From the Sector

Reset
197 results
BVMed veröffentlicht Broschüre zu PRRC-Pflichten (c) BVMed
13.09.2023

BVMed veröffentlicht Broschüre zu PRRC-Pflichten

Hersteller von Medizinprodukten müssen nach der EU-Medizinprodukte-Verordnung (MDR) eine zuständige Person für die Einhaltung der Regulierungsvorschriften, kurz PRRC, benennen. Welche Aufgaben und Pflichten diese Expert:innen erfüllen müssen, darüber informiert der Bundesverband Medizintechnologie (BVMed) in einer neuen Broschüre mit dem Titel „Die für die Einhaltung der Regulierungsvorschriften verantwortliche Person (PRRC) gemäß Art. 15 MDR“.

Die neue BVMed-Broschüre beschreibt die wichtigsten Anforderungen hinsichtlich der Qualifikation, der Aufgaben und der Einbindung der PRRC im Unternehmen. Außerdem thematisiert sie Haftungs- und Absicherungsaspekte im Zusammenhang mit der PRRC-Rolle.

Zum rechtlichen Hintergrund: Hersteller und Bevollmächtigte müssen nach Artikel 15 MDR über mindestens eine für die Einhaltung der Regulierungsvorschriften verantwortliche Person verfügen. Für die sperrige Bezeichnung wird mittlerweile meist das gängige Akronym PRRC verwendet – nach der englischsprachigen Bezeichnung „Person Responsible for Regulatory Compliance“.

Hersteller von Medizinprodukten müssen nach der EU-Medizinprodukte-Verordnung (MDR) eine zuständige Person für die Einhaltung der Regulierungsvorschriften, kurz PRRC, benennen. Welche Aufgaben und Pflichten diese Expert:innen erfüllen müssen, darüber informiert der Bundesverband Medizintechnologie (BVMed) in einer neuen Broschüre mit dem Titel „Die für die Einhaltung der Regulierungsvorschriften verantwortliche Person (PRRC) gemäß Art. 15 MDR“.

Die neue BVMed-Broschüre beschreibt die wichtigsten Anforderungen hinsichtlich der Qualifikation, der Aufgaben und der Einbindung der PRRC im Unternehmen. Außerdem thematisiert sie Haftungs- und Absicherungsaspekte im Zusammenhang mit der PRRC-Rolle.

Zum rechtlichen Hintergrund: Hersteller und Bevollmächtigte müssen nach Artikel 15 MDR über mindestens eine für die Einhaltung der Regulierungsvorschriften verantwortliche Person verfügen. Für die sperrige Bezeichnung wird mittlerweile meist das gängige Akronym PRRC verwendet – nach der englischsprachigen Bezeichnung „Person Responsible for Regulatory Compliance“.

Die 22-seitige BVMed-Broschüre richtet sich an Hersteller von Medizinprodukten, an Bevollmächtigte von Herstellern außerhalb der EU sowie an Personen, die als interne oder externe PRRC für die genannten Wirtschaftsakteur:innen tätig sind. Sie soll als Orientierungshilfe zu den verschiedenen Themenbereichen, die mit der Person der PRRC verbunden sind, dienen.

Die neue BVMed-Publikation wurde von Rechtexpert:innen – unter anderem Dr. Boris Handorn von der Produktkanzlei – in Zusammenarbeit mit dem PRRC-Roundtable des BVMed erarbeitet und gibt den aktuellen Diskussionsstand zu Artikel 15 MDR wieder. Sie ersetzt keine Rechtsberatung im notwendigen Einzelfall.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

Marc Michel Foto BVMed
12.09.2023

BVMed fordert Medizintechnik-Pakt

Der Bundesverband Medizintechnologie (BVMed) unterstützt die Initiative der Länder Bayern, Baden-Württemberg, Hessen und Rheinland-Pfalz, vereint gegen Engpässe bei der Versorgung mit Medizinprodukten und Arzneimitteln vorzugehen und den Produktionsstandort Deutschland zu stärken. An dem Treffen der Gesundheits- und Wirtschaftsministerien der vier Südschienen-Länder am 11. September 2023 in München war auch der BVMed beteiligt, vertreten durch sein Vorstandsmitglied Marc D. Michel. „Es ist gut, dass die Politik im Dialog mit der Wirtschaft bleibt. Wir brauchen jetzt eine gemeinsame Kraftanstrengung, einen abgestimmten Medizintechnik-Pakt, um Produktion und Forschung unter schwierigen Rahmenbedingungen in Deutschland zu halten und zu stärken“, so Michel.

Der Bundesverband Medizintechnologie (BVMed) unterstützt die Initiative der Länder Bayern, Baden-Württemberg, Hessen und Rheinland-Pfalz, vereint gegen Engpässe bei der Versorgung mit Medizinprodukten und Arzneimitteln vorzugehen und den Produktionsstandort Deutschland zu stärken. An dem Treffen der Gesundheits- und Wirtschaftsministerien der vier Südschienen-Länder am 11. September 2023 in München war auch der BVMed beteiligt, vertreten durch sein Vorstandsmitglied Marc D. Michel. „Es ist gut, dass die Politik im Dialog mit der Wirtschaft bleibt. Wir brauchen jetzt eine gemeinsame Kraftanstrengung, einen abgestimmten Medizintechnik-Pakt, um Produktion und Forschung unter schwierigen Rahmenbedingungen in Deutschland zu halten und zu stärken“, so Michel.

Die aktuell großen Herausforderungen des Medizintechnik-Standorts seien „hausgemachte Probleme“, so der BVMed. Gründe seien unter anderem eine handwerklich schlecht gemachte EU-Medizinprodukte-Verordnung (MDR), eine überbordende Bürokratisierung und Regulierungswut, die die MedTech-KMU ersticke, eine schleppende Digitalisierung des Gesundheitssystems, eine mangelnde Datennutzung und „die unzureichende Unterstützung des Mittelstandes, dem Herzstück der deutschen Wirtschaft“, so BVMed-Vorstand Marc Michel.

„Inflationsbedingt gestiegene Produktionskosten und die MDR sind eine tödliche Kombination. Wir schwächen den Standort und verlieren Investitionen und Arbeitsplätze“, zog Michel kritisch Bilanz.

Der BVMed fordert „ganzheitliche Ansätze, eine MedTech-Strategie aus einem Guss“:

  • eine wettbewerbsfähige Regulatorik. Zu den Forderungen der Branche gehört allen voran die Abschaffung der Rezertifizierung alle fünf Jahre.
  • eine Entbürokratisierungs-Offensive, die konsequent Überregulierungen abbaut und in Brüssel für standortfreundliche Regulierungen kämpfe, um den Mittelstand als Innovationstreiber zu stützen, nicht zu ersticken
  • ein besserer Datenzugang und ein Antragsrecht beim Forschungsdatenzentrum für forschende Medizinprodukte-Unternehmen.
  • die Stärkung der Resilienz des deutschen Gesundheitssystems und der Lieferketten. Dazu gehöre eine bessere Einbeziehung der MedTech-Branche in die Erarbeitung von Lösungen, denn Resilienz erfordere eine enge Kooperation von Politik und Industrie.

Für den Standort Deutschland stehe dabei viel auf dem Spiel, denn die Medizintechnik sei Innovationstreiber, Jobmotor und Exportweltmeister.

Deutschland sei vor der MDR der Erstmarkt für neue Medizinprodukte gewesen. Das habe sich nun komplett gedreht. Die US-amerikanische Zulassungsbehörde FDA sei deutlich schneller – und dabei genauso sicher. Neue Produkte würden deshalb künftig, wenn überhaupt, bestenfalls verzögert nach Europa gelangen und den Patient:innen zur Verfügung stehen.

