From the Sector

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

• Turkish circular knitting market offers prospects in turbulent times

After a four-year, Covid-related break the German circular knitting machine manufacturer Mayer & Cie. is exhibiting with its Turkish representative Mayer Mümessillik (MMÜ) once more at the important International Textile Machinery Exhibition (ITM) in Istanbul. At Booth 713 in Hall 8, Mayer & Cie. will present three machines: the D4-2.2 X interlock machine, the OV 3.2 QCe for double jersey structures and the MV 4 3.2 II for single jersey fabrics. For the Mayer & Cie. and MMÜ team the focus will be on in-person contacts with customers, suppliers and partners. Despite the tense international situation both the manufacturer and its representative are positive about the medium-term outlook for the Turkish market.

Turkey is a market with prospects
“The challenges that the global economy faces are at present enormously wide-ranging, of course,” says Mayer & Cie.’s Turkey specialist Stefan Bühler. “The Russian invasion of the Ukraine, supply chain outages, shortages of raw materials and skyrocketing energy prices all create uncertainty.” And then there is galloping inflation in Turkey and elections in 2023. Yet despite, and in part because of, this state of affairs Bühler and Kahraman Güveri, CEO of Mayer & Cie.’s Turkish representative MMÜ, hold a positive view of the market outlook for the years ahead. Large orders, especially for standard products, are on the increase, Kahraman Güveri explains. That leads to new investments, new companies and a growing demand for refurbished machines that then need to be replaced by new machines elsewhere. And former commission merchants are now enterprises in their own right.

“Apart from that, Turkey benefits from its proximity to Europe, transport routes are manageable,” says Stefan Bühler. “This location advantage attracts brand manufacturers who together with their orders bring new approaches, new designs and new technologies into the country.” And Turkey’s already very highly developed textiles sector benefits too. That, says Kahraman Güveri, is why one can be confident for the next few years, “at least for as long as nothing unforeseen happens”.

Established machines with that something special: OV 3.2 QCe for double jersey structures
The portfolio of machines that Mayer & Cie. is exhibiting at the ITM is tried, trusted and popular. The OV 3.2 QCe is a specialist for interlock fabrics and double jersey structures that it knits in both filament and synthetic fibre yarns. With a conversion kit the OV 3.2 QCe also qualifies as a producer of 8-lock structures, spacer fabrics and fine gauges. The machine is available in a choice of three frames: from open-width and industrial to giant frame. Stefan Bühler, regional sales manager for Turkey, has this to say: “Not for nothing has the OV 3. 2 QCe been one of our most popular machines for years. It is mainly used for sportswear and for leisure- and outerwear.” In Istanbul the OV 3.2 QCe on show will be a 30-inch, E40-gauge model.

D4-2.2 X for fine rib and interlock fabrics
The double-jersey D4-2.2 X is an obvious choice for knitting fine rib fabrics of up to E28 gauge. Spacer and interlock fabrics are also part of the machine’s established repertoire. And it can produce elastomeric plating in both cylinder and dial cam. No matter which of these tasks is assigned to the D4-2.2 X, it performs it with impressive productivity.

MV 4 3.2 II for flexibility in the single jersey sector
In the single jersey sector, the long-established German firm delivers a literally fine solution. The MV 4 3.2 II on show at the ITM knits to an E38 gauge. The machine can also be supplied for gauges from E14 to E60. It is, in addition, highly flexible, with a repertoire that ranges from piqué and double piqué to one-thread fleece and smooth single jersey.

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Also available for video display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible because flat knitting as a textile production method is capable of producing end products that are shaped-toform and with added thickness. Therefore, savings in post-processing time, cost, material and labor as compared to current methods of preform production are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Huntsman Textile Effects, a global leader in innovative solutions and environmentally sustainable products, is featuring high-performance end-to-end systems for protection effects and sustainable solutions for any wear at Performance Days on April 27-28, 2022, in Munich, Germany.

With more consumers seeking comfort and protection when buying sportwear, they expect their sports apparel to dry quickly, resist stains and odors, and offer breathability. Achieving these functionalities with on-trend aesthetics whilst realizing sustainability, are possible.

