From the Sector

Reset
861 results
(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.04.2022

Montex stenter at ITM

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

The Montex stenter also benefits from full digital control, with the Qualitex 800 PLC control system providing ease of operation and rapid access to line and management data, including full operating cost overviews, as well as maintenance monitoring.

Advances in digital technology mean that there are also now significant gains to be made in the retrofitting of existing Monforts machines with the latest automatic drives and control systems, going far beyond the basic replacement of spare parts.

“We will be emphasising the robustness and versatility of the Montex stenter for essential processes such as drying, stretching, heatsetting and coating at the Istanbul show,” said Monforts Area Sales Manager Thomas Päffgen.

“With energy prices rising steeply everywhere, features such as the MonforClean system, or the EcoBooster, in which waste heat from the drying process is used to pre-heat the drying air, are proving more invaluable than ever,” added Ahmet Kilic of Neotek. “Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation.”

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection © KARL MAYER STOLL Textilmaschinenfabrik GmbH, photographer Rafael Krötz for ssawstudio.com
STOLL trend collection "WONDERFUL“
06.04.2022

"WONDERFUL" by STOLL

  • Flat knitting is one of the most versatile textile forming technologies. What is possible here is shown by STOLL's regular trend collections.
  • STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection

The latest compilation of inspiring designer pieces is entitled "WONDERFUL". On display are wonderful products designed to make the viewer pause and marvel. "WONDERFUL" shows what it means to create wonderful knitted articles. In today's world, moments of true wonder seem rare, but with the right technology, creative visions become products that inspire and amaze. With STOLL's technological solutions, wonderful product ideas can be realized for everything that is important to us: our children, our home, our appearance and our well-being.

  • Flat knitting is one of the most versatile textile forming technologies. What is possible here is shown by STOLL's regular trend collections.
  • STOLL from the KARL MAYER Group launches its new "WONDERFUL" trend collection

The latest compilation of inspiring designer pieces is entitled "WONDERFUL". On display are wonderful products designed to make the viewer pause and marvel. "WONDERFUL" shows what it means to create wonderful knitted articles. In today's world, moments of true wonder seem rare, but with the right technology, creative visions become products that inspire and amaze. With STOLL's technological solutions, wonderful product ideas can be realized for everything that is important to us: our children, our home, our appearance and our well-being.

Accordingly, the new trend collection serves different areas of application: Extraordinary STOLL-knit and wear® products in the new gauge of E 10.2 and in established gauges, such as E 7.2, inspire the market for seamless articles. Extravagant combinations of intarsia, STOLL-weave-in® and STOLL-ikat plating® techniques create novel pattern possibilities, material usages and color impressions. The possibility of individualization is supported by selected products via STOLL-autocreate®.

The trend collection causes amazement, but also stands for responsibility and environmental awareness. One chapter presents a sustainable footwear fabric solution that was created in collaboration with renowned players in textile value creation.

"WONDERFUL" was launched in March 2022. The first presentations took place in front of customers in Italy and were a great success. "Our "WONDERFUL" designs were very well received. Some customers have adopted the new pattern options contained there directly into their current collection, and ordered the necessary technical kids to convert their machines," explains Jörg Hartmann, Head of Fashion & Technology at STOLL with satisfaction.

05.04.2022

ADD-ITC 2022: Call for Abstracts

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

Further information about the conference program, plenary and keynote speakers as well as the call for abstracts are online availabel.

Source:

Aachen-Dresden-Denkendorf International Textile Conference

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

30.03.2022

Member States to nominate candidates for next IFAD President

At a time when global food security is becoming a rising concern for governments around the world, the International Fund for Agricultural Development (IFAD) today announced a call to its 177 Member States to nominate candidates for the Fund’s next President.
 
IFAD is a specialized United Nations agency and international financial institution focused on the alleviation of rural poverty and hunger.
 
The President is IFAD’s most senior position with responsibility for leading the organization and chairing its Executive Board. Nominations for President can only be made by IFAD Member States and must be received by the Secretary of IFAD no later than 6 May 2022.
 

At a time when global food security is becoming a rising concern for governments around the world, the International Fund for Agricultural Development (IFAD) today announced a call to its 177 Member States to nominate candidates for the Fund’s next President.
 
IFAD is a specialized United Nations agency and international financial institution focused on the alleviation of rural poverty and hunger.
 
The President is IFAD’s most senior position with responsibility for leading the organization and chairing its Executive Board. Nominations for President can only be made by IFAD Member States and must be received by the Secretary of IFAD no later than 6 May 2022.
 
