally compatible specialty fibers but also comprise an important milestone on this journey which sustainably increases the company’s enterprise value.

The implementation of these two key projects is proceeding ahead as planned in spite of the direct impacts of the coronavirus crisis. The pulp plant in Brazil is scheduled to be put into operation in the first half of 2022 and will significantly increase Lenzing’s own in-house supply of dissolving pulp. Production in Thailand is expected to commence towards the end of 2021, further raising the share of eco-friendly specialty fibers in the Lenzing product portfolio.

New appointments to the Supervisory Board
Dr. Veit Sorger retired from the Supervisory Board of Lenzing AG on his request effective at the end of the Annual General Meeting. Veit Sorger had been a Member of the Supervisory Board since 2004 (also serving as Deputy Chairman since 2011) and served on various Supervisory Board committees.

The Annual General Meeting elected Dr. Markus Fürst, Managing Director of B&C Industrieholding GmbH, and Thomas Cord Prinzhorn, MBA, CEO of Prinzhorn Holding GmbH, to serve on the Supervisory Board until the end of the Annual General Meeting resolving upon the discharge of the Supervisory Board members for the business year 2024.

Reflecting the pandemic-related drop in worldwide vehicle production, Autoneum’s revenue in local currencies fell by –18.7% in 2020, although the second half of the year saw a significant market recovery. Group revenue in Swiss francs fell by –24.2% year-on-year to CHF 1 740.6 million. For the full year 2020, the EBIT margin will be around 1.5% and the free cash flow slightly over CHF 100 million.
At the Annual General Meeting on March 25, 2021, the Board of Directors will propose Liane Hirner and Oliver Streuli for election to the Board of Directors of Autoneum Holding. Peter Spuhler will not stand for re-election.

At 74.5 million, the number of light vehicles produced globally in 2020 was down –16.2% compared to the previous year, where around 89 million vehicles were manufactured. Autoneum’s revenue in local currencies decreased by –18.7% in 2020, pretty much in line with the negative market dynamics. The somewhat stronger decline of revenue compared to the market results from a lower share of Asia in Autoneum's total revenue. Impacted by the appreciation of the Swiss franc against the most important currencies for Autoneum, the consolidated revenue dropped in 2020 by –24.2% to CHF 1 740.6 million. The heterogeneous development of the first and second half of the year was characteristic for the pandemic-driven automotive year 2020. Worldwide lockdowns and production stoppages at vehicle manufacturers led to a market slump in the first six months and a corresponding loss in revenue for Autoneum. Thanks to the subsequent market recovery and catch-up effects in the second half of the year, revenue improved considerably compared to the first half of the year.

Revenue development in Asia and SAMEA region significantly better than market
While revenues in local currencies of the highest-volume Business Groups Europe and North America decreased by –25.6% and –19.3% respectively, reflecting the regional, pandemic-driven market development (Europe: –22.9%; North America: –20.1%), Business Group Asia almost held its prior-year level with an organic decline of only –2.1% in 2020 thanks to the strong upturn in automobile production in China in the second half of the year and despite the fact that the number of vehicles produced in Asia fell by –11.4%.*

Personnel changes to the Board of Directors
At the Annual General Meeting on March 25, 2021, the Board of Directors of Autoneum Holding will propose Liane Hirner and Oliver Streuli for election as new members of the Board of Directors.
Liane Hirner has been CFO and member of the Management Board of Vienna Insurance Group, based in Vienna, Austria, since 2018.*

Oliver Streuli, a Swiss national, has been CEO of PCS Holding, based in Frauenfeld (Canton Thurgau), Switzerland, since 2019.*

Peter Spuhler has been a member of the Board of Directors of Autoneum since 2011 and will not stand for re-election at the Annual General Meeting on March 25, 2021.*

*See attached document for further informationen

• Carbon fibers combined with injection molding replace conventional steel construction
• SGL Carbon supplies innovative carbon fiber profiles
• Serial use in a future high-volume model of BMW Group
• Construction method offers great potential for use in other automotive projects

Already in August, SGL Carbon received a multi-year order from Koller Kunststofftechnik GmbH for the production of novel carbon fiber profiles for serial use in windshields for a future high-volume model of BMW Group.

