From the Sector

March 2019: For decades, Schoeller Textil has been meticulous in observing its responsibility to humans and the environment. Developed and produced in Switzerland under the most stringent conditions, the high-tech textiles and textile technologies encompass a spirit of innovative and outstanding quality. With a focus on sustainability, the groundbreaking, ecological portfolio includes, among other things, genuine upcycled products with ECONYL®-Garn, 100 % recycled, recyclable wear2wear woven and knitted fabrics or bio technologies based on sustainable raw materials.

High-quality textiles have a long service life and can remain in use for longer. The fabric properties are further improved by smart textile technologies such as water- and dirt-repelling functions. This helps preserve the environment and cuts down on the use of resources. In its manufacturing, Schoeller Textil AG always considers the ecological compatibility of its products. Therefore, since 2001, production at the Swiss site has always complied with the stringent guidelines of the bluesign® system. By conviction, Schoeller devotes itself to sustainable climate protection and takes part in the Energy Agency of the Swiss Private Sector programme to actively reduce carbon emissions and optimise energy efficiency.

Techtextil 2019: Schoeller launches its new finishing technology called NanoSphere® Plus. The special effect of this new development is its protection against fingerprints and greasy stains. Furthermore, even after being absorbed by the fabric stains are quickly and easily wiped away without washing.

Every human being leaves its marks. In particular, on daily-use items that are picked up or touched often. Especially on textile surfaces, hand and fingerprints in combination with dirt and dust particles leave an unpleasant, greasy dirt film, which is very difficult to clean.

NanoSphere® Plus, developed by Schoeller Technologies AG, the business unit for technologies at Schoeller Textil AG, works on the basis of a functional chain. Textiles are equipped with a matrix finish to reduce the capillary effect in the textile’s fibers. Especially unpleasant sebum residues and dirt that are often released by finger and handprints are less absorbed by the fabric and can be easily wiped away.

Beside the excellent protection against finger and handprints, textiles with NanoSphere® Plus are additionally water and oil repellent, abrasion resistant and extremely durable. The finishing technology rarely affects the look or feel of the fabric.

Non-washable textiles that are often touched by hands or fingers, or fabrics that are in direct contact with the skin benefit most from this new technology. Therefore, NanoSphere® Plus is ideal for woven fabrics and synthetic leather or synthetic suede for bags, covers of electronical devices, head phones, loud speakers or other items in the field of interior equipment.

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

C-WEAVE™ - THE QUALITY AND RELIABILITY BENCHMARK
In just a few years, prepreggers have come to consider Chomarat's C-WEAVE™ carbon-fibre fabrics as a benchmark for surface-finish quality and processability.
The reinforcement contributes to productivity and reliability during the prepregging process. Helen Doughty, Director at SHD Composites, testifies: “The consistent high quality of C-WEAVE™ has been a key part of SHD Composite Materials continued success and growth.”
"Prepreg users often manufacture Class A surface parts for demanding applications, and they need excellence and reproducibility," explains Chomarat’s Prepreg Market Manager Ulrike Salmon.

C-PLY™: GOING FURTHER WITH CARBON MULTIAXIALS
The advantages of multi-axial reinforcements are now well established - oriented axes, absence of resin-rich areas allowing a high fibre content, and improved mechanical tensile and/or bending performance thanks to the non-crimp fibres.
By developing its C-PLY™ range, Chomarat further demonstrates that multiaxials are a real asset in terms of performance and appearance. "Chomarat strives to minimize marking on parts and to optimize surface quality through fibre spreading and the use of suitable stitches. C-PLY™ can also integrate aesthetic functions by using the assembly seam as a graphic design", continues Ulrike Salmon.
These new advantages are important for the automotive, sports-equipment and consumer-electronics markets, which seek to combine premium quality and productivity.

• Oerlikon presents its expanded nonwovens product portfolio at the IDEA 2019 in Miami

Neumünster – Oerlikon presents its complete nonwoven plant portfolio for the production of airlaid, meltblown, spunbonded and hybrid materials at this year’s IDEA in Miami from 25–28 March. The focus of its presentation will be on solutions for hygiene, medical and other disposable nonwovens. Visitors to this year’s IDEA can inform themselves on the wide range of products at Oerlikon’s exhibition stand (no. 1724).

