From the Sector

Reset
86 results
(c) BTMA by AWOL Media
08.09.2022

Shelton Vision presents new fabric inspection technique

A new fabric inspection technique for accurately detecting the most subtle of defects on patterned fabrics during high speed production has been developed by BTMA member Shelton Vision, of Leicester, UK.

The patent-pending system has been integrated into the company’s WebSpector platform and validated through factory trials on a purpose-built full scale in-house demonstration system with sophisticated fabric transport capabilities. As a result, a first system has already been ordered by a manufacturer of both plain and patterned fabrics, including camouflage, in Colombia. This follows the successful conclusion of a 21-month Innovate UK project in which techniques for the resolution of complex pattern deformations were developed by machine vision and computer scientists in the company, backed up by the machine vision and robotics department at Loughborough University.

A new fabric inspection technique for accurately detecting the most subtle of defects on patterned fabrics during high speed production has been developed by BTMA member Shelton Vision, of Leicester, UK.

The patent-pending system has been integrated into the company’s WebSpector platform and validated through factory trials on a purpose-built full scale in-house demonstration system with sophisticated fabric transport capabilities. As a result, a first system has already been ordered by a manufacturer of both plain and patterned fabrics, including camouflage, in Colombia. This follows the successful conclusion of a 21-month Innovate UK project in which techniques for the resolution of complex pattern deformations were developed by machine vision and computer scientists in the company, backed up by the machine vision and robotics department at Loughborough University.

Restrictions
Traditional methods for defect detection rely on human inspection which is ineffective, with detection rates under 65%, while the Shelton WebSpector machine vision system offers a sophisticated platform for automated defect detection of over 97%, but until now has been restricted to plain textiles.

While pattern matching and neural network approaches have previously been tried for patterned textiles, they have failed to provide a practical solution due to the extreme complexity associated with pattern matching on deformable substrates like textiles, as well as the time required to train a neural network for each pattern type.

Challenges
The challenge is that fabrics are not rigid and can be creased or stretched and are also subject to local distortion,” says Shelton Vision Managing Director and CEO Mark Shelton. “As a result, inspection without the technique we have developed, would lead to thousands of false positives. Our sophisticated pattern inspection software techniques ensure a clean image, allowing the detection of faults on fabrics running at speeds of up to a hundred metres a minute.”

The full system consists of:

  • A camera and lighting system for optimum image capture at high speed and associated image processing hardware.
  • Self-training software utilising statistical analysis to automate the system configuration for new textile products.
  • An advanced suite of defect detection algorithms for the detection of all textile defect types.
  • An AI-driven defect classification system which learns and automates defect naming in real time, as well as a real time defect grading capability based on client decision rules.
  • A system for recording and retrieving complete roll map images for subsequent review and quality control.

The generation of textile roll maps with complete defect data allows for an optimised textile cut plan, improved downstream processing and quality assurance.

Source:

BTMA by AWOL Media

04.08.2022

adidas with strong growth in Western markets in Q2

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected.

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected. And we have to take into account a potential slowdown in consumer spending in all other markets for the remainder of the year.”

Currency-neutral revenues increase 4% despite macroeconomic constraints
In the second quarter, currency-neutral revenues increased 4% as adidas continued to see strong momentum in Western markets. This growth was achieved despite continued challenges on both supply and demand. Supply chain constraints as a result of last year’s lockdowns in Vietnam reduced top-line growth by around € 200 million in Q2 2022. In addition, the company’s decision to suspend its operations in Russia reduced revenues by more than € 100 million during the quarter. Continued covid-19-related lockdowns in Greater China also weighed on the top-line development in Q2. From a channel perspective, the top-line increase was to a similar extent driven by the company’s own direct-to-consumer (DTC) activities as well as increases in wholesale. Within DTC, e-commerce, which now represents more than 20% of the company’s total business, showed double-digit growth reflecting strong product sell-through. From a category perspective, revenue development was strongest in the company’s strategic growth categories Football, Running and Outdoor, which all grew at strong double-digit rates. In euro terms, revenues grew 10% to € 5.596 billion in the second quarter (2021: € 5.077 billion).

Strong demand in Western markets
Revenue growth in the second quarter was driven by Western markets despite last year’s lockdowns in Vietnam still reducing sales, particularly in EMEA and North America, by
€ 200 million in total. In addition, the top-line development in EMEA was also impacted by the loss of revenue in Russia/CIS of more than € 100 million. Nevertheless, currency-neutral sales grew 7% in the region. Revenues in North America increased 21% during the quarter driven by growth of more than 20% in both DTC and wholesale. Revenues in Latin America increased 37%, while Asia-Pacific returned to growth. Currency-neutral revenues increased 3% in this market despite still being impacted by limited tourism activity in the region. In contrast, the company continued to face a challenging market environment in Greater China, mainly related to the continued broad-based covid-19-related restrictions. As a result, currency-neutral revenues in the market declined 35% during the three-months period, in line with previous expectations. Excluding Greater China, currency-neutral revenues in the company’s other markets combined grew 14% in Q2.

Operating profit of € 392 million reflects operating margin of 7.0%
The company’s gross margin declined 1.5 percentage points to 50.3% (2021: 51.8%). Significantly higher supply chain costs and a less favorable market mix due to the significant sales decline in Greater China weighed on the gross margin development. This could only be partly offset by a higher share of full price sales, first price increases and the benefits from currency fluctuations. Other operating expenses were up 19% to € 2.501 billion (2021: € 2.107 billion). As a percentage of sales, other operating expenses increased 3.2 percentage points to 44.7% (2021: 41.5%). Marketing and point-of-sale expenses grew 8% to € 663 million (2021: € 616 million). The company continued to prioritize investments into the launch of new products such as adidas’ new Sportswear collection, the next iteration of its successful Supernova running franchise and first drops related to the Gucci collaboration as well as campaigns around major events like ‘Run for the Oceans.’ As a percentage of sales, marketing and point-of-sale expenses were down 0.3 percentage points to 11.8% (2021: 12.1%). Operating overhead expenses increased by 23% to a level of € 1.838 billion (2021:
€ 1.492 billion). This increase was driven by adidas’ continuous investments into DTC, its digital capabilities and the company’s logistics infrastructure as well as by unfavorable currency fluctuations. As a percentage of sales, operating overhead expenses increased 3.5 percentage points to 32.8% (2021: 29.4%). The company’s operating profit reached a level of € 392 million (2021: € 543 million), resulting in an operating margin of 7.0% (2021: 10.7%).