The profiles are particularly flexible fiber tows, pre-impregnated with thermoplastic resin in various dimensions. They will be compiled by SGL Carbon on the basis of its own 50k carbon fiber at its site in Innkreis, Austria, and subsequently processed by the injection molding experts at Koller to form a skeletal plastic component. The composite component will replace the previous steel-based windshield. Production of the carbon fiber profiles will start in the remainder of 2020 and will then be ramped up gradually over the next few years for the BMW Group model launch.

In the vehicle, the windshield is a connecting element between the roof frames and thus has an important stabilizing function. The carbon fiber profiles add the required stiffness and crash safety to the component. At the same time, they help to significantly reduce the weight of the roof and thus also support the driving dynamics. The injection molding process also enables particularly complex and material-efficient structures. In the BMW Group model, this innovative component concept will cut weight by 40 percent compared to conventional steel designs of the component while creating important space for cable ducts and sensors.

The production of the carbon fiber profiles themselves is also particularly geared to material and process efficiency in large-scale production. The profiles consist of several smaller fiber strands, the so-called rods, and are manufactured using the modern continuous pultrusion process. During product and process development it was one key objective to ensure that material loss during production is almost completely avoided.

"At SGL Carbon, we have been working on the development of thermoplastic carbon fiber profiles for use in injection molding for some time already. This development work is now beginning to pay off. Due to the many advantages and competitive costs, we see a great potential for the technology to be used in other automotive projects too," explains Sebastian Grasser, Head of the Automotive Segment in the Business Unit Composites - Fibers & Materials at SGL Carbon.

"Innovative lightweight construction with hybrid designs has developed into a strategically conclusive concept for Koller Group's OEM customers," confirms Max Koller, CEO of Koller Group. "SGL Carbon's high level of material expertise, combined with the process know-how of KOLLER Kunststofftechnik and KOLLER Formenbau, create the basis for a promising future in innovative lightweight construction technologies. With this order, the BMW Group has confirmed its confidence in the successful cooperation between SGL and Koller; we are particularly pleased about this", said Max Koller.
 
The Koller Group is a globally operating technology company with plants in Europe and China, as well as NAFTA. The Koller Group develops and manufactures lightweight construction, tools and serial components, primarily for the automotive industry.

• On October, 20th, 2020, the State Prize for Innovation was awarded to the Lenzing Group for their LENZING™ Web Technology.
• Lenzing thus received the highest award for particularly innovative achievements in Austria.

Lenzing – On Tuesday, October 20, 2020, the Lenzing Group was awarded the coveted “State Prize for Innovation”. Lenzing emerged as the winner with its project LENZING™ Web Technology and thus received the highest recognition for particularly innovative achievements in Austria. The novel process combines fiber and nonwovens production in only one step, setting new standards in terms of efficiency, circularity and ecological sustainability. Margarete Schramböck, Federal Minister for Digital and Economic Affairs, presented the award to Gert Kroner, Vice President Global Research & Development.

“This award is a great recognition of our work. Our goal is to grow continuously with sustainable innovations and to look beyond our fibers, to the needs of our customers and partners and to the needs of consumers worldwide. With the LENZING™ Web Technology we have created an exciting and promising solution for eco-friendly products in line with our corporate strategy sCore TEN and support consumers in their daily needs in a sustainable way”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group.

