From the Sector

• Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

In the energy and transport sector, this means a vigorous and fast expansion of renewable energies, hydrogen and electromobility, the so-called decarbonisation of these sectors. The EU has already started pushing an ambitious agenda in this space and will continue to do so, for instance with the recently released ‘Fit for 55’ package.

However, these policies have so far largely ignored other industries that extract and use fossil carbon. The chemical and material industries have a high demand for carbon and are essentially only possible with carbon-based feedstocks, as most of their products cannot do without carbon. Unlike energy, these sectors cannot be “decarbonised”, as molecules will always need carbon. The equivalent to decarbonisation via renewable energy in the energy sector is the transition to renewable carbon in the chemical and derived materials industries. Both strategies avoid bringing additional fossil carbon from the ground into the cycle and can be summarised under the term “defossilisation”.

To decouple chemistry from fossil carbon, the key question is which non-fossil carbon sources can be used in the future. Rapid developments in biosciences and chemistry have unlocked novel, renewable and increasingly affordable sources of carbon, which provide us with alternative solutions for a more sustainable chemicals and materials sector. These alternative sources are: biomass, utilisation of CO2 and recycling. They are combined under the term “renewable carbon”. When used as a guiding principle, renewable carbon provides a clear goal to work towards with sufficient room to manoeuvre for the whole sector. It enables the industry to think out of the box of established boundaries and stop the influx of additional fossil carbon from the ground.

The systematic change to renewable carbon will not only require significant efforts from industry, but must be supported by policy measures, technology developments and major investments. In order to implement a rapid and high-volume transition away from fossil carbon, and to demonstrate its impact, a supportive policy framework is essential. The emphasis should be put on sourcing carbon responsibly and in a manner that does not adversely impact the wider planetary boundaries nor undermines societal foundations. An overarching carbon management strategy is required that also takes specific regional and application-related features into account, to identify the most sustainable carbon source from the renewable carbon family. This will allow for a proper organisation of the complex transition from today’s fossil carbon from the ground to renewable energy and to renewable carbon across all industrial sectors.

RCI has developed eleven concrete policy recommendations on renewable carbon, carbon management, support for the transformation of the existing chemical infrastructure and the transformation of biofuel plants into chemical suppliers. The policy paper “Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles” is freely available for download in both a short version and a long version.

Link for Download: https://renewable-carbon-initiative.com/media/library/

Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.

In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.

Based on the further expansion of the portfolio with sustainable products and new applications for e-vehicles as well as the increase in market share with existing and new customers, particularly in Asia, the Company expects a profitable revenue growth at market level in the medium term. Based on the expected revenue development, further progress in the turnaround of North America as well as the consistently practiced operational excellence in all business areas, Autoneum targets an EBITDA margin of 13% in the medium term. Accordingly, a solid free cash flow in the amount of 6% of revenue and a further increase in the equity ratio to over 35% are targeted. The Company still intends to pay a dividend to shareholders of at least 30% of the profit attributable to Autoneum shareholders.

From the 09-11^th of October, CHIC will take place with around 500 fashion and lifestyle brands on 53,000 sqm in the National Exhibition & Convention Center in Shanghai and offers a perfect overview of the fashion innovations in all fashion areas of the next season.

Chinese consumers place increasing value on sustainable products, the topic of "sustainability" is present in all areas of CHIC, in cooperation with WGSN the latest trends in sustainable fashion S / S 22 are shown. Together with China Fashion and WWD, companies that produce particularly sustainably are honored as part of the "Pursuer of excellence in sustainability" event.

The organizers put a special focus on the expansion of digital tools for the trade fair participants, which were used in the run-up to the trade fair for intensive visitor marketing and at the trade fair to optimally network supply and demand, WeChat plays a central role here. The CHIC WeChat mini program has been expanded and integrates the CHIC e-catalog, tailored to the needs of exhibitors and visitors.

The next editions of CHIC will take place from 3-5^th of November 2021 in Shenzhen and from 9-11^th of March 2022 in Shanghai.

