From the Sector

Reset
30 results
Devan high cooling Photo: Devan Chemicals
09.01.2024

Devan Chemicals presents latest sustainable textile finishes at Heimtextil 2024

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

R-Vital® NTL Chamomile oil: Chamomile oil is known for its moisturizing and soothing properties. Additionally, this oil is believed to have antioxidant and inflammatory properties. Furthermore, chamomile oil is renowned for its calming effects and potential to reduce stress and anxiety, helping improve sleep quality.

R-Vital® NTL Warming: Engineered to deliver a gentle warmth, the R-Vital NTL Warming technology ensures a cozy and comfortable sleeping experience. This blend is a solution that infuses a sense of warmth, promoting physical and emotional well-being.

R-Vital NTL Arnica Montana: Harnessing the natural benefits of Arnica Montana, this ingredient, is celebrated for its potent healing and recovering properties.

At Heimtextil Devan will also present a new high cooling technology that provides an optimal and refreshing sleeping climate, ensuring a cool and restful night's sleep. Thermic High Cooling is based on reactive microencapsulated Phase Change Materials (PCMs). The smart heat exchange mechanism keeps the body within its comfort zone. This makes the body suffer less from night sweats, and results in a longer, healthier and more comfortable sleep with fewer awakenings. This new formulation with high cooling level and high solid content, presents around 30% more cooling than standard PCM formulations. One padding allows to achieve high cooling level (no need to run multiple applications). A Bio-based version is also available - Thermic® Bio, where the PCMs are derived from sustainable, natural sources.

Source:

Devan Chemicals

Better sleep environment Photo Heiq Materials AG
28.12.2023

Biobased HeiQ technologies for better sleep at Heimtextil 2024

HeiQ’s biobased textile technologies are set to show how they can change the sleep environment for the better while meeting an increasing demand for sustainable solutions that are in tune with nature. HeiQ Skin Care, HeiQ Allergen* Tech, HeiQ Cool, and HeiQ Mint are going to be showcased at the Heimtextil show in Frankfurt beginning of January.

HeiQ presents a complete set of tailored textile technologies that is said to improve the sleeping environment: "Unlocking Better Sleep". Therefore, HeiQ introduces a range of innovative products designed to enhance the quality of a comfortable night’s rest through sustainable and biobased solutions.

HeiQ’s biobased textile technologies are set to show how they can change the sleep environment for the better while meeting an increasing demand for sustainable solutions that are in tune with nature. HeiQ Skin Care, HeiQ Allergen* Tech, HeiQ Cool, and HeiQ Mint are going to be showcased at the Heimtextil show in Frankfurt beginning of January.

HeiQ presents a complete set of tailored textile technologies that is said to improve the sleeping environment: "Unlocking Better Sleep". Therefore, HeiQ introduces a range of innovative products designed to enhance the quality of a comfortable night’s rest through sustainable and biobased solutions.

According to a recent study by the School of Architecture, Victoria University of Wellington (New Zealand), “individuals spend more than 50% of their time at home in the bedroom”. Another research from the Fatigue Countermeasures Laboratory, NASA Ames Research Center (United States), concluded that “sleep is critical to health and daytime functioning. For individuals to achieve optimal sleep, they must have access to a sleep environment that allows them to achieve quality sleep.” These are strong indicators that we should treat sleep with the highest importance that it deserves.

The flagship products leading this positive change are the 100% biobased cosmetic technology HeiQ Skin Care, the plant-based deodorizer HeiQ Mint (botanical freshness), the dual action cooling solution HeiQ Cool, and HeiQ Allergen Tech that reduces exposure to inanimate allergens through active probiotics. These biobased innovations are set to redefine the sleep experience and contribute to overall well-being.

HeiQ Skin Care is the most recent addition to HeiQ’s portfolio - a synbiotic textile finish promoting a balanced microbiome for glowing skin. Unlike conventional products, HeiQ Skin Care utilizes pre- and probiotics integrated into a biobased matrix, offering long-lasting cosmetic benefits. It is particularly suited for products that are in direct and long contact with skin, such as pillowcases, duvet covers or bed sheets, acting as a cosmetic care session during sleep.

Source:

Heiq Materials AG

Freudenberg: Sustainable microfiber solution for artificial leather applications (c) Freudenberg Performance Materials Holding GmbH
Evolon® sustainable microfiber coating substrate for artificial leather
19.07.2023

Freudenberg: Sustainable microfiber solution for artificial leather applications

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Evolon® sustainable microfiber coating substrates
Evolon® microfiber fabrics are ideal coating substrates for artificial leather applications in the shoe, furniture and car industries. They are particularly suitable as a carrier material for PU and PVC coatings. Evolon® microfiber materials have non-fraying edges, which makes converting easier and quicker. They contain 80% recycled PET from Freudenberg’s in-house bottle recycling plant. Furthermore, they are manufactured with no solvent and no chemical binder in the company’s Evolon® plant located in Colmar, France. The plant is accredited according to OEKO-TEX STeP sustainability manufacturing certification and the DETOX TO ZERO criteria. European manufacturing offers logistic benefits to European customers through shorter supply chain and transport routes.

Reinforcement material for leather goods
Manufacturers of leather goods also benefit from Evolon® microfiber when they use it as a reinforcement material for original leather. It is drapable and soft and provides optimal shaping support for leather. In addition, Evolon® materials offer important sustainability advantages for the manufacturing of luxury leather bags, such as being 100% made in Europe, eco-friendly and socially-responsible production, and the use of recycled raw materials.