Biodegradable nonwovens for a clean environment

The pollution of the environment by plastics is one of the most urgent problems of our time. Every day, millions of hygiene products and wipes around the globe end up in garbage and sewage. Most of them consist of up to 80 percent polyester or other fossil, non-biodegradable materials and therefore pollute the environment. With the LENZING™ Web Technology, Lenzing has developed a patented technology to counter this problem: Sustainable and eco-friendly nonwovens are produced from the renewable raw material wood. These are not only plastic-free, they also score points for their particularly high environmental friendliness. “Thanks to a unique self-bonding mechanism, in which the filaments bond with each other during the spinning process, binders, which are found in many nonwovens, are no longer needed. As a result, the nonwovens produced with LENZING™ Web Technology are 100 percent biodegradable and do not pollute either humans or the environment”, says Gert Kroner, Vice President Global Research & Development of the Lenzing Group.

The Austrian State Prize for Innovation is awarded annually by the Federal Ministry for Digital and Economic Affairs to the most innovative Austrian company. In 2020, the competition took place for the 40th time.

• The Lenzing Group was the first Austrian company to send goods 100 percent “Made in Austria” by train directly to China.
• The train loaded with TENCEL™ fibers reached Xinzhu station in Xi'an on September 05.

Xi’an, China – The Lenzing Group is breaking new ground due to the short-term increase in demand for sustainably produced fibers from Chinese customers. For the first time, the company delivered wood-based cellulosic fibers, which are produced at the Austrian sites in Lenzing and Heiligenkreuz, directly to China by train. Thanks to this new transport route, Lenzing is able to meet the urgent demand of its Chinese customers twice as quickly as by the usual sea freight.

The first complete train with goods 100 percent “Made in Austria” started on August 20 in the presence of Leonore Gewessler, Federal Minister for Climate Action, Environment, Energy, Mobility, Innovation and Technology, His Excellency Xiaosi Li, Ambassador of the People's Republic of China in Austria, Stefan Doboczky, Chief Executive Officer of the Lenzing Group, Thomas Kargl, Board Member of the ÖBB Rail Cargo Group, Erwin Cootjans, Chief Executive Officer of Nunner Logistics, and Erich Hampel, Chairman of the Board of the B&C Private Foundation, at the Vienna South Terminal and reached his destination on September 05 at the Xinzhu train station in Xi'an, China. The train loaded with 41 containers with TENCEL™ branded lyocell and modal fibers and a total value of EUR 1.8 mn, passed a total of 10,460 km in seven countries: Austria, the Czech Republic, Poland, Belarus, Russia, Kazakhstan and China.

The first Lenzing fiber train was received in a grand ceremony on Tuesday, September 08 at the container terminal in Xi'an. Numerous guests, including the Austrian ambassador to China, Friedrich Stift, representatives of the Xi'an Municipal Government, the China Railway Xi'an Group, the Xi'an International Trade & Logistics Park as well as representatives of the Lenzing Group, the China National Textile and Apparel Council, Lenzing customers and the media attended the ceremony.

In his speech, Friedrich Stift, Austrian ambassador to China, emphasizes the importance of international trade and sustainable development: “The delivery of Austrian-made products through the CHINA RAILWAY Express adheres to the sustainable concept of Lenzing. Since China and Austria signed the bilateral railway cooperation agreement in 1994, the two countries have maintained good cooperation in the railway field and will continue to do so in the future. China is Austria's largest partner in Asia, and it is believed that after the outbreak of the corona crisis bilateral trade will normalize in 2021.”

“This is the first time for the Lenzing Group to deliver Austrian-made TENCEL™ branded fibers directly to Chinese customers. The Silk Road has been a main transport route between Europe and Asia since ancient times. Chinese consumers affectionately call TENCEL™ fibers ‘Silk from Heaven’. The China-Europe Express can reduce the transport time between Europe and China by half, thus meeting Chinese customer’s demand for environmentally friendly fibers more quickly”, states Hu Jian, Senior Vice President of the Lenzing Group for North Asia.

• The quality of Sappi’s Algro Design Advanced solid bleached board makes the difference for Wolford

The unique combination of physical and optical features combined within the Algro Design range of products, convinced the textile manufacturer, Wolford, to use the range to package its innovative face mask. When creating the packaging solution for its ‘Care Mask’ the company chose to combine the premium 350 gsm Algro Design Advanced solid bleached board with extremely challenging ink covering and a number of finishing options. The end result is a packaging solution that is as elegant as it is creative and as a result, perfectly complements the product inside.