Resource saving solutions
Huntsman will introduce the AVITERA® SE Fast process at Performance Days. The revolutionary technology delivers the lowest environmental impact for dyeing polyester-cellulosic (PES-CO) blends. It combines alkali-clearable TERASIL® W/WW disperse dyes and AVITERA® SE reactive dyes to cut processing time from around nine hours to just six, helps mills reduce the water and energy required for production by up to 50% and increases output by up to 25% or more while delivering outstanding wet-fastness to ensure that sportswear will not bleed or stain during home laundering, or while in storage or transit.

EROPON® E3-SAVE is another next-generation water saving innovation. An all-in-one textile auxiliary for PES processing, it allows pre-souring, dyeing and reduction clearing to be combined in a single bath and eliminates the need for anti-foaming products, which shortens processing time and saves water and energy.

Eco-friendly stain and rain resistance
In partnership with Chemours, Huntsman will present the new eco-friendly finishes that repel water and stains, and help garments looking new for longer. Teflon™ EcoElite with Zelan™ R3 technology contains 63% plant-based materials and is the industry’s first renewably sourced water-repellent finish. It exceeds performance levels possible with traditional fluorinated technologies, with excellent water repellency and durability while reserving breathability.

Innovative odor control solutions
Huntsman will also showcase revolutionary antimicrobial and odor-control solutions as part of their partnership with Sciessent. Sciessent’s latest anti-odor technology – NOBO™ specifically developed to reduce odors in natural and synthetic fabrics. It can be incorporated into virtually any fabric – from base layer and activewear tops to socks and underwear to jeans and chinos. It offers a cost-effective way to upgrade everyday garments.

In addition, the partners will also present Sciessent’s Agion Active X2®, a next-generation odor-control solution that combines advanced antimicrobial and odor-absorbing technologies to both capture and fight odor-causing bacteria, and Lava X2®, a standalone odor adsorption product and key component of Agion Active X2® that attracts, absorbs and degrades odors for long-lasing odor protection.

High-performance yarns now offer almost unlimited possibilities for replacing traditional raw materials in a vast range of technical applications. Often tailor-made, these filament yarns go way beyond the conventional idea of ‘textiles’ – finding new uses in sectors such as automotive, aviation, maritime, medical and construction, among many others.

Technical textiles are everywhere in our daily lives today, even if we may not always realize it. Some are in more obviously textile products, from sewing threads to artificial turf. But then, take cars as an example: modern vehicles are stuffed with parts made from sophisticated yarns. It’s common for producers of automotive parts now to send template material and requirement lists to Swiss Textile Machinery members, trusting their expertise and experience. Members operate development and testing centers with latest machine installations, where their experts devise customized solutions, as well as calling on the pure innovative spirit which is part of their DNA.

At the extremes
Technology drives applications beyond our current imagining in the case of Heberlein air splicers. Developed for a wide range of uses with high-strength technical fibers, they have no problems splicing aramid fibers up to 16’100 dtex, carbon up to 30’000 dtex, Dyneema up to 5’500 dtex, and glass up to 4’800 tex. Using compressed air, the splicers produce a tear-resistant, homogeneous splice of material without interfering knots.

Retech has the technology to achieve specifications for filament yarns, drawing and stretching fibers to perfection. Top heated godet rolls – many customized – are developed for high-performance fibers. Temperatures up to 400 °C can be achieved. Combining the right settings and wide speed ranges for each specific process results in unique end-products.

Fabric producers of high-end applications must avoid any quality risk. Yarn producers are well aware of this responsibility, so they use precision package winders for technical yarns, developed by Rieter’s subsidiary SSM. Taking yarns from ring twisting bobbins, its specialist finish winders can produce coarse-count technical yarns up to 50’000 dtex, offering a new level of flexibility and winding quality.

Lifestyle essentials
At first glance, motorists might fail to notice many of the technical yarns ‘hidden’ inside their cars. These products have functions such as providing stability with hardly any weight, or absorbing tensile forces at defined elongation. This kind of controlled elongation behaviour, for example, arises from the choice of textile material and the special construction of the yarns used.

Such specifications make twisting and cabling machines essential for the automotive industry. Saurer offers machines for the production of technical yarns made from a variety of feed materials in a very wide yarn count range. They are needed for vehicle products such as tire carcasses, toothed engine belts, seat belts, airbags and lorry tarpaulins.