Source:

Freudenberg Performance Materials Holding GmbH

(c) Freudenberg Performance Materials Holding GmbH
28.04.2023

Freudenberg showcases Superabsorbers and Coated Foams at EWMA 2023

Freudenberg Performance Materials (Freudenberg) is expanding its product portfolio by adding an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Further highlights at EWMA include components for more sustainable wound care, PU foams with directly applied silicone adhesives, antimicrobial systems and an innovative hydrophilic debridement foam. The global manufacturer will be welcoming visitors to Exhibition Stand from May 3 – 5 at EWMA 2023.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Freudenberg Performance Materials (Freudenberg) is expanding its product portfolio by adding an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Further highlights at EWMA include components for more sustainable wound care, PU foams with directly applied silicone adhesives, antimicrobial systems and an innovative hydrophilic debridement foam. The global manufacturer will be welcoming visitors to Exhibition Stand from May 3 – 5 at EWMA 2023.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Further highlights
Freudenberg is also presenting the M 1714 wound pad component, one example of a sustainable solution that simultaneously delivers on performance. The dressing consists of bio-based fibers and exhibits a smooth wound contact layer. M 1714 has been evaluated for industrial compostability and conforms to ISO 13432. This enables certification of product biodegradability. Further highlights to be presented in Milan include material systems for the antimicrobial treatment of chronic wounds, including systems that do not use active substances.

Wound dressing with silicone adhesive border
With Freudenberg’s silicone coated foams, manufacturers can reduce the number of process steps, thereby avoiding waste, saving energy and simplifying the supply chain. Compared with conventional foam dressings, the Freudenberg foam product also offers higher flexibility for optimal wound bed contouring and reduces the risk of infection by preventing exudate pooling. Freudenberg is showcasing the prototype of a bordered dressing with a silicone adhesive border. In addition, the variant with an extra-strong silicone border enables longer wear time while at the same time ensuring minimal adherence to new skin that forms at the wound edges.

More effective cleansing results and greater patient comfort
Freudenberg is also showcasing an innovative hydrophilic debridement foam. It is ideally suited for use in wound cavities, offers better cleansing results and reduced risk as well as greater patient comfort.

Source:

Freudenberg Performance Materials Holding GmbH

(c) Kelheim Fibres GmbH
14.04.2023

Kelheim Fibres to present bio-based hygiene solutions at INDEX™23

Absorbent hygiene products such as diapers, sanitary pads, and incontinence products are an integral part of our daily lives. However, most of these products contain synthetic components and contribute to the global plastic waste problem. The search for alternatives is becoming increasingly urgent. The catch is that only innovations that offer the same performance and reliability as conventional products can be successful in the market. After all, no one wants to compromise in such a sensitive area as personal hygiene.

Kelheim Fibres is currently working on various development projects to design fully biobased AHP (absorbent hygiene product) concepts that do not compromise on performance. In this area, the company continues to focus on its wood-based specialty fibres, which the tampon industry has trusted for decades. However, the requirements for AHP products differ, as each layer must fulfil a specific function.

Absorbent hygiene products such as diapers, sanitary pads, and incontinence products are an integral part of our daily lives. However, most of these products contain synthetic components and contribute to the global plastic waste problem. The search for alternatives is becoming increasingly urgent. The catch is that only innovations that offer the same performance and reliability as conventional products can be successful in the market. After all, no one wants to compromise in such a sensitive area as personal hygiene.

Kelheim Fibres is currently working on various development projects to design fully biobased AHP (absorbent hygiene product) concepts that do not compromise on performance. In this area, the company continues to focus on its wood-based specialty fibres, which the tampon industry has trusted for decades. However, the requirements for AHP products differ, as each layer must fulfil a specific function.

To meet these requirements, Kelheim Fibres has developed a range of functionalized specialty fibres, including hydrophobic Olea, trilobal Galaxy®, and the hollow fibre Bramante. These specialty fibres ensure optimal results in every layer of the AHP product.

All of Kelheim's fibres are manufactured from 100% wood pulp derived from certified and sustainably managed forests. They are fully biodegradable - microorganisms in soil and seawater ensure that no residues remain.

A current example of such a partner project is the development of a completely bio-based panty liner with the nonwovens manufacturer Sandler and the hygiene products manufacturer pelzGROUP, which is due to be launched on the market shortly.

In addition to new projects in the field of biobased disposable and reusable solutions, Kelheim will also present its tried and tested fibres at INDEX™23, for example for tampons or flushable wipes.

Source:

Kelheim Fibres GmbH

Photo: Reifenhäuser GmbH & Co. KG Maschinenfabrik
08.09.2022

Ulrich Reifenhäuser receives the Georg Menges Award

Ulrich Reifenhäuser, CSO of the Reifenhäuser Group, was awarded the prestigious Georg Menges Prize 2022 at the 31st International Colloquium on Plastics Technology in Aachen from September 7-8, 2022. The prize recognizes individuals or groups who have rendered outstanding services to the transfer of research results into industrial practice. The sponsors of the award are the Plastics and Rubber section of Germany's Mechanical Engineering Industry Association (VDMA), together with PlasticsEurope Deutschland and the Association of Sponsors of the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH University. The award is traditionally presented every two years during the colloquium organized by the IKV. Ulrich Reifenhäuser is the first businessman to receive the Georg Menges Award.

Ulrich Reifenhäuser, CSO of the Reifenhäuser Group, was awarded the prestigious Georg Menges Prize 2022 at the 31st International Colloquium on Plastics Technology in Aachen from September 7-8, 2022. The prize recognizes individuals or groups who have rendered outstanding services to the transfer of research results into industrial practice. The sponsors of the award are the Plastics and Rubber section of Germany's Mechanical Engineering Industry Association (VDMA), together with PlasticsEurope Deutschland and the Association of Sponsors of the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH University. The award is traditionally presented every two years during the colloquium organized by the IKV. Ulrich Reifenhäuser is the first businessman to receive the Georg Menges Award.

