From the Sector

Monforts is introducing a range of modular upgrades that can be added to existing finishing lines already in production.

The Monforts universal Energy Tower – a flexible, free-standing air/air heat exchanger for recovering the heat from the exhaust air flow of thermal processes – can result in a 30% reduction in the energy consumed by a line, depending on the exhaust air volume and operating temperature.

A Monforts Eco Booster, completely integrated into the chamber design of the Montex stenter, is another retrofitting option. As a single state-of-the-art heat recovery system with automatic cleaning, it can be added to existing ranges. For ranges of up to eight chambers only one module is necessary to achieve significant energy savings.

On an eight-chamber stenter with an operating width of two metres carrying out a fixing process on a 150gsm woven fabric, for example, the energy savings have been calculated to be 35% over an annual schedule of 6,000 operating hours.

In addition, the Eco Booster consumes only minimal amounts of water during the cleaning cycle and the entire process is controlled and monitored automatically.

The Matex Eco Applicator is an alternative to the conventional padding process for energy-conscious finishing and achieving considerable savings in the energy required for drying treated fabrics. The precise amount of chemical can be applied to the fabric and with less residual moisture after application of only approximately 35% so that less drying capacity is required in the stenter, which leads to huge energy savings.

Finishes can be evenly applied on either or both sides of the fabric, and two separate treatments can be applied to front and back. This makes the unit ideal for the production of, for example, double-performance hydrophobic/hydrophilic fabrics for professional clothing, as well as the over dyeing or finishing of denim fabrics.

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

In addition, renewed coronavirus-related lockdowns in China are delaying growth in Asia. According to the revised market forecasts1), global automobile production is expected to reach 80.4 million units in 2022, which represents an increase of 4.1% compared to 2021. Growth will thus be significantly lower than was still expected in mid-February.

Autoneum will do its utmost to minimize the impact on the Group. Despite the present challenges, the strategy will continue to be consistently implemented with a focus on innovative and sustainable technologies for growing markets of the future.

Based on current developments and knowledge, Autoneum has updated the forecasts that it presented at the Media Conference, which had not yet included the impacts of the war as outlined above. Autoneum continues to expect revenue to develop in line with the market. For the first half of the year, the Company expects an EBIT margin at break-even level. On the basis of the ongoing collaborative discussions with customers to participate in the sharing of the sharply increased energy and material costs, Autoneum anticipates an improvement in the EBIT margin to 2.0 to 3.0% (previously: 4.0 to 5.0%) for the full year 2022. Free cash flow for 2022 is expected to be in the mid to high double-digit million range.

Autoneum is very well positioned for the transformation of the automotive industry towards e-mobility and sustainability. Our product portfolio is suitable for all drive types, whether internal combustion, hybrid or pure electric vehicles. The medium-term forecasts that Autoneum published in November 2021 remain unchanged positive. The timing of the market recovery will be delayed by current events and will also depend on further geopolitical developments.

Bemberg™ is teaming up with MagnoLab, a network of Biella-based companies apt to carry out projects related to sustainability and circular economy, to create and display T-shirts that combine environmental responsibility and aesthetic research at the 102nd edition of Pitti Uomo.

Bemberg™ is used in shirts, cocktail dresses, dust coats, coordinates, outerwear and more by international brands operating in the fashion and luxury industries. To demonstrate its journey and evolution in contemporary style, Bemberg™ has collaborated with MagnoLab to develop a project that resulted in contemporary cut I-shirts presented both in sheer and blends with other certified fibers, including GOTS cottons and RWS wools, capable of enhancing both the hand of the final garment and the performance of the yarn.

The project conceived for Pitti Uomo 102 stems from the spirit of Bemberg™ and fits perfectly into the philosophy of MagnoLab, whose mission is to carry out projects related to environmental responsibility through a joint and participatory approach of partners, and to create value by developing innovative products and processes with rapid testing cycles, according to a lean management model.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

On display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible by taking advantage of the fact that flat knitting as a textile production method is capable of producing end products that are shaped-to-form and with added thickness. Compared to current methods of preform production, savings in post-processing time, material, labor and associated costs are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

SHIMA SEIKI's SDS®-ONE APEX4 3D design system will be available for demonstrations as well. Of particular interest should be its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time, cost and material normally associated with producing actual samples for each variation. When approved, the same data can be converted to machine data for immediate knitting, significantly reducing lead times.