„Die MedTech-Industrie ist ein zentraler Baustein für die technologische Souveränität Deutschlands. Nur mit einer besseren und international wettbewerbsfähigen MDR in Kombination mit einer innovations- und produktionsorientierten Standortpolitik können wir die Versorgung mit Medizinprodukten dauerhaft sicherstellen“, so das Fazit von BVMed-Vorstand Marc Michel.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

Giorgio Calculli (c) ACIMIT
Giorgio Calculli
04.09.2023

ACIMIT: New Managing Director

Giorgio Calculli has been appointed new managing director of ACIMIT, the Association of Italian Textile Machinery Manufacturers. A law graduate with a Master’s degree in training and employment policies, he has been on staff at ACIMIT since 2006 as head of the Association’s training, internal relations and technical department. Calculli takes over as ACIMIT managing director from Federico Pellegata, who after 25 years managing the Association has been appointed CEO of ACIMIT Servizi srl, the company set up by ACIMIT to provide services in support of associated member companies for the promotion of the Italian textile machinery industry in Italy and abroad.

Giorgio Calculli has been appointed new managing director of ACIMIT, the Association of Italian Textile Machinery Manufacturers. A law graduate with a Master’s degree in training and employment policies, he has been on staff at ACIMIT since 2006 as head of the Association’s training, internal relations and technical department. Calculli takes over as ACIMIT managing director from Federico Pellegata, who after 25 years managing the Association has been appointed CEO of ACIMIT Servizi srl, the company set up by ACIMIT to provide services in support of associated member companies for the promotion of the Italian textile machinery industry in Italy and abroad.

“It has been a truly enriching experience,” asserts Federico Pellegata, “for which I am grateful to our associated members, ACIMIT’s Board, and the Association’s presidents who have served during my years in ACIMIT. However, my commitment to continue to promote the Italian textile machinery sector by no means ends here. As CEO of ACIMIT Servizi, I will continue to work relentlessly to ensure that ITMA, the world’s primary textile machinery trade fair, remains a representative showcase for the success of Italian manufacturers in the sector, as has been the case for the editions of the exhibition held in Italy in 2015 and 2023.”

ACIMIT managing director Giorgio Calculli comments: “I wish to thank the Board of ACIMIT for the appointment and for the opportunity to lend continuity to the work carried out by Federico Pellegata, for whom the success enjoyed at the latest edition of ITMA is only the most evident expression. I will work to further develop the membership base and ensure member companies receive maximum support from the Association in their business activities.”

More information:
ACIMIT Giorgio Calculli
Source:

ACIMIT

Nachhaltigkeits-Kodex BVMed | Bundesverband Medizintechnologie e.V.
25.08.2023

BVMed: Muster-Kodex Nachhaltigkeit für MedTech-Unternehmen

Der Bundesverband Medizintechnologie (BVMed) hat für seine Branche einen Muster-Kodex Nachhaltigkeit veröffentlicht, der die wesentlichen Aspekte für nachhaltiges Handeln von Medizintechnik-Unternehmen zusammenfasst.

Mit diesem Muster-Kodex möchte der BVMed zu einem einheitlichen Branchenstandard beitragen. Er bietet MedTech-Unternehmen Orientierung in Nachhaltigkeitsfragen sowie die Möglichkeit, gegenüber Geschäftspartnern das eigene Nachhaltigkeitsverständnis zu verdeutlichen. Dabei geht der Muster-Kodex auf die drei Säulen der Nachhaltigkeit (sozial, ökologisch, ökonomisch) ein, bildet das dort geltende Recht ab und legt es einheitlich aus.

Übersicht der Inhalte des Muster-Kodex:

Der Bundesverband Medizintechnologie (BVMed) hat für seine Branche einen Muster-Kodex Nachhaltigkeit veröffentlicht, der die wesentlichen Aspekte für nachhaltiges Handeln von Medizintechnik-Unternehmen zusammenfasst.

Mit diesem Muster-Kodex möchte der BVMed zu einem einheitlichen Branchenstandard beitragen. Er bietet MedTech-Unternehmen Orientierung in Nachhaltigkeitsfragen sowie die Möglichkeit, gegenüber Geschäftspartnern das eigene Nachhaltigkeitsverständnis zu verdeutlichen. Dabei geht der Muster-Kodex auf die drei Säulen der Nachhaltigkeit (sozial, ökologisch, ökonomisch) ein, bildet das dort geltende Recht ab und legt es einheitlich aus.

Übersicht der Inhalte des Muster-Kodex:

  • Soziale Nachhaltigkeit: Einhaltung von Arbeitsschutzpflichten, Förderung von Diversität und Inklusion, Diskriminierungsfreiheit, Zahlung eines angemessenen und gleichen Arbeitslohns, Koalitionsfreiheit sowie Verbot der Sklaverei, Zwangs- und Kinderarbeit.
  • Ökologische Nachhaltigkeit: Ressourcenschonung, Reduktion der CO2-Emissionen, Abfallreduktion und Recycling sowie Vermeidung von Umweltverschmutzung.
  • Ökonomische Nachhaltigkeit und Governance: Verantwortungsvolle Unternehmensführung und Strategie sowie nachhaltige und transparente Lieferketten.

Der Muster-Kodex kann freiwillig von allen Unternehmen der Medizintechnologie für sich übernommen und um individuelle Selbsterklärungen erweitert werden.

Zur Umsetzung des Muster-Kodex Nachhaltigkeit gibt der BVMed drei Grundprinzipien vor:

  • Egalitätsprinzip
    Gewährung eines unterschiedslosen Zugangs zu Medizinprodukten und damit verbundenen Gesundheitsleistungen. In Bezug auf Arbeitsbedingungen sollen vergleichbare Sachverhalte nicht ohne triftigen Grund ungleich behandelt werden.
  • Vorrangprinzip
    Vorrang einer schonenden Verwendung von Ressourcen (Reduce – Reuse – Recycle) und der Einrichtung und Befolgung effizienter Prozesse.
  • Vorsorgeprinzip
    Ergreifen von präventiven Maßnahmen, um negative ökologische und soziale Auswirkungen der wirtschaftlichen Tätigkeit zu vermeiden oder möglichst gering zu halten.

„Geschäftspartner:innen, Krankenhäuser und andere Stakeholder verlangen zunehmend von den Medizintechnik-Herstellern weitreichende Verpflichtungserklärungen zur Einhaltung des Lieferkettensorgfaltspflichtengesetzes. Mit unserem Muster-Kodex Nachhaltigkeit können die Unternehmen ihr soziales, ökologisches und ökonomisches Nachhaltigkeitsverständnis erklären“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Der neue Muster-Kodex wurde vom BVMed gemeinsam mit der Anwaltskanzlei Clifford Chance entwickelt und durch das Bundeskartellamt geprüft. Er kann unter www.bvmed.de/kodex-nachhaltigkeit heruntergeladen werden.

Bereits 2022 gab das BVMed-Institut eine Nachhaltigkeitsstudie zur Bestimmung des sozialen, ökologischen und ökonomischen Fußabdrucks der MedTech-Branche in Auftrag. Die „SEE-Impact-Study der deutschen MedTech-Branche“ des WiFOR-Instituts setzte die Grundlage für eine umfassende Nachhaltigkeitsmessung der Lieferkette und damit einen neuen wissenschaftlichen Standard. Die Studie kann unter bvmed.de/branchenstudien eingesehen werden.

 

More information:
BVMed Kodex Medizintechnik
Source:

BVMed | Bundesverband Medizintechnologie e.V.

(c) INDA
18.08.2023

INDA and the Waterloo Filtration Institute to Partner for FiltXPO™ 2023

INDA, the Association of the Nonwoven Fabrics Industry, announced that it is partnering with the Waterloo Filtration Institute (WFI) to produce the 2-day FiltXPO™ conference program, October 10-11, Chicago, Illinois. WFI brings decades of filtration experience, resources, and a worldwide network to support the education and technical development of the global filtration industry.