The award was presented by Professor Dr.-Ing. Christian Hopmann, Director of the IKV and Dr.-Ing. Herbert Müller, Chairman of the Board of the IKV Sponsors' Association. In his laudatory speech, Professor Hopmann highlighted Ulrich Reifenhäuser's great and successful commitment to the industry and his tireless search for optimal solutions that are sustainable in the best sense of the word, and praised him as a personality of integrity and integration. "The Georg Menges Prize is awarded for the consistent implementation of research and innovation in industry. The previously described achievements of our prizewinner would certainly have been enough to receive the award but, for the sponsors of the Prize, what was especially important and the key argument for their decision was Ulrich Reifenhäuser’s honorary dedication to the K tradefair," explained Professor Hopmann.

Ulrich Reifenhäuser has been a member of the Reifenhäuser Group management since 1992 and is responsible for international line sales. Together with his brother Bernd Reifenhäuser, he manages the company in the third generation. Ulrich Reifenhäuser has been a board member of the VDMA Plastics and Rubber Machinery Association for more than 25 years and has been its chairman since 2010. In 2020, he was inducted into the Plastics Hall of Fame, as was the award's namesake, and in 2022 he will be co-chairing the world's leading plastics trade fair in Düsseldorf for the seventh time in a row as "President of K show."

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

(c) Freudenberg Performance Materials
23.08.2022

Freudenberg at Lineapelle with sustainable materials for leather goods

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

The binder-free strobel material is made from 100% recycled PET. It is GRS-certified for reliable traceability. The GRS certification recognizes the share of recycled materials in the strobel material. This allows customers to calculate the total amount of recycled material in shoes. Moreover, the mono-component material itself is fully recyclable. In terms of performance, the material is lightweight and also demonstrates a high tensile strength.

Made from nonwoven fabric, the innovative crimping material optimally combines high permanent moldability and shape retention with flexibility and suppleness. This crimping material enables manufacturers to reduce their production costs, while consumers benefit from increased comfort. Compared to conventional knitted fabric-based crimping materials, the nonwoven crimping material offers multi-directional stretching properties, improved fitting, greater design freedom and reduced weight.

Source:

Freudenberg Performance Materials

© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres

Trützschler Man-Made Fibers new TEC-O40 system for industrial yarn (c) Trützschler
Trützschler Man-Made Fibers new TEC-O40 system for industrial yarn
02.06.2022

Trützschler at Techtextil 2022

At this year’s Techtextil in Frankfurt/Main (June 21st to June 24th) Trützschler Nonwovens, Trützschler Card Clothing and Trützschler Man-Made Fibers present various new and proven solutions for the nonwoven, card clothing and man-made fiber sectors. Join us at booth D80 in hall 12.0!

Trützschler Nonwovens invites to talk sustainable fibers such as hemp or linen and out-of-the-box fibers such as nettle and pineapple fibers. Our solutions for manufacturing innovative nonwoven products include machinery and complete production lines for paper grade pulp, re-generated cellulose fibers, cotton and various other natural fibers.

What happens when sustainable meets digital? Trützschler Nonwovens and software partner Proptium introduce T-ONE, our new digital working environment for both fiber- and polymer-based nonwoven producers. T-ONE supports routine tasks such as quality control and recipe management but also enables systematic line monitoring and data collection for T-ONE’s line optimizations.

At this year’s Techtextil in Frankfurt/Main (June 21st to June 24th) Trützschler Nonwovens, Trützschler Card Clothing and Trützschler Man-Made Fibers present various new and proven solutions for the nonwoven, card clothing and man-made fiber sectors. Join us at booth D80 in hall 12.0!

Trützschler Nonwovens invites to talk sustainable fibers such as hemp or linen and out-of-the-box fibers such as nettle and pineapple fibers. Our solutions for manufacturing innovative nonwoven products include machinery and complete production lines for paper grade pulp, re-generated cellulose fibers, cotton and various other natural fibers.

What happens when sustainable meets digital? Trützschler Nonwovens and software partner Proptium introduce T-ONE, our new digital working environment for both fiber- and polymer-based nonwoven producers. T-ONE supports routine tasks such as quality control and recipe management but also enables systematic line monitoring and data collection for T-ONE’s line optimizations.

Trützschler Man-Made Fibers introduces the OPTIMA-based, versatile TEC-O40 and TEC-O80 systems for extruding and spinning industrial yarns (IDY). The modular OPTIMA platform is highly flexible and adaptable to manufacturing a broad spectrum of (semi-)industrial yarns from polyamide, polypropylene or polyester.

 cooperation of ELA and ELCA (c) Sébastien D‘Halloy
At this year's JEC World in Paris, the future cooperation of ELA and ELCA was sealed to strengthen lightweight technology in Europe. Image: from left to right: Freek de Bruijn, Jean Pierre Heijster, Wolfgang Seeliger, Laure, Carsten Lies, Eric Pierrejean, Cécile Bedouet, Ricardo del Valle, Aitor Hornés, Emma Arussi, Lena Wollbeck
18.05.2022

Strong partnership for European lightweight technology

Cooperating alliances for lightweight technology: The European Lightweight Association (ELA) and the European Lightweight Clusters Alliance (ELCA) have decided to work together. Both European lightweight clusters are united by the common goal of giving the enormous economic and ecological potential of lightweight technology more visibility in politics, business and science at European, national and regional level. In addition, complementary expertises of work form the basis for the future partnership, from which European lightweight technology can optimally benefit.

"We see great potential in the future cooperation of the ELA and the ELCA to advance lightweight technology in Europe with combined forces," says Dr Katharina Schöps as representative of the ELCA. "In this way, we are strengthening the global competitiveness of European companies and at the same time making a significant contribution to climate protection," says Jean-Pierre Heijster of the ELA about the cooperation of the European lightweight technology networks.

Cooperating alliances for lightweight technology: The European Lightweight Association (ELA) and the European Lightweight Clusters Alliance (ELCA) have decided to work together. Both European lightweight clusters are united by the common goal of giving the enormous economic and ecological potential of lightweight technology more visibility in politics, business and science at European, national and regional level. In addition, complementary expertises of work form the basis for the future partnership, from which European lightweight technology can optimally benefit.