• Strategy and purpose affirm Borealis Group vision to be a global leader in advanced and sustainable chemicals and material solutions
• Sustainability at the centre of all activities, supporting OMV Group’s ambition for a net zero business by 2050
• Strong foundation supports continued geographic expansion with enhanced focus on Middle East and Asia, North America

Borealis announces the introduction of the Borealis Strategy 2030. At the core of this strategic evolution is sustainability, which is supported by the Borealis foundation of dedication to safety first, its people, innovation and technology, and performance excellence. This foundation powers continued geographic expansion and the ongoing transformation towards the circular economy. The strategy stipulates new and more ambitious sustainability targets with regard to greenhouse gas (GHG) emissions reductions, energy consumption, and the circular economy. Underlying the Borealis Strategy 2030 is an evolved purpose, “Re-inventing Essentials for Sustainable Living,” whose intent and spirit is shared across the OMV Group.*

* See attached document for more information.

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Similar to EFI’s Fiery® digital front end and RIP technologies for the digital commercial and industrial printing markets, Inèdit’s neoStampa product is a recognized benchmark solution for RIPs in digital textile printing. The Inèdit product portfolio features advanced workflow solutions for textile profiling, calibration, design integration and much more. Inèdit’s RIP technology is employed across the worldwide textile industry and is one of the leading RIPs used to drive EFI Reggiani digital printers and other digital industrial textile printer brands. As part of EFI Reggiani, Inèdit will continue to support products for a broad range of digital printers.

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Eccentric screw pumps – robust all-rounders convey any medium
The requirements for pumps are considerable, as the demand for customized solutions for increasingly complex processes is rising. This is particularly true for Oerlikon Barmag’s new eccentric screw pump range. High wear-resistance, increased durability and robust operation – the new pump is tailor-made for conveying highly-filled, high-viscosity and abrasive media, such as filled adhesives, filled silicones and filled casting compounds, for example. The is the multi-stage seal system, which considerably increases the pump’s lifespan. The upstream shaft sealing ring protects the slide ring seal against excessively-fast wear caused by challenging media. In turn, the optimum alignment of the drive shaft – ball bearing-supported and centrally-guided through the shaft sealing ring – prevents any metal debris caused by friction and hence ensures considerably greater durability. Producers benefit from considerably greater productivity, as the pumps’ maintenance intervals and hence machine downtimes are significantly reduced.

New pump for shear-sensitive materials
For increasingly complex customer-specific process solutions, Oerlikon Barmag is now expanding its GA series, developed especially for the challenging conveying of high-viscosity media, to include the GAB51F for shear-sensitive conveying media. The newly-developed pump with its viscosity range of max. 300 Pas is tailored to conveying high-viscosity, shear-sensitive materials such as adhesives and silicones, for example. “The shear forces impacting the medium within the pump are reduced to a minimum as a result of a specially geometry”, explains Thorsten Wagener, Senior Sales Manager within the Pump Construction business unit. The material is conveyed through the pump in an as gentle and low-pulsation manner as possible and metered precisely at the outlet – ensuring it retains its characteristic properties.

High-speed metering pump with sealed product space
The high-speed metering pump has been especially developed for metering poorly-lubricating media. Here, the main benefit is the sealed product space, which extends the pump’s lifespan considerably. The space that comes into contact with the media is limited to the area around the gears. “As a result, the high-speed pump is particularly suited for applications in the chemicals industry, which frequently involve aggressive acids”, comments Thorsten Wagener.

GM series for low-viscosity media
The pumps in the GM and GA series provide precision metering with low-pulsation feeding of the conveying medium. The multi-stage GM pump conveys low-viscosity media (i.e. 250 bar, 100 mPas) even under high pressure and in the most challenging conditions. The square design from the proven GM series is the standard pump for many metering tasks. The development of the multi-stage pump expands the applications range for the GM series considerably. The round 2-stage GM pump has been developed especially for use in high-pressure technology. It masters the particular challenge of conveying small throughputs with low viscosities. The pump is perfect for 0.05 through 20 cm³/rev feed sizes and is excellently suited for use in high-pressure machines for PUR molded parts, foam slab stock, refrigeration unit insulations and sandwich panels, for example.