Two strong partnerships for disposable nonwovens

While two years ago the Nonwoven business unit of the Oerlikon Manmade Fibers segment focused almost exclusively on solutions for technical applications, the company has now expanded its product portfolio to include solutions for disposable nonwovens by establishing strong partnerships.

Oerlikon & Teknoweb Materials – two strong partners for the nonwoven industry

As early as spring 2017, Oerlikon Manmade Fibers' Nonwoven business unit had entered into a strategic partnership with the Italian company Teknoweb Materials. Teknoweb Materials is an established technology supplier in the field of wipes and other disposable nonwovens. With its LEVRA technology, the company has its own patented, particularly efficient manufacturing process for wipes. It also has extensive process know-how on the making and further processing of these nonwoven materials. The Nonwoven business unit of Oerlikon’s Manmade Fibers segment completes this partnership with its well-established machine and plant solutions. Teknoweb Materials will also be represented at IDEA at the Oerlikon exhibition stand (no. 1724).

Cooperation with Shaoyang Textile Machinery

For spunmelt systems solutions for hygiene and medical applications, Oerlikon has been in cooperation with the Chinese machine and plant manufacturer Shaoyang Textile Machinery since Autumn of last year. The goal of these cooperation partners is to advance the international marketing of spunmelt plants outside of China. Oerlikon Manmade Fibers’ Nonwoven business unit contributes its plant engineering know-how and is responsible for product and process guarantees. Oerlikon also assumes the overall project responsibility as well as world-wide customer service outside of China. In return, Shaoyang, with its headquarters in the city of the same name in the Hunan province, supplies the plant technologies.The advantage for the customer: competitive solutions at an attractive price level with comparatively low investments.

• Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
• Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
• UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

Using UltraBond manufacturers finally gain the potential to cost-efficiently produce 100% recyclable carpets. In addition to the general benefits of making recycled PP available for the plastics production chain and reduced waste generation, environmental advantages and financial savings arise from a total lack of water and less energy use. As a 100% dry process, thermal bonding uses no water and results in a total absence of waste water. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint.

The sustainability benefits are quantified through lifecycle analysis (LCA) of an exhibition carpet application – among the primary applications for needlepunch carpets. Evaluations show that the absence of water consumption directly translates into a large energy saving of 93% when using UltraBond compared to a latex bonding solution, and also a potential annual water saving of over 20 million litres for 100 million m2 of exhibition applications in the EU. Without the addition of any other bonding agent, CO2 emissions are reduced by 35% over the full production process.

Karena Cancilleri, Vice President Beaulieu Engineered Products, Beaulieu International Group, commented, “Recyclability and achieving a greener, more cost-effective production process without compromising on current performance levels are significant unsolved topics within today’s carpet industry. By eliminating the need for latex and chemical binders through UltraBond, we offer needlepunch manufacturers a breakthrough they have been looking for that boosts environmental and economic sustainability. We see textile flooring as just the beginning. Together with our customers, we look forward to exploring the potential of this unique thermal bonding fibre in other applications such as laminated nonwovens or as an alternative to dry powders.”

Discover more about UltraBond from the Beaulieu Fibres International team at Stand B56 Hall 11, Domotex 2019 in Hannover, Germany from January 11-14, 2019.

Decline in revenue due to lower prices for standard viscose, less favorable currencies and lower production volume

• Pressure on prices for key raw materials remains high
• Positive impact due to focus on specialty fibers and further optimization of the product mix
• Expansion project in Mobile temporarily mothballed
• Acquisition of the remaining 30 percent of Lenzing (Nanjing) Fibers Co. Ltd.

The Lenzing Group recorded a solid business development in the first three quarters of 2018. The decline in revenue and earnings compared with the same period of the previous year was essentially based on a mix of lower prices for standard viscose, more unfavorable exchange rates and price increases for key raw materials. The Lenzing Group’s strategic orientation with a focus on specialty fibers had a positive impact in this environment.