"We see great potential in the future cooperation of the ELA and the ELCA to advance lightweight technology in Europe with combined forces," says Dr Katharina Schöps as representative of the ELCA. "In this way, we are strengthening the global competitiveness of European companies and at the same time making a significant contribution to climate protection," says Jean-Pierre Heijster of the ELA about the cooperation of the European lightweight technology networks.

Together, ELCA and ELA represent a growing network of more than 4,500 companies and more than 600 research institutions from 12 European countries active in lightweight technology across different
sectors and industries. This brings together the two largest lightweight technology communities in Europe. Lightweight solutions from Europe can thus gain visibility and be implemented more quickly in global markets.

Joining forces to strengthen lightweight technologies ́ market position at the European level ELCA and ELA want to improve the positioning of lightweight technologies and materials with joint activities and events, in particular to prioritise them on the agenda of the European Commission. The cooperation thus wants to send a clear signal to Brussels. Especially with the view to achieve European climate protection goals; lightweight technology has the potential to conserve valuable resources and reduce CO 2 emissions. At the same time, the improved sustainability with the same or even optimised performance brings valuable competitive advantages for companies. Lightweight products and technologies Made in Europe can thus become a unique selling point for European stakeholders on international markets.

With this cooperation, ELCA and ELA combine their respective strengths: ELCA, as the European Lightweight Clusters Alliance, has very successfully created a resilient pan-European innovation ecosystem for lightweight technology in recent years. ELA, on the other hand, is particularly characterised by its close ties to industrial users. As a result, the existing ecosystem is enriched and a more demand-oriented development and faster market introduction is made possible. In this way, both lightweight technology networks will complement each other optimally in the future in order to bring technology and markets together in a targeted manner.

Kornit Rewrites the Rules for Fashion and Textiles (c) Kornit
Shai-Shalom-Hi2
06.04.2022

Kornit Rewrites the Rules for Fashion and Textiles

  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today fr
  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today from major limitations with mass customization of polyester

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, announced today the Company will present the convergence of design, technology, and sustainable fashion at Kornit Fashion Week Tel Aviv 2022, April 3rd – 6th. Rewriting the rules for fashion and textiles, the transformative event will unveil vibrant runway collections together with game-changing industry-first product and technology introductions that bring digital production to the mainstream.

The four-day event is attended by some of the top designers, retailers, brands, fulfillers, and ecommerce players, in addition to global investors and press – and will include exclusive VIP experiences demonstrating the confluence of the design, technology, and fashion worlds. Together, these three elements are central to Kornit’s 4.0 strategy, bringing sustainable, on-demand fashion to the mainstream with end-to-end workflow solutions.

Kornit Fashion Week Tel Aviv 2022

Kornit Fashion Week features an immersive runway showcase produced by worldwide fashion icon, producer, director, and entrepreneur Motty Reif. The week follows successful Kornit events in 2021 across Los Angeles, New York, Milan, and Tel Aviv – displaying the creative freedom associated with sustainable, on-demand fashion fulfillment. Attendees will experience runway events showcasing designer creativity across a broad array of collections. These fascinating collections were created in just a few weeks, unlike typical fashion and textile production processes that take over six months.

Industry-First Introductions

Looking behind the scenes at Kornit Fashion Week, attendees will witness Kornit’s disruptive mass production technology in action. Unveiled for the first time, the Kornit Apollo direct-to-garment (DTG) system addresses accelerated post-pandemic market trends for streamlined supply chains and production nearshoring. Demonstrated at an exclusive VIP event, Kornit Apollo features the Company’s proven MAX technology offering the highest retail quality combined with full automation control and integrated smart curing processes, utilizing functionality from Lichtenau, Germany-based Tesoma (Kornit’s recently announced acquisition). The solution is the most comprehensive digital, single-step end-to-end system for nearshore short-and-medium-runs mass production and offers optimal TCO and highest output per operator. The result far surpasses performance of screen printing and analog techniques. With early customer engagements in the second half of 2022, the system will be available mid-2023.

Physical and Virtual Worlds

Kornit enables customers to exchange supply chain headaches and materials waste for unsurpassed creativity and a frictionless pixel-to-parcel-to-doorstep production experience. Supported by the KornitX workflow solution, customers have access to a scalable and modular ecosystem for on-demand decorated apparel and textiles. Supporting diverse supply chain models, the infrastructure-agnostic system enables on-demand, automated production, end-to-end from initial order to package delivery.

Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability © ROICA™
Sportswear top by Cifra containing ROICA™
06.04.2022

ROICA™ : new generation of sportswear

  • Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability
  • Performance Days, Hall C1 – stand N08

Cifra, a leading Italian company in Warp Knit Seamless, has chosen ROICA™ by Asahi Kasei, an international reference for premium and smart stretch, for a new generation of clothing dedicated to wellbeing, travelwear and athleisure, made with Cifra exclusive and patented technology in the name of uniqueness and sustainability.

Innovative garments for men and women that combine fashion and function, guaranteeing optimal comfort at any time of the day. Base layers, tops, leggings, jumpsuits made with natural yarns, or recycled pre and post-consumer yarns in combination with ROICA™ EF, the first recycled stretch yarn certified Global Recycled Standard (GRS) able to complete proposals that offer design, performance and responsibility.

  • Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability
  • Performance Days, Hall C1 – stand N08

Cifra, a leading Italian company in Warp Knit Seamless, has chosen ROICA™ by Asahi Kasei, an international reference for premium and smart stretch, for a new generation of clothing dedicated to wellbeing, travelwear and athleisure, made with Cifra exclusive and patented technology in the name of uniqueness and sustainability.