Net income from continuing operations reaches € 360 million
The company’s net income from continuing operations slightly declined to € 360 million (2021: € 387 million). This result was supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision. Consequently, basic EPS from continuing operations reached € 1.88 (2021: € 1.93) during the quarter.

Currency-neutral revenues on prior year level in the first half of 2022
In the first half of 2022, currency-neutral revenues were flat versus the prior year period. In euro terms, revenues grew 5% to € 10.897 billion in the first six months of 2022 (2021:
€ 10.345 billion). The company’s gross margin declined 1.7 percentage points to 50.1% (2021: 51.8%) during the first half of the year. While price increases as well as positive exchange rate effects benefited the gross margin, these developments were more than offset by the less favorable market mix and significantly higher supply chain costs. Other operating expenses increased to € 4.759 billion (2021: € 4.154 billion) in the first half of the year and were up 3.5 percentage points to 43.7% (2021: 40.2%) as a percentage of sales. adidas generated an operating profit of € 828 million (2021: € 1.248 billion) during the first six months of the year, resulting in an operating margin of 7.6% (2021: 12.1%). Net income from continuing operations reached € 671 million, reflecting a decline of € 219 million compared to the prior year level (2021: € 890 million). Accordingly, basic earnings per share from continuing operations declined to € 3.47 (2021: € 4.52).

Average operating working capital as a percentage of sales slightly decreases
Inventories increased 35% to € 5.483 billion (2021: € 4.054 billion) at June 30, 2022 in anticipation of strong revenue growth during the second half of the year. Longer lead times as well as the challenging market environment in Greater China also contributed to the increase. On a currency-neutral basis, inventories were up 28%. Operating working capital increased 23% to € 5.191 billion (2021: € 4.213 billion). On a currency-neutral basis, operating working capital was up 14%. Average operating working capital as a percentage of sales decreased 0.4 percentage points to 21.0% (2021: 21.4%), reflecting an overproportional increase in accounts payable due to higher sourcing volumes and product costs.

Adjusted net borrowings at € 5.301 billion
Adjusted net borrowings amounted to € 5.301 billion at June 30, 2022, representing a year-over-year increase of € 2.155 billion (June 30, 2021: € 3.146 billion). This development was mainly due to the significant decrease in cash and cash equivalents.

FY 2022 outlook reflects double-digit growth during the second half of the year
On July 26, adidas adjusted its guidance for FY 2022 due to the slower-than-expected recovery in Greater China since the start of the third quarter resulting from continued widespread covid-19-related restrictions. adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% to 13% range), reflecting a double-digit decline in Greater China (previously: significant decline). While so far the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any market other than Greater China, the adjusted guidance also accounts for a potential slowdown of consumer spending in those markets during the second half of the year as a result of the more challenging macroeconomic conditions. Therefore, growth in EMEA is now expected to be in the low teens (previously: mid-teens growth), while revenues in Asia-Pacific are projected to grow at a high-single-digit rate (previously: mid-teens growth). Despite the more conservative view on the development of consumer spending in the second half of the year, adidas has increased its forecasts for North America and Latin America reflecting the strong momentum the brand is enjoying in these markets. In North America, currency-neutral revenues are now expected to increase in the high teens. Sales in Latin America are projected to grow between 30% and 40% (both previously: mid- to high-teens growth).   

Due to the less favorable market mix and the impacts from initiatives to clear excess inventories in Greater China until the end of the year, gross margin is now expected to reach a level of around 49.0% (previously: around 50.7%) in 2022. Consequently, the company’s operating margin is now forecast to be around 7.0% (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion to € 1.9 billion range).

More information:
adidas financial year 2022
Source:

adidas

28.07.2022

Lectra: Financial statements for the first half of 2022

  • Revenues: 250.8 million euros (+71%)
  • EBITDA before non-recurring items: 45.2 million euros (+95%)
  • Net income: 20.2 million euros (multiplied by 2.3)
  • Free cash flow before non-recurring items: 14.7 million euros

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the first half of 2022, which have been subject to a limited review by the Statutory Auditors.

To facilitate analysis of the Group’s results, the financial statements are compared to those published in 2021 and to the 2021 pro forma financial statement ("2021 Pro forma"), prepared by integrating the three acquisitions made in 2021 – Gerber Technology (“Gerber”), Neteven, and Gemini CAD Systems (“Gemini”) – as if they had been consolidated from January 1, 2021, whereas they have been consolidated since June 1, July 28 and September 27, 2021 respectively.

See attached document for full report.

  • Revenues: 250.8 million euros (+71%)
  • EBITDA before non-recurring items: 45.2 million euros (+95%)
  • Net income: 20.2 million euros (multiplied by 2.3)
  • Free cash flow before non-recurring items: 14.7 million euros

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the first half of 2022, which have been subject to a limited review by the Statutory Auditors.

To facilitate analysis of the Group’s results, the financial statements are compared to those published in 2021 and to the 2021 pro forma financial statement ("2021 Pro forma"), prepared by integrating the three acquisitions made in 2021 – Gerber Technology (“Gerber”), Neteven, and Gemini CAD Systems (“Gemini”) – as if they had been consolidated from January 1, 2021, whereas they have been consolidated since June 1, July 28 and September 27, 2021 respectively.

See attached document for full report.

27.07.2022

Autoneum: Half Year Results 2022

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Current geopolitical developments substantially affected business performance in the first half of 2022. They are accompanied by accelerating inflation and significant price increases in the commodities markets, which the war in Ukraine has further exacerbated. These developments are also delaying market recovery in the automotive industry. Autoneum does everything it can to minimize the impact on the Group. Despite the present challenges, we will continue to implement our strategy, focusing on innovative and sustainable technologies for growing markets of the future.

  • Revenue development influenced by the war in Ukraine and supply chain bottlenecks*
  • Low production volumes and high inflation impact profitability*
  • Solid free cash flow enables further reduction in net debt*
  • Business Groups*
  • Well positioned for e-mobility and sustainability*
  • Expanding the product portfolio for electric vehicles*
  • Autoneum joins the Science Based Targets initiative*

Outlook
According to global market forecasts1, automobile production will pick up again in the second half of the year with growth of 8.8% compared with the first half-year 2022. For full-year 2022, global automobile production is projected to reach 80.8 million vehicles, which is equivalent to a 4.7% increase on 2021. Based on the market forecasts, Autoneum expects to improve the operating result for the second half of the year. This will be supported by ongoing customer negotiations with a view to fair sharing of costs, the accompanying contribution of vehicle manufacturers to shouldering the sharp increases in material, energy and transport costs and the foreseeable normalization of production after the easing of lockdown measures in China. On this basis, Autoneum expects substantially enhanced results for full-year 2022, as well as an improvement in the EBIT margin to 2.0% to 3.0%. Free cash flow is expected to be in the mid to high double-digit million range for the full year 2022.