Filtration and separation professionals from the global supply chain will connect at FiltXPO 2023 for advancements, innovations, and business development. The conference portion of the FiltXPO event will focus on advanced filtration technologies and science for products that create a cleaner, healthier, and safer world. More details about the conference will be released at a later date.

The Nonwovens Institute (NWI) is a valued partner to INDA in bringing educational offerings to the nonwoven and engineered material industry. Behnam Pourdeyhimi, Ph.D., Professor and Executive Director, The Nonwovens Institute, and his team will teach the 2-day Filter Media Course in conjunction with FiltXPO, October 9-10, at Navy Pier in Chicago.

INDA, the Association of the Nonwoven Fabrics Industry, announced that it is partnering with the Waterloo Filtration Institute (WFI) to produce the 2-day FiltXPO™ conference program, October 10-11, Chicago, Illinois. WFI brings decades of filtration experience, resources, and a worldwide network to support the education and technical development of the global filtration industry.

Filtration and separation professionals from the global supply chain will connect at FiltXPO 2023 for advancements, innovations, and business development. The conference portion of the FiltXPO event will focus on advanced filtration technologies and science for products that create a cleaner, healthier, and safer world. More details about the conference will be released at a later date.

The Nonwovens Institute (NWI) is a valued partner to INDA in bringing educational offerings to the nonwoven and engineered material industry. Behnam Pourdeyhimi, Ph.D., Professor and Executive Director, The Nonwovens Institute, and his team will teach the 2-day Filter Media Course in conjunction with FiltXPO, October 9-10, at Navy Pier in Chicago.

Professor Pourdeyhimi and his team will share the latest insights in the development, testing, and application of nonwovens in air, aerosol, and liquid filtration. Participants will gain knowledge about the physics of filtration, how nonwoven filter media is designed and used in air, aerosol, and liquid applications, testing standards, unmet needs in filter media, and the latest market trends and intelligence.

17.08.2023

BVMed-Hygieneforum am 7. Dezember 2023

Welche sind die aktuellen Hygiene-Empfehlungen der Kommission für Krankenhaushygiene und Infektionsprävention (KRINKO) zum Umgang in der Versorgung? Wie wirken sie sich aus – praktisch, rechtlich und legislativ? Diesen Fragen widmet sich das 12. Hygieneforum des Bundesverbandes Medizintechnologie (BVMed) am 7. Dezember 2023. Weitere Themen aus dem Bereich Hygiene und Infektionsschutz werden die Nutzung von medizinischen Daten, die Bedeutung von Multiresistenten Erregern (MRE) und die Aufbereitung von Medizinprodukten sein.

Bis zu einem Drittel der nosokomialen Infektionen gilt als vermeidbar. Um dies zu erreichen, sind neben einem Bündel an Hygienemaßnahmen die Anstrengungen aller Beteiligten erforderlich. Die Empfehlungen der KRINKO sind maßgeblich bei der Prävention nosokomialer Infektionen sowie Maßnahmen der Hygiene in medizinischen Einrichtungen. Daher legt das BVMed-Hygieneforum 2023 einen besonderen Fokus auf die KRINKO-Empfehlungen und geht der Frage nach, welche Auswirkungen diese haben. Denn: Jeder Mensch hat das Recht, vor nosokomialen Infektionen geschützt zu werden.

Welche sind die aktuellen Hygiene-Empfehlungen der Kommission für Krankenhaushygiene und Infektionsprävention (KRINKO) zum Umgang in der Versorgung? Wie wirken sie sich aus – praktisch, rechtlich und legislativ? Diesen Fragen widmet sich das 12. Hygieneforum des Bundesverbandes Medizintechnologie (BVMed) am 7. Dezember 2023. Weitere Themen aus dem Bereich Hygiene und Infektionsschutz werden die Nutzung von medizinischen Daten, die Bedeutung von Multiresistenten Erregern (MRE) und die Aufbereitung von Medizinprodukten sein.

Bis zu einem Drittel der nosokomialen Infektionen gilt als vermeidbar. Um dies zu erreichen, sind neben einem Bündel an Hygienemaßnahmen die Anstrengungen aller Beteiligten erforderlich. Die Empfehlungen der KRINKO sind maßgeblich bei der Prävention nosokomialer Infektionen sowie Maßnahmen der Hygiene in medizinischen Einrichtungen. Daher legt das BVMed-Hygieneforum 2023 einen besonderen Fokus auf die KRINKO-Empfehlungen und geht der Frage nach, welche Auswirkungen diese haben. Denn: Jeder Mensch hat das Recht, vor nosokomialen Infektionen geschützt zu werden.

Referent:innen sind Prof. Dr. Mardjan Arvand vom Robert Koch-Institut, Michael Borg von der VAMED Gesundheit Holding, Prof. Dr. Christine Geffers vom Institut für Hygiene und Umweltmedizin der Charité Universitätsmedizin, Dr. Manuel Heurich von BinDoc, Dr. Tobias Weimer von Bork, Kanzlei für Medizin- Arbeits- und Strafrecht sowie Patrick Ziech vom Niedersächsischen Landesgesundheitsamt. Moderiert wird das Forum von Daniela Piossek von Paul Hartmann.

Das Forum findet vor Ort in Berlin und als Online-Konferenz statt. Die Teilnahme am Forum ist für alle am Thema Infektionsschutz Interessierten offen und kostenfrei. Die Veranstaltung ist als Fortbildung für beruflich Pflegende und Ärzt:innen anerkannt.

More information:
Hygiene
Source:

BVMed | Bundesverband Medizintechnologie e.V.

Hygienix 2023 (c) INDA
26.07.2023

INDA Opens Registration and Tabletop Reservations for Hygienix™ 2023

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration and tabletop exhibit reservations are open for the ninth edition of Hygienix™, November 13-16, New Orleans, Louisiana. More than 450 absorbent hygiene and personal care professionals from around the world will gather for four days of networking, presentations, and business opportunities.
 
The theme for this year’s Hygienix is “Shaping the Future of Absorbent Hygiene.” The event will focus on the market’s continued growth with presentations on sustainability, technology advancements, disruptive small brands, and market data and trends. Hygienix will also offer a workshop on absorbent hygiene systems led by Jim Robinson, Absorbent Hygiene Insights, LLC, Monday, November 13th. The full Hygienix program will be announced at a later date.
 
INDA is also introducing a new element for Hygienix – pre-conference webinars. Carlos Richer, Principal, Diaper Testing International, will present insights and trends in diaper design in the U.S. market and Heidi Beatty, CEO, Crown Abbey, LLC, will share her expertise in the absorbent hygiene sector.
 

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration and tabletop exhibit reservations are open for the ninth edition of Hygienix™, November 13-16, New Orleans, Louisiana. More than 450 absorbent hygiene and personal care professionals from around the world will gather for four days of networking, presentations, and business opportunities.
 
The theme for this year’s Hygienix is “Shaping the Future of Absorbent Hygiene.” The event will focus on the market’s continued growth with presentations on sustainability, technology advancements, disruptive small brands, and market data and trends. Hygienix will also offer a workshop on absorbent hygiene systems led by Jim Robinson, Absorbent Hygiene Insights, LLC, Monday, November 13th. The full Hygienix program will be announced at a later date.
 
INDA is also introducing a new element for Hygienix – pre-conference webinars. Carlos Richer, Principal, Diaper Testing International, will present insights and trends in diaper design in the U.S. market and Heidi Beatty, CEO, Crown Abbey, LLC, will share her expertise in the absorbent hygiene sector.
 
More than 50 companies will showcase their innovations and technologies during the evening tabletop exhibits and receptions. Participants will be able to discuss their needs with technical leaders and source better solutions for their products, Nov. 14-15.
 