Revenue decreased by 5.2 percent to EUR 1,636.2 mn over the comparative period of the previous year. Apart from the high starting base, this was primarily attributable to the expected challenging market environment for standard viscose, less favorable exchange rates and lower production volume. EBITDA (earnings before interest, tax, depreciation and amortization) recorded a decline by 26.8 percent to EUR 290.6 mn due to price increases for key raw materials and higher energy and dissolving wood pulp prices. The EBITDA margin dropped from 23 percent in the first three quarters of the previous year to 17.8 percent. EBIT (earnings before interest and tax) fell by 36.2 percent to EUR 190.3 mn, leading to a lower EBIT margin of 11.6 percent (01-09/2017: 17.3 percent). Net profit for the period dropped by 39 percent from EUR 219.3 mn in the previous year to EUR 133.8 mn. Earnings per share equaled EUR 5.06 (01-09/2017: EUR 8.12).

“The Lenzing Group is currently operating in a challenging environment. Against this background, we are satisfied with the solid business development and the corporate strategy sCore TEN has a positive impact. The new production line in Heiligenkreuz started up successfully and customers’ feedback has been positive,” says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “While many viscose producers are faced with a very tense profit situation, we are well positioned due to our specialty strategy and still expect a satisfactory full year”, Doboczky adds.

Key strategic measures were implemented during the first three quarters of 2018 in line with the sCore TEN strategy. The start-up of new capacities for lyocell fibers in Heiligenkreuz, the production start of LENZING™ ECOVERO™ fibers at the Nanjing site and the investment in another pilot line for TENCEL™ Luxe filaments are important steps to accomplish the goal of increasing the share of specialty fibers in total revenue.

Project in Mobile temporarily mothballed
Due to the decision to temporarily mothball the lyocell expansion project in Mobile, Alabama (USA), in view of the buoyant US labor market and trade tensions between the major trading blocks, the implementation of the expansion plan for specialty staple fibers will be slowed down. The Lenzing Group will put all its effort to readjust the execution of its growth plan to meet strong market demand for its lyocell fibers. This includes an increased focus on the lyocell expansion project in Prachinburi (Thailand).

Advancing forward solutions
Regarding the capacity expansion for specialty products such as TENCEL™ Luxe filaments and LENZING™ ECOVERO™ viscose fibers, Lenzing is still on track. After the introduction of TENCEL™ Luxe branded lyocell filament yarns in the previous year, Lenzing continues to drive innovations in the area of the value chain. In September, the company also announced the successful development of the LENZING™ Web Technology, a new technology platform focusing on sustainable nonwoven products, which will lead to new market opportunities for the industry. Following several years of research and development work and investments totaling EUR 26 mn, the pilot plant at the headquarters in Lenzing has been successfully put into operation.

Largest dissolving wood pulp line worldwide
At the end of June, the Lenzing Group and Duratex, the largest producer of industrialized wood panels of the southern hemisphere, announced that they had agreed on the terms and conditions to form a joint venture to investigate building the largest single line dissolving wood pulp plant in the state of Minas Gerais (Brazil). This decision supports the self-supply with dissolving wood pulp and the growth in specialty fibers. The joint venture is investigating the construction of a 450,000 t dissolving wood pulp plant, which is expected to become the largest and most competitive single line dissolving wood pulp plant in the world. The final investment decisionto build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Acquisition of Chinese operation
At the beginning of November the takeover by the Lenzing Group of the remaining 30 percent of its Chinese subsidiary Lenzing (Nanjing) Fibers Co. Ltd. (LNF) from its state-owned joint venture partner NCFC was completed. After closing of the transaction, the Lenzing Group will hold 100 percent of LNF. The acquisition will have a negative impact on net profit of approx. EUR 21 mn for the fiscal year 2018. The purchase of the shares supports Lenzing’s strategic growth as a producer of specialty fibers from the renewable raw material wood in China and worldwide. It paves the way to setting up further production lines for specialty fibers. Lenzing wants to convert LNF into a specialty fibers hub over time.

Expansion of capacities
CAPEX (investments in intangible assets and property, plant and equipment) rose by 35.5 percent year-on-year to EUR 174.1 mn in the first three quarters of 2018. This is primarily attributable to capacity expansions in Heiligenkreuz and the expansion of the existing dissolving wood pulp plant in Lenzing as well as the investments made so far in Mobile.

