From the Sector

• Major Monforts denim customers continue to pioneer new initiatives that are pushing the boundaries of sustainable production.

Recycling their cotton waste has become one way these companies can do more with less, and at the recent Kingpins24 Flash online event, Sedef Uncu Aki, director of Orta, headquartered in Istanbul, Turkey, announced a new partnership with leading recycling operation Gama Recycle.

Traceable
“Through this local partnership we will supply the waste from our spinning mills and return around 3,000 tons of premium quality cotton back to them,” she said. “We have established a truly controlled and traceable system and partnering with a domestic recycling centre is important because a lot the carbon emissions associated with recycling usually come from transportation.”

Orta’s ZeroMax range meanwhile uses no cotton at all, being based on Lenzing’s Tencel cellulosic fibre, while the company’s involvement in denim production for a recent launch by Levi Strauss, of jeans made with organic cotton and Circulose – a breakthrough material developed by re:newcell of Sweden and partners – was hailed as a further step forward.

To make Circulose, re:newcell repurposes discarded cotton textiles, such as worn-out denim jeans, through a process akin to recycling paper. The incoming waste fabrics are broken down using water. The colour is then stripped from these materials using an eco-friendly bleach and after any synthetic fibres are removed from the mix, the slurry-like mixture is dried and the excess water is extracted, leaving behind a sheet of Circulose. This sheet is then made into viscose fibre which is combined with cotton and woven into new fabrics.

Circular Park
Omer Ahmed, CEO of Artistic Milliners also announced plans for his company’s new 70,000 square-foot Circular Park in Karachi, Pakistan, at Kingpins24 Flash.

Once complete, this will add three million square metres of additional denim capacity a month to the company’s production and take its total recycled output to a monthly five million metres.
Ahmed observed that there is currently a lack of sustainable fibres that are readily available to use for denim production at scale.

“Organic cotton is too expensive, and in my opinion always will be,” he said. “Cottonised hemp is also not cheap and it’s hard to mix with cotton, while the new regenerated cellulose fibres that are now emerging are promising, but currently in short supply. Recycled polyester is meanwhile still based on petroleum resources which we want to move away from. As a consequence, there are only a few other options for us as a manufacturer and this new project will help us minimise our own waste while significantly lowering our carbon footprint.”

Other Monforts denim customers to introduce cotton fibre recycling operations at their plants recently include AGI Denim, Bossa and Soorty.

Vertical savings
Refresh is the name of the latest collection from AGI Denim – reflecting the company’s significant reduction in water consumption.

The company has just opened new fibre spinning and denim mills at its complex in Karachi, Pakistan.

“Over the years we’ve gone through a series of backward integration steps to become fully vertical,” said AGI Denim executive director Ahmed Javed, at Kingpins24 Flash. “In our latest expansion, we revisited every step of the production processes in order to make resource savings.”

Innovations have included the installation of proprietary robotics for garment finishing, but the most attention has been paid to water savings.

“Pakistan is one of the largest cotton-producing companies in the world and we’re fortunate that the type of cotton that is grown here is well suited to denim production and also helps us lower our carbon footprint, with everything done in close proximity,” Javed said. “In the lifecycle of a pair of denim jeans, however, cotton fibre production contributes 68% of water consumption. While we cannot control how much water cotton needs for it to grow, we can rethink the way we use it in our factory.”

Refresh-branded denims are washed from 100% recycled water as a result of the company’s new wastewater treatment plant, which puts production wastewater through a series of steps beginning with equalisation, followed by aeration and concluding with sedimentation. The water travels through filtration and ultrafiltration systems before being subjected to an activated carbon system and finally a reverse osmosis system to reduce any dissolved salts.

AGI now recycles 4.4 million gallons of water each month – enough to wash a million pairs of jeans.

Sustainable
Monforts has a leading position in the field of denim finishing with its well proven Thermex continuous dyeing systems, Montex stenter dryers and other lines for resource-efficient and economical processing.

“Our denim partners are constantly setting themselves new goals in respect of sustainable production – and more importantly, achieving them,” says Hans Wroblowski, Monforts Head of Denim. “We work closely with them with the aim of constantly optimising processing parameters and achieving further savings in energy, water and raw materials throughout the dyeing and finishing stages of production.”