*For more information see attached document

1Source: IHS “Light Vehicle Production Forecasts” – July 15, 2022

More information:
Autoneum supply chain acoustic
Source:

Autoneum Management AG

28.06.2022

Printing Expo Online doubles the size of Zone 2 with new exhibitors

  • Printing Expo Online is expanding again by doubling the size of Zone 2 with new exhibitors and feature zones making it one of the largest virtual trade shows in the world.

Visitors will be able to visit the new Zaikio underground catacombs that are accessible from several portals around the show. Click on a New York taxi, a London Phone Box or a funky Hot Dog Van and you will be transported into the Zaikio cavern environment where visitors will be able to watch application videos, arrange demos and sign up to this amazing new cloud-based platform.

Another addition to Zone 2 is the new Software Technology Centre (STC). This feature area will grow over time to show a wide range of software solutions that are available on the market.

Joining Printing Expo Online in the STC for the launch is EFI Fiery, who are showing their full portfolio of software solutions.

Design’N’Buy are also a new exhibitor in the STC with their all-In-One Web2Print software solution that helps users leverage technology, people and processes for the multi-fold growth of your printing business.

  • Printing Expo Online is expanding again by doubling the size of Zone 2 with new exhibitors and feature zones making it one of the largest virtual trade shows in the world.

Visitors will be able to visit the new Zaikio underground catacombs that are accessible from several portals around the show. Click on a New York taxi, a London Phone Box or a funky Hot Dog Van and you will be transported into the Zaikio cavern environment where visitors will be able to watch application videos, arrange demos and sign up to this amazing new cloud-based platform.

Another addition to Zone 2 is the new Software Technology Centre (STC). This feature area will grow over time to show a wide range of software solutions that are available on the market.

Joining Printing Expo Online in the STC for the launch is EFI Fiery, who are showing their full portfolio of software solutions.

Design’N’Buy are also a new exhibitor in the STC with their all-In-One Web2Print software solution that helps users leverage technology, people and processes for the multi-fold growth of your printing business.

Also moving into the STC will be PrintIQ who offer the modern print shop a solution for businesses that need to be able to grow and scale as needed without slowing down or sacrificing quality.

Another new addition to the show is the introduction of the Global Print Trade Club. This initiate is free to all Print Service providers around the world and offers the opportunity to network on a global scale.

New to the exhibition is Kornit Digital with their multi storey showroom which will shortly be opening its doors where visitors will be able to view Direct to Garment and Direct to Fabric printing equipment, technical data, case studies, clothing designs and applications as well as visit the Kornit dedicated auditorium where live streaming content will be shown of Kornit Digital’s Fashion weeks as they happen throughout the year.

Another addition is the new application journey added to the Xeikon Innovation Centre at Printing Expo Online. Visitors will now be able to experience a virtual tour of a living room, kitchen, bathroom, and garage where Xeikon will show applications for commercial, label and Wall Deco products that can be produced on their digital print engines.

Printing Expo Online is open 24/7 365 days a year and has now welcomed over 60,000 visitors from all over the world and continues to grow not only its footprint and total visitor numbers, but also its relevance as an important resource tool for Print Service Providers from around the world that, for whatever reason, are unable to attend live events.

Source:

Printing Expo Online / Bespoke

17.06.2022

"Lifting Tariffs Would Cement China’s Dominance of Global Manufacturing"

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

The submission was filed by the National Council of Textile Organizations (NCTO) and the Narrow Fabrics Institute (NFI) and Industrial Fabrics Institute (USIFI) – both divisions of the Advanced Textiles Association (ATA).  The associations represent the entirety of the U.S. textile production chain.

“For decades, China’s illegal actions have undermined virtually every domestic manufacturing sector and contributed to the direct loss of millions of U.S. jobs. These devastating state-sponsored practices include intellectual property theft as well as pervasive state-ownership of manufacturing, industrial subsidies, and abhorrent labor and human rights abuses in the Xinjiang region,” they noted. “Cancelling these tariffs would create further unhealthy dependence on Chinese supply chains and embolden future systematic trade abuses as bad actors know that the U.S. will not hold them accountable.”

The tariffs were imposed on China beginning in 2018 in response to China’s continuing IP and related trade violations. China has since failed to comply with an agreement it reached with the United States in 2020.

More information:
NCTO Tariffs China
Source:

NCTO

31.05.2022

TOS+H EXPO 2022 concludes 4th edition of trade fair in Turkey

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

111 companies from nine different countries took part in the 4th edition of one of the leading trade fairs in Turkey for occupational safety and health, TOS+H EXPO, from May 14-17, in Istanbul. Due to the ever-increasing importance of personal protection, occupational safety and a healthy workplace, TOS+H EXPO came just in time. Exhibitors were able to target a Turkish audience with the latest trends and products in industrial safety, health promotion at work and occupational safety management. The Occupational Health and Safety Symposium, which was organised by the Istanbul Chamber of Industry (ICI) was also very well attended on all four days. Current occupational safety and health issues were addressed and provided important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. A total of 4.309 visitors from 58 countries attended the 4th TOS+H EXPO.

“The remarkable outcome of TOS+H EXPO 2022 is clearly asserting its significance as the leading trade fair for the industry, in Turkey,” says Petra Cullmann, Executive Director at Messe Düsseldorf. “Our new partner, the Istanbul Chamber of Industries, paved the way for a high-caliber symposium with inspiring insights and intensive discussions, and our exhibitors again proved their expertise with a comprehensive overview of innovative products, equipment and services at the trade fair. We are proud to be sending clear signals in the market. We're giving a lead, both in Turkey and beyond, on the element that matters most: the individual.”

TOS+H Expo 2022 and the Occupational Health and Safety Symposium organized by the Istanbul Chamber of Industry were officially opened on May 14, 2022 by Ms. Petra Cullman, Executive Director Messe Düsseldorf and Sadık Ayhan SARUHAN, ICI Vice President. The new partnership with the Chamber of Industry will ensure the quality of the event and also strengthen the leading position of TOS+H Expo in Turkey.

“The Occupational Health and Safety Symposium, which we organized simultaneously with the 4th TOS+H Expo - Turkish Occupational Safety + Health Exhibition, was concluded with the presentations of 84 speakers in 22 sessions. Our symposium included highly interesting presentations on the environment, sustainability and labor law and was met with great interest by all parties and especially by representatives from all industrial sectors which deal with the topic of occupational safety and health at work. As ICI, we will continue to work to improve OHS processes in the next period”, said a spokesperson for the Istanbul Chamber of Industry.