Outlook
Demand development on the global fiber market remains positive. Lenzing expects wood-based cellulosic fibers to continue to grow at a higher rate than the overall fiber market. In a challenging market environment the Lenzing Group expects solid results for 2018, albeit lower than in the outstanding last two years.

For 2019, Lenzing expects standard viscose markets to remain under pressure because of an ongoing oversupply and very high raw material prices. Lenzing’s specialty fiber business is expected to continue the very positive development.

The above-mentioned development reassures the Lenzing Group in its chosen corporate strategy sCore TEN. Lenzing is very well positioned in this market environment and will continue its consistent focus on growth with specialty fibers.

• 16-18 October 2018, Kay Bailey Hutchinson Convention Center, Dallas, TX

A skateboard, architectural panels and a rigid roof for boats – all three products rely on CHOMARAT composite reinforcements. The three designs will be on display at CAMX Expo in the demonstration area of COMPOSITES ONE, partner of CHOMARAT and leader in composites distribution in North America. CHOMARAT’s reinforcements enable to give unique properties to these three applications.

Proof positive: reinforcements offer design flexibility & improved mechanical performance

These three applications give CHOMARAT the opportunity to demonstrate the performance of its uniquely designed reinforcements in real time. “The skateboard combines Rovicore™, the multi-function closed-mold reinforcement developed by CHOMARAT, with C-Weave™, its woven carbon fabric that offers both structural performance and aesthetics to the design. Rovicore™ provides the permeability, while C-Weave™ provides the carbon aspect,” explains Brian Laufenberg, president, CHOMARAT North America.

During the live demos, architectural panels using Rovicore™ and a rigid boat roof in RTM will also be made. “With 60 years of expertise in designing composite reinforcements, CHOMARAT demonstrates that its reinforcements offer excellent mechanical performance and design for a large number of projects in sectors as diverse as sport and leisure, marine and building,” adds Travis IRVIN, Sales Manager and Closed Mould Process Expert at CHOMARAT.

Meet CHOMARAT teams at BOOTH V39 and see Live demos in the COMPOSITES ONE demonstration area at CAMX 2018 EXPO

• Decline in revenue due to volatile standard viscose prices and currencies
• Prices for key raw materials still high
• New production line in Heiligenkreuz in start-up phase
• Backward integration into dissolving wood pulp to be strengthened via joint venture in Brazil

Lenzing – The Lenzing Group generated solid results in a challenging market environment in the first half of 2018. The decline in revenue and earnings compared with the first half of the previous year, which was the best half-year in the company’s history, was based on a mix of volatile prices for standard viscose and price increases for key raw materials, coupled with currency effects. The Lenzing Group’s strategic orientation with a focus on specialty fibers had a positive impact in this environment and is increasingly bearing fruit. The corporate strategy sCore TEN is being implemented with great discipline in order to expand the company’s offering of specialty fibers and even more extensively support customers and business partners.

Revenue declined by 6.4 percent compared with the first half of the previous year to EUR 1,075.4 mn. This decrease is primarily attributable to less favorable currency exchange rates. EBITDA (earnings before interest, tax, depreciation and amortization) decreased by 28.1 percent to EUR 194.8 mn, especially due to price increases for key raw materials and higher energy prices. The EBITDA margin fell from 23.6 percent in the first half of 2017 to 18.1 percent in the first half of 2018. EBIT (earnings before interest and tax) declined by 37 percent to EUR 128.7 mn, leading to a lower EBIT margin of 12 percent (H1 2017: 17.8 percent). The net profit for the period dropped by 39.3 percent from EUR 150.3 mn in the previous year to EUR 91.3 mn. Earnings per share equaled EUR 3.44 (H1 2017: EUR 5.55).

“So far, the financial year 2018 proved to be as challenging as expected, and market headwinds were clearly noticeable. In this market environment, we are satisfied with the solid results we report. We are proud that with our corporate strategy sCore TEN and the focus on growth with specialty fibers we show big steps in the right direction. The recently announced joint venture with Duratex is another important step in executing this corporate strategy,” says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “We will continue to implement our strategy with great discipline and are convinced that this will steadily improve the long-term profitability of Lenzing,” Doboczky adds.