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing. The CYD system integrates new functions and processes into the weaving preparation processes to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre in Mönchengladbach, Germany.”

Archroma, a global leader in specialty chemicals towards sustainable solutions, announced that it has become a The BHive® partner to help foster chemical compliance and management across the textile supply chain.

The BHive® is an innovative digital chemical management platform that provides at-a-glance information about chemical products to its users. It was developed by GoBlu International Ltd. to allow manufacturing facilities to easily create digital inventories of the chemical products used onsite using a smartphone. They can identify in a matter of seconds which products meet sustainability requirements of their brand and retail customers, who they can share this information with as well. This enables brands and retailers to achieve full transparency about the chemical use in their global supply chain. Now, over 30 international fashion brands and 500 factories are partnered with The BHive® to drive sustainable chemistry in the textile and fashion industry.

More than 2000 Archroma chemical products and dyes are now included in The BHive® database.
The company has been very active in the past few years in developing solution systems and innovations in line with the 3 pillars of 'The Archroma Way to a Sustainable World: Safe, efficient, enhanced. It’s our nature'.

Paul Cowell, Head of Archroma’s Competence Centers for Brand & Performance Textile Specialties, explains: "With the pandemic crisis, textile manufacturers are experiencing numerous logistic bottlenecks and challenges. With The BHive®, our partners have now an additional access path to the information about chemical usage and compliance for the Archroma products they keep at their facilities."

• 75% recycled content yarn with no performance compromise
• A circular, endlessly recyclable solution for contract, automotive and residential carpets
• Significant resource efficiency in EqoCycle production compared to virgin-based PA6 yarn: 58% reduction in fossil fuel use; 27% less energy consumption; 37% CO₂ emission reduction

B.I.G. Yarns announces its latest development, EqoCycle, a fully recyclable PA6 yarn with 75% recycled content, offering the same high-quality performance of virgin PA6 yarn. The new recycled yarn mainly based on post-industrial waste supports contract, automotive and residential carpet manufacturers with a drop-in circular solution to reduce the ecological footprint of their end products.

EqoCycle is made with recycled granulates derived from pre-consumer recycled and regenerated PA6, certified by Control Union for Global Recycled Standard (GRS) Certification. The use of less virgin materials implicates a decrease of fossil fuels by 58% and a 27% decrease in energy consumption. On top, EqoCycle yarns allow a reduction of 37% of CO₂ eq./kg compared to the fossil based yarns. The environmental impacts of EqoCycle with 75% recycled content were calculated through an LCA analysis, verified according to ISO 14025 and EN 15804+A1 and published in an Environmental Product Declaration (EPD registration number S-P-02415).

Customers have the assurance that for every 1.000 tons of EqoCycle yarn, 13,562 barrels of oil are saved and 2.700 tons of CO₂ emission are reduced, compared to PA6 traditionally made from virgin materials.

Emmanuel Colchen, General Manager Yarns Division, comments: “EqoCycle is a perfect example of how higher resource efficiency in our industry can promote greater circularity in our customers’ industries. Minimizing waste, re-using materials, and saving energy and carbon emissions in production, it provides our customers and carpet brands with a new sustainable alternative that won’t compromise their end-product performance but will support their increasing focus on CO₂ reduction and global warming potential. All part of our wider commitment to encourage decoupling from the need for only virgin feedstocks and moving towards a circular economy for yarns and soft flooring industries.”

EqoCycle is the latest circular solution in B.I.G. Yarns’ PA6 portfolio, joining EqoBalance PA6, based on biomass balance renewable resources, which offers up to 75% CO₂ reduction. Both exemplify the company’s on-going investment in developing new products that better serve customers’ needs in a sustainable way. B.I.G. Yarns fully pursues opportunities to support and solve the global environmental challenges through innovation, investment and collaboration, as part of its sincere belief in, and broader commitment to, Social Responsibility.

The innovation of EqoCycle and EqoBalance PA6 aligns with the company’s active integration of the UN Sustainable Development Goals (SDGs) into its business activities, creating value for customers and engaging employees and value chain partners.