Source:

Messe Düsseldorf GmbH

11.05.2022

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman David Poston, who was elected for the 2022-2023 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 18th Annual Meeting on May 11.
 
Poston’s speech outlined (1) the U.S. textile industry’s resilience and significant rebound in 2021 (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s  policy achievements and priorities for domestic textile manufacturers.
 
You can find his remarks here and a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry here.
 
Poston is president of Palmetto Synthetics, a specialty synthetic fiber producer based in Kingstree, South Carolina.
 
NCTO’s annual meeting was held May 10-11 in Washington, D.C.

National Council of Textile Organizations (NCTO) Chairman David Poston, who was elected for the 2022-2023 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 18th Annual Meeting on May 11.
 
Poston’s speech outlined (1) the U.S. textile industry’s resilience and significant rebound in 2021 (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s  policy achievements and priorities for domestic textile manufacturers.
 
You can find his remarks here and a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry here.
 
Poston is president of Palmetto Synthetics, a specialty synthetic fiber producer based in Kingstree, South Carolina.
 
NCTO’s annual meeting was held May 10-11 in Washington, D.C.

(c) PCMC, Barry-Wehmiller
05.05.2022

PCMC opens Packaging Innovation Center for printing and packaging industries

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, welcomed 70-plus customers, suppliers and area supporters to its new Packaging Innovation Center on April 26 for a ribbon-cutting ceremony, tour and overview presentation.

Located at PCMC’s headquarters in Green Bay, the facility — focused on the printing and packaging industries — will serve as a resource for training, demonstrations and industry trials, along with research and development opportunities. The new center features the latest equipment for plate mounting, anilox roll laser cleaning, and central impression and inline flexographic printing.

PCMC’s current partners at the center include 3M, All Printing Resources Inc., AV Flexologic, Clean Planet, Fox Valley Flexo Services, Harper Corporation of America, Interflex Laser Engravers, INX International Ink Co., Miraclon, Rossini s.p.a., Sandon Global, tesa SE, Wikoff Color Corporation and XSYS, in addition to Hudson-Sharp, which is part of PCMC. In the future, PCMC will seek to expand the center’s capabilities by collaborating with additional innovative companies serving the flexographic printing industry.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, welcomed 70-plus customers, suppliers and area supporters to its new Packaging Innovation Center on April 26 for a ribbon-cutting ceremony, tour and overview presentation.

Located at PCMC’s headquarters in Green Bay, the facility — focused on the printing and packaging industries — will serve as a resource for training, demonstrations and industry trials, along with research and development opportunities. The new center features the latest equipment for plate mounting, anilox roll laser cleaning, and central impression and inline flexographic printing.

PCMC’s current partners at the center include 3M, All Printing Resources Inc., AV Flexologic, Clean Planet, Fox Valley Flexo Services, Harper Corporation of America, Interflex Laser Engravers, INX International Ink Co., Miraclon, Rossini s.p.a., Sandon Global, tesa SE, Wikoff Color Corporation and XSYS, in addition to Hudson-Sharp, which is part of PCMC. In the future, PCMC will seek to expand the center’s capabilities by collaborating with additional innovative companies serving the flexographic printing industry.

Source:

PCMC, Barry-Wehmiller

28.04.2022

Policy Hub: Media Masterclass on Transparency in the Apparel & Footwear Industry

Policymakers and industry stakeholders recently convened for an enlightening conversation on the challenges that the apparel and footwear industry is facing regarding the communication of reliable information to consumers and the drastic change that is needed through smart regulation. Hosted by the Policy Hub, Circularity for Apparel and Footwear, and Global Fashion Agenda, the non-profit that fosters industry collaboration on sustainability to drive impact, the masterclass presented media with views on the steps that must be taken to prevent greenwashing and empower consumers.

The Policy Hub - Circularity for Apparel and Footwear – represents more than 700 brands, retailers, manufacturers, and other stakeholders from across the globe, covering more than 50 per cent of the apparel and footwear sector. During the masterclass, Baptiste Carrière-Pradal, Chair, Policy Hub, presented its position on the EU Consumer Empowerment Initiative and the importance of Substantiating Green Claims through the new standardised methodology of the Product Environmental Footprint (PEF).

Policymakers and industry stakeholders recently convened for an enlightening conversation on the challenges that the apparel and footwear industry is facing regarding the communication of reliable information to consumers and the drastic change that is needed through smart regulation. Hosted by the Policy Hub, Circularity for Apparel and Footwear, and Global Fashion Agenda, the non-profit that fosters industry collaboration on sustainability to drive impact, the masterclass presented media with views on the steps that must be taken to prevent greenwashing and empower consumers.

The Policy Hub - Circularity for Apparel and Footwear – represents more than 700 brands, retailers, manufacturers, and other stakeholders from across the globe, covering more than 50 per cent of the apparel and footwear sector. During the masterclass, Baptiste Carrière-Pradal, Chair, Policy Hub, presented its position on the EU Consumer Empowerment Initiative and the importance of Substantiating Green Claims through the new standardised methodology of the Product Environmental Footprint (PEF).

A first panel was kicked off by the European Commission representative who provided attendees with an overview of what is new about the PEFCRs for apparel and footwear. That led to an interesting and informed discussion with brands and other organisations which showed both the benefits of the PEF and the improvements needed in its methodology for it to fully reflect the complexity of the industry.

Overall, discussions showed the need for the topic to be addressed globally, apply a clear solid method to measure the environmental impact and for much more stringent legislation to regulate and ban greenwashing. As put by Baptiste Carriere-Pradal, Chair of the Policy Hub: “There will be challenges, the journey is long but now is the time for clear and ambitious regulation that will help us change the industry.”

You can watch the Media Masterclass here.

Source:

Global Fashion Agenda

(c) ChemSec, report Not Quite 100%
28.04.2022

ChemSec' Study: Consumer brands demand clarity on recycled plastics

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

  • Honest communication towards customers
  • Comprehensive information from suppliers
  • Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

  • Honest communication towards customers
  • Comprehensive information from suppliers
  • Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

Is non-mechanical recycling the answer?
Only about ten percent of all discarded plastics is recycled today, which is of course not nearly enough to achieve a circular plastics economy. Despite ambitions and initiatives to reduce plastics use – replacing the materials with other, more sustainable ones – the “plastic tap” is not expected to be turned off anytime soon. Quite the opposite, which makes raising the recycling rates more important than ever.