Largest dissolving wood pulp line worldwide

In June, the Lenzing Group and Duratex, the largest producer of industrialized wood panels of the southern hemisphere, announced that they had agreed on the terms and conditions to form a joint venture to investigate building the largest dissolving wood pulp plant (single line concept) in the state of Minas Gerais, (Brazil). This decision supports the self-supply with dissolving wood pulp and the growth in specialty fibers, defined in Lenzing’s sCore TEN strategy. The joint venture will investigate the construction of a 450,000 t dissolving wood pulp plant, which is expected to become the largest and most competitive single line dissolving wood pulp plant in the world. The final investment decision to build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Even stronger focus on sustainable products

As a pioneer in sustainable fiber solutions, the Lenzing Group is committed to higher standards in the textile and nonwoven sectors. More than EUR 100 mn will be invested in sustainable manufacturing technologies and production facilities by 2022 in order to realize this vision. In line with the Group’s specialty strategy, another two milestones were set in the first half of 2018: Lenzing announced an investment of up to EUR 30 mn in another pilot line for the production of TENCEL™ Luxe filaments at the Lenzing site. In addition, the company also introduced the environmentally friendly process for the production of LENZING™ ECOVERO™ branded viscose fibers at its Chinese site. Both decisions contribute to better meeting the strong demand for environmentally compatible products.

Expansion of capacities

CAPEX (investments in intangible assets and property, plant and equipment) rose by 60.8 percent year-on-year to EUR 117.2 mn in the first half of 2018. This is primarily attributable to the capacity expansions in Heiligenkreuz (Austria) and Mobile, Alabama (USA) and the expansion of the existing dissolving wood pulp plant in Lenzing. The company is pressing ahead with these projects as well as with planning work on the construction of the next state-of-the-art lyocell production facility in Prachinburi (Thailand).

New brand identity

With the new positioning of its master brand and its product brands, the Lenzing Group started a new phase of branding and brand communication in the first half of 2018. Lenzing decided to carry out a new brand strategy in order to sharpen its company and product profile as a sustainable innovation leader for customers and partners along the value chain as well as for consumers. The most important pillar of this new brand strategy is a brand architecture with a focus on fewer brands and a strong message to consumers. With the TENCEL™ brand as an umbrella brand for all specialty products in the textile segment and the VEOCEL™ brand as the umbrella brand for all specialty fibers in the nonwoven segment as well as the new master brand, which was presented in March, Lenzing showcases its strengths in a targeted manner.

Outlook

The International Monetary Fund expects a further acceleration in global economic growth to 3.9 percent for 2018. However, growing protectionist tendencies in the political arena represent a source of uncertainty. Export-oriented companies in the Eurozone are faced with additional challenges from the currency environment.

Developments on the fiber markets should remain positive, but with continuing volatility. The rising demand for cotton should support prices despite the increase in production. Polyester fiber prices have stabilized after the increase in previous years.

The wood-based cellulosic fiber segment, which is relevant for Lenzing, should see further strong demand. After years of moderate capacity expansion in the viscose sector, significant additional volumes will enter the market in 2018 and 2019. As a result, standard viscose prices will remain under pressure. The Lenzing Group is very well positioned in this market environment with its corporate strategy sCore TEN and will continue its consistent focus on growth with specialty fibers.

The Lenzing Group still sees challenging market conditions for the second half of 2018. In addition to the price pressure on standard viscose, the prices of some key raw materials such as caustic soda are still at a very high level and exchange rates continue to be volatile. Our specialty fibers are expected to continue their very positive development. In this context, the Lenzing Group is satisfied with the earnings development to date, but underlines its estimate that the results for the year 2018 will be lower than the outstanding results in the last two years.

• More than EUR 100 mn investment in sustainable production technology until 2022
• Lenzing is committed to improving the textile and nonwoven industries as a leader in sustainable fiber solutions
• UN-Sustainable Development Goals as guiding principles for Lenzing’s sustainability agenda
• All Lenzing sites strive to fulfill the EU Ecolabel standard by 2022

The Lenzing Group, producer of botanic fibers from wood, expands its environmental leadership commitment. As a leader in wood-based cellulosic fibers, Lenzing has particular responsibility and ambition to help raising the bar in sustainability in the textile and nonwovens industries. To fulfill this vision, Lenzing is continuing its ambitious roadmap by investing more than EUR 100 mn in sustainable manufacturing technologies and production facilities until 2022.
 
