From the Sector

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

Sicomin, the formulator and supplier of the leading range of GreenPoxy bio-based epoxy resin systems, supplied its DNV GL approved InfuGreen 810 resin system that was used to infuse the Green Nacelle’s main structural sandwich panels, as well as providing intumescent FR gelcoats, bio-based laminating resins and UV resistant clear coatings for the groundbreaking new nacelle.  Materials, as well as on-site technical support, were delivered by Sicomin’s German distributor TIME OUT Composites.

The winners of the awards will be announced during JEC Connect which will be held on the 1st and 2nd June 2021.

Lenzing – The Lenzing Group had a clearly positive revenue and earnings development in the first quarter of 2021. Growing optimism in the textile and apparel industry as a result of the vaccination progress and the continuing recovery in retail led to a significant increase in demand and higher prices in the global fiber market.

•    Significant increase in operating result: EBITDA at EUR 94.5 mn, cash flow from operating activities more than tripled
•    Major strategic projects continue fully on track – production start of the lyocell plant in Thailand expected in the fourth quarter 2021
•    Upper Austria’s largest photovoltaic plant at the Lenzing site
•    Lenzing exits Hygiene Austria joint venture
•    Guidance 2021: Lenzing expects operating result at least at pre-crisis level

Please read the attached document for more information.

On June 1-2, 2021, JEC Composites Connect, the first round-the-clock digital event of the composites industry, will host significant industry players, enabling participants to discover their latest innovations. Three competitions the JEC Composites Challenge, the JEC Composites Startup Booster, and the famous JEC Composites Innovation Award, will also put the spotlights on the most innovative solutions and products this year

Key Figures

More than 1,000 companies from all the composites value chain spanning 46 countries will participate, network, and present their latest products on their digital booths.

Exhibitor’s breakdown by industrial sector :

• Raw materials
• Intermediate products
• Equipment, tools, and ancillary products
• Distribution, agents, and representation
• Third parties, services, engineering, and R&D
• Composite’s part producers and processors
• Composite’s end-users and integrators

Highlighting excellence and innovation

JEC Composites connect will also be the place to promote the composites sector’s biggest innovative projects. Many product launches are expected to be announced over the two days of the show, evidences a solidly dynamic sector led by high-performance and environmentally friendly innovations.

Among which 65 product launches are listed in the 2021 Innovation Report: from Raw materials, Intermediates and Ancillary, R&D to Production and Equipment, including Simulation and Measurement and Services.

Competitions and awards ceremonies

The JEC Composites Challenge will give the floor to ten young researchers from around the world on June 2nd at 12pm CEST. They will have five minutes to convince a panel of judges composed of leading industrial players in the composites sector. The competition builds bridges between research and industry and is a highlight of the event.

The 2021 JEC Composites Startup Booster has a line-up of 20 finalists who will pitch during two live sessions on June 1st from 10:30 am to 11:30 am and from 5 pm to 6 pm CEST. The 2021 JEC Composites Innovation Awards will celebrate the most innovative composites projects and fruitful collaborations between different value chain players in 2021.

From leaders to entrepreneurs, JEC COMPOSITES CONNECT is welcoming a lineup of special guests. As part of conferences, they will share their expertise, vision, and perspective in front of all the players in the composites industry.

AEROSPACE – Towards a More Sustainable Strategy, Tuesday, June 1st –  9am to 10:15am (CEST)
The aerospace industry is a major source of innovation and technological advancements that often originates inspiration across a wide variety of other industries. Nowadays, in a context where environmental constraints are becoming increasingly stringent especially when it comes to air mobility, OEMs are constantly in search of innovative answers and solutions that will allow them to create a ‘greener’ future. The need for light-weighting, reduced maintenance and waste, and repurposing aerospace-grade CFRP towards other applications are expected to drive demand and adoption of composites in aerospace applications.

Yannick Willemin, Head of Marketing & Business Development, 9TLabs, will chair this conference with Clémentine Gallet, CEO, Coriolis, Hervé Gilibert,CTO, ArianeGroup, Jean Botti, CEO, Voltaero and Scott Finn, Chief Consulting Engineer for Composites, GE Aviation.