• The success story of cellulose fibres continues - plastic bans drive innovation – 300 participants and 30 exhibitors are expected in-person and online
• 2-3 February, Cologne (Germany), hybrid event

Cellulose fibres are among the winners of the European 'Single-Use Plastics Directive (SUPD)', which has been in effect since July 2021 and entails plastic bans for a variety of single-use products. Cellulose is the main component of plant cell walls and a natural polymer. As a result, disposable products made of cellulose and cellulose fibres are not labelled as plastic and are explicitly excluded from the regulation. The success story of cellulose fibres will thus continue at a rapid pace with new developments and applications. Building on the success of this year's conference with 200 participants, the International Conference on Cellulose Fibres 2022 will again cover the entire value chain, from lignocellulose, chemical pulp, cellulose fibres such as rayon, viscose, modal or lyocell and new developments to a wide range of applications: Textiles of all kinds, nonwovens such as wet wipes and new areas such as composites or nanocellulose in the food industry. All these sectors have gained considerable momentum in recent years.

Cellulose fibres have been a success story within the textile market with a compound annual growth rate (CAGR) between 5 and 10 % over the last ten years and similar growth rates are expected in the coming decade. This makes cellulosic fibres the fastest growing fibre group in the textile industry and also the largest investment sector in the global bioeconomy.  The challenge now is to achieve a balance between the ongoing capacity expansion and the growing demand, to avoid overcapacity while still meeting rising demand from the major brands. These high growth rates are driven by the increased demand for natural fibres (and bottlenecks in cotton production), the microplastic issues, and bans on plastics in disposable applications. All three factors will continue to play an important role in the development of the sector in the future.

Focus of the conference

• Impact of plastic-bans on single-use products
• Transformation from fossil to renewable raw materials
• Challenges in developing new value chains
• Alternative raw materials for cellulose fibres
• Latest technology and market trends
• Market dynamics and stakeholders in the cellulose sector
• New ecosystems and partnerships
• Development of political environment
• Improvement of sustainability in production

Companies are now invited to submit presentations as well as their latest developments for the Innovation Award.

Call for Abstracts and Posters
Abstract submission is open now. Latest products, technologies, developments or market trends are welcome.
Deadline for submission: 15 October 2021

• From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

A particular focus will be placed on upcoming policies and regulations and how they impact renewable carbon. The members are currently deciding on where to start specifically, but questions that may be considered are: What does the new climate law and the “Fit for 55-Package” mean for chemicals and materials? What can be expected from REACH and microplastics restrictions? How relevant is the “Sustainable Products Initiative” and the coming restrictions for Green Claims? Circular Economy, Zero Pollution and Sustainable Financing are keywords of the future European landscapes, which might become very concrete for chemistry and materials in the next few years. To what extent the concept of renewable carbon for materials is considered in policy already and how it could be further introduced in future legislation are two of the main questions investigated in the working group “Policy”.

This working group is open to all members of RCI. Policy experts provide the respective analysis as a foundation, organising discussions between members of the policy group and plan meetings with policymakers to introduce the Renewable Carbon concept.

Additional working groups have been created, one with a focus on communication, the other looking at the development of a renewable carbon label. In early September, a renewable carbon community will be launched as a starting point for even more interaction between the members, to discuss strategies, create new value chains and start project consortia.

The Renewable Carbon Initiative (RCI) is a dynamic and ambitious group of interested parties. Membership numbers have now more than doubled since the launch almost a year ago, with RCI now boasting 25 members, 6 partners and over 200 supporters. It welcomes all companies that are on the way to transform their resource base from fossil to renewable.

• Organic cotton project with thriving prospects

Dibella is participating in a joint project to promote organic cotton cultivation in India. The project aims to protect organic cultivation through targeted training measures and by paying premiums to small farmers, to support the conversion from conventional to organic cotton, to increase crop yields and at the same time to achieve better fibre quality.

The demand for organically grown organic cotton is growing rapidly, but crop yields are lagging well behind global demand. The Alliance for Sustainable Textiles (Berlin), initiated by Development Minister Dr. Gerd Müller, therefore wants to increase organic cotton volumes for its member companies with practical solutions. In cooperation with the Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ), it is now promoting a forward-looking project for which Dibella provided the impetus.