Although commercially viable, traditional (mechanical) recycling is afflicted with severe flaws, such as legacy chemicals, quality and functionality issues, as well as the lack of clean and sorted waste streams. The brands cited quality and functionality issues as the main obstacles for using more recycled material in their products.

This opens up for non-mechanical recycling, sometimes referred to as chemical recycling, where the plastic is either dissolved or broken down into smaller building blocks. Harmful additives and other hazardous chemicals can be removed in the process, and a material comparable to virgin plastic can be achieved – at least in theory.

So far, however, non-mechanical recycling technologies are costly, energy-intensive, and often require the addition of a great deal of virgin plastic to work – the very material that needs to be phased out.

The chain of custody models needs to be detangled
Apart from these production issues, there is a wide range of chain of custody models surrounding non-mechanical recycling, including mass balance and book & claim, which enable trade of credits or certificates for recycled material.

This cuts the physical connection between input and output, making it possible for a supplier to sell a material as “100% recycled”, when the actual recycled content could be zero.

This is a major issue for the brands ChemSec has spoken to, who value honest and correct communication towards customers. It turns out, perhaps somewhat surprisingly, that being able to slap a “made from 100% recycled plastic” label on a product is not all that important to brands.

To the brands, a physical connection between input (the discarded plastic waste headed for recycling) and output (the product at least partially made from recycled plastics) is far more important.

A physical connection, along with correct and adequate information from suppliers, as well as clearer standards and guidelines than what is available today, is what brands require to increase the use of recycled material and move us closer to a circular economy for plastics.

More information:
ChemSec plastics Recycling
Source:

ChemSec

(c) Officina39
22.04.2022

Officina39 and Adriana Galijasevic’s Cocircular Lab present “Circular Explorations: Recipe for Change”

This collaborative and educational project showcases the use of waste as a resource and prolonging the life of the garment through color. It came to life thanks to key brands who donated items that were then transformed by Officina39’s Recycrom™ applications into a renewed head-to-toe look that was then displayed as an art installation.

What’s the Recipe for change? For Officina39 and Adriana Galijasevic’s Cocircular Lab, this question gives shape to the collaborative and educational project Circular Explorations, specially presented at Amsterdam Denim Days Festival on April 22-23.

Sharing ground values and a common view on the fashion of tomorrow, Officina39, Italian based Chemistry plus Creativity company for the textile sector, joined hands with Adriana Galijasevic’s Cocircular Lab and influential brands to celebrate the importance of an ongoing commitment towards circularity.

This collaborative and educational project showcases the use of waste as a resource and prolonging the life of the garment through color. It came to life thanks to key brands who donated items that were then transformed by Officina39’s Recycrom™ applications into a renewed head-to-toe look that was then displayed as an art installation.

What’s the Recipe for change? For Officina39 and Adriana Galijasevic’s Cocircular Lab, this question gives shape to the collaborative and educational project Circular Explorations, specially presented at Amsterdam Denim Days Festival on April 22-23.

Sharing ground values and a common view on the fashion of tomorrow, Officina39, Italian based Chemistry plus Creativity company for the textile sector, joined hands with Adriana Galijasevic’s Cocircular Lab and influential brands to celebrate the importance of an ongoing commitment towards circularity.

Several donated items – overstock, second-grade production or damaged, unsold pieces – were updated with newly developed applications made with Officina39’s Recycrom™, the one-of-a-kind, patented dyestuffs range made from textile waste. This Circular Explorations capsule is displayed at Denim Days Festival as an art installation, not only to dress people but also to get them acquainted with circularity because they are an important player in closing the loop.

The Recipe for change that emerges from this color research is based on important values and keywords:

  • Consciousness – awareness of oneself and one's surroundings
  • Courage – the mental or moral strength to venture, persevere, and withstand danger, fear, or difficulty.
  • Creativity – the power to imagine and produce new possibilities.
  • Connection – a relationship in which a person or thing is linked or associated with something else, the act or state of connecting.
  • Collaboration – the act of working together for a common goal.

Combined together, they produce CHANGE, which is a driving force for a better tomorrow.

This collaborative and innovative project that addresses circularity is also in direct support of United Nations Sustainable Development Goals, in particular number 12-Responsible Consumption and Production, number 9-Industry innovation & Infrastructure and number 17-Partnership for the Goals.

Source:

Officina39 / Menabò

Photo: Erema
07.04.2022

EREMA: New R&D centre for innovative recycling technologies

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

However, there is not just one recycling solution for all types of plastic waste, but rather different solutions depending on the type of plastic, the product and the application intended for the recycled plastic. While some plastics processing loops, such as for PET bottles, have already been closed, many other plastic waste streams still require a great deal of R&D in cooperation with everyone involved in the value chain to produce recycled pellets that meet the very highest standards for the production of new products. More space will be available for this in the new centre.

R&D is decentralised at EREMA. In recent years, approximately 5 percent of turnover was reinvested annually in research and development. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology, and special technologies with a view to further improving the quality of recycled pellets. They also focus on new recycling technologies for waste plastic materials for which there is currently no satisfactory circular economy solution. The decisive factor here is also to exploit the potential of digitalisation. By collecting and analysing machine data, not only can recycling processes and product quality be further improved, but we can also develop our digital service offering for our customers. Such offerings include customer-specific information tools that feature plant and process data, predictive maintenance and online support as well as commissioning via remote access.

For material tests, which are necessary for research and development work, an expanded machine park will be available following completion of the new R&D centre. Here, the recycling process can be evaluated end-to-end, including upstream and downstream processes such as shredding and further processing of the recycled pellets. The material tests are supported by detailed analysis in the professionally equipped laboratory, which will be relocated to the new premises and upgraded where necessary with the very latest lab equipment.

More information:
EREMA plastics recycling
Source:

EREMA Engineering Recycling Maschinen und Anlagen GmbH

(c) C.L.A.S.S.
31.03.2022

C.L.A.S.S.: Winner of the IMAGINING SUSTAINABLE FASHION competition announced

The winner of the IMAGINING SUSTAINABLE FASHION competition was announced during a webinar broadcast on March 30 at 4pm attended by Giusy Bettoni, CEO of C.L.A.S.S. Eco Hub, Anna Detheridge, President of Connecting Cultures, Dio Kurazawa, Founding Partner of The Bear Scouts, Stefania Ricci, Director of the Salvatore Ferragamo Museum.
 
Vishal Tolambia, 24, a graduate with an MA in Fashion Futures from the London College of Fashion and in Fashion Design from the National Institute of Fashion Technology India, is a Fashion Sustainability researcher and a multidisciplinary designer. In 2021, Vishal founded the organization Humanity-Centred Designs (HCD) with the aim of transforming "human-centred design into humanity-centred designs through sustainable practices to foster the Fashion Industry."
 