AUTOMOTIVE – The Right Material at the Right Place, Tuesday, June 1st –  3 pm to 5:05 pm (CEST)
Among the many challenges facing the automotive industry, reducing vehicle mass and therefore emissions all while maintaining safety and cost-efficiency remain key. Lighter materials implying higher costs, they limit mass production. Therefore, a combination of materials, albeit hybrid solutions, would help solve this issue and are becoming increasingly attractive for manufacturers. This conference consists of industry presentations and a panel discussion involving major OEMs & Tier1s from all over the world. It covers the challenges & opportunities of using composites materials in the Automotive field.

Dale Brosius CFO, IACMI, will chair this conference with Alice Swallow, Senior Innovation Engineer, FORD MOTOR GROUP, Christophe Kühn, Senior Project Manager – Composites & Hybrid Components, VOLKSWAGEN, Dominik Klaiber, Doctoral Candidate Body Advanced Engineering, PORSCHE and Gerard LIRAUT, Expert Leader Polymers, GROUPE RENAULT – ALLIANCE RENAULT NISSAN MITSUBISHI.

Sappi is expanding its product range for corrugated board applications with Fusion Nature Plus.

With Fusion Nature Plus, Sappi is launching an uncoated, fully bleached and completely recyclable virgin fibre liner. The company provides a unique variety of packaging and speciality papers. The specialist in paper-based solutions also offers a wide range of products in relation to labels. Fusion Nature Plus offers excellent printing results in flexographic, digital and offset printing processes.

• Ultra-bright, uncoated virgin fibre paper with excellent printing results
• Ideal for attractive corrugated board as well as premium shopping bags
• Can be used as topliner, liner or fluting
• Available in grammages of 80 to 130 g/m²

The virgin fibre liner is based on the concept of the successful Fusion Topliner. In contrast to the double-coated Fusion Topliner, Fusion Nature Plus has a natural, uncoated surface with a more tactile feel, in response to the growing market appetite for this type of product. The liner is also provided in very low grammages.

Fusion Nature Plus enhances brand appearance

Brand owners, corrugated board processors, manufacturers of display cartons and folding cartons as well as designers all benefit from the versatility of the new Fusion Nature Plus. In contrast to conventional uncoated liner papers, the material offers high brightness, brilliant colour reproduction and consistently high quality. These features make the product the perfect choice for corrugated board or solid board packaging, where a very bright appearance is needed for topliners, inner liners and corrugating applications. Whether used as an inlay in cosmetics or confectionery packaging, or as a liner in shipping packaging to ensure an exceptional unboxing experience, Fusion Nature Plus is called upon wherever an enhanced appearance is desired.

Another area of application is paper carrier bags, where uncoated paper qualities are often preferred.

Fusion Nature Plus is ideally suited to a range of printing processes: the product achieves outstanding results in flexographic and offset printing. The pre-treated surface and high brightness offer clear advantages with regard to primer requirements and print behaviour, especially for inkjet-based digital printing. Bernd Gelder, Head of Sales Containerboard at Sappi Europe: ‘With its exceptional print quality and impressive colour reproduction, Fusion Nature Plus particularly appeals to packaging customers who value a natural look and feel in paper. The response from the market, in which packaging based on corrugated board still needs to take on a bigger role, is enormous, of course, with the result that we have succeeded in completing a number of interesting end applications and customer projects with Fusion Nature Plus shortly after market launch.’

Virgin fibre vital for recycling

In continuous recycling use, fiber that has already been recycled is subject to a progressive weakening of quality, resulting in a weakness in the products that incorporate them, but also, crucially, over time they will ultimately degrade to a point where they become unrecoverable. As a result, a certain amount of virgin fibre needs to be introduced into the cycle on a regular basis. Without continuous virgin fibre contribution to the pulp cycle, recycled producers will in the end run out of raw material. The premium virgin fibre liner Fusion Nature Plus from Sappi plays an important role here in maintaining the quality of the recycling substrate.