Intimissimi, a famous lingerie brand, gives an edge of responsible innovation with Tessitura Colombo recycled and plant-based colored ingredients.

Intimissimi, a renowned lingerie brand, constantly engaged in research and development of innovative collections expressed through its performances: for this collection, the lingerie brand has selected made in Italy ingredients of Tessitura Colombo, a lace manufacturer that has always prioritized the protection of the environment and natural resources.

"Nature's dream", coming to stores this spring, is the name of the new line that wants to be inspired by nature and where sustainability is fully integrated throughout premium recycled ingredients and natural plant dyed process. "Nature's dream" is part of the sustainable families of the #intimissimicares collection, that is created to comply with short and long-term sustainability objectives: attention to the usage of natural resources, protection of the environment, control of the supply chain and choice of sustainable fibres.

• Entscheidungen des Corona-Gipfels geben keine Perspektive
• Für Hotelwäschereien wird die Lage immer dramatischer und das Personal rennt davon

Die Ergebnisse des jüngsten Corona-Gipfels sind für die Hotellerie- und Gastronomiebranche erneut niederschmetternd. Extrem davon betroffen sind auch deren Zulieferer wie Wäschereien. Es fehlt weiterhin an einer Perspektive. Jetzt läuft den Unternehmen auch noch das Personal davon.

„Die Entscheidungen vom vergangenen Mittwoch sind in keiner Weise nachzuvollziehen“, so DTV-Geschäftsführer Andreas Schumacher. „Hier wird eine ganze Branche samt ihrer Zulieferer in Haft genommen, trotz inzwischen besseren Wissens.“ Noch vor wenigen Tagen hatte das RKI den Hotels ein niedriges Infektionsrisiko bescheinigt. Hotels würde nicht zu den Pandemie-Treibern gehören, hieß es dazu. Die Branche und ihre Zulieferer hatten deshalb auf eine Öffnungsperspektive beim gestrigen Gipfel von Bund und Ländern gehofft. Der DTV fordert daher dringend Pläne für eine schrittweise Öffnung, beispielsweise mit maximalen Belegungsquoten von 50% in Hotels und Zulassen der Außengastronomie.

Durch die Vorgaben zu Home Office, die Versammlungs- und Veranstaltungsverbote und das Verbot touristischer Übernachtungen sind Hotels inzwischen fünf Monate geschlossen bzw. haben kaum Gäste. Hotelwäschereien, die aktuell zwischen 80 und 90 Prozent Umsatzverluste haben, fordern von Bundesregierung und Länderchefs ein deutlicheres Bekenntnis zu einer Öffnungsperspektive aufgrund der Erkenntnislage zum Infektionsgeschehen. Doch offensichtlich wollen Bund und Länder der Hotellerie-Branche und ihren Zulieferern weiterhin geschlossen halten – entgegen der RKI-Belege und trotz geeigneter Hygienekonzepte und Nachverfolgung. Erst am 22. März soll über mögliche Öffnungen und über Reisen während der Ostertage entschieden werden.

Permanenter Personalverlust droht

„Wie soll diese Branche überleben? Den Hotels und auch den Hotelwäschereien rennt das Personal inzwischen in Scharen davon. Jeder Tag ohne Perspektive ist nicht nur für die Wäschereien, sondern auch für deren Mitarbeiter ein Tag ohne Zukunft.“ Viele DTV-Mitgliedbetriebe berichten von Personalverlusten in zweistelligem Prozentbereich. Tausende von Beschäftigten in den Wäschereien warten immer noch auf eine Perspektive – doch Bund und Länder sehen sich nicht veranlasst, diese Perspektive auch nur ansatzweise aufzuzeigen.

Hier entsteht für die Zukunft zudem ein riesiges Problem: Wenn Hotels irgendwann wieder öffnen können, fehlt es an Personal, Zulieferern und an der Wäscheversorgung. Die Beherbergungsbranche ist gerade für den Messestandort Deutschland von enormer Bedeutung. Ohne Perspektive werden jedoch die Hotels und damit auch die Wäschereien bis dahin kaputt sein. „Wie kann man eine Branche weiterhin komplett im Lockdown halten, die nachgewiesenermaßen ein niedriges Infektionsrisiko hat?“, so DTV-Geschäftsführer Schumacher.