Nominations are being accepted through August 7th for the Hygienix Innovation Award™. Three finalists will be selected to present their absorbent hygiene products on Tuesday, November 14th to hundreds of senior-level professionals. The winner of the Award will be announced at the end of the event, Thursday, November 16th.

More information:
INDA Hygienix
Source:

INDA

WOW 2023 (c) INDA Association of the Nonwoven Fabrics Industry
21.07.2023

WOW 2023 with Attendance Records

INDA, the Association of the Nonwoven Fabrics Industry, announced the successful conclusion of the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. More than 495 senior-level leaders convened for new intelligence, connections, and business, which was a record turnout for the WOW event.

The 17th edition of WOW featured almost 60 tabletop exhibits, 26 presentations, and two pre-conference webinars. The program introduced Lightning Talks, “supersized elevator speeches” covering new trends, products, and ideas, and a 1.5-day revised WIPES Academy training course. WOW also featured a mentorship program for participants new to the wipes industry.

The WOW speakers shared their expert insights in these key topics:

INDA, the Association of the Nonwoven Fabrics Industry, announced the successful conclusion of the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. More than 495 senior-level leaders convened for new intelligence, connections, and business, which was a record turnout for the WOW event.

The 17th edition of WOW featured almost 60 tabletop exhibits, 26 presentations, and two pre-conference webinars. The program introduced Lightning Talks, “supersized elevator speeches” covering new trends, products, and ideas, and a 1.5-day revised WIPES Academy training course. WOW also featured a mentorship program for participants new to the wipes industry.

The WOW speakers shared their expert insights in these key topics:

  • Inflation, Supply Chain Issues, Capacity/Demand Balance
  • Plastic Policy: Closing the Intention-Action Gap
  • Sustainability and Manufacturing Practices
  • Consumer Market Data and Trends
  • Wipes Advancements
  • Transparency in the Supply Chain
  • Regulation, Innovation, Standards & Education in Flushability

World of Wipes Innovation Award®
The winner of the World of Wipes Innovation Award was the Nonwoven Wipe Using Biotransformation Technology developed by Indorama Ventures and Polymateria. This innovative 100% polypropylene spunlace wipe utilizes advanced biotransformation technology, meeting the BSI PAS 9017 specification. The wipe is compatible with mechanical recycling however, in the event it becomes fugitive, and exposed to heat, sunlight, air and moisture, will transform into a harmless, bioavailable wax at its end-of-life, returning safely to nature without leaving behind microplastics or toxins. This polypropylene wipe represents a significant leap towards eco-friendly, sustainable nonwoven hygiene products.

INDA announced that WOW 2024 will be held June 17-20, at the Hyatt Regency Minneapolis in Minneapolis, Minnesota.

More information:
INDA WOW nonwovens
Source:

INDA Association of the Nonwoven Fabrics Industry

Dr. Christian Hauer Foto BVMed | Bundesverband Medizintechnologie e.V.
Dr. Christian Hauer
03.07.2023

Dr. Christian Hauer neues BVMed-Vorstandsmitglied

Dr. Christian Hauer von Fresenius Kabi ist seit dem 1. Juli 2023 neues Vorstandsmitglied beim Bundesverband Medizintechnologie (BVMed). Er folgt im neunköpfigen BVMed-Vorstand auf Markus Wiegmann von Stryker Deutschland, der aus dem Unternehmen ausscheiden wird.

Der promovierte Wirtschaftsingenieur Dr. Christian Hauer ist Vorstandsmitglied bei der Fresenius Kabi AG sowie Präsident Fresenius Kabi MedTech. Seine berufliche Karriere begann er in den Jahren 1998 bis 2012 bei Drägerwerk, bevor er zu Fresenius Kabi wechselte. Er war bereits von 2014 bis 2018 Mitglied im BVMed-Vorstand.

Markus Wiegmann war seit 2020 Mitglied des BVMed-Vorstands und zuletzt bei Stryker Geschäftsführer für Deutschland, Österreich, Schweiz und Polen. Der BVMed-Vorstand dankt Markus Wiegmann für sein großes Engagement und die aktive Unterstützung insbesondere in den Bereichen Digitalisierung, Endoprothetik, Robotik sowie pflegeunterstützende Technologien.

Dr. Christian Hauer von Fresenius Kabi ist seit dem 1. Juli 2023 neues Vorstandsmitglied beim Bundesverband Medizintechnologie (BVMed). Er folgt im neunköpfigen BVMed-Vorstand auf Markus Wiegmann von Stryker Deutschland, der aus dem Unternehmen ausscheiden wird.

Der promovierte Wirtschaftsingenieur Dr. Christian Hauer ist Vorstandsmitglied bei der Fresenius Kabi AG sowie Präsident Fresenius Kabi MedTech. Seine berufliche Karriere begann er in den Jahren 1998 bis 2012 bei Drägerwerk, bevor er zu Fresenius Kabi wechselte. Er war bereits von 2014 bis 2018 Mitglied im BVMed-Vorstand.

Markus Wiegmann war seit 2020 Mitglied des BVMed-Vorstands und zuletzt bei Stryker Geschäftsführer für Deutschland, Österreich, Schweiz und Polen. Der BVMed-Vorstand dankt Markus Wiegmann für sein großes Engagement und die aktive Unterstützung insbesondere in den Bereichen Digitalisierung, Endoprothetik, Robotik sowie pflegeunterstützende Technologien.

Der BVMed-Vorstand besteht aus dem Vorsitzenden Dr. Meinrad Lugan (B. Braun), den Stellvertretenden Vorstandsvorsitzenden Dorothee Stamm (Medtronic) und Dr. Manfred W. Elff (Biotronik) sowie Ben Bake (Sanitätshaus Aktuell), Kristof Boogaerts (Johnson & Johnson), Mark Jalaß (Lohmann & Rauscher), Marc D. Michel (Peter Brehm) und Ulrich Zihla (Paul Hartmann). Der BVMed-Vorstand ist bis April 2024 gewählt. Zudem ist BVMed-Geschäftsführer Dr. Marc-Pierre Möll Mitglied des Vorstands.

More information:
BVMed
Source:

BVMed | Bundesverband Medizintechnologie e.V.
 

28.06.2023

BVMed begrüßt Beratungsrecht beim G-BA für Hersteller von Verbandmittel

Der Bundesverband Medizintechnologie (BVMed) hat die gesetzliche Einführung eines Beratungsrechts beim Gemeinsamen Bundesausschuss (G-BA) für Hersteller von sonstigen Produkten zur Wundbehandlung begrüßt. Mit dem Beschluss im Rahmen des Arzneimittel-Lieferengpassbekämpfungs- und Versorgungsverbesserungsgesetzes (ALBVVG) wurde zudem die Übergangsregelung um 12 Monate verlängert. „Damit hat der Gesetzgeber noch rechtzeitig reagiert, um Verbesserungen an der neuen Verbandmittel-Erstattungsregelung vorzunehmen und Nachteile für die Versorgung von Menschen mit chronischen Wunden zu vermeiden“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Nun sei es wichtig, „dass der G-BA gemeinsam mit Ärzteschaft, Pflege und Herstellern geeignete und auf die Wundversorgung angepasste Evidenzkriterien entwickelt. Mit dem Beratungsrecht gibt es dafür nun die Grundlage.“