• Premium packaging for premium products
• Perfect for complex graphic applications
• Unique service from the innovation leader Sappi

Wolford, founded in Bregenz, Austria, in 1950, is the global market leader in skinwear ‘made in Europe’. Since its establishment, the company has come up with numerous product innovations and is always at the cutting edge. Even before the coronavirus pandemic hit Europe, product developers were considering the idea of launching their own face mask protection, having witnessed the effects of the coronavirus SARS-CoV-2 in Asia. Thanks to an outstanding, highly efficient development division, a new product, ‘Care Mask’, was quickly brought to market.

It meets the high-quality standards of Wolford and consists of a premium, soft, breathable material that ensures high wearing comfort. Wolford is particularly proud that such a high-quality product could be developed in just a few weeks, despite reduced working hours and staff working from home. It generally takes some time to progress from development to product maturity. In this case however, everything was ready for market launch within two weeks.

Top quality meets top quality

Alongside the product, Wolford developed an appropriate packaging solution for their high-quality product, in collaboration with their in-house graphics department. To enable the ‘Care Mask’ to be quickly launched, a suitable material needed to be found, which could meet Wolford’s high standards in terms of quality, appearance and feel.
 
Wolford’s long-term partner, Sappi Europe had the perfect solution right away with its 350 g/m2 Algro Design Advanced solid bleached board. Thanks to its double-coated top and lightly coated back, the material from the innovation leader is a perfect choice for premium packaging.

The high brightness and silky, soft touch of the paperboard gives the packaging a premium, exclusive look and feel. The colour brilliance of Algro Design Advanced and the continuous, precise reproduction of complex print motifs were exactly what Wolford was looking for and met the high standards of the brand. Thanks to its additional outstanding finishing and processing properties, further processing with grooves, hot-foil embossing, paint finishes and adhesives was also easily achievable, which made it perfect for Wolford’s needs.

Service comes first at Sappi

Product capability alone was not enough for this venture however. To allow Wolford to achieve their goal of two weeks from inception to market ready, they also required a highly responsive service level from their trusted partner and Sappi responded at every level.  From selecting the right quality and size to the precise delivery of the paperboard to the printers, all in the space of five days, Sappi was flexible and immediately ready to respond. Thanks in no small part to the proactive support provided by all contributors to the creative process, the ‘Care Mask’ was launched at the end of March 2020 and was a resounding success. 5,000 masks were sold out within an hour and were sent on their way to the customers in their exclusive packaging.

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

• Schleswig-Holstein Minister President visits Neumünster, Germany

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at the Oerlikon Nonwoven business unit of the Swiss Oerlikon Group. From the manufacturing site in Neumünster, Germany, the high-tech meltblown systems – with their patented ecuTE+ nonwovens electro-charging technology – are meanwhile be exported all over the world. For the very first time, a contract has now been signed with a business in Australia. Today, Schleswig-Holstein’s Minister President Daniel Günther was won over on site by the technology of a ‘global player’. Rainer Straub, Head of Oerlikon Nonwoven, was thrilled, stating: “The machines and systems for manufacturing manmade fiber and nonwovens solutions from Neumünster enjoy an outstanding reputation throughout the world. It is especially in this crisis that the technology from Schleswig-Holstein has proven itself to be absolutely world-class.”