The winner of the IMAGINING SUSTAINABLE FASHION competition was announced during a webinar broadcast on March 30 at 4pm attended by Giusy Bettoni, CEO of C.L.A.S.S. Eco Hub, Anna Detheridge, President of Connecting Cultures, Dio Kurazawa, Founding Partner of The Bear Scouts, Stefania Ricci, Director of the Salvatore Ferragamo Museum.
 
Vishal Tolambia, 24, a graduate with an MA in Fashion Futures from the London College of Fashion and in Fashion Design from the National Institute of Fashion Technology India, is a Fashion Sustainability researcher and a multidisciplinary designer. In 2021, Vishal founded the organization Humanity-Centred Designs (HCD) with the aim of transforming "human-centred design into humanity-centred designs through sustainable practices to foster the Fashion Industry."
 
In his communication project, the "Fashion Affair" video proposes a speculative view of fashion dating - derived from dating apps - a tool to effectively evaluate brands and their products, in the form of augmented reality. The consumer is not only informed in real time about the brand and supply chain, but the app also becomes a platform for matching products based on individual sustainability goals and commitments. "Fashion Affair" also won the special social media contest open to the public among the finalists selected by the jury for being the most voted project by Instagram followers on C.L.A.S.S.' profile.
 
Vishal ranked first among the finalists selected by the international jury composed of:
- Anna Detheridge, Founder and President, Connecting Cultures
- Giusy Bettoni, CEO and Founder, C.L.A.S.S.
- Rita Airaghi, Director, Gianfranco Ferré Research Center            
- Paola Arosio, Head of New Brands & Sustainability Projects, Camera Nazionale della Moda Italiana (The National Chamber for Italian Fashion)
- Jeanine Ballone, Managing Director, Fashion 4 Development
- Evie Evangelou, Founder and President, Fashion 4 Development
- Chiara Luisi, Sustainability Projects Coordinator, Camera Nazionale della Moda Italiana (The National Chamber for Italian Fashion)
- Sara Kozlowski, Director of Education and Sustainable Strategies, Council of Fashion Designers of America
- Dio Kurazawa, Founding Partner, The Bear Scouts
- Renata Molho, journalist and fashion writer, former editor-in-chief of L'Uomo Vogue and editor-at-large of L'Uomo Vogue, Vogue Italia, Casa Vogue
- Stefania Ricci, Director, Salvatore Ferragamo Museum.

(c) MUNICHFABRICSTART Exhibitions GmbH
31.03.2022

VIEW Premium Selection celebrates a comeback

On 21 - 22 June 2022, the VIEW Premium Selection Autumn.Winter 23/24 welcomes the textile and fashion industry in Munich's MVG Museum.

The VIEW Premium Selection as a preview textile trade show stands for the latest developments, first colour and material trends and the presentation of a selected, high-quality product portfolio in a personal and professional atmosphere.

At the earliest possible date in the season, around 250 brand new collections for Autumn.Winter 23/24 will be presented at VIEW in the areas of FABRICS, ADDITIONALS, DESIGN STUDIOS as well as DENIM and SPORTSWEAR. The internationality of this year's exhibitors deserves mention since in addition to Germany, Italy and Turkey, they also come from France, England, Greece, Spain, Denmark, Hong Kong, China and Japan.

Bellandi, Dynamo, E. Miroglio, Lisa Spa, Manteco, Max Müller, Agentur Püttmann, Set and Tejidos Royo will be on site, along with numerous other manufacturers. The futuristic suppliers We Nordic, Knopf und Knopf, Le Studio Copenhagen, Thermore and Kipas are exhibiting at VIEW for the first time, making the show the basis of information and inspiration for the upcoming season.

On 21 - 22 June 2022, the VIEW Premium Selection Autumn.Winter 23/24 welcomes the textile and fashion industry in Munich's MVG Museum.

The VIEW Premium Selection as a preview textile trade show stands for the latest developments, first colour and material trends and the presentation of a selected, high-quality product portfolio in a personal and professional atmosphere.

At the earliest possible date in the season, around 250 brand new collections for Autumn.Winter 23/24 will be presented at VIEW in the areas of FABRICS, ADDITIONALS, DESIGN STUDIOS as well as DENIM and SPORTSWEAR. The internationality of this year's exhibitors deserves mention since in addition to Germany, Italy and Turkey, they also come from France, England, Greece, Spain, Denmark, Hong Kong, China and Japan.

Bellandi, Dynamo, E. Miroglio, Lisa Spa, Manteco, Max Müller, Agentur Püttmann, Set and Tejidos Royo will be on site, along with numerous other manufacturers. The futuristic suppliers We Nordic, Knopf und Knopf, Le Studio Copenhagen, Thermore and Kipas are exhibiting at VIEW for the first time, making the show the basis of information and inspiration for the upcoming season.

The textile and fashion industry is also invited to the next MUNICH FABRIC START Autumn.Winter 23/24 from 30 August - 01 September 22 at the MOC Munich and to the BLUEZONE from 30 - 31 August 22 on the Zenith Areal. Valuable information, physical exchange and a spirit of innovation as well as a new SOURCING show-in-show concept await the global industry players in Munich.

Source:

MUNICHFABRICSTART Exhibitions GmbH

(c) Sappi Europe
29.03.2022

Sappi expands its Range of sustainable Packaging Papers

With new translucent paper Crystalcon, Sappi is adding another innovative product to its range of sustainable packaging papers. Used in combination with Sappi’s heat-sealable Seal Silk, the new paper delivers a recyclable, easy-to-implement packaging solution for a variety of food and non-food applications.

  • Crystalcon’s translucence allows consumers a direct view of the package content
  • No additional converting or finishing of the papers is required
  • From confectionery to envelopes and magazines, this is a sustainable packaging solution suitable for both food and non-food applications

Manufacturers are currently facing twin challenges: consumers are increasingly demanding more sustainable packaging solutions, but they also want to be able to examine product contents when walking through supermarket aisles. Currently, film is often used in whole or in part for such packaging.

With new translucent paper Crystalcon, Sappi is adding another innovative product to its range of sustainable packaging papers. Used in combination with Sappi’s heat-sealable Seal Silk, the new paper delivers a recyclable, easy-to-implement packaging solution for a variety of food and non-food applications.