"In India, it is mainly micro-farms and village cooperatives that are active in organic cotton cultivation. Conversion of additional land and sustainable management could increase yields and fibre quality of organic cotton. The Chetna Organic initiative, with which we have been working successfully for many years, advises the farmers in these processes. It supports the farmers and village communities with targeted education, training and practical assistance in organic farming, thus preparing the ground for better income and living conditions for the families," says Ralf Hellmann, Managing Director of Dibella.

Several alliance partners - Dibella, Fairtrade Germany, GIZ, Organic Cotton Accelerator (OCA) and Tchibo - have taken the exemplary initiative as an opportunity to promote the cultivation and expansion of organic cotton in India. In cooperation with Chetna Organic, they focus on supporting Indian women's cooperatives, women farmers and families in the production of organic cotton as part of the "Organic Cotton Pilot Project". Tchibo and Fairtrade subsidise micro-farms during the conversion phase of the fields (the fibres are only recognised as organic cotton four years after conversion) and contribute to the provision of GMO-free seeds, which have become a scarce commodity in India. Together with Dibella, they finance training courses that teach the optimal use of natural rainfall as well as efficient, ecological cultivation methods, which subsequently lead to improved fibre quality. In addition, they commit to purchasing Fairtrade organic cotton for many years.

Ralf Hellmann: "The pilot project enables us to expand our Dibella Good Textiles collection because it guarantees us long-term access to fair-trade organic cotton. At the same time, it improves the living conditions of the small-scale farmers and their families. We therefore hope that "Organic Cotton" will also set a precedent in other cotton growing regions and bring organic farming forward in India."

• Swiss weaving machinery manufacturers are in the forefront of novel application development

Shoes and electronic calculators are probably not the first products people would associate with the textile weaving process. But they certainly signpost the future for woven fabrics, as two examples of the ever-wider possibilities of latest technology in the field. Fashion and function already combine in the increasing popularity of woven fabrics for shoes, and this is a present and future trend. Calculators in fabrics? That’s another story of ingenious development, using so-called ‘meander fields’ on the back and keys printed on the front of the material.

These glimpses of the outlook for modern weavers are among the highlights of developments now being pioneered by Swiss textile machinery companies. All weaving markets require innovation, as well as speed, efficiency, quality and sustainability. Member firms of the Swiss Textile Machinery Association respond to these needs at every point in the process – from tightening the first thread in the warp to winding the last inch for fabric delivery. They also share a common advantage, with a leading position in the traditional weaving industry as well as the expertise to foster new and exciting applications.

Technology and research cooperation
The concept of a ‘textile calculator’ was developed by Jakob Müller Group, in cooperation with the textile research institute Thuringen-Vogtland. Müller’s patented MDW® multi-directional weaving technology is able to create the meander fields which allow calculator functions to be accessed at a touch. A novel and useful facility, which suggests limitless expansion.

Today, the latest woven shoes are appreciated for their precise and comfortable fit. They score through their durability, strength and stability, meeting the requirements of individual athletes across many sports, as well as leisurewear. Stäubli is well known as a leading global specialist in weaving preparation, shedding systems and high-speed textile machinery. Its jacquard machines offer great flexibility across a wide range of formats, weaving all types of technical textiles, lightweight reinforcement fabrics – and shoes.

It’s possible to weave new materials such as ceramics, mix fibers such as aramid, carbon and other, and produce innovative multi-layers with variable thicknesses. Such applications put special demands on weaving machines which are fulfilled by Stäubli high-performance TF weaving systems.

Great weaving results are impossible without perfect warp tension, now available thanks to the world-leading electronic warp feeding systems of Crealet. Some market segments in weaving industry today demand warp let-off systems which meet individual customer requirements. For example, the company has recognized expertise to understand that geotextile products often need special treatment, as provided by its intelligent warp tension control system. Individual and connective solutions are designed to allow external support via remote link. Crealet’s warp let-off systems are widely used in both ribbon and broadloom weaving, for technical textiles applied on single or multiple warp beams and creels.

Functional, sustainable, automated
Trends in the field of woven narrow fabrics are clearly focused on functionality and sustainability. The Jakob Müller Group has already embraced these principles – for example using natural fibers for 100% recyclable labels with a soft-feel selvedge. It also focuses as much as possible on the processing of recycled, synthetic materials. Both PET bottles and polyester waste from production are recycled and processed into elastic and rigid tapes for the apparel industry.

