From the Sector

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

Garmon Chemicals confirms itself as a pioneer in chemistry specifically applied to garment treatment, at the forefront in terms of product research and active promotion on the sustainable issue. The Dutch show is the ideal stage to present a preview of the latest innovation born out of Garmon’s volcanic R&D department. It is Avol Lime, the revolutionary and ecologicallyadvanced neutralizing agent. Used in combination with Avol Oxy White (the bleaching agent that represents the safe alternative to potassium permanganate), it allows to obtain a fully safe and sustainable bleaching process.

white&green: solutions for eco-bleaching
white&green is the ultimate solution to obtain a safe and sustainable jeans discoloration process. The new line provides two avant-garde solutions: two highly performant products, both representing a safe and conscious alternative.
Two souls presenting unique characteristics:

The “white” soul

• the hightest level of whiteness
• superior bright shades
• stylish vintage looks
• extraordinary contrasts

The “green” soul

• safe alternative to dangerous products
• significant energy savings
• classified in ZDHC gateway (from level 1)
• greenofchange® approved

Virginia-based Launderer Recognized for Commitment to Sustainability and Conservation Practices
Handcraft Linen Services, the Richmond, VA-based independent medical launderer, has been certified Clean Green, reflecting the company’s dedication to operational efficiency and sustainability. Linen, uniform and facility services companies receive this distinction by adhering to TRSA-designated water and energy use thresholds and deploying best management practices (BMPs) consistent with the ASTM International environmental laundering standard.
 
Handcraft Linen Services’ customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:
•             Recovering heat from drained hot water and heat dispersed from the process of warming water
•             Recapturing drained water from rinses for reuse
•             Using environmentally friendly detergents
•             Removing solids and liquids from wastewater
•             Solar energy and energy-efficient lighting
•             Recycling programs
•             Re-routing trucks to save vehicle fuel
•             Spill prevention plans
 
The Clean Green certification is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.
Clean Green aligns with the ASTM International standard, Guide for Sustainable Laundry Practices, which recognizes key criteria for the certification as universal indicators of maximum sustainability in commercial laundry work. ASTM’s review of TRSA BMPs verified these as the most effective and practical techniques for a laundry to achieve green objectives.
TRSA members prompted development of the standard, which was vetted in the sustainability subcommittee of the ASTM Committee on Textiles. Top technical experts, scientists and environmental professionals from outside the linen, uniform and facility services industry reviewed the BMPs. ASTM is the global leader in developing and delivering voluntary consensus standards unparalleled in building consumer confidence in product and service quality.
 
“I applaud Handcraft Linen Services for their sustainability efforts and maintaining the highest standards in their production and delivery operations,” said Joseph Ricci, TRSA president and CEO. “Meeting all the criteria for certification is not easy, but the company is committed to industry-leading processes and technologies.”

 

• Italian expertise, research and green innovation.
• METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.

California Linen Services of Pasadena, Calif. has been recertified Clean Green, reflecting the company’s dedication to standards for operational efficiency and sustainability. The certification quantifies linen, uniform and facility services’ environmentally friendly performance by confirming an operation launders within TRSA-designated water and energy use thresholds; and verifies use of best management practices (BMPs) in line with the ASTM International environmental laundering standard.
 
California Linen Service’s customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:

• Recovering heat from drained hot water and heat dispersed from the process of warming water
• Recapturing drained water from rinses for reuse
• Using environmentally friendly detergents
• Removing solids and liquids from wastewater
• Solar energy and energy-efficient lighting
• Recycling programs
• Re-routing trucks to save vehicle fuel
• Spill prevention plans

California Linen Service earned the Clean Green certification initially in 2015. The designation is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.
Clean Green aligns with the ASTM International standard, Guide for Sustainable Laundry Practices, which recognizes key criteria for the certification as universal indicators of maximum sustainability in commercial laundry work. ASTM’s review of TRSA BMPs verified these as the most effective and practical techniques for a laundry to achieve green objectives.
TRSA members prompted development of the standard, which was vetted in the sustainability subcommittee of the ASTM Committee on Textiles. Top technical experts, scientists and environmental professionals from outside the linen, uniform and facility services industry reviewed the BMPs. ASTM is the global leader in developing and delivering voluntary consensus standards unparalleled in building consumer confidence in product and service quality.
 
“I applaud California Linen Services for their ongoing sustainability efforts and maintaining the highest standards in their production and delivery operations,” said Joseph Ricci, TRSA president and CEO. “Meeting all the criteria for certification is not easy, but the company is committed to industry-leading processes and technologies.”