Innovative garments for men and women that combine fashion and function, guaranteeing optimal comfort at any time of the day. Base layers, tops, leggings, jumpsuits made with natural yarns, or recycled pre and post-consumer yarns in combination with ROICA™ EF, the first recycled stretch yarn certified Global Recycled Standard (GRS) able to complete proposals that offer design, performance and responsibility.

The design of the garments, created in Cifra's design office, combines a perfect shape with body mapping technology that creates dedicated ventilation zones for a feeling of comfort and freshness as well as an innovative aesthetic impact.

And when it comes to comfort, ROICA™ activates a new generation conversation linked to the demands of the contemporary consumer looking for well-being in line with the concepts of safety and healthiness emerging in all aspects of daily life. In fact, ROICA™ by Asahi Kasei is the secret stretch ingredient of the modern wardrobe, able to "activate" garments by giving comfort, beauty, quality together with responsible and certified values.

All of this translates into the synergy of development with Cifra. The products, the materials that compose them, along with the way of production and who produces them, transparency and traceability are all aspects that become an integral part of the common proposal that Cifra and ROICA™ are able to offer by joining forces.

"We firmly believe in the new generation of companies oriented towards the creation and supply of valuable products, fully respecting people and the environment, while meeting the performance required by contemporary lifestyles," says Shinichiro Haga, Senior Executive Manager of the ROICA™ Division.

Graphic: Premium Group
14.03.2022

Premium Group: Details of the new Event Cosmos in Berlin

For the summer events at the Berlin exhibition center, the Premium Group is relying on a new mix of fashion, business, content and entertainment.

The State of Style & Culture
The Premium Group is expanding its portfolio in the summer to include the consumer festival THE GROUND in addition to the existing PREMIUM and SEEK trade fairs and is presenting numerous innovations for the long-awaited reunion of the industry in Berlin.

The new location Messe Berlin will become the Premium Group cosmos, a holistic inspirational hub for all relevant topics related to fashion, trends, retail, lifestyle, marketing, digitization, sustainability, metaverse and more.

In July, brands and partners can also present themselves to end consumers for the first time as part of the new event THE GROUND, 'Direct to Consumer'. Consumers get access to THE GROUND, while trade visitors are invited to view the full range and be inspired throughout the site.

For the summer events at the Berlin exhibition center, the Premium Group is relying on a new mix of fashion, business, content and entertainment.

The State of Style & Culture
The Premium Group is expanding its portfolio in the summer to include the consumer festival THE GROUND in addition to the existing PREMIUM and SEEK trade fairs and is presenting numerous innovations for the long-awaited reunion of the industry in Berlin.

The new location Messe Berlin will become the Premium Group cosmos, a holistic inspirational hub for all relevant topics related to fashion, trends, retail, lifestyle, marketing, digitization, sustainability, metaverse and more.

In July, brands and partners can also present themselves to end consumers for the first time as part of the new event THE GROUND, 'Direct to Consumer'. Consumers get access to THE GROUND, while trade visitors are invited to view the full range and be inspired throughout the site.

PREMIUM: New tripartition with new segments
In order to be able to show all relevant segments of advanced contemporary fashion even better and more holistically, the PREMIUM portfolio will be divided into three new areas from the summer. With the segmentation into High, Icon & Volume, large, commercially successful brands as well as more focused designer brands, newcomers and smaller innovators will now find their place. Here the PREMIUM fashion team advises all partners in detail in order to guarantee ideal positioning and the possibility of storytelling.

SEEK: Premiere of the SEEK Conscious Club
Sustainability has been part of the culture of the SEEK brand since it was founded 12 years ago. With the new SEEK Conscious Club, in addition to the SEEK area with well-known and new SEEKERS, a dedicated area for sustainable brands is being created. SEEK offers them the stage and space to grow and the attention to optimally spread brand values. The international SEEK community is represented by niche brands as well as commercially successful players. And the established TRADE UNION for brands with a particularly sharp sales strategy will once again have an exclusive area in the new location.

THE GROUND: Festival for Style & Culture
With the new Direct to Consumer Festival THE GROUND, the Premium Group is now also inviting Gen-Z, Gen-Y and Culture Pioneers once a year. Music acts, panels and live talks with well-known speakers and influencers, creative workshops, sports and wellbeing sessions are intended to inspire, enrich, enlighten and inspire exchange: entertainment, edutainment and experiences.

THE GROUND turns live streams into live encounters, consumers into co-creators and classic retailers into strategic marketing and event partners. Here, through emotional experiences and unique showcases, brands can be experienced and interested customers become loyal brand fans. Topics relevant to society and generations, such as fashion, sports, beauty & well-being, metaverse & gaming, will be featured in the area as well as in talks and master classes as part of the FASHIONTECH content format.

"In order to remain sustainable, we want and need to merge B2B and D2C and create a place - a marketplace for ideas and products - where brands, retailers and consumers come together and learn from each other. For the first time, we are offering holistic reach, synergy and network effects,” explains Jörg Arntz, Managing Director Premium Group.

“B2B and D2C will take place in parallel on one site, although of course there will still be an area for professionals only, i.e. exclusively for the industry. The D2C area is accessible to both end consumers and trade visitors. In addition to our trade fairs, we create new content from which our visitors and exhibitors benefit.”

During the event, which will take place from Thursday to Saturday for the first time, it will be about exchange, trends, inspiration and emotion, new brands, the further development of well-known players, creative collection presentations and of course what the fashion world and its protagonists * inside: joy and passion. In order for this to work and for the long-term existence of the new event concept in Berlin to be guaranteed, everyone involved is asked, challenged and responsible.
 