GA series pumps for high-viscosity media
The Oerlikon Barmag GA range has been especially developed for the challenging conveying of media with higher viscosities. The GA series pumps are available for conveying volumes of between 1.25 and -30 cm³/rev (0.6-144 l/h). They have been designed for pressures of up to 200 bar, for viscosities of up to 1.500 Pas as well as for temperatures of up to max. 225 °C. With this range of pumps, Oerlikon Barmag offers its customers tailor-made solutions for many technical processes in which high-precision and even metering is of paramount importance.

The drum pump – conveying and metering using a single unit
With the drum pump, the Oerlikon Barmag pump specialists have created a pump designed specifically for conveying and metering high-viscosity materials such as adhesives, silicones and other high-viscosity materials from drums and other large containers and for pressures of up to 250 bar. Its special features not only include the fact that it removes high-viscosity materials from the drum, but that it also meters the medium directly without any additional interim stops.

Der Bundesverband Medizintechnologie (BVMed) spricht sich in seiner Stellungnahme zum Vorschlag der EU-Kommission einer Lieferkettensorgfaltspflichten-Richtlinie „Corporate Sustainability Due Diligence Directive“ (CSDDD) für einen Abgleich mit dem bereits bestehenden nationalen Gesetz und für eine Begrenzung der Regelungen auf die direkten Zulieferer aus.

„Wir begrüßen eine Stärkung von Menschenrechten weltweit. Der EU-Kommissionsvorschlag ist jedoch aus Sicht des BVMed in seiner momentanen Fassung unzureichend, um rechtssichere und praktikable Regeln für Unternehmen zu schaffen. Es besteht vielmehr die Gefahr, dass der Entwurf die Unternehmen der Branche, die sich im Moment ohnehin schon mit angespannten Lieferketten konfrontiert sehen, überfordern und in der Umsetzung überlasten könnte“, kommentiert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Deutschland habe mit dem Lieferkettensorgfaltspflichten-Gesetz (LkSG) bereits eine umfassende nationale gesetzliche Regelung über die unternehmerischen Sorgfaltspflichten zur Vermeidung von Menschenrechtsverletzungen in der Lieferkette geschaffen. „Viele Medizintechnik-Unternehmen in Deutschland und andere wirtschaftliche Akteure im Gesundheitswesen wie beispielsweise die Krankenhäuser bereiten sich intensiv auf die Umsetzung des LkSG vor. Eine Abänderung des LkSG als Folge einer stark abweichenden EU-Richtlinie würde erheblichen Mehraufwand und Kosten für die betroffenen Unternehmen in Deutschland bedeuten“, so BVMed-Nachhaltigkeitsexpertin Clara Allonge.

Der BVMed spricht sich daher für eine mit dem deutschen Lieferkettengesetz kompatible und praxistaugliche europäische Regelung aus. Dies sei im aktuellen Vorschlag der EU-Kommission durch die deutliche Erweiterung des Anwendungsbereiches, beispielswiese durch die Einbeziehung von negativen Umweltfolgen, sowie die Einführung einer zivilrechtlichen Haftung nicht gegeben. „Als Lösung könnte hier eine Begrenzung auf die direkten Zulieferer greifen“, heißt es in der BVMed-Stellungnahme.

Der BVMed konzentriert sich in seiner Stellungnahme zum CSDDD auf vier Punkte:

1. Als Anforderungen an eine praxistaugliche Lieferkettenregulierung müsse der Anwendungsbereich eindeutig auf die direkten Zulieferer begrenzt werden. Während Unternehmen in direkten Geschäftsbeziehungen in der Lage sind, Sorgfaltspflichten effektiv zu adressieren und Verantwortung zu übernehmen, so ist dies in der weiteren und immer komplexer werdenden Lieferkette nicht der Fall.
    
2. Es sei nicht sinnvoll, grundlegende Bewertungen über die menschenrechtliche Situation in die Hände einzelner Unternehmen zu legen, während sich der Staat an dieser Stelle aus der Verantwortung zieht. Daher sollten die Mitgliedsstaaten der EU eine Liste von Ländern erstellen, bei denen Unternehmen annehmen können, dass die Zulieferer aus diesen Ländern alle Kriterien erfüllen. Eine solche Safe Harbour-Regelung würde einen klaren und erfüllbaren Rahmen bieten in dem die Unternehmen unter stabilen Bedingungen operieren können. Dies verringerte den Verwaltungsaufwand und die Rechtsrisiken für die Unternehmen erheblich.
    