The President will lead IFAD at a crucial time. Fears that rising food and fuel prices - worsened by the current conflict in Ukraine - could lead to a global food crisis are running high, with the world’s poorest rural people likely to be hardest hit. Small-scale producers are already reeling from the impacts of the COVID-19 pandemic, droughts, cyclones and other natural disasters. Their incomes are expected to be affected by the rising cost of inputs and disrupted markets. This is also likely to have devastating and long-term impacts on their nutrition and food security.
 
IFAD plays a crucial role in increasing the resilience of rural small-scale producers to shocks, and ensuring that they can continue to grow food and earn incomes. The Fund’s investments in climate adaptation and sustainable food systems are helping to achieve the Sustainable Development Goals to eradicate hunger and poverty.
 
Following the nomination process, the appointment of the next President will take place on 7 July 2022 during the first special session of the IFAD Governing Council. The Governing Council is IFAD's principle governing body with full decision-making powers.
 
The President of IFAD serves a four-year term, renewable once. The newly appointed President will take office on 1 October 2022.

Source:

IFAD

30.03.2022

Suominen launches BIOLACE® Zero, its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

Suominen is a pioneer in sustainable nonwovens and we have a wide range of sustainable nonwoven products for different applications. Suominen’s R&D team has excellent know-how on sustainable fibers and we are also continuously collaborating with innovative partners to develop new and innovative solutions with a reduced environmental impact into our product portfolio.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

Source:

GlobeNewswire

29.03.2022

Suominen launches its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

More information:
Suominen nonwovens Lenzing Group
Source:

Suominen

29.03.2022

SMCCreate 2022 design conference – programme available

SMCCreate 2022, the design conference jointly organized by the AVK and the European Alliance for SMC BMC takes place from 28-29 June 2022 in Antwerp, Belgium. Registrations are now possible.

This unique conference about design in SMC and BMC composite materials will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability.

Program
15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda.

SMCCreate 2022, the design conference jointly organized by the AVK and the European Alliance for SMC BMC takes place from 28-29 June 2022 in Antwerp, Belgium. Registrations are now possible.

This unique conference about design in SMC and BMC composite materials will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability.

Program
15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda.

Date and Location
The SMCCreate 2022 Conference will be organized on June 28-29, 2022 in the Hilton Hotel in Antwerp (Belgium). The presentation language will be English. The programme, further details and registration information is available at www.avk-tv.de.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) PREMIUM Exhibitions GmbH
25.03.2022

Premium Group presents: The Ground Festival

Premium Group presents its D2C festival The Ground, which premieres from 7 - 9 July at Messe Berlin. The Ground is a new event format where fashion, lifestyle, culture, and diverse perspectives are merged. It was founded to bring brands and consumers together to build a better future through celebration and collective action.

Over three days, guests from across Europe will meet up to experience innovative brand pop-ups with stories and collections, panel talks, live music, physical and mental health activations, and even step inside the Metaverse.

Power of purpose
The Ground mainly targets Gen Z which is driven by a deep sense of purpose. The 18-29 year olds expect the brands they support to share the same values. Their priorities are sustainability, relationships, health and wellness, work and education as well as inclusivity and individuality.

The Ground features six distinct areas where visitors can take part in different experiences: Sport, Beauty, Music, Play, Soul and Talk provide inspiration and many moments to learn. Fashion is featured throughout all areas and is the connecting element of The Ground.

Premium Group presents its D2C festival The Ground, which premieres from 7 - 9 July at Messe Berlin. The Ground is a new event format where fashion, lifestyle, culture, and diverse perspectives are merged. It was founded to bring brands and consumers together to build a better future through celebration and collective action.

Over three days, guests from across Europe will meet up to experience innovative brand pop-ups with stories and collections, panel talks, live music, physical and mental health activations, and even step inside the Metaverse.

Power of purpose
The Ground mainly targets Gen Z which is driven by a deep sense of purpose. The 18-29 year olds expect the brands they support to share the same values. Their priorities are sustainability, relationships, health and wellness, work and education as well as inclusivity and individuality.

The Ground features six distinct areas where visitors can take part in different experiences: Sport, Beauty, Music, Play, Soul and Talk provide inspiration and many moments to learn. Fashion is featured throughout all areas and is the connecting element of The Ground.

Special season topic: MAKE PEACE!
Building off the Good Life Goals (personal actions that everyone can take to help support the SDGs by the UN), The Ground focuses on one goal for each edition that touches people and brands at this moment in time. A goal that makes a positive contribution to the future, and is thus worth celebrating.

Due to the current conflicts in the world, this July’s goal is more clear than ever: PEACE! It will be reflected in a big charity auction of specially designed pieces of the exhibiting brands and partners.