Der Bundesverband Medizintechnologie (BVMed) hat die gesetzliche Einführung eines Beratungsrechts beim Gemeinsamen Bundesausschuss (G-BA) für Hersteller von sonstigen Produkten zur Wundbehandlung begrüßt. Mit dem Beschluss im Rahmen des Arzneimittel-Lieferengpassbekämpfungs- und Versorgungsverbesserungsgesetzes (ALBVVG) wurde zudem die Übergangsregelung um 12 Monate verlängert. „Damit hat der Gesetzgeber noch rechtzeitig reagiert, um Verbesserungen an der neuen Verbandmittel-Erstattungsregelung vorzunehmen und Nachteile für die Versorgung von Menschen mit chronischen Wunden zu vermeiden“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Nun sei es wichtig, „dass der G-BA gemeinsam mit Ärzteschaft, Pflege und Herstellern geeignete und auf die Wundversorgung angepasste Evidenzkriterien entwickelt. Mit dem Beratungsrecht gibt es dafür nun die Grundlage.“

Hintergrund ist, das für sogenannte „sonstige Produkte zur Wundbehandlung“ künftig ein Bewertungsverfahren durchgeführt werden muss, bevor sie durch die GKV erstattet werden. Der Gemeinsame Bundesausschuss (G-BA) hat bislang jedoch keine auf die Wundversorgung angepassten Evidenzkriterien für die erstattungsrelevanten Nutzennachweise definiert. Hierzu gewährt der Gesetzgeber nun – analog zu vergleichbaren Verfahren zur Bewertung des Nutzens von Arzneimitteln nach § 35a SGB V (AMNOG) oder zur Bewertung neuer Untersuchungs- und Behandlungsmethoden nach § 137h SGB V (NUB) – betroffenen Verbandmittel-Herstellern ein Beratungsrecht zur Methodik der für die Nutzenbewertung erforderlichen Studien.

Zur Frage der Evidenzkriterien hatte der BVMed kürzlich im Umfeld des Bremer Wundkongresses eine Umfrage durchgeführt, an der sich über 250 Wundfachkräfte beteiligten. Sie zeigte auf, dass es bei den Behandlungen von 92 Prozent der Teilnehmenden zunächst um die Reduktion klinischer Infektionszeichen geht. 79 Prozent nennen die Reduktion von Wundexsudat, 76 Prozent Reduktion von Schmerzen, 70 Prozent die Verbesserung der gesundheitsbezogenen Lebensqualität der Betroffenen. Die Reduktion der Wundfläche steht bei 58 Prozent im Fokus, die Reduktion der Keimlast in der Wunde bei 55 Prozent. Nur 22 Prozent der Befragten nennen auch den kompletten Wundverschluss als Evidenzkriterium. „Wundauflagen mit antibakterieller Wirkung sind für eine phasengerechte Wundversorgung unerlässlich und müssen auch künftig für die Versorgung chronischer Wunden zur Verfügung stehen“, so BVMed-Wundexpertin Juliane Pohl.

Betroffen von der neuen Regelung ist eine Vielzahl von Produkten wie etwa silber- oder PHMB-haltige Wundauflagen, die bislang erstattungsfähig waren. Nach Einschätzung des BVMed sind rund 400 Produkte betroffen.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

23.06.2023

Program announced for RISE® 2023

The theme for the 13th edition of RISE® (Research, Innovation & Science for Engineered Fabrics) is “A New Era in Manufacturing for Sustainability.” Technology scouts, product managers, senior scientists, development engineers, and business developers will convene September 26-27 at North Carolina State University and The Nonwovens Institute in Raleigh, NC to discover the latest nonwoven innovations.

The RISE conference program features industry leaders from these companies: American Truetzschler, Berry Global, Dilo Incorporated, Evonik Corporation, Indorama Ventures USA, MANN+HUMMEL, the National Renewable Energy Laboratory, NatureWorks, The Nonwovens Institute, Owens Corning, PCI Wood Mackenzie, PolyQuest, Reifenhäuser REICOFIL GmbH, and Simplifyber. These industry experts will discuss the future of nonwoven manufacturing, advances in filter media, rPolymer developments, and sustainable applications.

The theme for the 13th edition of RISE® (Research, Innovation & Science for Engineered Fabrics) is “A New Era in Manufacturing for Sustainability.” Technology scouts, product managers, senior scientists, development engineers, and business developers will convene September 26-27 at North Carolina State University and The Nonwovens Institute in Raleigh, NC to discover the latest nonwoven innovations.

The RISE conference program features industry leaders from these companies: American Truetzschler, Berry Global, Dilo Incorporated, Evonik Corporation, Indorama Ventures USA, MANN+HUMMEL, the National Renewable Energy Laboratory, NatureWorks, The Nonwovens Institute, Owens Corning, PCI Wood Mackenzie, PolyQuest, Reifenhäuser REICOFIL GmbH, and Simplifyber. These industry experts will discuss the future of nonwoven manufacturing, advances in filter media, rPolymer developments, and sustainable applications.

Innovations that advance the nonwovens industry will be recognized with the 2023 RISE® Innovation Award. Three finalists will present their innovative products or technologies to RISE participants, Tuesday, September 26th. The 2022 award winner was DiaperRecycle, cat litter made from recycled diapers.

RISE participants have the option of touring The Nonwovens Institute’s $65 million-plus, 60,000 square-foot facilities featuring state-of-the-art equipment, pilot lines, and analytical laboratories, as well as attending an evening reception at the Lonnie Pool Golf Course Clubhouse. During the evening reception, graduate students and faculty from North Carolina State University will feature their research and technical advances with poster presentations. The tour and reception will take place Tuesday, September 26th and the tour is limited to 40 attendees.

Source:

INDA

23.06.2023

INDA receives United Nations Accreditation

INDA, the Association of the Nonwoven Fabrics Industry, was granted status last month as an accredited stakeholder with the United Nations Environment Programme (UNEP), which, among other privileges, will allow representatives from the association to observe the formal ongoing negotiations of the UN Global Plastics Treaty. INDA Government Affairs Director Wes Fisher was on site at the second session of the treaty negotiations formally titled the “second session of the Intergovernmental Negotiating Committee to develop an international legally binding instrument on plastic pollution, including in the marine environment.” The negotiations took place from 29 May to 2 June 2023 at the United Nations Educational, Scientific and Cultural Organization (UNESCO) Headquarters in Paris, France.

“We are excited to continue to enhance the capacity of INDA’s government affairs department to better serve the industry on a global scale,” stated Fisher. “We look forward to working with the UNEP to provide technical input regarding ongoing plastics treaty issues specific to the nonwovens industry, and engaging with other UN processes with our new status as an accredited stakeholder.”

INDA, the Association of the Nonwoven Fabrics Industry, was granted status last month as an accredited stakeholder with the United Nations Environment Programme (UNEP), which, among other privileges, will allow representatives from the association to observe the formal ongoing negotiations of the UN Global Plastics Treaty. INDA Government Affairs Director Wes Fisher was on site at the second session of the treaty negotiations formally titled the “second session of the Intergovernmental Negotiating Committee to develop an international legally binding instrument on plastic pollution, including in the marine environment.” The negotiations took place from 29 May to 2 June 2023 at the United Nations Educational, Scientific and Cultural Organization (UNESCO) Headquarters in Paris, France.

“We are excited to continue to enhance the capacity of INDA’s government affairs department to better serve the industry on a global scale,” stated Fisher. “We look forward to working with the UNEP to provide technical input regarding ongoing plastics treaty issues specific to the nonwovens industry, and engaging with other UN processes with our new status as an accredited stakeholder.”

Accreditation provides non-governmental organizations with observer status to the United Nations Environment Assembly, UNEP, and its subsidiaries. Accreditation will bring many advantages to INDA with respect to participation in the work of UNEP’s Governing Bodies, such as the United Nations Environment Assembly of UNEP and the Committee of Permanent Representatives.

UN Global Plastics Treaty negotiations have garnered significant attention from both industry and environmental groups. At least three more negotiation sessions are expected with the goal of finalizing a treaty by the end of 2024.