In addition to a tour of the meltblown system and its assembly and production facilities, the visit by Minister President Daniel Günther had one purpose above all: the dialog between politicians and business. Rainer Straub, Head of Oerlikon Nonwoven, and Matthias Pilz, Head of Oerlikon Neumag, jointly expressed their thanks for the support that Oerlikon has repeatedly had the fortune to experience over the past months and years in Schleswig-Holstein and looked to the future full of hope. “As a result of our additional investment at the site here in Neumünster – be this in our new technology center that will be completed by the end of this year or in our new logistics center that is already operating – we, as one of the region’s largest employers, are continuing to move forward, supported by a State Government that is also focusing on both promoting industry and business and on advancing an efficient training and educational system, as innovation is only possible with outstanding engineers”, stated Matthias Pilz. And Rainer Straub directed his appeal specifically at the Minister President: “Treat education and training as a priority. Ultimately, they will secure the future of Schleswig-Holstein as a center of excellence and manufacturing!”

Five-million-euro digitalization program

Daniel Günther, the incumbent Minister President of Schleswig-Holstein since 2017, immediately responded, making reference to one of the Federal State’s current training initiatives: “The State Government is supporting higher education institutions and students in the present coronavirus crisis. With a five-million-euro digitalization program, we are investing on the long-term digitalization of our higher education institutions. With this, we are overall creating a future for young people, particularly also for those who could very well go on to invent the next generation of manmade fiber systems.” And the Minister President was just as impressed by the willingness and readiness with which Oerlikon has been providing high-level support since the beginning of the COVID-19 pandemic to master the present challenges as he was with the company’s meltblown technology itself. Rainer Straub explained: “When, at the beginning of the pandemic in February, demand for protective face masks increased rapidly, we at Oerlikon Nonwoven responded immediately. We ramped up all the available production capacities here in Neumünster in order to quickly manufacture nonwovens for producing face masks using our laboratory systems. As a result, we have been able to make a small, regional contribution to covering demand. In parallel, we have pulled out all the stops in order to systematically further expand our skills as machine and system builders so as to cater to the initially expected, and now also continuing, global demand for meltblown systems as quickly as possible.”

Leading meltblown technology

The Oerlikon Nonwoven meltblown technology – with which nonwovens for protective masks can also be manufactured, among other things – is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from plastic fibers. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Ever more manufacturers in the most diverse countries are hoping to become independent of imports. Therefore, what we are experiencing in Germany is also happening in both industrialized and emerging countries throughout the world”, commented Rainer Straub. In addition to China, Turkey, the United Kingdom, South Korea, Austria and numerous countries in both North and South America, Australia and not least Germany will for the first time also be among the countries to which Oerlikon Nonwoven will be delivering machines and equipment before the end of 2021.

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

The demand for high-quality MNS and respiratory masks for medical personnel is increasing rapidly, and there is real competition on the international market for these products. In order to sustainably secure domestic supply now and in the future and to strengthen the business location, the two companies Lenzing AG and Palmers Textil AG have now set a milestone with their own competence center for hygiene based in Austria.

Hygiene Austria LP GmbH thus makes a significant contribution to combating the Covid-19 pandemic and ensures the long-term supply of these critical goods in Austria in high quality.

As of October 1st, 2019, the Netherlands-based global market leading manufacturer of advanced automation equipment and solutions for composites, Airborne, strengthens its activities particularly in German speaking countries, the so-called D-A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC. The Dutch company is looking for specialised partnerships to develop and deepen its international business opportunities in the aerospace and automotive markets.

Airborne’s focus is on high-end composite components, at high production rates at radically low conversion costs. Airborne is building up a suite of automated solutions for the manufacturing of composites with the aim to radically reduce costs and touch labour, minimize the footprint and use of material, and improve the time to market for their clients. The company offers i.a. solutions in automated honeycomb potting, automated kitting and automated lamination of thermosets and thermoplastics. In order to develop new business opportunities in the D-A-CH region for the end-markets aerospace and automotive, Airborne is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Dr. Effing, CEO of AMAC GmbH confirms: "As a first step for the establishment of Airborne on the German market, we just signed their membership at AZL in Aachen which will help to connect with over 80 companies and latest research developments. In the framework of theirstrategy to strengthen the supply to the aircraft sector, Airborne will also exhibit at the Aircraft Interiors Expo in Hamburg from March 31st to April 2nd 2020.”