1 ticket - 4 events
Taking place simultaneously as the trade show and conference formats SEEK, PREMIUM and FashionTech which will attract over 20,000 buyers, retailers, brands, professionals, influencers, and media to Berlin – The Ground will help to create lots of fashion buzz in the capital. The all-in-one ticket for trade visitors also guarantees access to The Ground.

Source:

PREMIUM Exhibitions GmbH     

24.03.2022

Polyester recycling: Thai Polyester ordered four VacuFil recycling systems from BB Engineering

BB Engineering GmbH (Germany), a subsidiary of Oerlikon Textile, is pleased to announce that Thai Polyester Co., Ltd (Thailand) has placed a major order for four VacuFil systems for recycling bottle flakes with connected direct spinning. The polyester manufacturer, established in 2001 and with an overall annual capacity of 316,800 tons, is one of Thailand’s leading producers and exclusively uses German technology. To this end, the company already operates Oerlikon Barmag and Oerlikon Neumag systems. The BB Engineer-ing VacuFil systems will be deployed to convert existing spinning plant equipment from processing polyester to processing PET bottle flakes without loss of performance.

BB Engineering GmbH (Germany), a subsidiary of Oerlikon Textile, is pleased to announce that Thai Polyester Co., Ltd (Thailand) has placed a major order for four VacuFil systems for recycling bottle flakes with connected direct spinning. The polyester manufacturer, established in 2001 and with an overall annual capacity of 316,800 tons, is one of Thailand’s leading producers and exclusively uses German technology. To this end, the company already operates Oerlikon Barmag and Oerlikon Neumag systems. The BB Engineer-ing VacuFil systems will be deployed to convert existing spinning plant equipment from processing polyester to processing PET bottle flakes without loss of performance.

BB Engineering supplies the complete recycling process – from the drying stage and extrusion, all the way through to the spinning plant-appropriate fine filtration stage. Thanks to decades of experi-ence in spinning plant technology, the German machine construc-tor also provides comprehensive spinning plant know-how and is aware of how the recycling process must be designed to ensure that the product manufactured using the spinning plant ultimately has the right quality. The four new VacuFil systems will be integrated into the existing building infrastructure and process landscape at Thai Polyester, with a total output of approx. 4,000 kg/h. The Vacu-Fil systems will be complemented by BB Engineering 3DD mixers for directly feeding dyes into the recycled melt flow. Commissioning has been scheduled for 2023.

Thai Polyester will be using the new VacuFil systems to manufac-ture its ‘EcoTPC’ recycling-brand yarns. 100% of these polyester yarns are produced from bottle, fiber and yarn waste and are all GRS certified.

Source:

BB Engineering

Intertextile and Yarn Expo spring show dates to be adjusted
Intertextile and Yarn Expo spring show dates to be adjusted
23.03.2022

Intertextile and Yarn Expo spring show dates to be adjusted

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 

In response to pandemic containment efforts, Intertextile Shanghai Apparel Fabrics – Spring Edition and Yarn Expo Spring will be merged with the respective Autumn Editions of the shows from 29 – 31 August, whilst Intertextile Home Textiles will also be moved to the same aforementioned dates. The fairs will still take place at the National Exhibition and Convention Center in Shanghai where they were originally due to be held from 14 – 16 April 2022.
 
Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained the decision: “In view of recent outbreaks in multiple provinces and cities in China, and to support the government’s pandemic control measures, the organisers of the fairs have decided to adjust the three spring shows by combining the Spring and Autumn Editions of Intertextile Apparel and Yarn Expo, and holding these concurrently with the Spring Edition of Intertextile Home. The decision is necessary to reduce the risk of transmission and to ensure the welfare of all our participants. We will keep in close communication with all parties involved and we look forward to providing an effective sourcing platform for the textile industry when it is safe to do so. As we continue to adapt during these challenging times, we’d like to express our thanks to all participants for their unwavering understanding and support.”
 
Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. The co-organisers of Yarn Expo are Messe Frankfurt (HK) Ltd and the Sub-Council of Textile Industry, CCPIT. Intertextile Shanghai Home Textiles is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). 

Source:

Messe Frankfurt (HK) Ltd

Photo: Ralph Koch for Mayer & Cie.
23.03.2022

Mayer & Cie.: Successful 2021 - Digitisation, Sustainability and Modernisation topics for 2022

Looking back, 2021 was a positive year for the Albstadt-based circular knitting machine and braiding machine manufacturer Mayer & Cie. After two tough years, sales exceeded Euro 100 million again last year, and the outlook for this year is promising, with production working at long-term full capacity in the circular knitting machine sector.