Selected brand highlights:
American Vintage // Aigner // At.p.Co  // Ben Sherman // Blue de Geñes // Buffalo // Camper // C.O.F. Studio // Copenhagen Studios // Coster Copenhagen // Crep Protect // Denham // Dstrezzed // Drykorn // Ecoalf 1.0 //  Edwin // Ellesse // Fabienne Chapot //  Fleurs de Bagne // Floris Van Bommel // Gant //  Happy Socks // Helene Galwas // Herrlicher // Hiltl //  Horizn Studios // Ilse Jacobsen // Izipizi Paris // Kangaroos // Kennel & Schmenger Schuhmanufaktur // Keen // K-Swiss // Lee // Merz b. Schwanen // Moss Copenhagen // Nautica  // Novesta // Nudie Jeans //  O My Bag // Pantofola D’Oro 1886  // People of Shibuya // Palladium // Pendleton Woolen Mills // Puma // Property Of //  Reyn Spooner // Sandqvist // Saucony // Studio Seidensticker // Stutterheim // Sofie Schnoor // Steve Madden // Thinking Mu // Ucon Acrobatics //  Uniform Bridge // Veja // Womsh // Wool & Co // Wrangler// Yaya // Zespá

Source:

Premium Group

19.01.2022

Zünd at JEC World 2022

  • Smart Workflows for Digital Cutting & Kitting

At JEC World 2022 in Paris, Zünd presents the latest developments in modular cutting solutions for composites. Known for its expertise in digital cutting and workflow integration.
As specialist in digital cutting for composites applications, Zünd demonstrates how data management, digital cutting, and downstream processes such as picking, sorting, and kitting, can be automated intelligently and based on specific needs.

In Industry 4.0 in general and processing composites in particular, an unencumbered flow of data is key to workflow efficiency. With Zünd PreCut Center, the user is well equipped to handle the challenges of demanding manufacturing processes. The software automatically optimizes contours and adjusts cut paths depending on the material and choice of tools. With the integrated nesting function, parts are laid out automatically for optimal material utilization. Considering the high cost of materials, maximum yield is essential for economical digital cutting.

  • Smart Workflows for Digital Cutting & Kitting

At JEC World 2022 in Paris, Zünd presents the latest developments in modular cutting solutions for composites. Known for its expertise in digital cutting and workflow integration.
As specialist in digital cutting for composites applications, Zünd demonstrates how data management, digital cutting, and downstream processes such as picking, sorting, and kitting, can be automated intelligently and based on specific needs.

In Industry 4.0 in general and processing composites in particular, an unencumbered flow of data is key to workflow efficiency. With Zünd PreCut Center, the user is well equipped to handle the challenges of demanding manufacturing processes. The software automatically optimizes contours and adjusts cut paths depending on the material and choice of tools. With the integrated nesting function, parts are laid out automatically for optimal material utilization. Considering the high cost of materials, maximum yield is essential for economical digital cutting.

With Pick&Place, Zünd presents a cost-effective solution for fully automated picking and kitting of cut parts. The Pick&Place interface enables direct communication with the robot via Zünd Cut Center – ZCC, the Zünd operating software and user interface. Pick&Place makes it possible to completely automate parts removal, kitting and placing. The necessary parameters are derived from the metadata supplied with the job order.

Source:

Zünd Systemtechnik AG

06.01.2022

Maison & Objet Paris postponed from January to March 2022

Since few days, most countries have been facing a new wave of Covid, reinforced by the rapid expansion of the Omicron variant. Impacted by this surge, many companies among the 1,700 companies that have confirmed they will attend M&O in January at the Parc des Expositions of Paris-Nord Villepinte, indicate that they don’t want their employees to take risks and are now alerting to the disruptions they are experiencing in their operations. The obligations of compliance with isolation rules, even when people are vaccinated, and the numerous work absences are in fact starting to seriously disrupt the functioning of their services, supply or production circuits.

Moreover, facing the peak of contamination, several countries are currently taking restrictive measures regarding international travel. Measures which are now delaying or discouraging visitors from confirming their attendance. In addition, the French government has announced, December 27th 2021 a 2.000 people gauge for major events, so probably fairs such as Maison&Objet Paris.

Since few days, most countries have been facing a new wave of Covid, reinforced by the rapid expansion of the Omicron variant. Impacted by this surge, many companies among the 1,700 companies that have confirmed they will attend M&O in January at the Parc des Expositions of Paris-Nord Villepinte, indicate that they don’t want their employees to take risks and are now alerting to the disruptions they are experiencing in their operations. The obligations of compliance with isolation rules, even when people are vaccinated, and the numerous work absences are in fact starting to seriously disrupt the functioning of their services, supply or production circuits.

Moreover, facing the peak of contamination, several countries are currently taking restrictive measures regarding international travel. Measures which are now delaying or discouraging visitors from confirming their attendance. In addition, the French government has announced, December 27th 2021 a 2.000 people gauge for major events, so probably fairs such as Maison&Objet Paris.

Under these circumstances, seeking to avoid a risky situation and committed to making all efforts to ensure an optimal return on investment for exhibitors, buyers and specifiers, the SAFI decides to postpone the next session of the Maison&Objet trade event from 24th to 28th March 2022. Period for which we hope to see an improvement in the situation.

Exhibitors who have already confirmed their registration and location may have the same location conditions, which will allow them to keep the same stand showcase. Likewise, visitors who have already ordered their badges for the January edition will of course have access to the show from March 24th to 28th, 2022.

With an opening scheduled for the day before, Maison&Objet In The City, an event organised on the sidelines of the Maison&Objet fair and offering a journey of discoveries in the heart of Parisian showrooms, will be held from 23 to 28 March 2022.