  • Crystalcon’s translucence allows consumers a direct view of the package content
  • No additional converting or finishing of the papers is required
  • From confectionery to envelopes and magazines, this is a sustainable packaging solution suitable for both food and non-food applications

Manufacturers are currently facing twin challenges: consumers are increasingly demanding more sustainable packaging solutions, but they also want to be able to examine product contents when walking through supermarket aisles. Currently, film is often used in whole or in part for such packaging.

A sustainable packaging solution
The combination of Crystalcon with Sappi Seal Silk, from Sappi’s innovative Functional Paper Packaging division, offers a highly sustainable packaging solution. The Seal papers feature excellent heat-sealing properties and are recyclable through standard paper disposal systems. Meanwhile, the new translucent Crystalcon paper can be easily sealed onto Sappi Seal. The result is that this fast and sustainable packaging solution is well suited to both food and non-food applications.

Crystalcon is an uncoated, compostable translucent paper. Although not completely transparent, it allows sufficient visibility for consumers to examine the packaged product. From noodles and rice to magazines, viewing windows in envelopes or sales packaging for greeting cards, the possible applications are numerous.

Source:

Sappi Europe / Ruess Group

24.03.2022

C.L.A.S.S. ICON 2022: Applications open for third edition

On March 15th C.L.A.S.S. Eco Hub launched the 3rd edition of C.L.A.S.S. ICON Award, the annual competition with the aim of sponsoring and rewarding a visionary creative who is able to combine design, responsibility, innovation and communication.

The next selected winner of the international competition for visionary fashion creatives who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public, will be chosen in accordance to the principles of the C.L.A.S.S. Manifesto of Responsible Fashion (https://www.classecohub.org/wp-content/uploads/2022/03/Copia-di-C.L.A.S.S.-ICON-MANIFESTO-2.pdf).

The prestigious reward for the game changers of fashion counts C.L.A.S.S. support at 360° degrees, from material consultancy to communication support and a partnership-like engagement in C.L.A.S.S. activities both on and off-line. This specifically includes:

On March 15th C.L.A.S.S. Eco Hub launched the 3rd edition of C.L.A.S.S. ICON Award, the annual competition with the aim of sponsoring and rewarding a visionary creative who is able to combine design, responsibility, innovation and communication.

The next selected winner of the international competition for visionary fashion creatives who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public, will be chosen in accordance to the principles of the C.L.A.S.S. Manifesto of Responsible Fashion (https://www.classecohub.org/wp-content/uploads/2022/03/Copia-di-C.L.A.S.S.-ICON-MANIFESTO-2.pdf).

The prestigious reward for the game changers of fashion counts C.L.A.S.S. support at 360° degrees, from material consultancy to communication support and a partnership-like engagement in C.L.A.S.S. activities both on and off-line. This specifically includes:

  • 2 coupons valued 1000 € each to source responsibly on THE SMART SHOP, the inspirational materials’ bank and samples' e-shop, that includes a premium selection of the C.L.A.S.S. Material Hub’s materials
  • A consultancy session with C.L.A.S.S. TEAM: the ICON will have the chance to choose between an introduction to responsible innovation workshop or a specific session focusing on brand’s needs, for example responsible sourcing, certifications, communication.
  • Full communication support in terms of press releases, social media and events organisation

C.L.A.S.S. is also happy to announce that its partners will offer an exclusively customed package of marketing and communication activities:

  • Renoon is the app devoted to Responsible Shopping agglomerating thousands of ways to combine style and sustainability values may it be new, pre-loved and rental clothing. The package dedicated to C.L.A.S.S. ICON includes: a dedicated brand page on Renoon, the possibility to check and edit the description of the brand with Renoon's team and a featured article/interview on the new Renoon Library.
  • IDEE BRAND PLATFORM is a company based in Milan, which provides dedicated support in all commercial activity for design and fashion brands through the various stages of their growth steps. The package dedicated to C.L.A.S.S. ICON includes the support of the brand in commercial activities for SS23 and AW23/24.
  • SUSTAINABLE BRAND PLATFORM is a digital platform to measure, improve and communicate fashion brands sustainability making it simple and affordable. Through the creation of a real DIGITAL TOOLBOX SBP wants to give fashion brands all the instruments they need to obtain a global assessment of their sustainable performance. The package dedicated to C.L.A.S.S. ICON includes the Ecoscoring for brand’s sustainability and the creation of its Sustainable ID Card on Sustainable Brand Platform, as well as the use of the SBP logo, communication on social media and an interview in SBP/Magazine.
  • WHITE has always been attentive to the themes of responsible fashion and alongside the new generations of designers. That’s why they decided to support the international sustainability platform C.L.A.S.S. (Creativity, Lifestyle And Sustainable Synergy) with the annual award C.L.A.S.S. ICON, which promotes awareness in new sustainability values. For this reason, WHITE offers to the winner of C.L.A.S.S. ICON: a digital space on its WSM-WHITE platform and a physical space at the next show scheduled for September.

Applications are open until 1st May.
Email to classicon@classecohub.org, with a list of information such as brand vision and objectives, sustainability values and strategy, designer profile, a photo/video story of your latest collection, and any previous award (https://www.classecohub.org/c-l-a-s-s-icon).

21.03.2022

OEKO-TEX® Association turns 30: Trust, Safety, Sustainability

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

OEKO-TEX® market leadership
In 1992, 20 years before the United Nations announced the Sustainable Development Goals (SDGs), OEKO-TEX® launched STANDARD 100 by OEKO-TEX®, now one of the best-known labels for product safety.
"It emerged from the Schadstoffgeprüft nach ÖTN 100(tested for harmful substances according to ÖTN 100), developed by OETI in 1989 to address increasing public interest in textile ecology and health," the Austrian Textile Research Institute reminds us. The limit values and test methods on which STANDARD 100 by OEKO-TEX® is based were internationally standardized and are adapted to the latest scientific findings and legislation at least once a year - a principle that is applied to all OEKO-TEX® standards. Prof. Dr. Stefan Mecheels, the owner of the textile testing service provider Hohenstein, adds: "From the very beginning, we have considered the needs of all players in the textile value chain and continue to create solutions for current and future market requirements."

At least seven SDGs are firmly integrated into the OEKO-TEX® product portfolio. For example, Good Health & Well-Being (SDG 3) and Clean Water & Sanitation (SDG 6) are reflected in the STeP by OEKO-TEX® factory certification, and Responsible Consumption & Production (SDG 12) and Climate Action (SDG 13) are implemented through the comprehensive MADE IN GREEN by OEKO-TEX® product label.