Looking back, 2021 was a positive year for the Albstadt-based circular knitting machine and braiding machine manufacturer Mayer & Cie. After two tough years, sales exceeded Euro 100 million again last year, and the outlook for this year is promising, with production working at long-term full capacity in the circular knitting machine sector.

In order to maintain its market edge Mayer & Cie. continues to rely on digitisation of both its processes and its products. Substantial investment at its headquarters location, especially in machinery, is on the Mayer & Cie. agenda for 2022. In the years ahead a range of production machinery – lathes, gear cutting and grinding machines – is to be replaced at a scheduled cost running into low double-digit millions. Last year saw an investment in a robot-controlled laser hardening system for heat-treating machine components. The company passes an energy upgrade milestone these days with launching its new CHP cogeneration units.  
 
“Compared with 2020, our Group sales were up by about 40 per cent in 2021,” said Mayer & Cie. Managing Director Benjamin Mayer. After two difficult years in 2019 and 2020 the circular knitting machine manufacturer was able last year to restore sales to a stable level of about 103 million Euro. And it could have achieved an even better result. “Supply chain problems hampered production perceptibly,” the company’s managing director said. “In view of the order situation up to five per cent more might have been possible.” The Albstadt textile machinery manufacturer’s order position has stayed at a sound, high level since the fourth quarter of 2020, and orders in hand will already keep the circular knitting machine division busy until the end of the year, with orders coming in from all over the world, but especially, and with no change, from the company’s core markets Turkey, China and India.

The Management views with concern, however, the conflict in the Ukraine, which at first glance may not affect the sales market directly but might lead to general purchasing restraint in the capital goods sector that like the trade war between the United States and China, which began in 2018, would also affect Mayer & Cie. In addition, effects of the conflict such as high energy prices and interruptions in material supplies and logistics pose a genuine challenge in the further course of the year.

In the braiding machine division, the order position recovered in 2021. Sales of new machines and, especially, spare parts exceeded the 2020 figures significantly. Mayer & Cie. has once more won an award for its in-house and external digitisation measures as one of the most innovative German SMEs. The textile machinery manufacturer won a 2022 Top 100 award for its innovative processes in particular.

Source:

Mayer & Cie.

22.03.2022

JEC World announces 2023 and 2024 dates

JEC World announces the dates of the show in 2023, taking place from April 25 to 27, and in 2024, from March 5 to 7, in Paris Nord Villepinte in the same halls.
Taking place every year for more than half a century, JEC World gathers the whole value chain of composite materials in Paris. The event brings together not only all major stakeholders of the composites industry but is also the place to be for innovative startups in the field of advanced materials, and for experts, academics, scientists and R&D leaders. For professionals from the various application sectors of composite materials, it is a unique showcase of what composites can offer, and an unlimited source of inspiration. So, with this two-years schedule, professionals can plan their participation while ahead to make the most out the show.

JEC World announces the dates of the show in 2023, taking place from April 25 to 27, and in 2024, from March 5 to 7, in Paris Nord Villepinte in the same halls.
Taking place every year for more than half a century, JEC World gathers the whole value chain of composite materials in Paris. The event brings together not only all major stakeholders of the composites industry but is also the place to be for innovative startups in the field of advanced materials, and for experts, academics, scientists and R&D leaders. For professionals from the various application sectors of composite materials, it is a unique showcase of what composites can offer, and an unlimited source of inspiration. So, with this two-years schedule, professionals can plan their participation while ahead to make the most out the show.

More information:
JEC Group JEC World
Source:

JEC

17.03.2022

Italian Textile Machinery at Techtextil North America 2022

The next edition of Techtextil North America will take place in Atlanta from May 17nd to 19th.  At Atlanta ACIMIT, the Association of Italian Textile Machinery Manufacturers, and Italian Trade Agency organize an Italian Pavilion, where 17 Italian machinery manufacturers involved in the production of machines for technical textiles will show their innovative solutions.

ACIMIT members exhibiting in the Italian Pavilion are: 4M Plants, Aeris, Arioli, Computer House, Fadis, Flainox, Guarneri Technology, Ima, Kairos Engineering, Mcs, Ramina, Siltex, Stalam, Testa, Willy.

The US textile industry is one of the top in US manufacturing sector, with a sales volume of exceeding US$ 64 billion in 2020, with approximately 300,000 workers and about 15,000 companies. The industry's strength lies in cotton, man-made fibers, and a wide variety of yarns and fabrics, including those for apparel and industrial uses.