Textilhygiene, Impfungen und Tests unterstützen sicheres Re-Opening

Die Textilservice-Branche unterstützt die Hotellerie und Gastronomie mit hygienisch aufbereiteter Bett- und Tischwäsche sowie Arbeitsbekleidung. Bei einem regelmäßigen Wechsel können sich Gäste und Mitarbeiter darauf verlassen, dass von dieser Seite keine Ansteckungsgefahr ausgeht. Ebenso sollten Schnelltests und zügiges Imfpen natürlich die Öffnungsstrategie unterstützen.

A technology to reduce 75% of the water typically used in denim and garment laundry processes, this innovation is evidence of the commitment by Officina+39 to a more sustainable production and planet.

An Italy-based reality with a thirty-year experience on research and chemical application in the textile sector, Officina+39 brings to the table its latest innovation, launched in occasion of Kingpins 24 Flash: the AQUALESS MISSION. It features three products for one innovative process suitable for conventional machines: REMOVER BC, a laser booster, AQUALESS AGED, a waterless compound to give denim abrasion effects and OZ-ONE POWDER, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look.

REMOVER BC
This special compound increases laser effect on indigo or dischargeable dyestuff, saving time and energy for a swifter production. Due to the speedy process it also prevents fabric tearing whilst focusing on giving a used look.

AQUALESS AGED
Ideal to give abrasion effects on denim, this waterless treatment has a reduced impact on the environment and can be applied in combination with Oz-One powder both on black and indigo denim.

OZ-ONE POWDER
The sustainable (chlorine and potassium permanganate free) way to give denim that distressed and worn look, with no need of water or high temperatures.

AQUALESS MISSION meets the needs of the industry to reduce water in manufacturing operations, pledging to meet UN’s 2030 SDG 6 of clean water and sanitation, and by doing so protects the planet and its resources.

• AFRY engineering partner when Renewcell expands operations to lead the fashion industry into a sustainable and circular future

Renewcell has awarded AFRY an engineering assignment for their recycled textile materials production expansion at SCA's Ortviken paper mill in Sundsvall, Sweden. The assignment includes project and construction management services, process, mechanical and piping engineering, electrical, automation and instrumentation engineering, fire and HVAC design, as well as civil design. The project is a continuation of AFRY's previous feasibility studies.

The trend in textiles and design requires sustainable fashion. Customers require fashion companies to reduce their environmental impact through new technologies and innovations for the circular economy. One important element is recycling of textile fibers that is a path towards a more sustainable fashion.

Renewcell is a multi-award-winning textile recycling company based in Sweden. The company’s vision is to inspire an Industrial Evolution towards a sustainable world by producing high quality materials from recycled textiles. “There is a way to put fashion first without putting the environment in second place” – Renewcell describes their business concept. With their technology, the company has succeeded in recycling and regenerating textile fiber from old clothes to turn into new clothes. For example, H&M, a partner of Renewcell, has launched a garment that is half made with Renewcell’s fabric.

Today, Renewcell has a demo plant in Kristinehamn, Sweden, with the possibility to recycle over 4,500 tons of textiles each year. The company has now signed a major agreement with one of the world's largest producers of viscose fiber. With that as a basis, together with a well-proven process and technology, they are now building a full-scale production plant in Sundsvall, Sweden. When the new plant is ready for production, it will have the capacity to recycle 60,000 tons of textile waste annually, which is just over half of Sweden's annual textile consumption. The new plant is expected to be commissioned in 2022.

“We are pleased to continue the partnership with AFRY, which began with the feasibility study they delivered in 2020. With AFRY, we feel secure in having a partner with both world-leading expertise and the ability to deliver projects on time and within budget. Together, we lead the fashion industry into a sustainable and circular future,” says Christer Johansson, Project Director at Renewcell.