3. Es ergeben sich bei den Umweltfolgen erhebliche Unklarheiten, was die konkrete Auslegung angehe. Einerseits wäre es wünschenswert, wenn die jeweiligen Rechtsnormen des Heimatlandes des Zulieferers für die Bewertung herangezogen würden, andererseits bringe die Bewertung einer Vielzahl von lokalen Umweltgesetzen viele Unternehmen an den Rand der Leistbarkeit. Der Anwendungsbereich des Gesetzes sollte sich auf die Achtung der Menschenrechte konzentrieren. Eine Erweiterung um den Bereich „Umwelt“ würde aufgrund uneinheitlicher Standards zusätzliche Rechtsunsicherheit schaffen. Das gelte auch für das Vorhaben, in dieser Richtlinie Klimaschutzziele festzuschreiben.
    
4. Nach Einschätzung des BVMed umfasst der Begriff der „Wertschöpfungskette“, wie im Richtlinienvorschlag angeführt, auch die Kund:innen der Branche (beispielsweise Krankenhäuser). Wenn dem so sei, könnte der Fall eintreten, dass Medizintechnik-Unternehmen einzelne Kunden, falls diese gegen die Kriterien der Richtlinie verstoßen, nicht mehr beliefern dürften und die Versorgung von Patientinnen und Patienten eventuell nicht sichergestellt werden könne. Dies wäre aus humanitären Gesichtspunkten eine nicht akzeptable Einschränkung der Versorgung und träfe insbesondere Patientinnen und Patienten in Drittländern und Ländern mit bereits heute eingeschränkter Gesundheitsversorgung. Der Verband schlägt daher vor, dass für den sogenannten Downstream-Teil der Wertschöpfungskette eine humanitäre Ausnahme etabliert wird. Dies könne analog zur Regelung bei Sanktionen (beispielweise bei den Russland-Sanktionen) vollzogen werden.

• Sustainable Apparel Forum (SAF) organized in Dhaka to Accelerate Apparel Sustainability in Post-Covid

Policy makers, industry leaders, brands’ representatives and fashion campaigners from home and abroad gathered in Dhaka yesterday to accelerate momentum of sustainability in Bangladesh apparel industry.

More than 50 speakers as well as 20 green growth exhibitors from over 20 countries participated in the 3rd edition of Sustainable Apparel Forum (SAF) organized by Bangladesh Apparel Exchange (BAE) partnering with Bangladesh Garment Manufacturers & Exporters Association (BGMEA).

Five plenary sessions on ‘Demystifying Climate Action’, ‘Purchasing Practice’, ‘ESG (Environmental, Social & Governance) & Green Finance’, ‘Closing the Loop: Circular Economy in the Fashion Industry’, and ‘Due Diligence and Legislation’ held at the SAF along with an opening plenary and a closing plenary.  

Denim Première Vision marks the denim ingredient brand’s return to the tradeshow scene. Under the spotlight is “Iconic by nature”, ISKO’s show concept illustrates the company’s journey of evolution led by its signature Responsible Innovation™ approach. On this occasion, ISKO launches its 2023 Collection Vol.2 with new technologies, finishes and colors, and expressing the company’s passion for a cleaner and safer planet, laying the new foundations of ISKO’s sustainable fashion revolution.

The entire 2023 Collection Vol.2 contains recycled materials, and the majority consists of R-TWO™50+ fabrics made with a minimum of 50% recycled fibers, entirely GRS certified, resulting in less use of natural resources and a reduced carbon and water footprint of up to 45% and 65% respectively. An important and responsible development of this collection is that it features denim containing recycled and/or regenerated fibers, through unique fiber technology significantly saving on resources and energy while allowing for controlled traceability along the supply chain.

The new collection features comfortable ISKO Reform™ Xp 100, allowing for a flattering fit and enhanced shape retention; ISKO Reform™ Hp, characterized by incredible holding power, granting a more streamlined and slimmer appearance; ISKO Blue Skin™, a stretch technology that works 4-ways to respond to the body’s movement like a second skin; ISKO Pop™, a patented concept that starts from the yarn, developed to give a touch of glamour with a soft cotton hand feel. Colors are key in the new collection too, with an important aspect regarding the use of mineral colors, natural dyestuffs.