The next edition of Techtextil North America will take place in Atlanta from May 17nd to 19th.  At Atlanta ACIMIT, the Association of Italian Textile Machinery Manufacturers, and Italian Trade Agency organize an Italian Pavilion, where 17 Italian machinery manufacturers involved in the production of machines for technical textiles will show their innovative solutions.

ACIMIT members exhibiting in the Italian Pavilion are: 4M Plants, Aeris, Arioli, Computer House, Fadis, Flainox, Guarneri Technology, Ima, Kairos Engineering, Mcs, Ramina, Siltex, Stalam, Testa, Willy.

The US textile industry is one of the top in US manufacturing sector, with a sales volume of exceeding US$ 64 billion in 2020, with approximately 300,000 workers and about 15,000 companies. The industry's strength lies in cotton, man-made fibers, and a wide variety of yarns and fabrics, including those for apparel and industrial uses.

In 2021, the USA represented the third market for Italian textile machinery exports, behind China and Turkey. In 2021 January-September period the value of Italian sales to US market was 93 million Euros, an increase of 74% compared to the same period of the previous year.

More information:
Techtextil North America ACIMIT
Source:

ACIMIT

Graphic: Global Fashion Agenda
17.03.2022

Global Fashion Agenda and UN Climate Change Secretariat join forces

Global Fashion Agenda (GFA), the non-profit organisation that fosters collaboration on sustainability in fashion to drive impact, has forged a new alliance with UN Climate Change secretariat (UNFCCC) to accelerate the fashion industry’s climate action.
 
The Fashion On Climate report projects that if the fashion industry does not accelerate its response to climate change, by 2030 it will produce around twice the volume of greenhouse gas emissions required to align with the Paris Agreement global warming pathways by 2050. With the urgent need for industry transformation, the new alliance between GFA and UNFCCC will accelerate the impact of the UN Fashion Industry Charter for Climate Action which aims to drive the fashion industry to net-zero emissions no later than 2050 in line with keeping global warming below 1.5 degrees.
 

Global Fashion Agenda (GFA), the non-profit organisation that fosters collaboration on sustainability in fashion to drive impact, has forged a new alliance with UN Climate Change secretariat (UNFCCC) to accelerate the fashion industry’s climate action.
 
The Fashion On Climate report projects that if the fashion industry does not accelerate its response to climate change, by 2030 it will produce around twice the volume of greenhouse gas emissions required to align with the Paris Agreement global warming pathways by 2050. With the urgent need for industry transformation, the new alliance between GFA and UNFCCC will accelerate the impact of the UN Fashion Industry Charter for Climate Action which aims to drive the fashion industry to net-zero emissions no later than 2050 in line with keeping global warming below 1.5 degrees.
 
The collaboration will be activated around the organisations’ prestigious forums including GFA’s Global Fashion Summit and UNFCCC’s annual Conference of Parties (COP). Through these forums, the organisations will collaborate to unite fashion leaders and core stakeholders to facilitate knowledge sharing, impactful partnerships, and the implementation of bold actions needed to meet the Fashion Charter targets.
 
Global Fashion Summit: Copenhagen Edition 2022, the leading international forum for sustainability in fashion, will take place on 7-8 June in the grand setting of the Royal Opera House, Copenhagen, Denmark. Under the theme ‘Alliances For a New Era’ - the Summit will endeavour to form previously inconceivable alliances within the fashion industry and also examine atypical cross-industry alliances, in a bid to accelerate the transition to a net positive reality.
 
UNFCCC will, through the Fashion Charter, contribute to the Summit content, where they will share insights on its progress and what further solutions are needed. UNFCCC will also hold its annual Fashion Charter meeting at the Summit, where the organisations will convene relevant experts to join resources and discuss tools that can enable the sector to achieve its climate targets laid out in the charter. The alliance will also continue for future editions Global Fashion Summit in other locations, in addition to Copenhagen.
 
Beyond the Summit, GFA and UNFCCC will continue to work together to elevate publications and reports, such as the Fashion CEO Agenda, and inform Fashion Charter meetings during COP27 to raise awareness among leaders on the most pressing issues and priorities and urging commitments from industry leaders to drive change within social, environmental and circular dimensions.
 
Federica Marchionni, CEO, Global Fashion Agenda, says: “GFA is striving to create impactful alliances that can accelerate the fashion industry’s transition to a net zero reality. We are therefore thrilled to be collaborating with UNFCCC as its Fashion Charter is an essential tool to mobilise the necessary industry transformation. Through our collaboration, we hope to bring together core fashion stakeholders, foster pre-competitive collaboration and provide even deeper insights and guidance to advance progress.”
 
