From the Sector

• Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
• With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

• "Even closer to our customers"

After more than eight years in the Intercontinental Business Center on Yutong Road in Shanghai, China, the Manmade Fibers segment has now opened a new sales and service office in the metropolis of millions near the international airport in Hongqiao and the National Exhibition and Convention Center (NECC).

The Manmade Fibers segment in China now officially operates under the following address:

Oerlikon (China) Technology Co. Ltd.
Shanghai Branch
RM1208-1210, Tower A, The Place,
100 Zunyi Road, Changning District
Shanghai China 200051

The main reason for the change from Yutong Road to the new address on Zunyi Road was the logistical aspects in a city that has had to cope with increasingly heavy traffic in recent years. "Now we are even closer to our customers," explains Wang Jun, Oerlikon China President. The proximity to Hongqiao airport and the Hongqiao railway station with its high-speed trains will provide the sales and service staff with even better infrastructure connections.

Furthermore, the local repositioning also takes into account the changes within the Oerlikon Group. "The divestments made within the Oerlikon Group in recent years have now led to a reorganization here in Shanghai. Today, Oerlikon's business activities in China focus exclusively on the segments Manmade Fibers and Surface Solutions incl. Additive Manufacturing. The time had come to set up the best possible infrastructure for optimum customer service for both business segments," continues Wang Jun. In addition, in the age of digitalization, sales and service employees in China are increasingly able to work from home. All of this has now led to a changed, adapted and, last but not least, cost-optimized reorganization.

• Digital processes also speed up the manufacture of meltblown systems

in order to further optimize the material provision for the Oerlikon Neumag and Oerlikon Nonwoven business units and to strengthen internal processes at the German site in Neumünster, the Manmade Fibers segment of the Swiss Oerlikon Group decided last year to invest in a state-of-the-art logistics center with a new lift center. It has already been fully operational for a few weeks. This is tremendously helpful for speeding up the processing of the numerous orders for meltblown systems for manufacturing high-quality nonwovens for protective masks and apparel that Oerlikon Nonwoven has received over the past months alone

Investing in a new Oerlikon Neumag and Oerlikon Nonwoven logistics center is paying dividends: the processing speed when manufacturing new systems – very much to the benefit of customers – considerably improved in the first week after the center started operating, not least as a result of the optimized processes and the material handling. After 25 years, the time had finally come to break new ground and to better equip ourselves for the future requirements of the markets. The paternoster storage facility to date not only needed to have regular repairs carried out due to its age, it was also too small for the projects increasingly being carried out today. The only 90 m² were capable of storing around 12,000 parts. In contrast, the new logistics center now offers more than 250 m² of storage space for in excess of 25,000 parts. As a result, this now also houses all small parts, which used to be stored in the high-rack facility due to lack of space.

New hardware, new software
Coinciding with the opening of the new logistics center, Oerlikon also introduced new digital processes that will also help cope with the increasing production volumes. To this end, consistently maintained master data and photos for all parts ensure safe, paper-free storage and handling of the material from now on. In order to minimize mistakes, a laser pointer now indicates from which or to which space the goods are moved. Furthermore, a photo of the material, sorted to type, is displayed on the screen. The digitalization of the warehousing facilities secures the pick and put-away process so that checking material numbers becomes superfluous when removing items from the warehouse.

Modernized press eases digital printing conversion, signals new era for PCMC and RDP Marathon

Paper Converting Machine Company (PCMC)—part of the Barry-Wehmiller Converting Solutions Platform announced the recent installation of the new Signature Series (380V-s) wide-web, high-speed offset  press at J.J. Collins Printers in Charleston, Illinois.
The 380V-s is the first in the series that is replacing the 380V press series, long highly regarded by printers in the longrun documents and high-end promotional graphics markets. The new design incorporates the latest in internet connectivity and touchscreen technology, and allows for easy integration with full or hybrid digital printing.
Designed by RDP Marathon, a recent acquisition of PCMC, the 380V-s represents PCMC’s expansion into providing equipment and services to the offset printing industry. Backed by PCMC’s global sales, manufacturing and service support, RDP Marathon will continue to maintain a sharp  focus on innovation. J.J. Collins Printers—already using an RDP Marathon model 260P blanket-to-blanket, heat-set press for its high-end commercial products—has been providing innovative print solutions  since 1878. Its commitment to using state-of-theart pre-press, press and bindery equipment has ensured the company's position as a leader in the print manufacturing industry.
In addition to the 380V-s, PCMC continues to develop new technologies and applications for a variety of print markets.

 The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with digital B2B marketplace, JOOR, there is still a guaranteed trading option.

Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July.  Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.

• The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with the leading global digital B2B marketplace, JOOR, there is still a guaranteed trading option.

Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July. Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.
     
A statement from Anita Tillmann, Managing Partner of the PREMIUM GROUP: 

“We greatly regret the decision of course, especially after the success of our January events. The ban on large-scale events has been around for some time and has been publicly discussed. It hurts us to do it, but we are also conscious of our responsibility. If cancelling our trade shows, conferences and parties contributes to the safety of our customers and visitors, then we have to take this step.
 