By postponing the fair until the end of Q1, SAFI wishes to bring together the best operational and healthy conditions to allow actors in the art of living, decoration, and design to be inspired, to accelerate their development and to forge new business relationships

In summary: the next editions of the Maison&Objet fairs will therefore be: March 24th - 28th, 2022 + September 8th - 12th, 2022

More information:
Maison & Objet Omikron
Source:

S2H Communication

14.10.2021

Baldwin brings new connected technology to FEFCO Technical Seminar

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

For wide-format flexo corrugated box printing, Baldwin’s AMS Spectral UV has engineered CorruCure™, a new generation of LEDUV technology that offers more than a 60% reduction in power consumption in an ultra-compact UV lamp head. This revolutionary solid-state curing system, designed specifically for corrugated LED printing, emits almost no heat or ozone, and accommodates width-switching. It also enables the curing of high-value decorative solutions, such as full-gloss, spot and matte coating effects on a variety of corrugated substrates, making it the ideal addition for product enhancement.

Lastly, Baldwin’s FlexoDry2™ infrared dryer, developed for corrugated flexo printing presses, utilizes patented Diamond IR lamps capable of reducing energy consumption by up to 30%, when compared to traditional IR dryers with aluminum or gold reflectors. Dramatically improved drying enhances color definition, and reduces or eliminates marking, while allowing full-speed printing. The system offers an optional integrated hot-air knife with temperature control to provide better surface drying. Taking safety into consideration, the FlexoDry2 comes with an integrated safety light curtain as standard and an optional camera vision system.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

CHIC Shanghai starts on October 9, 2021 with around 500 brands (c) Chic Shanghai / JANDALI MODE.MEDIEN.MESSEN
28.09.2021

CHIC Shanghai starts on October 9, 2021 with around 500 brands

From the 09-11th of October, CHIC will take place with around 500 fashion and lifestyle brands on 53,000 sqm in the National Exhibition & Convention Center in Shanghai and offers a perfect overview of the fashion innovations in all fashion areas of the next season.

Chinese consumers place increasing value on sustainable products, the topic of "sustainability" is present in all areas of CHIC, in cooperation with WGSN the latest trends in sustainable fashion S / S 22 are shown. Together with China Fashion and WWD, companies that produce particularly sustainably are honored as part of the "Pursuer of excellence in sustainability" event.

The organizers put a special focus on the expansion of digital tools for the trade fair participants, which were used in the run-up to the trade fair for intensive visitor marketing and at the trade fair to optimally network supply and demand, WeChat plays a central role here. The CHIC WeChat mini program has been expanded and integrates the CHIC e-catalog, tailored to the needs of exhibitors and visitors.

From the 09-11th of October, CHIC will take place with around 500 fashion and lifestyle brands on 53,000 sqm in the National Exhibition & Convention Center in Shanghai and offers a perfect overview of the fashion innovations in all fashion areas of the next season.

Chinese consumers place increasing value on sustainable products, the topic of "sustainability" is present in all areas of CHIC, in cooperation with WGSN the latest trends in sustainable fashion S / S 22 are shown. Together with China Fashion and WWD, companies that produce particularly sustainably are honored as part of the "Pursuer of excellence in sustainability" event.

The organizers put a special focus on the expansion of digital tools for the trade fair participants, which were used in the run-up to the trade fair for intensive visitor marketing and at the trade fair to optimally network supply and demand, WeChat plays a central role here. The CHIC WeChat mini program has been expanded and integrates the CHIC e-catalog, tailored to the needs of exhibitors and visitors.

The next editions of CHIC will take place from 3-5th of November 2021 in Shenzhen and from 9-11th of March 2022 in Shanghai.

Source:

JANDALI MODE.MEDIEN.MESSEN

Enormes Interesse an virtueller interpack von Markt- und Innovationsführer Sappi (c) Sappi Europe
Sappi successfully ran its virtual interpack 2020 conference from 6 to 31 May.
23.06.2020

Huge interest in virtual interpack conference from the market and innovation leader Sappi

Sustainable solutions that pack a punch  

With over 6,500 visitors and more than 2,000 participants at a total of 720 minutes of live presentation sessions and with many potential new customers in the live info chat, the virtual interpack conference organised by Sappi was a resounding success. Sappi presented its latest developments, future prospects and current range of packaging and speciality papers at the event. In addition to further networking opportunities, the visitors took full advantage of the chance to get in contact with the Sales team.

Sustainable solutions that pack a punch  

With over 6,500 visitors and more than 2,000 participants at a total of 720 minutes of live presentation sessions and with many potential new customers in the live info chat, the virtual interpack conference organised by Sappi was a resounding success. Sappi presented its latest developments, future prospects and current range of packaging and speciality papers at the event. In addition to further networking opportunities, the visitors took full advantage of the chance to get in contact with the Sales team.

  • For the packaging of the future: sustainable, high-quality paper
  • Second-generation barrier papers ensure optimal protection of goods as food packaging
  • Providing what the world wants: fully recyclable packaging

Based on the motto ‘Pro Planet: Paper Packaging – welcome to the new pack-age’, the market leader in functional paper packaging presented numerous opportunities at its virtual interpack 2020 conference for its customers to package their food or non-food products in sustainable, premium packaging. In doing so, the company is contributing to the UN’s sustainability objectives. With the Sappi Guard range, Sappi presented barrier papers that render additional special coatings and laminations redundant and can be recycled in the paper stream. Featuring integrated barriers, they ensure that the product quality of foods and other goods is preserved. The second generation of barrier papers, now even more environmentally friendly, was also introduced at the virtual event. Another area of focus of the virtual interpack event was sealable papers, suitable for a wide range of packaging applications in the food and non-food sectors.

Of course, the concept of sustainability was also a key issue at the conference. As a home-compostable paper, Algro Nature meets the current demand for fully recyclable packaging. Sappi thus remains true to its goal of presenting its customers with more and more environmentally friendly solutions for the benefit of people and the environment.

‘We were overwhelmed by the success of our first virtual interpack conference, but we look forward to having direct contact again in spring 2021 in Düsseldorf,’ says Thomas Kratochwill, Vice President Sales & Marketing Packaging and Speciality Papers at Sappi Europe, with regard to the delayed interpack conference.