For efficient fabric production environments, it is now recognized that automated quality solutions are essential. Quality standards are increasing everywhere and zero-defect levels are mandatory for sensitive applications such as airbags and protective apparel.

Uster’s latest generation of on-loom monitoring and inspection systems offers real operational improvements for weavers. The fabric quality monitoring prevents waste, while the quality assurance system significantly improves first-quality yield for all applications. Protecting fabric makers from costly claims and damaged reputations, automated fabric inspection also removes the need for slow, costly and unreliable manual inspection, freeing operators to focus on higher-skilled jobs.

Smart and collaborative robotics (cobots) offer many automation possibilities in weaving rooms. Stäubli’s future oriented robotics division is a driver in this segment with first effective installations in warp and creel preparation.

Control and productivity
Willy Grob’s specialized solutions for woven fabric winding focus on reliable control of tension, keeping it constant from the start of the process right through to the full cloth roll. Continuous digital control is especially important for sensitive fabrics, while performance and productivity are also critical advantages. In this regard, the company’s large-scale batching units can provide ten times the winding capacity of a regular winder integrated in the weaving machine.

The customized concept by Grob as well as design and implementation result in great flexibility and functionality of the fabric winding equipment – yet another example of Swiss ingenuity in textile machinery.  
There is even more innovation to come in weaving – and in other segments – from members of the Swiss Textile Machinery Association in future! This confident assertion is founded on an impressive statistic: the 4077 years of experience behind the creative power of the association’s member firms. It’s proof positive that their developments grow out of profound knowledge and continuous research.

• Major Monforts denim customers continue to pioneer new initiatives that are pushing the boundaries of sustainable production.

Recycling their cotton waste has become one way these companies can do more with less, and at the recent Kingpins24 Flash online event, Sedef Uncu Aki, director of Orta, headquartered in Istanbul, Turkey, announced a new partnership with leading recycling operation Gama Recycle.

Traceable
“Through this local partnership we will supply the waste from our spinning mills and return around 3,000 tons of premium quality cotton back to them,” she said. “We have established a truly controlled and traceable system and partnering with a domestic recycling centre is important because a lot the carbon emissions associated with recycling usually come from transportation.”

Orta’s ZeroMax range meanwhile uses no cotton at all, being based on Lenzing’s Tencel cellulosic fibre, while the company’s involvement in denim production for a recent launch by Levi Strauss, of jeans made with organic cotton and Circulose – a breakthrough material developed by re:newcell of Sweden and partners – was hailed as a further step forward.

To make Circulose, re:newcell repurposes discarded cotton textiles, such as worn-out denim jeans, through a process akin to recycling paper. The incoming waste fabrics are broken down using water. The colour is then stripped from these materials using an eco-friendly bleach and after any synthetic fibres are removed from the mix, the slurry-like mixture is dried and the excess water is extracted, leaving behind a sheet of Circulose. This sheet is then made into viscose fibre which is combined with cotton and woven into new fabrics.

Circular Park
Omer Ahmed, CEO of Artistic Milliners also announced plans for his company’s new 70,000 square-foot Circular Park in Karachi, Pakistan, at Kingpins24 Flash.

Once complete, this will add three million square metres of additional denim capacity a month to the company’s production and take its total recycled output to a monthly five million metres.
Ahmed observed that there is currently a lack of sustainable fibres that are readily available to use for denim production at scale.

“Organic cotton is too expensive, and in my opinion always will be,” he said. “Cottonised hemp is also not cheap and it’s hard to mix with cotton, while the new regenerated cellulose fibres that are now emerging are promising, but currently in short supply. Recycled polyester is meanwhile still based on petroleum resources which we want to move away from. As a consequence, there are only a few other options for us as a manufacturer and this new project will help us minimise our own waste while significantly lowering our carbon footprint.”

Other Monforts denim customers to introduce cotton fibre recycling operations at their plants recently include AGI Denim, Bossa and Soorty.

Vertical savings
Refresh is the name of the latest collection from AGI Denim – reflecting the company’s significant reduction in water consumption.