We are in close contact with all our brands and partners and have spent the last four weeks discussing possible approaches, concepts and new focal topics for the summer. The bottom line is that digitalisation is clearly the focus. It’s all about using the time over the next few months sensibly. The timing for brands and retailers is now right – all market participants are aware of the necessity of this.

We have been working closely with JOOR, the leading B2B marketplace globally, for around a year, after successfully integrating our own digital platform, Veee.com. JOOR has digitalised the entire procurement process and ensures a seamless, functioning wholesale process on an international scale – both for brands and retailers.
 
We shall shortly be offering webinars on this and can offer our customers an optimal, digital ordering solution so as to use this time of the pandemic efficiently. We are very happy with this option and our year-long investment in the topic of digitalisation. This has come good for us now.
 
Our trade show formats have been about more than just ordering for a long time now. They are about encounters, emotion, inspiration, communication and, finally, the fashion community getting together. Although lots can take place digitally nowadays, it doesn't replace physically meeting up in person. We have seen this more than ever in the present situation.
 
We are going to work on new concepts for 2021, and we will liaise with the key stakeholders in Berlin and with all others too to ensure we hit the ground running again. We’re taking on the challenge and will come back to the industry when we have news.”

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.

Netherlands-based operation expands on-demand garment decoration capabilities

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announces Netherlands-based Simian, an online total print provider to more than half a million businesses and end-consumers, is implementing the Kornit Atlas digital direct-to-garment (DTG) system to increase its capacity for delivering sustainable, retail-ready decorated apparel on demand. Simian is the parent company of online print providing sites Reclameland, Drukland, and Flyerzone.

Having established itself as a total print solutions provider for signage, banners, posters, flags, and other digitally printed textiles, Simian first entered the decorated apparel market by implementing two entry-level, single-pallet DTG systems. Kornit Atlas, which can imprint more than a thousand garments per day with a single operator, will enable them to increase capacity to accommodate ongoing growth in this line of business.
Offering lower total cost of ownership than other DTG systems, Atlas meets the retail quality, wash and light fastness, and sustainability standards of the world’s largest apparel brands. Simian will use the system for nontoxic decoration of baby apparel and accessories, in addition to t-shirts, polos, sweaters, vests, and tote bags.

Captivating colours, optimum cost efficiency and a sustainable value chain: these are some of the typical features of Sappi’s Inkjet and Dye Sublimation Papers. The global manufacturer will showcase its diverse, high-quality product ranges at FESPA Madrid, in hall 3, stand D30.

• Transjet Drive dye sublimation paper tailored to industrial printing machines with a glue-belt system
• Scrolljet, a large inkjet paper, with impressively razor-sharp lines
• Digitally printed corrugated board with Fusion Topliner for consumer goods packing and displays

Eye-catching posters, textiles with excellent prints and labels that stand out clearly, this is how brand owners, advertising companies and retailers draw attention to themselves and their products. The comprehensive range of Sappi’s Dye Sublimation Papers, Inkjet Papers and Silicone Base Papers form the perfect basis for impressive brand communication. Customers and potential customers can come and convince themselves at this year’s FESPA event in Madrid, which takes place from 24 to 27 March.

Paper with impressive sustainable qualities
At its large exhibition stand in the Digital Printing hall, Sappi will showcase its Transjet range, which represents highest quality and optimal cost efficiency, offering also environmental advantages, such as low ink consumption and low transfer times. Minimal shrinkage of high elastic textiles is one of the key features of the Sportsline tacky grades. The special Transjet Drive, its extremely smooth backside and fast ink drying on the printable side, allow more efficient production on high-speed printers with glue belt systems. Sappi stands for much more than just the highest paper quality. Professional support through a special team of technical application engineers, Digital Solutions assist customers from their initial product idea to final production ensuring impressive results.

Differentiation through precision and sharpness
With its range of Inkjet papers, Sappi will demonstrate its considerable expertise in large format digital printing in Madrid. At the heart of the exhibition presentation is Scrolljet, a multi-layered coated paper for a wide range of outdoor applications, such as city light and mega light scrolling systems. DT-Plot and Swiss Matt are the best choice for graphic drawings and poster printing due to their exceptional colour results and the high precision and sharpness of the print.

Everything from a single, innovative source
When it comes to making classic packaging, shelf-ready packaging and POS displays stand out from the rest, marketing managers, brand owners and designers can always count on Fusion Topliner with its high degree of whiteness. As the topliner reproduces colours brilliantly and can be processed excellently, products made with this clearly stand out and attract attention. The product range presented by the paper and paperboard specialist is topped off by Silicone Base Papers for self-adhesive applications such as car wrapping, outdoor advertising and office supplies. This makes Sappi a versatile, long-term partner on which customers can rely. Sappi’s paper and paperboard thus go far beyond FESPA 2020: “Where colour comes alive.”

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.