Thanks to the central location of Sappi’s production site in Ehingen, Fusion Nature Plus can be supplied quickly throughout Europe. The shorter transportation distances reduce transport related fossil emissions and protect the environment. The shorter production cycles in turn ensure high availability and rapid supply.

Fusion Nature Plus is currently available in six grammages from 80 to 130 g/m² in both sheet and roll form. Sappi can also provide Fusion Nature Plus with FSC or PEFC certificates on request.

Brodelec chose to broaden its scope of activity by investing in the Kornit Presto S.

Dominique Willems, CEO at Brodelec, comments: "We had already seen a strong trend for personalized items, whether in the furniture or fashion sector, but since the beginning of the pandemic we have seen a strong growth in requests for small-scale personalization. And that's exactly where Kornit offers us a solution with incredible durability and quality, perfectly suited to our needs."

He continues: "The Kornit Presto S has allowed us to bring our latest project to life: the creation of a website entirely dedicated to ordering custom masks. Thanks to an online editor and our 200 models, our customers can order their masks in quantities ranging from 1 to several thousand pieces if necessary. As the Kornit Presto is free of certain technical and chemical constraints and has adapted perfectly to Brodelec's workflow system; we are currently printing more than 10,000 masks per week and can respond to requests within extremely short deadlines while guaranteeing quality and sharpness of detail. The masks meet the recommendations of the AFNOR and are designed with a fabric that filters out particles in the air by over 90%! Therefore, the designed and printed fabric masks are designated as category 1 and meet the UNS1 standards. They are distributed after testing for 60 washes."

• The new platform created for b2b / b2c online sales entirely dedicated to the business of denim.

The year 2020 witnessed an acceleration in the importance of online sales. It is now clear to anyone involved the business of sales that e-commerce represents the future.

That’s when the creative idea by Laura Pianazza, founder of DENIMAZING (combination of DENIM and AMAZING), was launched on the platform powered by VELVET.  Its prime objective is to help small and medium sized companies to increase their online sales, focusing on the development of marketing strategies in an omnichannel environment thanks to an intelligent balance between technology and professional experience.

Laura Pianazza derives her professional experience from the editorial sector, where she was active for many years on a European level for a trade magazine specialized in the denim business. Thanks to this background, she was able to develop a strong network of contacts with entrepreneurs, top management and marketing agencies. Her constant interaction with customers shed light on the digital challenges present in most Italian companies: firstly, the fragmentation of services offered online and, secondly, the lack of integration between technology and marketing strategies. The latter is the one most often neglected by firms and Laura recognized many risked not being well prepared for this transformational shift in business by investing little time and at a slow pace.

The DENIMAZING project works side by side with denim fabric manufacturing companies (b2b), finished product brands and distribution companies (b2c), all with the same common denominator: denim. A unique service assisting raw materials manufacturers in finding market niches in companies that create product, who in their own right would like their brand to be seen and sold to a growing customer base. In the b2b landscape, companies can sell their own fabrics by the meter thanks to their own 3D presentation and customers can virtually visit their showrooms. Similarly, brands will have the same possibility to sell their creations as on a real e-commerce site, thanks to virtual tours in their showroom and specific areas for sales and/or chatting/videocalls with end-customers. Instead, for companies providing supply chain services (coloring, washing, etc.), individual virtual rooms will be made available inside the marketplace, in order to speak directly with sales managers from brands and the fabric companies.

The business side is just one aspect of this project. Thanks to its partnership with the marketing and online sales agency VELVET, DENIMAZING grows based upon a series of key tasks during different phases, namely: platform construction, marketing and advertising, both traditional and via web and social medias.

Not only has Laura has added a series of high-level technology/web master courses to her experience, but DENIMAZING also brings together a team of qualified professionals having a longtime experience in different fields of the denim business: sales, entrepreneurs, web design and marketing, while the end-customer will be in direct contact with the headquarters for assistance, customer care and updates.

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Jeanologia, a world leader in sustainable and efficient technology development, today announced the launch of ‘Pad-Ox G2 Cold’, a water-saving dyeing process at room temperature for casual looks.