(c) Messe Düsseldorf GmbH
19.06.2023

A+A Expert Talk: Focus on sustainability and the circular economy

  • The A+A Expert Talks head into their third round

On 20 June 2023 between 10.00 am and 11.30 am experts from the fields of sustainability, circular economy, environmental protection as well as corporate fashion and product management will be presenting lectures and discussing the topics of sustainability in supply chains, standardisation and quality seals as well as the associated challenges and solutions in cooperation with German Fashion. They will thereby provide a platform for the exchange of knowledge, experience and innovative approaches.

The focus on sustainability and the circular economy reflects the growing relevance of these topics in the world of work. More and more companies recognise the need to make their business practices more sustainable and optimise the use of resources.

This Expert Talk will be presented by Irina Olm, In-House Lawyer & Counsel of GermanFashion Modeverband Deutschland e.V. and Expert for Circular Economy and CSR, who will contribute her know-how on the European level.  

  • The A+A Expert Talks head into their third round

On 20 June 2023 between 10.00 am and 11.30 am experts from the fields of sustainability, circular economy, environmental protection as well as corporate fashion and product management will be presenting lectures and discussing the topics of sustainability in supply chains, standardisation and quality seals as well as the associated challenges and solutions in cooperation with German Fashion. They will thereby provide a platform for the exchange of knowledge, experience and innovative approaches.

The focus on sustainability and the circular economy reflects the growing relevance of these topics in the world of work. More and more companies recognise the need to make their business practices more sustainable and optimise the use of resources.

This Expert Talk will be presented by Irina Olm, In-House Lawyer & Counsel of GermanFashion Modeverband Deutschland e.V. and Expert for Circular Economy and CSR, who will contribute her know-how on the European level.  

Benjamin Helfritz, Head of Quality in Digital and Green Transformation, DIN – German Institute for Standardisation, will introduce participants to the new standards for the Green Transition.  
The Digital Product Passport (DPP) is needed for both the green and digital transition. However, it will only achieve its full added value if interoperability is ensured between existing and emerging systems. The use of the DPP promotes more sustainability and digital progress.

Henk Vanhoutte, Secretary General, European Safety Federation (ESF) and Lucia Mendori, Regulatory Affairs Associate / Chair ESF Working Group Sustainability will present practical examples and concrete application factors for sustainable PPE as well as solutions for sustainable jobwear. They will provide an overview of survey results from their members regarding various sustainability aspects – pointing to how the industry is treating this important topic but also flagging up the limits to the sustainability of PPE.

Lena Bay Høyland, Product Director of the Swedish workwear manufacturer Fristads Kansas will share the sustainability strategy of her company which has committed to minimise its environmental impact by targets and effective measures. The progress made by Fristads Kansas was measured using concrete figures and audits. This is a use case highlighting the innovations and challenges associated with sustainable jobwear.

By organising the Expert Talks the leading international trade fair A+A jointly with its strategic partners from the German Federal Association for Occupational Safety and Health (Basi), Fraunhofer IPA, German Fashion (Modeverband Deutschland e.V.), DGUV (Germany Statutory Accident Insurance), BAuA (Federal Agency for Occupational Safety and Health), BMAS (Ministry of Labour and Social Affairs), IVPS Interessenverbund Persönliche Schutzausrüstung e.V. (PPE Stakeholder Association) as well as IFA (Institute for Occupational Safety) will provide its community with a networking and information platform.

(c) INDA
16.06.2023

Registration for FiltXPO™ 2023 is now open

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.

Source:

INDA, Association of the Nonwoven Fabrics Industry

13.06.2023

Three Finalists Announced for the 2023 World of Wipes Innovation Award®


2XL Corporation, Avgol Nonwovens, and Yowel to compete for Award
INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the World of Wipes Innovation Award®. The Award will be presented at the 17th annual World of Wipes® (WOW) International Conference, July 17-20, at the Atlanta Marriott Marquis in Atlanta, Georgia.    

The three products vying for this Award are a cleaning and disinfecting device from 2XL Corporation, a wipe utilizing biotransformation technology from Avgol Nonwovens, and a reusable towel dispensing system from Yowel.

The winner will be announced on July 20th at 11 am. The three companies competing for the Award are:


2XL Corporation, Avgol Nonwovens, and Yowel to compete for Award
INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the World of Wipes Innovation Award®. The Award will be presented at the 17th annual World of Wipes® (WOW) International Conference, July 17-20, at the Atlanta Marriott Marquis in Atlanta, Georgia.    

The three products vying for this Award are a cleaning and disinfecting device from 2XL Corporation, a wipe utilizing biotransformation technology from Avgol Nonwovens, and a reusable towel dispensing system from Yowel.

The winner will be announced on July 20th at 11 am. The three companies competing for the Award are:

Windup by 2XL Corporation
Meet the Windup: a groundbreaking new device that can clean and disinfect your home using a self-advancing microfiber roll that you never have to touch. Just one roll will clean your kitchen over 50 times. An innovative one-touch revolving roll and a versatile spray system that allows use of your favorite floor cleaner or our specially formulated disinfecting solution. No more stopping to change expensive pads or change filthy water. Get wound up for Windup.

Nonwoven wipe using biotransformation technology by Avgol Nonwovens
This innovative spunlace wipe utilized advanced biotransformation technology developed jointly by Indorama Ventures and Polymateria. Meeting the BSI PAS 9017 specification, this wipe in the event it becomes fugitive, and exposed to heat, sunlight, air and moisture will transform into a harmless, bioavailable wax at its end-of-life, eliminating microplastic pollution. Compatible with mechanical recycling and combatting ‘fugitive’ waste, this wipe represents a significant leap towards eco-friendly, sustainable nonwoven hygiene products.

The Yowel™ System by Yowel
Ready to help the earth and save money…every day? Yowel is a patented system for dispensing reusable towels. Instead of a roll of paper towels, place a Yowel full of reusable towels into your paper towel holder – or choose the countertop model, and you’re immediately reducing your paper towel consumption.  The Yowel System has 40 reusable towels and a mesh bag for used towels. Save money and help Mother Nature.

INDA’s Technical Advisory Board selected the finalists based on the creativity, uniqueness, and technical sophistication employed in finding novel ways to expand the utilization of nonwovens. Categories considered for the award were wipes related raw materials, roll goods, converting, packaging, active ingredients, binders, additives, and end-use products.

Nice-Pak’s SecureFLUSH® Technology Flushable Wipes received the 2022 World of Wipes Innovation Award for their unique, 100% cellulose nonwoven that is strong enough to clean, yet break apart rapidly, when flushed. A specialty “lock and key” design of plant-based fibers and formula leverages patent-pending technology to break apart five times faster than the leading brand of two-ply toilet paper and ensure responsible care of plumbing and wastewater. SecureFLUSH® Technology Flushable wipes are available in Walmart, Amazon, and at Nicencleanwipes.com.

More information:
INDA WOW nonwovens World of Wipes
Source:

INDA

01.06.2023

Euratex criticizes European Parliament: No balance between sustainability and competitiveness

June 1, the European Parliament has adopted its Report on an EU Strategy for Sustainable and Circular Textiles. The Report wants to step up the EU’s ambition towards sustainability and circularity even further, but it has failed to recognise the strategic role of the European textile industry to scale up sustainability, nor to appreciate the global competitive threat which our companies are facing.

Director General Dirk Vantyghem commented on the MEP Report: “We welcome the strong interest of the European Parliament in the textile and fashion industry, but encourage MEPs to develop a balanced vision which reconciles sustainability and competitiveness. Developing a new business model for our industry requires carefully crafted legislation at global level, and an open dialogue between the industry, the brands and the consumer.”