Niclas Svenningsen, Climate Action manager, UNFCCC, says, “We are excited for this opportunity to reinforce our collaboration with the Global Fashion Agenda. The climate crisis is today the paramount issue for the fashion sector to address. While the Fashion Charter brings together a wide range of stakeholders to work collaboratively on solutions, the Global Fashion Agenda is an important venue for broader sustainability discussions in the fashion sector. We see many opportunities for further strengthening and highlighting both the sustainability and the climate work through this collaboration.”

16.03.2022

TMAS: TEXO AB sees Demand for Compfelt Weaving Looms

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

Paper machines
The demand for such machines comes from the suppliers of paper machine clothing (PMC) to paper mills, who in turn operate colossal machines for paper manufacturing.
On of the largest paper making machines is currently believed to be located on Hainan Island off the southern coast of China and is 428 metres long – roughly the length of four football pitches. Naturally, such machines require equally large-scale components, which is where TEXO comes in. All paper machines require a regular supply of PMC fabrics which are employed in three separate areas of the paper machine – the forming section, the press section and the drying section.

Press felts
TEXO Compfelt weaving machines are specifically employed for the production of endless (tubular) woven base fabrics for the press section of paper machines, where water is mechanically removed from the newly formed sheet of fibres. In the simplest press, the sheet is carried by the PMC fabric between two rolls, where water is squeezed out by the application of load and pressure. This can also be assisted by the use of vacuum and heat. The PMC fabrics here need to be replaced regularly, with a maximum lifespan of six months.

Press felts have become increasingly sophisticated over the years, consisting of complex woven base structures which are subsequently combined with nonwovens via needlepunching on equally huge machines. The woven base fabrics are primarily made from polyamide for its strength and hygroscopic and elastic properties.

Dobby harness
“A major refinement of the machine has been the ability to equip it with up to 24 dobby harness frames to meet the demand for sophisticated structures from the PMC manufacturers. Although the PMC business represents a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.”

Another significant development has been that of a self supporting base pre-filled with concrete, which has eliminated the need to dig out foundations in a plant to support the machine.

Retrofits
TEXO’s looms are built to last, but technology moves forward, and the company is also currently active in the retrofitting of existing machines built as far back as the 1970s.

Integration
TEXO has also just integrated its offices and production centre at its base in Älmhult, Sweden, to create a unified 5,000 square metre site.

Source:

TMAS / AWOL Media

Stephan Sielaff appointed as new CEO of Lenzing AG – changes in the Managing Board and the Supervisory Board
Stephan Sielaff
14.03.2022

Stephan Sielaff appointed as new CEO of Lenzing AG – changes in the Managing Board and the Supervisory Board

  • Stephan Sielaff replaces interim CEO Cord Prinzhorn
  • CFO Thomas Obendrauf will not extend his contract
  • Chairman of the Supervisory Board Peter Edelmann will no longer be available as Chairman at the end of the Annual Shareholders’ Meeting
  • Cord Prinzhorn returns to Supervisory Board and will take over as Chairman

Lenzing – The Supervisory Board of Lenzing AG, the world’s leading manufacturer of wood-based cellulosic fibers, has appointed Stephan Sielaff, the former CTO/COO of Lenzing AG, as the new CEO effective April 01, 2022. He succeeds Cord Prinzhorn, who took over as interim CEO in the fourth quarter of 2021. Cord Prinzhorn will return to the Supervisory Board of Lenzing AG. The Managing Board will thus be reduced again from five to four members.

  • Stephan Sielaff replaces interim CEO Cord Prinzhorn
  • CFO Thomas Obendrauf will not extend his contract
  • Chairman of the Supervisory Board Peter Edelmann will no longer be available as Chairman at the end of the Annual Shareholders’ Meeting
  • Cord Prinzhorn returns to Supervisory Board and will take over as Chairman

Lenzing – The Supervisory Board of Lenzing AG, the world’s leading manufacturer of wood-based cellulosic fibers, has appointed Stephan Sielaff, the former CTO/COO of Lenzing AG, as the new CEO effective April 01, 2022. He succeeds Cord Prinzhorn, who took over as interim CEO in the fourth quarter of 2021. Cord Prinzhorn will return to the Supervisory Board of Lenzing AG. The Managing Board will thus be reduced again from five to four members.