Archroma initially introduced its eco-advanced Pad-Ox dyeing process for woven fabrics, and then used it as part of its ADVANCED DENIM concept. By combining the oxidation and fixation steps, it is possible to shorten the dyeing process and thus realize substantial resource savings in water, wastewater, cotton waste, and energy.

Over the years the company has worked with its textile manufacturers and partners to improve the Pad-Ox process, in particular woven applications such as chinos and casual wear. To achieve maximum positive impact, Archroma is using its Diresul® range of low sulfide sulfur dyes and, more recently, its innovative plant-based range of EarthColors®. A wide selection of dyes from these two ranges have received the Cradle-to-Cradle Product Innovation Institute’s Platinum Level Material Health Certification.

Meanwhile, Jeanologia has been working on the technology side, with laser and eco-finishing solutions for more than 25 years, accompanying the textile industry on their way to producing with zero discharge. In 2008, the company introduced its G2 Dynamic the first ozone treatment for continuous fabric that dramatically reduces the amount of water and chemicals used, while at the same time saving costs at the mill and eventually at the garment finishing facilities. This technology makes fabric more stable and consistent and prepares the fabric better for the use of other technologies like laser. This machinery can be used along with Pad-Ox technology to help cleaning fabric thus improve fastness results. While it allows process to work at room temperature.

Project focus on water saving
Archroma and Jeanologia therefore understandably decided to team up and combine their expertise in sustainable dyeing and finishing technologies. The objective of the project was to improve the Pad-Ox dyeing process even further, in particular in one area that still offered room for positive impact: temperature and fastnesses.

The new ‘Pad-Ox G2 Cold’ dyeing process works thanks to the insertion of very small machinery into the existing finishing range process, using cold processing and thus operating with much less water, carbon footprint and energy than traditional benchmark fabric finishing processes, whilst retaining the water and other resource savings offered by the Pad-Ox technology.

Maximum savings can be achieved by mills and garment manufacturers who wish to switch from a conventional dyeing process straight to ‘Pad -Ox G2 Cold’ to obtain high quality fabrics for comfortable and casual wear.

JEC Group, dedicated to promoting composite materials, introduces all-new digital event series for the composites community: JEC Composites CONNECT. On June 1-2, 2021, this first round-the-clock event will be one of the industry’s most significant events, hosting major industry players, enabling participants to discover the latest trends thanks to business conferences and get networking opportunities. This live-streamed event will also be the place to highlight innovation through competitions, awards ceremonies and keynote speeches.

JEC Composites CONNECT: a digital event to bring the composites community together
Participants can access the free non-stop digital floor from 8:30 am on June 1 to 6 pm CEST on June 2. This first JEC Composites CONNECT will work as an online trade show, with digital stands for companies showcasing their latest products, from raw materials to composites parts manufacturers with various networking rooms, a meeting requests platform, and with a conference area to access live streaming content.

Composites innovation at the core
JEC Composites CONNECT will host outstanding keynote speakers and all the major JEC Composites competitions and awards promoting innovation, research teamwork, and entrepreneurship in the composites industry.

• The JEC Composites Innovation Awards celebrate the most innovative composites projects and fruitful collaborations between different value chain players in 2021.
• The 2021 JEC Composites Startup Booster competition, with live pitches and winners ceremony.
• The JEC Composites Challenge, where Ph.Ds will present their research projects in front of the jury.

The Awards ceremony will take place on Wednesday, June 2, with an opening keynote speech from inventor and genius entrepreneur Franky Zapata, a.k.a. ‘the Flying Man.’ As the CEO and founder of the company that bears his name, he became well-known for his famed crossing of the English Channel in August 2019 on his Flyboard® Air.

• Major Monforts denim customers continue to pioneer new initiatives that are pushing the boundaries of sustainable production.

Recycling their cotton waste has become one way these companies can do more with less, and at the recent Kingpins24 Flash online event, Sedef Uncu Aki, director of Orta, headquartered in Istanbul, Turkey, announced a new partnership with leading recycling operation Gama Recycle.