June 1, the European Parliament has adopted its Report on an EU Strategy for Sustainable and Circular Textiles. The Report wants to step up the EU’s ambition towards sustainability and circularity even further, but it has failed to recognise the strategic role of the European textile industry to scale up sustainability, nor to appreciate the global competitive threat which our companies are facing.

Director General Dirk Vantyghem commented on the MEP Report: “We welcome the strong interest of the European Parliament in the textile and fashion industry, but encourage MEPs to develop a balanced vision which reconciles sustainability and competitiveness. Developing a new business model for our industry requires carefully crafted legislation at global level, and an open dialogue between the industry, the brands and the consumer.”

EURATEX supports the EU Textile Strategy, as it was presented over a year ago by the European Commission. The 160.000 European textile companies are committed to invest in sustainability, develop new circular business models and produce high quality textile products – not just in fashion, but also in home and medical textiles, construction, agriculture or cars. To do so, indeed a new regulatory framework is needed, with clear definitions, coherent rules and effective controls. But also, the companies should be able to comply with these rules and remain globally competitive.

The EP Report has failed to respect that balance between sustainability and competitiveness. Instead, it suggests even more rules and restrictions, totally disregarding the current economic challenges caused by high energy prices, loss in consumer confidence and assertive trade partners. Putting the bar even higher will simply mean that the European textile industry will be pushed out of the market, resulting in a bigger environmental footprint and increased dependency on foreign supplies. Quite the opposite of what the EU wants to achieve with its open strategic autonomy plans.

The Report also fails to differentiate between textile products. There is a mix up between fashion and technical textiles, between products made in Europe and outside, between high quality and durable products and low-quality items. It is regretful that the European Parliament did not make that distinction and simply refers to “textiles” as a general cause of concern, without acknowledging e.g. the high quality products, made by European textile and fashion companies.

The Report puts a strong responsibility on the supply side – the industry and the brands – and does not sufficiently address the role of the consumer. Initiatives therefore are essential to create a stronger demand for sustainable textiles, which includes better communication and transparency (avoid greenwashing), fiscal measures, green public procurement and better control of online marketplaces.

On a positive note, the EP Report does recognise the importance to invest in research and innovation, to support reskilling and upskilling, the need of scaling up circular economy and pay attention to the needs of SMEs. EURATEX has always insisted that such massive transition can only be successful if accompanied by significant and dedicated support programmes. The EU Textiles Transition Pathway should offer a clear perspective in this regard.

Source:

Euratex

25.05.2023

INDA releases new North American Nonwoven Materials Annual Study

INDA, the Association of the Nonwovens Fabrics Industry, announces the publication of a new study, North American Nonwoven Materials Annual Study 2022.

Based on actual surveys and interviews with producers, enhancing the accuracy and relevance, this study tracks machine additions, closures, and productivity improvements. This study is the industry benchmark for capacity and production information for North America and the only publication that provides an estimate of operating rates, based on nameplate machine capacity, through the year 2022. The 72-page study contains 43 figures and 11 tables.

“An element of INDA’s mission is to provide credible statistics to the nonwovens and engineered materials industry,” said Tony Fragnito, INDA President. “Our objective is to continually improve the quality of data and industry information. We feel the industry will greatly benefit from this in-depth resource for strategic planning and investment purposes,” Fragnito added.

INDA, the Association of the Nonwovens Fabrics Industry, announces the publication of a new study, North American Nonwoven Materials Annual Study 2022.

Based on actual surveys and interviews with producers, enhancing the accuracy and relevance, this study tracks machine additions, closures, and productivity improvements. This study is the industry benchmark for capacity and production information for North America and the only publication that provides an estimate of operating rates, based on nameplate machine capacity, through the year 2022. The 72-page study contains 43 figures and 11 tables.

“An element of INDA’s mission is to provide credible statistics to the nonwovens and engineered materials industry,” said Tony Fragnito, INDA President. “Our objective is to continually improve the quality of data and industry information. We feel the industry will greatly benefit from this in-depth resource for strategic planning and investment purposes,” Fragnito added.

The complete study is provided to producers who supplied key metrics. The Executive Summary, an overview of the findings and implications, will be offered to current INDA members on a complimentary basis.

The detailed study is available for purchase, with members receiving a discount.

Findings from this year’s study include:

  • North American capacity continues to increase with investments being made across all the processes and for a variety of end-uses. The industry’s nameplate capacity utilization has increased year-over-year, for the fifth consecutive year.
  • In 2022, capacity of nonwovens in North America reached 5.565 million tonnes, an increase from the previous year of 2.4% (net growth of 128,700 tonnes) and an improvement over the previous year’s growth rate of 1.8%.
  • North American imports, in tonnage, decreased 24.3% in 2022 and exports decreased 16.3% due to market stabilization after COVID. Nonwoven production tends to stay within the region, so the net trade balance (imports less exports) accounted for less than 5.5% of the region’s capacity.

“2022 was a period of economic adjustment and stabilization,” said Mark Snider, Chief Market & Industry Analyst. “We’re seeing a controlled and consistent transition back to pre-pandemic levels of nonwoven growth.”

More information:
INDA nonwovens study
Source:

INDA, Association of the Nonwovens Fabrics Industry

(c) BVMed
24.05.2023

BVMed: 5-Punkte-Plan zum Medizintechnik-Standort Deutschland

Der Bundesverband Medizintechnologie (BVMed) fordert in einem 5-Punkte-Plan Maßnahmen für die im Koalitionsvertrag vorgesehene Stärkung des Medizintechnik-Standorts Deutschlands. Zu den Forderungen des deutschen Medizintechnik-Verbandes gehören eine beauftragte Person der Bundesregierung für die industrielle Gesundheitswirtschaft, eine Stärkung der Resilienz und der Lieferketten, ein Belastungsmoratorium und Entbürokratisierungs-Offensive für die KMU-geprägte Branche, Fast-Track-Verfahren für Innovationen mit klaren Fristen sowie einfache Anerkennungsverfahren für benötigte Fachkräfte.

Der Bundesverband Medizintechnologie (BVMed) fordert in einem 5-Punkte-Plan Maßnahmen für die im Koalitionsvertrag vorgesehene Stärkung des Medizintechnik-Standorts Deutschlands. Zu den Forderungen des deutschen Medizintechnik-Verbandes gehören eine beauftragte Person der Bundesregierung für die industrielle Gesundheitswirtschaft, eine Stärkung der Resilienz und der Lieferketten, ein Belastungsmoratorium und Entbürokratisierungs-Offensive für die KMU-geprägte Branche, Fast-Track-Verfahren für Innovationen mit klaren Fristen sowie einfache Anerkennungsverfahren für benötigte Fachkräfte.

Der BVMed-Vorstandsvorsitzende Dr. Meinrad Lugan bezeichnete die Medizintechnik-Branche als „Aushängeschild für die deutsche Wirtschaft“: „Wir sind Innovationstreiber. Wir sind Jobmotor. Wir haben Hidden Champions und sind Exportweltmeister. Wir haben 93 Prozent Mittelstand. Für Deutschland steht viel auf dem Spiel. Denn: Der Medizintechnik-Standort Deutschland ist stark gefährdet.“ Das liege neben den massiv gestiegenen Kosten für Energie, Rohstoffe und Logistik sowie Inflation und steigende Löhne vor allem an „hausgemachten Problemen“: Sehr kompliziertes regulatorisches System für Medizinprodukte, überbordende Bürokratisierung und Regulierungswut sowie schleppende Digitalisierung im Gesundheitssystem und mangelnde Datennutzung. „Wir senden damit keine Signale für einen innovationsfreundlichen Standort aus“, so Lugan. Er fordert: „Um Top-Talente im Land zu halten und Innovationen hier zu entwickeln, brauchen wir bessere Rahmenbedingungen!“.