More information:
Lenzing AG Stephan Sielaff
Source:

Lenzing Aktiengesellschaft

Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
CCU-2022 Award-Nominees
14.03.2022

“Best CO2 Utilisation 2022” Award Nominees

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Acies Bio (SI) – OneCarbonBio
  • Air Company (US) – Air Eau de Parfum
  • Avecom (BE) – Power To Protein
  • CleanO2 Carbon Capture Technologies (CA) – CleanO2 Soap
  • Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB (DE) – eBioCO2n Technology
  • Nordic Electrofuel (NO) – E-Fuel 1
Graphic: Premium Group
14.03.2022

Premium Group: Details of the new Event Cosmos in Berlin

For the summer events at the Berlin exhibition center, the Premium Group is relying on a new mix of fashion, business, content and entertainment.

The State of Style & Culture
The Premium Group is expanding its portfolio in the summer to include the consumer festival THE GROUND in addition to the existing PREMIUM and SEEK trade fairs and is presenting numerous innovations for the long-awaited reunion of the industry in Berlin.

The new location Messe Berlin will become the Premium Group cosmos, a holistic inspirational hub for all relevant topics related to fashion, trends, retail, lifestyle, marketing, digitization, sustainability, metaverse and more.

In July, brands and partners can also present themselves to end consumers for the first time as part of the new event THE GROUND, 'Direct to Consumer'. Consumers get access to THE GROUND, while trade visitors are invited to view the full range and be inspired throughout the site.

For the summer events at the Berlin exhibition center, the Premium Group is relying on a new mix of fashion, business, content and entertainment.

The State of Style & Culture
The Premium Group is expanding its portfolio in the summer to include the consumer festival THE GROUND in addition to the existing PREMIUM and SEEK trade fairs and is presenting numerous innovations for the long-awaited reunion of the industry in Berlin.

The new location Messe Berlin will become the Premium Group cosmos, a holistic inspirational hub for all relevant topics related to fashion, trends, retail, lifestyle, marketing, digitization, sustainability, metaverse and more.

In July, brands and partners can also present themselves to end consumers for the first time as part of the new event THE GROUND, 'Direct to Consumer'. Consumers get access to THE GROUND, while trade visitors are invited to view the full range and be inspired throughout the site.

PREMIUM: New tripartition with new segments
In order to be able to show all relevant segments of advanced contemporary fashion even better and more holistically, the PREMIUM portfolio will be divided into three new areas from the summer. With the segmentation into High, Icon & Volume, large, commercially successful brands as well as more focused designer brands, newcomers and smaller innovators will now find their place. Here the PREMIUM fashion team advises all partners in detail in order to guarantee ideal positioning and the possibility of storytelling.

SEEK: Premiere of the SEEK Conscious Club
Sustainability has been part of the culture of the SEEK brand since it was founded 12 years ago. With the new SEEK Conscious Club, in addition to the SEEK area with well-known and new SEEKERS, a dedicated area for sustainable brands is being created. SEEK offers them the stage and space to grow and the attention to optimally spread brand values. The international SEEK community is represented by niche brands as well as commercially successful players. And the established TRADE UNION for brands with a particularly sharp sales strategy will once again have an exclusive area in the new location.

THE GROUND: Festival for Style & Culture
With the new Direct to Consumer Festival THE GROUND, the Premium Group is now also inviting Gen-Z, Gen-Y and Culture Pioneers once a year. Music acts, panels and live talks with well-known speakers and influencers, creative workshops, sports and wellbeing sessions are intended to inspire, enrich, enlighten and inspire exchange: entertainment, edutainment and experiences.

THE GROUND turns live streams into live encounters, consumers into co-creators and classic retailers into strategic marketing and event partners. Here, through emotional experiences and unique showcases, brands can be experienced and interested customers become loyal brand fans. Topics relevant to society and generations, such as fashion, sports, beauty & well-being, metaverse & gaming, will be featured in the area as well as in talks and master classes as part of the FASHIONTECH content format.

"In order to remain sustainable, we want and need to merge B2B and D2C and create a place - a marketplace for ideas and products - where brands, retailers and consumers come together and learn from each other. For the first time, we are offering holistic reach, synergy and network effects,” explains Jörg Arntz, Managing Director Premium Group.

“B2B and D2C will take place in parallel on one site, although of course there will still be an area for professionals only, i.e. exclusively for the industry. The D2C area is accessible to both end consumers and trade visitors. In addition to our trade fairs, we create new content from which our visitors and exhibitors benefit.”

During the event, which will take place from Thursday to Saturday for the first time, it will be about exchange, trends, inspiration and emotion, new brands, the further development of well-known players, creative collection presentations and of course what the fashion world and its protagonists * inside: joy and passion. In order for this to work and for the long-term existence of the new event concept in Berlin to be guaranteed, everyone involved is asked, challenged and responsible.
 