Technical yarns also play a surprising role in our mobile devices. Tapping, scrolling and swiping are second nature for billions, with our phones and a plethora of other lifestyle essentials. Yet, how many people would know that the touch-sensitivity we take for granted on these screens is largely made possible by twisted glass fibers. Bräcker, part of Rieter’s components business, offers a selection of vertical sinter metal rings and nylon travelers for glass fiber twisting, so that mills can achieve high levels of productivity and quality.

Future unlimited
Automotive and communication technology are already important industries for Swiss Textile Machinery members, along with well-known technical textiles markets in sectors such as medical, transport and construction. Smart-wear is already noted as a field with significant potential. Naturally, members are constantly investigating other possibilities. Swiss textile machinery is already applied in energy (batteries), and plastics.

The Swiss Textile Machinery Pavilion will be at the Techtextil exhibition in Frankfurt, Germany, taking place from 21 to 24 June 2022.

• Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
• Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
• Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
• Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today from major limitations with mass customization of polyester

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, announced today the Company will present the convergence of design, technology, and sustainable fashion at Kornit Fashion Week Tel Aviv 2022, April 3rd – 6th. Rewriting the rules for fashion and textiles, the transformative event will unveil vibrant runway collections together with game-changing industry-first product and technology introductions that bring digital production to the mainstream.

The four-day event is attended by some of the top designers, retailers, brands, fulfillers, and ecommerce players, in addition to global investors and press – and will include exclusive VIP experiences demonstrating the confluence of the design, technology, and fashion worlds. Together, these three elements are central to Kornit’s 4.0 strategy, bringing sustainable, on-demand fashion to the mainstream with end-to-end workflow solutions.

Kornit Fashion Week Tel Aviv 2022

Kornit Fashion Week features an immersive runway showcase produced by worldwide fashion icon, producer, director, and entrepreneur Motty Reif. The week follows successful Kornit events in 2021 across Los Angeles, New York, Milan, and Tel Aviv – displaying the creative freedom associated with sustainable, on-demand fashion fulfillment. Attendees will experience runway events showcasing designer creativity across a broad array of collections. These fascinating collections were created in just a few weeks, unlike typical fashion and textile production processes that take over six months.

Industry-First Introductions

Looking behind the scenes at Kornit Fashion Week, attendees will witness Kornit’s disruptive mass production technology in action. Unveiled for the first time, the Kornit Apollo direct-to-garment (DTG) system addresses accelerated post-pandemic market trends for streamlined supply chains and production nearshoring. Demonstrated at an exclusive VIP event, Kornit Apollo features the Company’s proven MAX technology offering the highest retail quality combined with full automation control and integrated smart curing processes, utilizing functionality from Lichtenau, Germany-based Tesoma (Kornit’s recently announced acquisition). The solution is the most comprehensive digital, single-step end-to-end system for nearshore short-and-medium-runs mass production and offers optimal TCO and highest output per operator. The result far surpasses performance of screen printing and analog techniques. With early customer engagements in the second half of 2022, the system will be available mid-2023.

Physical and Virtual Worlds

Kornit enables customers to exchange supply chain headaches and materials waste for unsurpassed creativity and a frictionless pixel-to-parcel-to-doorstep production experience. Supported by the KornitX workflow solution, customers have access to a scalable and modular ecosystem for on-demand decorated apparel and textiles. Supporting diverse supply chain models, the infrastructure-agnostic system enables on-demand, automated production, end-to-end from initial order to package delivery.

• March 16-18, 2022, Istanbul Expo Center
• Successful start of Texhibition, Istanbul Fabric and Textile Accessories Fair with over 10,000 visitors from 63 countries
• More than 160 exhibitors presented fabrics, yarns and accessories on approx. 5,000 square meters in the Istanbul Expo Center
• Intensive order activity in a professional trade fair atmosphere of over 1billion US$
• The organizer's objective: to double the area and number of exhibitors for the second event in September

With over 10,000 visitors, the premiere event of Texhibition Istanbul Fabric and Textile Accessories Fair, organized by the Istanbul Textile and Raw Materials Exporters' Association (ITHIB) and the Istanbul Chamber of Commerce (ITO) from March 16th to 18th, 2022 has successfully started.