Der 5-Punkte-Plan des BVMed sieht unter anderem vor:

1. Beauftragte Person der Bundesregierung für die industrielle Gesundheitswirtschaft
Für eine gut koordinierte MedTech-Branchenstrategie „aus einem Guss“, muss die ressortübergreifende Zusammenarbeit verbessert werden. Der BVMed fordert daher die Benennung einer beauftragten Person der Bundesregierung für die industrielle Gesundheitswirtschaft sowie die Stärkung der Abteilung Gesundheitswirtschaft im Bundeswirtschaftsministerium.

2. Resilienz und Lieferketten stärken
Der BVMed spricht sich für einen „systemischen und strategischen Ansatz“ aus, um die Resilienz des deutschen Gesundheitssystems und die Lieferketten zu stärken. Dazu gehören eine bessere Einbeziehung der MedTech-Branche in die Erarbeitung von Lösungen, die Unterstützung des Aufbaus von Produktionskapazitäten in Deutschland in Produktbereichen, in denen eine strategische Unabhängigkeit erreicht werden soll, sowie die Einrichtung einer digitalen Bestandsplattform versorgungskritischer Medizinprodukte, um Transparenz in Echtzeit zu erreichen.

3. Belastungsmoratorium und Entbürokratisierungs-Offensive
Der BVMed fordert eine Entbürokratisierungs-Offensive, die den deutschen Mittelstand im Blick hat, konsequent Überregulierungen abbaut sowie in Brüssel für standortfreundliche Regulierungen kämpft. Dazu gehört, dass die Verantwortung für Lieferketten auf die unmittelbaren Zulieferer beschränkt bleibt. Der BVMed fordert zudem einen einheitlichen ermäßigten Mehrwertsteuersatz auf Medizinprodukte sowie mehr Geschwindigkeit und bessere Förderung von klinischen Studien. Wichtig seien zudem adäquate Mechanismen, die die ambulante Hilfsmittelversorgung auch im derzeitig starren Vertragskonstrukt sicherstellt.

4. Fast-Track für Innovationen mit klaren Fristen
Der BVMed setzt sich für flexiblere und schnellere Bewertungsverfahren mit klaren Fristenregelungen beim Gemeinsamen Bundesausschuss (G-BA) und beim Bewertungsausschuss ein. Forschende Medizinprodukte-Unternehmen benötigen zudem einen besseren Datenzugang und ein Antragsrecht beim Forschungsdatenzentrum. Außerdem sollte sich Deutschland dafür einsetzen, dass die EU-Medizinprodukte-Verordnung (MDR) strategisch weiterentwickelt wird und „mehr Berechenbarkeit und Schnelligkeit“ beim Marktzugang von Medizinprodukten bietet. So spricht sich der BVMed unter anderem für Fast-Track-Verfahren für innovative Medizinprodukte aus, die den Stand der Technik erheblich verbessern oder einen bislang ungedeckten medizinischen Bedarf betreffen. Hier gebe es bereits etablierte Regelungen zu FDA-Programmen oder Arzneimittel-Verfahren.

5. Fachkräfte gewinnen
Um dringend benötigte internationale Fachkräfte für die Medizintechnik-Branche zu gewinnen, fordert der BVMed einfache Anerkennungsverfahren, Integrationsangebote und Internationalisierung der Verwaltungsverfahren. Außerdem sollten die Arbeitsbedingungen insbesondere in der Pflege verbessert werden, beispielsweise durch den geförderten Einsatz von digitalen Lösungen und pflegeunterstützenden Technologien.

Source:

BVMed | Bundesverband Medizintechnologie e.V.

(c) ACIMIT
22.05.2023

Italian Textile Machinery: Drop in orders for 2023 first quarter

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

However, this uncertainty does not appear to affect the sector’s operators, who are nonetheless permeated by a sense of optimism, as is also testified by the positive data drawn from a comparison with orders from the previous quarter (October-December 2022), for which total orders had been slightly on the rise at +3%. Indeed, the president of ACIMIT confirms that, “Manufacturers in our sector don’t lack for work, having filled up on orders last year and are now busy fulfilling them. The forecasts for 2023 remain positive”. Zucchi concluded, “I expect this confirmation of a healthy manufacturing sector to come from ITMA Milan, the world’s premier trade show dedicated to textile and clothing technologies, slated to open on June 8th at the Rho Fiera exhibition spaces. The exhibit will feature over 400 Italian manufacturers, taking up approximately 30% of the entire exhibition space. This figure is in itself a result that confirms the leadership role of Italy’s textile machinery manufacturers”.

(c) BVMed
10.05.2023

BVMed startet neue Medizintechnik-Branchenkampagne

Der Bundesverband Medizintechnologie (BVMed) hat eine neue Imagekampagne gestartet, um die Faszination und die Bedeutung der Medizintechnik-Branche insbesondere gegenüber der Wirtschafts- und Forschungspolitik zu verdeutlichen. „Wir sind Wirtschaftsmotor und Lösungsanbieter für die Herausforderungen der Zukunft – und möchten das auch weiterhin bleiben. Die Medizintechnik verdient und benötigt mehr Aufmerksamkeit in der Diskussion um den Wirtschaftsstandort Deutschland. Als Branchenverband sind wir ihre starke Stimme“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Neben einer deutlichen wirtschafts- und forschungspolitischen Ausrichtung will der BVMed mit der Branchenkampagne auch den technologie-affinen Nachwuchs für die Medizintechnik begeistern. „Die Kampagne wirbt mit inspirierenden Geschichten von Forscherinnen und Forschern für ausgezeichnete berufliche Perspektiven in einer spannenden Branche“, so die BVMed- Kommunikationsexperten Manfred Beeres und Michelle Klee. All das fasst der Claim der Kampagne zusammen: „Gesundheit hat Zukunft. Die Medizintechnik.“

Der Bundesverband Medizintechnologie (BVMed) hat eine neue Imagekampagne gestartet, um die Faszination und die Bedeutung der Medizintechnik-Branche insbesondere gegenüber der Wirtschafts- und Forschungspolitik zu verdeutlichen. „Wir sind Wirtschaftsmotor und Lösungsanbieter für die Herausforderungen der Zukunft – und möchten das auch weiterhin bleiben. Die Medizintechnik verdient und benötigt mehr Aufmerksamkeit in der Diskussion um den Wirtschaftsstandort Deutschland. Als Branchenverband sind wir ihre starke Stimme“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Neben einer deutlichen wirtschafts- und forschungspolitischen Ausrichtung will der BVMed mit der Branchenkampagne auch den technologie-affinen Nachwuchs für die Medizintechnik begeistern. „Die Kampagne wirbt mit inspirierenden Geschichten von Forscherinnen und Forschern für ausgezeichnete berufliche Perspektiven in einer spannenden Branche“, so die BVMed- Kommunikationsexperten Manfred Beeres und Michelle Klee. All das fasst der Claim der Kampagne zusammen: „Gesundheit hat Zukunft. Die Medizintechnik.“

Die Branchenkampagne enthält unter anderem folgende Elemente:

  • Ein Branchenfilm, der die Bedeutung und die Faszination von MedTech aufzeigt.
  • Fünf Motive, die Beispiele für Medizintechnik als Innovationstreiber, Lösungsanbieter und hohe Ingenieurskunst aufzeigen.
  • Zentrale „Facts & Figures“, die die Bedeutung der Branche hervorheben.
  • Forscher:innen-Geschichten, die zeigen, was und wer hinter einer Innovation steckt.
  • Verschiedene Online-Anzeigenformate in relevanten Medien.
  • Eine begleitende Social Media-Kampagne mit Mitmachaktionen für die MedTech-Branche unter dem Hashtag #MedTechGermany.

Der Film sowie alle Motive und Geschichten können auf der Kampagnen-Webseite abgerufen werden.

Source:

BVMed | Bundesverband Medizintechnologie e.V.