“We are extremely proud to be part of Renewcell’s investment. We are excited to contribute in this transition towards more sustainable solutions for the future and look forward to continue this journey together with Renewcell,” says Ulf Strenger, Business Unit Manager at AFRY.

• ARMEDANGELS: Wie das nachhaltige Modelabel mit Shopware 6 auf Zukunftsfähigkeit setzt

Die Marke ARMEDANGELS darf sich heute zu den größten Eco & Fair Fashion Labels Europas zählen. Ein Team von fast 100 Mitarbeitern sorgt dafür, dass nachhaltige Mode sowohl über den erfolgreichen Shopware 6 Onlineshop als auch in rund 900 stationären Ladengeschäften verschiedener Handelspartner europaweit Kunden glücklich macht. Doch wie kam es zu dieser Erfolgsgeschichte?

Nachhaltigkeit ist nicht nur ein Trend, es ist eine Lebenseinstellung – insbesondere für die Gründer der Fashionbrand ARMEDANGELS. Das beweist allein die Tatsache, dass sich Martin Höfeler und Anton Jurina bereits 2007 dazu entschieden, sich von der bisherigen Mode-Industrie abzugrenzen und mit fairer Produktion und ökologischen Materialen neue Maßstäbe zu setzen. Weg von schnelllebigen Modetrends, unwürdigen Arbeitsbedingungen in den Produktionsstätten, hin zu zeitlosem Design, nachhaltigen und regenerativen Materialien, fairen Arbeitsbedingungen und fairer Bezahlung. Ausgezeichnet wurde das Label mit dem Fairtrade- und GOTS-Zertifikat und ist überdies Mitglied der Fair Wear Foundation.

Headless und API-first-Ansatz überzeugen ARMEDANGELS
Auch mit ihrem Onlineshop setzt das Kölner Unternehmen auf Innovationskraft und entschied sich für den Wechsel von Magento zu Shopware. „Wir wollten ein neues modernes System, das schnell ist, mobiles Shoppen in der Zukunft durch PWA noch einfacher machen kann und uns genügend Flexibilität und Einfachheit bei der Content Erstellung bietet“, erklärt Kristof Kruse, System Owner Webshop bei ARMEDANGELS, die Entscheidung für Shopware 6. Diese Version erfüllt die Anforderungen perfekt, schließlich bietet es die perfekte Grundlage für Headless E-Commerce und ermöglicht durch die neuen Erlebniswelten das einfache Erstellen von kanalübergreifenden Einkaufserlebnissen ohne technisches Vorwissen.
Mit ihrem bisherigen Shopsystem Magento stieß das Modeunternehmen an Grenzen: Der Hersteller stellte den Support für die eingesetzte Version Magento 1 ein und auch dem zunehmenden Mobile Traffic war das System nicht mehr gewachsen.

In nur sechs Monaten von Magento zu Shopware migriert
Bei der Umsetzung wurde das Unternehmen von der Shopware Agentur dasistweb begleitet. In nur sechsmonatiger Relaunchzeit wurde ein weltweiter Onlineshop auf Basis der Shopware Enterprise Edition konzipiert und livegestellt. „In partnerschaftlicher Zusammenarbeit zwischen ARMEDANGELS und uns entstand Hand-in-Hand das Konzept für den neuen Shop“, blickt Martin Weinmayr, CEO von dasistweb auf den Projektverlauf zurück.

„Mit einer Art ‚agilem Wasserfallprojekt‘ konnten Konzept- und Umsetzungsphase so parallelisiert werden, dass finalisierte Konzept-Bereiche bereits umgesetzt wurden, während noch an Konzepten für weitere Features gefeilt wurde. So konnte ARMEDANGELS beispielsweise ein sehr früher Start für die Content-Pflege ermöglicht werden, was unter anderem zu einer optimalen und verkürzten Projektlaufzeit verhalf“, beschreibt Weinmayr weiter.

Shopware Erlebniswelten: Einfache und schnelle Ausspielung bringen hohe Zeitersparnis
Schon nach kurzer Zeit konnte das E-Commerce-Team von ARMEDANGELS konkrete Vorteile durch den Relaunch für sich erkennen. „Wir profitieren von schnelleren Ladezeiten und einer viel schnelleren und einfacheren Landingpage-Erstellung, ohne Developer-Bedarf. Die Shopware Erlebniswelten sorgen für eine erhebliche Zeitersparnis in unserem Team“, so Kruse.