Lenzing’s circular operating models with closed loop production processes set the standard in the industry. In order to further extend the environmental leadership, a major part of this investment will focus on closed loop production technologies for the expansion of the sulfur recovery systems. The second area of investment will be in improving the effluent treatment units. In addition, Lenzing will upgrade its energy usage to more sustainable solutions reducing its greenhouse gas emissions due to the construction of a gas boiler at its site in China. This investment strengthens Lenzing’s sustainability leadership at its Viscose facility in Nanjing.
 
The investments underline Lenzing’s commitment to the United Nations Sustainable Development Goals (SDG) as guiding principles for its sustainability agenda. One of the most significant SDGs for the company is SDG 12: Responsible production and consumption.
 
Stefan Doboczky, Chief Executive Officer, comments: “The textile and the nonwoven industries face fundamental challenges related to sustainability. Lenzing is passionate to take a leadership role in addressing this and making the world a better place. Our holistic approach to sustainability underpins this scope. The new eco-investment program is a major step forward in our ambitions.”
 
“The United Nations Sustainable Development Goals are a universal call for a sustainable economy that protects the planet and ensures prosperity and well-being for all people”, states Lenzing Chief Commercial
Officer Robert van de Kerkhof. “With our REFIBRA™ technology, Lenzing is innovating to support a more circular, bio-based economy, contributing in particular to SDG 12”, he adds.
 
With the Lenzing Group sustainability targets announced in 2018, Lenzing strives to upgrade all its production sites to the ambitious European Ecolabel standard by 2022. As a result, Lenzing is one of the first companies to commit to a global sustainability-oriented manufacturing standard.

• Fibres for automotive composites, technical textiles, hygiene and medical nonwovens
• UltraLink fibres offer sustainable system cost reduction solutions to the automotive industry
• Meralux offers improved liquid management for a dry feeling
• Stand 2034, ANEX 2018, 6-8 June, Tokyo Big Sight, Japan

Beaulieu Fibres International, the leading European polyolefin fibre supplier, marks its Asia Nonwovens Exhibition and Conference (ANEX) debut with unique products and capabilities to support innovation at a local level within the automotive and hygiene segments.

At Stand 2034, Beaulieu Fibres International demonstrates its commitment to the global market growth for automotive composites and technical textiles, as interest increases in adopting lightweight materials to reduce vehicle weight and fuel efficiency.

The company will present UltraLink bonding fibres that improve the mechanical, thermal and functional properties of the final part, allowing customers to meet OEM specific standards in a more sustainable way. They are available in both MONO and BICO technology – a first for the composites industry.

Jefrem Jennard, Global Sales Director – Industrial Fibres, comments: “Beaulieu Fibres International developed UltraLink fibres over the past two years to provide an answer to the automotive industry’s continuous strive for lower weight, lower emission, lower cost and better properties. They are being introduced in new global automotive programmes with SOP 2019-2021. We are delighted to introduce them to the Asian market at ANEX.”

At ANEX 2018, Beaulieu Fibres International also presents its platform of unique Meralux fibres offering significant improvements to the dryness of nonwoven for hygiene and medical applications. The BICO fibre has a special cross section, which enables it to provide bulk, opacity and enhanced fluid management compared to standard round fibres to nonwoven constructions. As a result, a dry feeling is achieved for the final nonwoven.

Petra Bohle-Stricker, Global Sales Director – Hygiene Fibres, comments: “As Asia Pacific heads towards becoming the largest regional tissue and hygiene market by the end of 2025  , nonwovens producers can already take advantage of the benefits of Meralux to launch new and innovative products that will grab the attention of global and local manufacturers. Visitors to our ANEX booth can experience Meralux fibres first-hand in nonwoven samples.”

Since Meralux was first launched in April 2017, the portfolio has expanded to include Meralux T and Meralux Soft. Beaulieu Fibres International is currently expanding its production programme with polyester-core (PET) BICO. In addition a pilot line for new developments is under construction. Both are expected to come on stream in 2018.