Traceable
“Through this local partnership we will supply the waste from our spinning mills and return around 3,000 tons of premium quality cotton back to them,” she said. “We have established a truly controlled and traceable system and partnering with a domestic recycling centre is important because a lot the carbon emissions associated with recycling usually come from transportation.”

Orta’s ZeroMax range meanwhile uses no cotton at all, being based on Lenzing’s Tencel cellulosic fibre, while the company’s involvement in denim production for a recent launch by Levi Strauss, of jeans made with organic cotton and Circulose – a breakthrough material developed by re:newcell of Sweden and partners – was hailed as a further step forward.

To make Circulose, re:newcell repurposes discarded cotton textiles, such as worn-out denim jeans, through a process akin to recycling paper. The incoming waste fabrics are broken down using water. The colour is then stripped from these materials using an eco-friendly bleach and after any synthetic fibres are removed from the mix, the slurry-like mixture is dried and the excess water is extracted, leaving behind a sheet of Circulose. This sheet is then made into viscose fibre which is combined with cotton and woven into new fabrics.

Circular Park
Omer Ahmed, CEO of Artistic Milliners also announced plans for his company’s new 70,000 square-foot Circular Park in Karachi, Pakistan, at Kingpins24 Flash.

Once complete, this will add three million square metres of additional denim capacity a month to the company’s production and take its total recycled output to a monthly five million metres.
Ahmed observed that there is currently a lack of sustainable fibres that are readily available to use for denim production at scale.

“Organic cotton is too expensive, and in my opinion always will be,” he said. “Cottonised hemp is also not cheap and it’s hard to mix with cotton, while the new regenerated cellulose fibres that are now emerging are promising, but currently in short supply. Recycled polyester is meanwhile still based on petroleum resources which we want to move away from. As a consequence, there are only a few other options for us as a manufacturer and this new project will help us minimise our own waste while significantly lowering our carbon footprint.”

Other Monforts denim customers to introduce cotton fibre recycling operations at their plants recently include AGI Denim, Bossa and Soorty.

Vertical savings
Refresh is the name of the latest collection from AGI Denim – reflecting the company’s significant reduction in water consumption.

The company has just opened new fibre spinning and denim mills at its complex in Karachi, Pakistan.

“Over the years we’ve gone through a series of backward integration steps to become fully vertical,” said AGI Denim executive director Ahmed Javed, at Kingpins24 Flash. “In our latest expansion, we revisited every step of the production processes in order to make resource savings.”

Innovations have included the installation of proprietary robotics for garment finishing, but the most attention has been paid to water savings.

“Pakistan is one of the largest cotton-producing companies in the world and we’re fortunate that the type of cotton that is grown here is well suited to denim production and also helps us lower our carbon footprint, with everything done in close proximity,” Javed said. “In the lifecycle of a pair of denim jeans, however, cotton fibre production contributes 68% of water consumption. While we cannot control how much water cotton needs for it to grow, we can rethink the way we use it in our factory.”

Refresh-branded denims are washed from 100% recycled water as a result of the company’s new wastewater treatment plant, which puts production wastewater through a series of steps beginning with equalisation, followed by aeration and concluding with sedimentation. The water travels through filtration and ultrafiltration systems before being subjected to an activated carbon system and finally a reverse osmosis system to reduce any dissolved salts.

AGI now recycles 4.4 million gallons of water each month – enough to wash a million pairs of jeans.

Sustainable
Monforts has a leading position in the field of denim finishing with its well proven Thermex continuous dyeing systems, Montex stenter dryers and other lines for resource-efficient and economical processing.

“Our denim partners are constantly setting themselves new goals in respect of sustainable production – and more importantly, achieving them,” says Hans Wroblowski, Monforts Head of Denim. “We work closely with them with the aim of constantly optimising processing parameters and achieving further savings in energy, water and raw materials throughout the dyeing and finishing stages of production.”

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing. The CYD system integrates new functions and processes into the weaving preparation processes to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre in Mönchengladbach, Germany.”