Selected brand highlights:
American Vintage // Aigner // At.p.Co  // Ben Sherman // Blue de Geñes // Buffalo // Camper // C.O.F. Studio // Copenhagen Studios // Coster Copenhagen // Crep Protect // Denham // Dstrezzed // Drykorn // Ecoalf 1.0 //  Edwin // Ellesse // Fabienne Chapot //  Fleurs de Bagne // Floris Van Bommel // Gant //  Happy Socks // Helene Galwas // Herrlicher // Hiltl //  Horizn Studios // Ilse Jacobsen // Izipizi Paris // Kangaroos // Kennel & Schmenger Schuhmanufaktur // Keen // K-Swiss // Lee // Merz b. Schwanen // Moss Copenhagen // Nautica  // Novesta // Nudie Jeans //  O My Bag // Pantofola D’Oro 1886  // People of Shibuya // Palladium // Pendleton Woolen Mills // Puma // Property Of //  Reyn Spooner // Sandqvist // Saucony // Studio Seidensticker // Stutterheim // Sofie Schnoor // Steve Madden // Thinking Mu // Ucon Acrobatics //  Uniform Bridge // Veja // Womsh // Wool & Co // Wrangler// Yaya // Zespá

Source:

Premium Group

Photo: Pixabay
10.03.2022

Carbios: White PET fiber from colored textile waste

  • Carbios has succeeded in producing a 100% enzymatically recycled white PET fiber from colored textile waste
  • At the same time, the company has produced the first 100% recycled PET bottles, that have successfully passed the food contact validation tests, from the same textile waste.
  • Carbios received €827,200 for the validation of this final technical stage of the project co-funded by ADEME

Carbios announced the validation of the 3rd and final technical step of the CE-PET research project, co-funded by ADEME3 (France’s Environment and Energy Management Agency), for which Carbios is the lead partner alongside its academic partner TWB. This achievement confirms, once again, the full potential and breadth of Carbios’ enzymatic recycling process, C-ZYME™. This breakthrough innovation makes it possible to produce a wide variety of products of equivalent quality to those of petro-sourced origin from any PET waste, including textiles.
 
The first white PET fiber recycled enzymatically from colored textile waste

  • Carbios has succeeded in producing a 100% enzymatically recycled white PET fiber from colored textile waste
  • At the same time, the company has produced the first 100% recycled PET bottles, that have successfully passed the food contact validation tests, from the same textile waste.
  • Carbios received €827,200 for the validation of this final technical stage of the project co-funded by ADEME

Carbios announced the validation of the 3rd and final technical step of the CE-PET research project, co-funded by ADEME3 (France’s Environment and Energy Management Agency), for which Carbios is the lead partner alongside its academic partner TWB. This achievement confirms, once again, the full potential and breadth of Carbios’ enzymatic recycling process, C-ZYME™. This breakthrough innovation makes it possible to produce a wide variety of products of equivalent quality to those of petro-sourced origin from any PET waste, including textiles.
 
The first white PET fiber recycled enzymatically from colored textile waste
Worldwide, around 90 million tons of PET are produced each year, more than 2/3 of which are used to manufacture fibers. However, only 13% of textile waste is currently recycled, mainly for downcycling, i.e. for lower quality applications (such as padding, insulators or rags). By successfully manufacturing at pilot scale a white PET fiber that is 100% enzymatically recycled from colored textile waste, Carbios is paving the way for the circular economy in the textile industry.  C-ZYME™ is now on the doorstep of industrialization and will soon enable the biggest brands to move closer to their sustainability goals.
 
Emmanuel Ladent, Chief Executive Officer of Carbios: « Thanks to our breakthrough process, it will soon be possible to manufacture, on a large scale, t-shirts or bottles using polyester textile waste as raw material. This is a major breakthrough that gives value to waste that currently has little or no value. It is a concrete solution that opens up a global market of 60 million tons per year of potential raw materials and will help to reduce the use of fossil resources. »
 
Separate collection of textile waste soon to be mandatory in Europe
From 1 January 2025 the separate collection of textile waste, which is already in place in some countries, will be mandatory for all EU Member States (European Directive 2018/851 on waste).  Carbios’ process will enable this waste to be sustainably recovered and included in a true circular economy model.
 
These technological validations were carried out as part of the CE-PET research project, co-funded by ADEME3. In particular, the project aimed to develop Carbios’ enzymatic PET recycling process on textile waste. The C-ZYME™ technology is complementary to thermomechanical recycling and will make it possible to process plastic and textile waste deposits that are currently not or poorly recovered. For the validation of this stage of the project, Carbios received €827,200 (€206,800 in grants and €620,400 in repayable advances).

More information:
Carbios PET textile waste
Source:

Carbios