The company has just opened new fibre spinning and denim mills at its complex in Karachi, Pakistan.

“Over the years we’ve gone through a series of backward integration steps to become fully vertical,” said AGI Denim executive director Ahmed Javed, at Kingpins24 Flash. “In our latest expansion, we revisited every step of the production processes in order to make resource savings.”

Innovations have included the installation of proprietary robotics for garment finishing, but the most attention has been paid to water savings.

“Pakistan is one of the largest cotton-producing companies in the world and we’re fortunate that the type of cotton that is grown here is well suited to denim production and also helps us lower our carbon footprint, with everything done in close proximity,” Javed said. “In the lifecycle of a pair of denim jeans, however, cotton fibre production contributes 68% of water consumption. While we cannot control how much water cotton needs for it to grow, we can rethink the way we use it in our factory.”

Refresh-branded denims are washed from 100% recycled water as a result of the company’s new wastewater treatment plant, which puts production wastewater through a series of steps beginning with equalisation, followed by aeration and concluding with sedimentation. The water travels through filtration and ultrafiltration systems before being subjected to an activated carbon system and finally a reverse osmosis system to reduce any dissolved salts.

AGI now recycles 4.4 million gallons of water each month – enough to wash a million pairs of jeans.

Sustainable
Monforts has a leading position in the field of denim finishing with its well proven Thermex continuous dyeing systems, Montex stenter dryers and other lines for resource-efficient and economical processing.

“Our denim partners are constantly setting themselves new goals in respect of sustainable production – and more importantly, achieving them,” says Hans Wroblowski, Monforts Head of Denim. “We work closely with them with the aim of constantly optimising processing parameters and achieving further savings in energy, water and raw materials throughout the dyeing and finishing stages of production.”

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing. The CYD system integrates new functions and processes into the weaving preparation processes to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre in Mönchengladbach, Germany.”

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

“We’re pleased to collaborate with Sateri as one of their first brand partners for FinexTM. Sateri’s dedication to this partnership made it possible for Lafuma to produce T-shirts with this fine quality fibre in a short time. T-shirts made with FinexTM will be among the offerings Lafuma has in store for the 618 festival as we look to support environmentally-friendly and excellent performance solutions to strengthen our position as a leading outdoor apparel brand,” said Wu Qian, General Manager of Lafuma China.

Echoing similar sentiments is Rico Lee who established his own independent label in 2014, “I jumped at the opportunity to collaborate with Sateri when they approached me because FinexTM encapsulates what my brand stands for – Beautiful Technology that combines function and fashion.”

Tom Liu, Sateri’s Commercial Vice President said, “Like our flagship brand EcoCosy®, FinexTM is made from bio-based natural fibres. Innovation and technology has made cellulosic textile fibre recycling possible and FinexTM represents how nature not only renews itself but that products made from nature can also be regenerated. This, at its heart, is what circular fashion looks like. Our brand promise to customers remains constant– Sateri’s products are sustainable, high quality, efficient, and cost-effective. The FinexTM tagline ‘Together For A Better Next’ expresses our aspiration to be the partner of choice for next-generation fibre - we thank Lafuma and Rico Lee for pioneering with us on this quest.”

Last month, Sateri announced its entry into China’s Lyocell fibre market. The recent string of product portfolio expansion announcements is underpinned by Sateri’s business strategy to capture value. Allen Zhang, President of Sateri said, “Being the world’s largest viscose producer gives us the advantages that come with volume, but value is what we hope differentiates us. By this, we don’t only mean higher value products like Lyocell or FinexTM but also the value we bring to communities, country, climate and customers.”

Globally, less than 1% of material used to produce clothing is recycled into new clothing. This presents a big opportunity for textile fibre recycling, particularly in China which is the largest textile producing country in the world. Last month, Sateri became a council member of the China Association of Circular Economy (CACE). The company will work closely with CACE’s Textile Waste Comprehensive Utilisation Committee to establish standards and promote industrial-scale textile waste recycling. Sateri is part of the Singapore-based RGE group of companies which has committed USD200 million into next-generation textile fibre innovation and technology.

• Italian expertise, research and green innovation.
• METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.