Source:

Marketing Communications Specialist Speciality Papers
Sappi Europe

PREMIUM GROUP in Berlin is cancelling its shows (c) Boris Kralj
Anita Tillmann
22.04.2020

PREMIUM GROUP in Berlin is cancelling its shows

  • The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with the leading global digital B2B marketplace, JOOR, there is still a guaranteed trading option.


Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July. Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.
     
A statement from Anita Tillmann, Managing Partner of the PREMIUM GROUP: 

  • The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with the leading global digital B2B marketplace, JOOR, there is still a guaranteed trading option.


Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July. Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.
     
A statement from Anita Tillmann, Managing Partner of the PREMIUM GROUP: 

“We greatly regret the decision of course, especially after the success of our January events. The ban on large-scale events has been around for some time and has been publicly discussed. It hurts us to do it, but we are also conscious of our responsibility. If cancelling our trade shows, conferences and parties contributes to the safety of our customers and visitors, then we have to take this step.
 
We are in close contact with all our brands and partners and have spent the last four weeks discussing possible approaches, concepts and new focal topics for the summer. The bottom line is that digitalisation is clearly the focus. It’s all about using the time over the next few months sensibly. The timing for brands and retailers is now right – all market participants are aware of the necessity of this.

We have been working closely with JOOR, the leading B2B marketplace globally, for around a year, after successfully integrating our own digital platform, Veee.com. JOOR has digitalised the entire procurement process and ensures a seamless, functioning wholesale process on an international scale – both for brands and retailers.
 
We shall shortly be offering webinars on this and can offer our customers an optimal, digital ordering solution so as to use this time of the pandemic efficiently. We are very happy with this option and our year-long investment in the topic of digitalisation. This has come good for us now.
 
Our trade show formats have been about more than just ordering for a long time now. They are about encounters, emotion, inspiration, communication and, finally, the fashion community getting together. Although lots can take place digitally nowadays, it doesn't replace physically meeting up in person. We have seen this more than ever in the present situation.
 
We are going to work on new concepts for 2021, and we will liaise with the key stakeholders in Berlin and with all others too to ensure we hit the ground running again. We’re taking on the challenge and will come back to the industry when we have news.”

Sappi at FESPA Global Print Expo (c) Sappi Europe
Sappi at FESPA Global Print Expo
20.02.2020

Sappi at FESPA Global Print Expo

Captivating colours, optimum cost efficiency and a sustainable value chain: these are some of the typical features of Sappi’s Inkjet and Dye Sublimation Papers. The global manufacturer will showcase its diverse, high-quality product ranges at FESPA Madrid, in hall 3, stand D30.

  • Transjet Drive dye sublimation paper tailored to industrial printing machines with a glue-belt system
  • Scrolljet, a large inkjet paper, with impressively razor-sharp lines
  • Digitally printed corrugated board with Fusion Topliner for consumer goods packing and displays

Eye-catching posters, textiles with excellent prints and labels that stand out clearly, this is how brand owners, advertising companies and retailers draw attention to themselves and their products. The comprehensive range of Sappi’s Dye Sublimation Papers, Inkjet Papers and Silicone Base Papers form the perfect basis for impressive brand communication. Customers and potential customers can come and convince themselves at this year’s FESPA event in Madrid, which takes place from 24 to 27 March.

Captivating colours, optimum cost efficiency and a sustainable value chain: these are some of the typical features of Sappi’s Inkjet and Dye Sublimation Papers. The global manufacturer will showcase its diverse, high-quality product ranges at FESPA Madrid, in hall 3, stand D30.

  • Transjet Drive dye sublimation paper tailored to industrial printing machines with a glue-belt system
  • Scrolljet, a large inkjet paper, with impressively razor-sharp lines
  • Digitally printed corrugated board with Fusion Topliner for consumer goods packing and displays

Eye-catching posters, textiles with excellent prints and labels that stand out clearly, this is how brand owners, advertising companies and retailers draw attention to themselves and their products. The comprehensive range of Sappi’s Dye Sublimation Papers, Inkjet Papers and Silicone Base Papers form the perfect basis for impressive brand communication. Customers and potential customers can come and convince themselves at this year’s FESPA event in Madrid, which takes place from 24 to 27 March.

Paper with impressive sustainable qualities
At its large exhibition stand in the Digital Printing hall, Sappi will showcase its Transjet range, which represents highest quality and optimal cost efficiency, offering also environmental advantages, such as low ink consumption and low transfer times. Minimal shrinkage of high elastic textiles is one of the key features of the Sportsline tacky grades. The special Transjet Drive, its extremely smooth backside and fast ink drying on the printable side, allow more efficient production on high-speed printers with glue belt systems. Sappi stands for much more than just the highest paper quality. Professional support through a special team of technical application engineers, Digital Solutions assist customers from their initial product idea to final production ensuring impressive results.

Differentiation through precision and sharpness
With its range of Inkjet papers, Sappi will demonstrate its considerable expertise in large format digital printing in Madrid. At the heart of the exhibition presentation is Scrolljet, a multi-layered coated paper for a wide range of outdoor applications, such as city light and mega light scrolling systems. DT-Plot and Swiss Matt are the best choice for graphic drawings and poster printing due to their exceptional colour results and the high precision and sharpness of the print.

Everything from a single, innovative source
When it comes to making classic packaging, shelf-ready packaging and POS displays stand out from the rest, marketing managers, brand owners and designers can always count on Fusion Topliner with its high degree of whiteness. As the topliner reproduces colours brilliantly and can be processed excellently, products made with this clearly stand out and attract attention. The product range presented by the paper and paperboard specialist is topped off by Silicone Base Papers for self-adhesive applications such as car wrapping, outdoor advertising and office supplies. This makes Sappi a versatile, long-term partner on which customers can rely. Sappi’s paper and paperboard thus go far beyond FESPA 2020: “Where colour comes alive.”

More information:
Sappi Europe Fespa Global Expo
Source:

Sappi Europe