10 %-ige Steigerung des Umsatzes und der Conversion-Rate durch den Einsatz von Shopware
Auch die automatisierte Verzahnung von Shopware und ERP sorgen für große Erleichterung, so erfolgt die Retourenerstattung jetzt ganz automatisch unter Berücksichtigung der verwendeten Rabatte. Mit der Migration die richtige Entscheidung getroffen zu haben, beweisen auch die verbesserten KPIs, so steigerten sich durch den Einsatz von Shopware Umsatz und (mobile) Conversion um satte 10 %.
Fazit und Ausblick: Onlineshop stellt sich noch internationaler auf „Wir freuen uns über die sehr gute Teamzusammenarbeit mit dasistweb und Shopware, wodurch ein absolut rundes Projekt entstanden ist, welches wir auch zukünftig weiter vorantreiben werden. So planen wir konkret durch den Einsatz länderspezifischer Stores, eigenen Währungen und neuer Sprachen die Internationalisierung zu stärken“, blickt Kruse gespannt nach vorne. Auch hierfür bieten sich für ARMEDANGELS mit Shopware 6 durch Fähigkeiten wie Multi-Währung und Multi-Language oder konfigurierbare Steuerkalkulationen beste Voraussetzungen. Martin Weinmayr fasst das Projekt ebenfalls überaus positiv zusammen: „Insgesamt sind wir sehr stolz auf das, was zusammen geleistet wurde und wir freuen uns auf die weitere Zusammenarbeit, in der wir die Plattform Monat für Monat optimieren und ausbauen – ganz nach dem Motto THINK – CONCEPT – CODE – DEPLOY – MEASURE – REPEAT“.

• Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

“The coronavirus pandemic situation has taken the central stage, so in light of the current situation, it would not be possible for us to satisfy our customers’ requirements for such an international trade fair as JEC World in June. We truly regret having to make this difficult decision once again. However, we are all committed, starting today, to deliver the best JEC World experience to our clients in 2022.” says Eric Pierrejean, CEO of JEC Group. “While waiting for welcoming the international composites community back to Paris in March 2022, JEC Group team is preparing various online Rendez-Vous in June enabling the entire composites community to discover trends and innovations, and to connect″, he added.

The leading composites event will take place from March 8 to 10, 2022, at Paris Nord Villepinte (same venue) and online for a new augmented experience.

As the leading trade show of the composites industry, JEC World will bring together the whole composites materials value chain and professionals from application sectors, experts from the scientific and academic world, associations, and media from more than 112 countries, introducing in 2022 its audience its new digital platform, JEC World Augmented.

“JEC World 2022 and the augmented platform  will bring the international composites community and specialists together to resume business, network, hold business meetings. They will also have the chance to participate in conferences, workshops, and discover the latest composites innovations,” says Adeline Larroque, Show director and EMEA events.

2020 financial year: operating profit thanks to profitable second half-year Due to the pandemic-related decline in global vehicle production, Autoneum's revenue in local currencies decreased by –18.7% in 2020. Thanks to a global cost reduction program and improvements from the turnaround program in North America, Autoneum achieved an EBIT margin of 1.6%. Furthermore, the significantly increased free cash flow of CHF 112.5 million enabled a substantial reduction in net debt (excluding lease liabilities) of CHF –63.3 million.

2020 was marked by the coronavirus pandemic and its massive impact on the global economy. Worldwide lockdowns and production stoppages at vehicle manufacturers had drastic consequences for the entire automobile industry and Autoneum in the first half of the year. Although the market recovered in the second half-year, the number of vehicles produced for the year as a whole remained well below the level of the previous year. Thanks to prompt adjustment of the cost structure to the reduced market volume and improvements achieved during the turnaround in North America, Autoneum nevertheless managed to generate an operating profit in 2020 in an extremely difficult and volatile market environment.

Please find more details in attached PDF file.