Today, the international association consists of 17 independent research and testing institutes focused on textile and leather, with contact offices in over 60 countries. They are responsible for the joint development of the test methods and limit values in the OEKO-TEX® Standards and carry out laboratory tests and factory audits according to globally uniform specifications. These comprehensive product and process audits to ensure appropriate risk management, consumer and environmental protection, and legal compliance. With their wide-ranging research and development, the accredited OEKO-TEX® test institutes provide important insight for innovations within the textile and leather industry. They work in close cooperation with manufacturers and make a significant contribution to the development of high-quality textile and leather products at all stages of the value chain.

Mirror of social and political development
Being close to the market, and ideally, one step ahead is essential to supporting companies who are adapting to constantly changing conditions and meeting consumer expectations. Therefore, the development of OEKO-TEX® is not only a reflection of scientific knowledge but also of social and political trends. The focus is always on standardizing sustainable action and measures and making it easier for the industry to quickly and comprehensively implement sustainability goals.

Exchange with third parties is particularly valuable for this purpose. OEKO-TEX® participates in various international multi-stakeholder initiatives such as the Organization for Economic Co-operation and Development (OECD), the Partnership for Sustainable Textiles, the ZHDC (Zero Discharge of Hazardous Chemicals), and Greenpeace.
In addition to cooperation with external multi-stakeholder initiatives, the OEKO-TEX® International Advisory Board (IAB) meets annually. The core function of the IAB is to help review consistent and market-oriented Standards development proposals by the OEKO-TEX® Working Groups. In addition, OEKO-TEX® is conducting a public stakeholder consultation to gain further insights from all interest groups, which it will integrate into further development of the Standards.
Using three decades of experience for the future
The founding goal of enabling responsible choices that preserve our planet for future generations has become increasingly urgent over the past 30 years. So, OEKO-TEX® is even more resolute than ever in developing comprehensive solutions. We stand by industry and consumers as a trusted partner for the challenges ahead. In addition to the IMPACT CALCULATOR launched in January 2022, which helps STeP by OEKO-TEX® certified production facilities reduce their carbon emissions and water consumption, this summer, the association will launch a service to help companies transition to the upcoming Due Diligence Laws.

Source:

Oeko-Tex

27.01.2022

OCA, GOTS and Textile Exchange expand GM Cotton Testing Lab Initiative

Global Organic Textile Standard (GOTS), the Organic Cotton Accelerator (OCA) and Textile Exchange are delighted to announce the renewal of the global ISO IWA 32:2019 proficiency test for a second year in a row, under technical support from Wageningen Food Safety Research.

The initiative aims to provide the sector with an up-to-date overview of global laboratories that can currently conduct GMO testing as per the ISO IWA 32:2019 protocol – a common language among laboratories worldwide to screen for the potential presence of genetically modified (GM) cotton along the organic cotton value chain.

Global Organic Textile Standard (GOTS), the Organic Cotton Accelerator (OCA) and Textile Exchange are delighted to announce the renewal of the global ISO IWA 32:2019 proficiency test for a second year in a row, under technical support from Wageningen Food Safety Research.

The initiative aims to provide the sector with an up-to-date overview of global laboratories that can currently conduct GMO testing as per the ISO IWA 32:2019 protocol – a common language among laboratories worldwide to screen for the potential presence of genetically modified (GM) cotton along the organic cotton value chain.

The joint project involving three global NGOs in the textile sector, announces that it has reached a new milestone with an expanded list of twenty-one laboratories from Europe, Asia and North America who have successfully passed a new round of the proficiency test in 2021.

As qualitative GM cotton screening using the ISO IWA 32:2019 protocol is mandatory within the GOTS and OCS (Organic Content Standard) supply chain and OCA’s Farm programme, the expanded list will provide many stakeholders in Organic Cotton with the clarity they need for taking all reasonable precautions to prevent GM cotton in their organic cotton produce while supporting the rapid sector growth seen globally.

The updated overview of the laboratories that successfully passed the proficiency test in 2021 has now been jointly published by GOTS, OCA and Textile Exchange.

The initiative now in its second year, will drive greater transparency along the organic cotton supply chain in a move that the partners hope will become a fixed bi-annual initiative stemming from the positive feedback from the initial launch in 2020.

(c) Monfort
Full configuration of the Monforts and KMA Umwelttechnik line.
20.01.2022

Monforts: MonforClean brings Energy Savings for Albarrie

Albarrie – a major player in North America’s industrial nonwovens industry – is now benefiting from one of the first Monforts Montex stenter installations equipped with the full range of MonforClean heat recovery and exhaust air purification technologies.

With the new three-chamber Montex stenter at its plant in Barrie, Ontario, the Canadian company is treating specialised needlepunched nonwovens up to 4mm thick. These have applications in a wide range of filter media and performance fabrics.

The new Montex is enabling Albarrie to heat set and dry its materials to produce denser, higher quality fabrics which can also be finished and delivered to customers more rapidly.

Across timezones
It took a crew of skilled millwrights, electricians and product specialists to build the line which was delivered in 11 shipping containers to Albarrie’s production facility. The line was originally scheduled to be fully operational in the Spring of 2020, but the ongoing global Covid-19 pandemic inevitably led to several delays during the start-up and commissioning process.

Albarrie – a major player in North America’s industrial nonwovens industry – is now benefiting from one of the first Monforts Montex stenter installations equipped with the full range of MonforClean heat recovery and exhaust air purification technologies.

With the new three-chamber Montex stenter at its plant in Barrie, Ontario, the Canadian company is treating specialised needlepunched nonwovens up to 4mm thick. These have applications in a wide range of filter media and performance fabrics.

The new Montex is enabling Albarrie to heat set and dry its materials to produce denser, higher quality fabrics which can also be finished and delivered to customers more rapidly.

Across timezones
It took a crew of skilled millwrights, electricians and product specialists to build the line which was delivered in 11 shipping containers to Albarrie’s production facility. The line was originally scheduled to be fully operational in the Spring of 2020, but the ongoing global Covid-19 pandemic inevitably led to several delays during the start-up and commissioning process.

Energy savings
The Albarrie Montex line’s MonforClean capabilities include an air-to-air cross flow heat exchanger and an electrostatic precipitator providing the ability to purify the exhaust air and to recover energy to a maximum of 22,500 cubic metres of air per hour, resulting in a radical reduction in the conventional heat supply required. The MonforClean was developed in cooperation with partner KMA Umwelttechnik, based in Königswinter, Germany.

The fully automated system is powered by a Siemens SPS S7 controller and KP 700 touch panel from which the recycled energy can be continuously monitored and savings calculated.

The three-chamber Montex stenter is fitted with the latest Monforts Qualitex 800 PLC control system with WebUI, providing ease of operation, a full operating cost overview and maintenance monitoring.

Source:

Monfort