İTHİB President Ahmet Öksüz: "Our exhibition platforms Texhibition Istanbul Fabric and Textile Accessories Fair and IFCO, Istanbul Fashion Connection, which was launched by our sister association IHKIB in February, play an important role in making Istanbul the fashion center of the Turkish textile and clothing industry. For the follow-up event to Texhibition in September this year, we expect the number of exhibitors and space to double."

The consistently positive feedback from the exhibitors underscores this expectation, as does the great interest shown by international visitors, including those from Denmark, Germany, France, Italy, the Netherlands and the UK.

The Turkish textile industry started with an export target of US$ 15 billion in 2022. The exhibition organizers assume that their platforms will contribute US$ 1 billion. Turkey is one of the most important procurement markets for the European textile industry and is becoming even more important in the course of the global supply chain problem and is now one of the top 3 most interesting procurement locations with its low prices, good quality products, reliable suppliers and short delivery times.

Exhibitors
On offer were high-quality and innovative fabrics from the weaving sector, including Kipaş Textiles, BTD Textile, Özdoku, Bossa and Yünsa; knitters like Gülle, Saka, Örkumod or İskur showed their current collections; yarn market leaders such as Korteks, Tepa and Gama were present, as were Şimşek Ege, EMR Zippers, Çağ-Tek and Öz-El Lastik for the accessories sector. A total of 166 exhibiting companies presented themselves in clearly structured segments in a professional trade fair atmosphere.

Frame program
In the Texhibition Forum, experts discussed the topics Sustainability, New Trends, Supply Chain and GMO-Free Cotton giving an outlook on the upcoming trends and developments in the Turkish textile industry. All events were heavily frequented by visitors.

Next Texhibition September 21-23, 2022

ITM 2022, which will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022, will be the first and largest international textile machinery exhibition to be held after a 3-year break. The leading brands of world textile technologies will launch their latest machines at ITM 2022.
The latest ITM Exhibition hosted the world textile industry with 1200 exhibitors from 64 countries and 60,000 visitors from 94 countries. ITM 2022 Exhibition in cooperation with TEMSAD and in partnership with Tüyap Tüm Fuarcılık Inc. and Teknik Exhibitions Inc. plans to set new records as one of the most important global organizations to be organized after the pandemic outbreak period.

The textile industry, which is among the leading sectors in Turkey's exports, demonstrated its power to the whole world, especially during the pandemic outbreak period. Achieving an increase of up to 40 percent in exports of textiles and raw materials, Turkey also broke records after records in medical textile, technical textile, and indoor textile exports.

Ranking in the top three in the most important market for the European textile machinery manufacturers, Turkey also attracted attention with its production performance during the troublesome pandemic outbreak. Many European machinery manufacturers, who spoke highly of Turkey's performance, announced that their machinery sales to Turkey increased in 2020 and 2021. Turkish textile companies, which increase their production capacity because they were unable to keep up with the demands, continue their new investments and modernizations.

Leading brands of textile technologies such as Picanol, Itema, Toyota, Saurer, Rieter and Trützschler are among the companies that will exhibit their latest innovations at the ITM 2022.

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

Carbon Expertise
Experience with conductive fibers enables ANDRITZ to overcome challenges and provide access to new product developments. The company’s expertise lies in textile know-how as well as a deep understanding of related constraints. It includes carded/crosslapped processes for nonwovens made from recycled carbon fibers, which can be delivered in rolls or die-cut shapes.

Unconventional Needling for End-Uses
ANDRITZ addresses customers’ challenges by offering solutions and expertise in terms of straight and multi-axial needling, enabling the consolidation of fibers on flat or non-flat surfaces (such as rounded shapes) and even of layers up to 350 mm thick. New developments are made possible thanks to the outstanding ANDRITZ testing facility.

Support and Development
The ANDRITZ needlepunch technical center in Elbeuf, France, is open to visitors. Innovative strength and adaptability are the characteristics that make ANDRITZ the preferred partner in the search for genuine, efficient, and reliable solutions in the interests of productivity and premium, state-of-the-art consolidation. Secrecy being key in such sensitive development work, ANDRITZ naturally always guarantees the utmost confidentiality.